- 28 Feb, 2024 11 commits
-
-
Thomas Haemmerle authored
Add the binding to specify the vcc supply. We can't make it required since this would break the backward compatibility. Reviewed-by:
Conor Dooley <conor.dooley@microchip.com> Signed-off-by:
Thomas Haemmerle <thomas.haemmerle@leica-geosystems.com> Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20240219131114.134607-1-m.felsch@pengutronix.deSigned-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Arturas Moskvinas authored
Use devm_* APIs to enable/disable regulator and to register in IIO infrastructure. Signed-off-by:
Arturas Moskvinas <arturas.moskvinas@gmail.com> Link: https://lore.kernel.org/r/20240219074139.193464-2-arturas.moskvinas@gmail.comSigned-off-by:
-
Sean Rhodes authored
Implement kxj_acpi_orientation to retrieve mount matrix from ACPI ROTM method Cc: Jonathan Cameron <jic23@kernel.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de> Signed-off-by:
Sean Rhodes <sean@starlabs.systems> Link: https://lore.kernel.org/r/19d7a10aae5238a2c8db37da1f74edb86480e17e.1708293140.git.sean@starlabs.systemsSigned-off-by:
-
Jonathan Cameron authored
of.h was only included for this definition, so include the correct header instead. Reviewed-by:
Nuno Sa <nuno.sa@analog.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240218173323.1023703-9-jic23@kernel.orgSigned-off-by:
-
Jonathan Cameron authored
The only of specific definition used is of_device_id table and that is found in mod_devicetable.h not of.h Reviewed-by:
-
Jonathan Cameron authored
The only of specific definition used is of_device_id table and that is found in mod_devicetable.h not of.h Reviewed-by:
-
Jonathan Cameron authored
The only of specific definition used is of_device_id table and that is found in mod_devicetable.h not of.h Reviewed-by:
-
Jonathan Cameron authored
of.h was only included to get access to this structure, so include the correct header directly instead. Reviewed-by:
-
Jonathan Cameron authored
The only of specific definition used is of_device_id table and that is found in mod_devicetable.h not of.h Reviewed-by:
-
Jonathan Cameron authored
Nothing from linux/of.h used in this driver. Reviewed-by:
-
Jonathan Cameron authored
Nothing from linux/of.h is used in this driver. Reviewed-by:
-
- 25 Feb, 2024 1 commit
-
-
Greg Kroah-Hartman authored
Merge tag 'iio-for-6.9a' of http://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: IIO: 1st set of new device support, features and cleanup for 6.9 IIO Backend support =================== New approach from Nuno Sa to the problem of reuse of drivers with IIO devices that are actually the combination of a highspeed chip and an FPGA core handling the data capture and flows. It will hopefully also apply to some other split designs. The ad9467 and axi-adi drivers are converted over to this framework. New device support ================== adi,admfm2000 - New driver for this dual microwave down converter. ams,as73211 - Add support for as7331 UV sensor. richtek,rtq6056 - Add support for related parts RTQ6053 and RTQ6059 st,lsm6dsx - Add ASM330LHHXG1 accelerometer and gyro support (mainly IDs) ti,ads1298 - New driver for this medical ADC. Features ======== tests - Unit tests for the gain-time-scale helper library. bosch,bmi088 - I2C support. bosh,bmi160 - Add 10EC5280 ACPI ID. Used in a number of devices that won't get fixed. The ID is actually a PCI ID belonging to realtech. No response was received to earlier attempts to notify them of this. The manufacturers of some devices have replied to say they will not fix this incorrect ID. Add the ID and hope it isn't a problem. bosch,bmi323 - Add BOSC0200 ACPI ID. Note this is a duplicate of one in the bmc150 driver (it appears these parts share a windows driver). Both drivers perform an ID check that is safe on the other part before successfully probing. hid-sensors-als - Add color temperature and chromaticity support. Note this is a replacement for the series reverted in 6.8 that correctly handles all the potential channel combinations. honeywell,hsc030pa - Triggered buffer support (after driver cleanup). honeywell,mprls00025pa - Improved error handling. - New DT binding to allow use of part number triplet as provided in data sheet to specify equivalent of most of the binding more efficiently. - SPI support. memsic,mxc4005 - ACPI ID MDA6655 as seen in the Chuwi Minibook X 2023 ti,hdc3020 - Add threshold event support (after some driver cleanup) veml,vcnl4000 - Switch to high resolution proximity measurement. Cleanup ======= Various minor typo fixes and better use of defines etc. Treewide - Stop using ACPI_PTR(). The savings in space are small and not worth the complexity of __maybe_unused of ifdef guards. To avoid use in new IIO drivers based on copy and paste, clean it out. - cleanup.h based handling of iio_device_claim_direct_mode()/ iio_device_release_direct_mode() using scope_cond_guard(). In many drivers this is combined with other automated cleanup to give maximum simplifications. An initial set of drivers are converted over to this infrastructure. Tools - Use rewinddir() instead of seekdir() to return to start of file. core - Make iio_bus_type constant. adi,ad16475 - Use irq_get_trigger_type() instead of opencoding. adi,ad16480 - Use irq_get_trigger_type() instead of opencoding. adi,ad-sigma-delta - Avoid overwriting IRQ flags if provided by firmware. ams,as73211 - Use IIO_VAL_FRACTIONAL for scales to simplify the code and potentially improve accuracy. gts-library - Use a div64_u64() instead of a loop to do a division. honeywell,mprls00025pa - Clean up dt-binding doc. - Drop defaults when DT binding not providing values. Very unlikely these were useful given they were wrong for vast majority of supported devices. - Whitespace cleanup miramems,da280 - Use i2c_get_match_data() to replace hand rolled ACPI matching code. semtech,sx9324 - Avoid unnecessary copying of property strings. st,lsm6dsx - Improve docs, particularly wrt to making addition of new device support less noisy. st,lsm9ds0 - Use dev_err_probe() in all probe() error handling. - Improved header includes. - Tidy up termination of ID tables. ti,ads1014 - Correct upper bound on PGA (wrong value had no actual impact) ti,afe4403/4404 - devm_ useage to simplify error handling in probe() and allow() remove to be dropped. voltage-divider - Add dt-binding for io-channel-cells to allow such a device to be both an IIO consumer and IIO producer at the same time. * tag 'iio-for-6.9a' of http://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (106 commits) iio: imu: bmi323: Add ACPI Match Table iio: accel: bmc150: Document duplicate ACPI entries with bmi323 driver iio: adc: ti-ads1298: Add driver dt-bindings: iio: adc: ti-ads1298: Add bindings iio: pressure: hsc030pa add triggered buffer iio: pressure: hsc030pa add mandatory delay iio: pressure: hsc030pa: update datasheet URLs iio: pressure: hsc030pa: include cleanup iio: pressure: hsc030pa: use signed type to hold div_64() result dt-bindings: iio: pressure: honeywell,hsc030pa.yaml add spi props iio: st_sensors: lsm9ds0: Use common style for terminator in ID tables iio: st_sensors: lsm9ds0: Don't use "proxy" headers iio: st_sensors: lsm9ds0: Use dev_err_probe() everywhere iio: adc: adi-axi-adc: move to backend framework iio: adc: ad9467: convert to backend framework iio: add the IIO backend framework iio: buffer-dmaengine: export buffer alloc and free functions of: property: add device link support for io-backends dt-bindings: adc: axi-adc: update bindings for backend framework dt-bindings: adc: ad9467: add new io-backend property ...
-
- 19 Feb, 2024 22 commits
-
-
Jonathan LoBue authored
Adds the ACPI match table for ASUS ROG ALLY to load the bmi323 driver with an ACPI match of "BOSC0200", and a comment about duplicate ACPI identifiers between devices using the bmc150 and bmi323 chips. Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Co-developed-by:
Luke D. Jones <luke@ljones.dev> Signed-off-by:
Denis Benato <benato.denis96@gmail.com> Signed-off-by:
Antheas Kapenekakis <lkml@antheas.dev> Signed-off-by:
Jonathan LoBue <jlobue10@gmail.com> Tested-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
-
Jonathan LoBue authored
Adds a description of the duplicate ACPI identifier issue between devices using bmc150 and bmi323. Reviewed-by:
-
Mike Looijmans authored
Skeleton driver for the TI ADS1298 medical ADC. This device is typically used for ECG and similar measurements. Supports data acquisition at configurable scale and sampling frequency. Reviewed-by:
Mike Looijmans <mike.looijmans@topic.nl> Link: https://lore.kernel.org/r/20240216153020.485201-2-mike.looijmans@topic.nlSigned-off-by:
-
Mike Looijmans authored
Bindings for the TI ADS1298 medical ADC. This device is typically used for ECG and similar measurements. Supports data acquisition at configurable scale and sampling frequency. The device has so many options for connecting stuff, at this point the bindings aren't nearly complete but partial bindings are better than no bindings at all. Signed-off-by:
-
Petre Rodan authored
Add triggered buffer feature. Signed-off-by:
Petre Rodan <petre.rodan@subdimension.ro> Link: https://lore.kernel.org/r/20240211075645.28777-7-petre.rodan@subdimension.roSigned-off-by:
-
Petre Rodan authored
Add a mandatory 2ms delay between consecutive chip reads. A Technical Note pdf specifies that the measurement cycle in these chips takes around 1.26ms. By adding this 2ms delay we make sure that we never get stale measurements. For more details, please see "Figure 1" in the pdf below: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/common/documents/sps-siot-sleep-mode-technical-note-008286-1-en-ciid-155793.pdfSigned-off-by:
-
Petre Rodan authored
Provide bus-specific technical datasheet in the _i2c.c _spi.c headers instead of the generic one. Signed-off-by:
-
Petre Rodan authored
Add includes based on prior reviews from Andy. Signed-off-by:
-
Petre Rodan authored
Use signed type to variable holding the result given by div_s64(). Signed-off-by:
-
Petre Rodan authored
Add spi-peripheral-props.yaml requirement needed by the spi-max-frequency property. Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
andy.shevchenko@gmail.com authored
Use common style for a terminator entry in the ID tables. Signed-off-by:
-
andy.shevchenko@gmail.com authored
Update header inclusions to follow IWYU (Include What You Use) principle. Signed-off-by:
-
andy.shevchenko@gmail.com authored
Use dev_err_probe() everywhere where it is appropriate. Signed-off-by:
-
Nuno Sa authored
Move to the IIO backend framework. Devices supported by adi-axi-adc now register themselves as backend devices. Signed-off-by:
-
Nuno Sa authored
Convert the driver to use the new IIO backend framework. The device functionality is expected to be the same (meaning no added or removed features). Also note this patch effectively breaks ABI and that's needed so we can properly support this device and add needed features making use of the new IIO framework. Given the lack of features (and devices supported) in the ad9467 driver compared with the ADI out of tree version, we don't expect any user of the upstream driver so no one should notice the ABI breakage. However, if someone is affected by this, ADI will happily support transitioning to the backend framework. Signed-off-by:
-
Nuno Sa authored
This is a Framework to handle complex IIO aggregate devices. The typical architecture is to have one device as the frontend device which can be "linked" against one or multiple backend devices. All the IIO and userspace interface is expected to be registers/managed by the frontend device which will callback into the backends when needed (to get/set some configuration that it does not directly control). The basic framework interface is pretty simple: - Backends should register themselves with @devm_iio_backend_register() - Frontend devices should get backends with @devm_iio_backend_get() Signed-off-by:
-
Nuno Sa authored
Export iio_dmaengine_buffer_free() and iio_dmaengine_buffer_alloc(). This is in preparation of introducing IIO backends support. This will allow us to allocate a buffer and control it's lifetime from a device different from the one holding the DMA firmware properties. Effectively, in this case the struct device holding the firmware information about the DMA channels is not the same as iio_dev->dev.parent (typical case). While at it, namespace the buffer-dmaengine exports and update the current user of these buffers. Signed-off-by:
-
Olivier Moysan authored
Add support for creating device links out of more DT properties. Signed-off-by:
Olivier Moysan <olivier.moysan@foss.st.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Nuno Sa authored
'adi,adc-dev' is now deprecated and must not be used anymore. Hence, also remove it from being required. The reason why it's being deprecated is because the axi-adc CORE is now an IIO service provider hardware (IIO backends) for consumers to make use of. Before, the logic with 'adi,adc-dev' was the opposite (it was kind of consumer referencing other nodes/devices) and that proved to be wrong and to not scale. Now, IIO consumers of this hardware are expected to reference it using the io-backends property. Hence, the new '#io-backend-cells' is being added so the device is easily identified as a provider. Reviewed-by:
-
Nuno Sa authored
The ad9467 will make use of the new IIO backend framework which is a provider - consumer interface where IIO backends provide services to consumers. As such, and being this device a consumer, add the new generic io-backend property to the bindings. Reviewed-by:
-
Matti Vaittinen authored
The loop based 64bit division may run for a long time when dividend is a lot bigger than the divider. Replace the division loop by the div64_u64() which implementation may be significantly faster. Tested-by:
Subhajit Ghosh <subhajit.ghosh@tweaklogic.com> Signed-off-by:
Matti Vaittinen <mazziesaccount@gmail.com> Fixes: 38416c28 ("iio: light: Add gain-time-scale helpers") Link: https://lore.kernel.org/r/Zcn-6e-0-nh2WcfU@drtxq0yyyyyyyyyyyyyby-3.rev.dnainternet.fiSigned-off-by:
-
Greg Kroah-Hartman authored
We need the iio fixes in here as well. Signed-off-by:Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 18 Feb, 2024 6 commits
-
-
Linus Torvalds authored
-
Dawei Li authored
Kernel test robot reports following sparse warnings: >> drivers/misc/eeprom/idt_89hpesx.c:599:31: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned short [addressable] [assigned] [usertype] memaddr @@ got restricted __le16 [usertype] @@ drivers/misc/eeprom/idt_89hpesx.c:599:31: sparse: expected unsigned short [addressable] [assigned] [usertype] memaddr drivers/misc/eeprom/idt_89hpesx.c:599:31: sparse: restricted __le16 [usertype] ..... For data structures needs cpu_to_le* conversion, their prototype need to be declared with __le* explicitly. Declare data structures to __le* explicitly to address the issue: - struct idt_eeprom_seq::memaddr - struct idt_csr_seq::csraddr - struct idt_csr_seq::data Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202401261250.b07Yt30Z-lkp@intel.com/Signed-off-by:
Dawei Li <dawei.li@shingroup.cn> Reviewed-by:
Serge Semin <fancer.lancer@gmail.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20240131033028.3099156-1-dawei.li@shingroup.cnSigned-off-by:
-
Colin Ian King authored
The variable range is being initialized with a value that is never read, it is being re-assigned later on. The initialization is redundant and can be removed. Cleans up clang scan build warning: drivers/comedi/drivers/das08.c:180:2: warning: Value stored to 'range' is never read [deadcode.DeadStores] Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Reviewed-by:
Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20240205180436.1841706-1-colin.i.king@gmail.comSigned-off-by:
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Reformat nested if-conditionals in Makefiles with 4 spaces - Fix CONFIG_DEBUG_INFO_BTF builds for big endian - Fix modpost for module srcversion - Fix an escape sequence warning in gen_compile_commands.py - Fix kallsyms to ignore ARMv4 thunk symbols * tag 'kbuild-fixes-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kallsyms: ignore ARMv4 thunks along with others modpost: trim leading spaces when processing source files list gen_compile_commands: fix invalid escape sequence warning kbuild: Fix changing ELF file type for output of gen_btf for big endian docs: kconfig: Fix grammar and formatting kbuild: use 4-space indentation when followed by conditionals
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Borislav Petkov: - Use a GB page for identity mapping only when memory of this size is requested so that mapping of reserved regions is prevented which would otherwise lead to system crashes on UV machines * tag 'x86_urgent_for_v6.8_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm/ident_map: Use gbpages only where full GB page should be mapped.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Borislav Petkov: - Fix GICv4.1 affinity update - Restore a quirk for ACPI-based GICv4 systems - Handle non-coherent GICv4 redistributors properly - Prevent spurious interrupts on Broadcom devices using GIC v3 architecture - Other minor fixes * tag 'irq_urgent_for_v6.8_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3-its: Fix GICv4.1 VPE affinity update irqchip/gic-v3-its: Restore quirk probing for ACPI-based systems irqchip/gic-v3-its: Handle non-coherent GICv4 redistributors irqchip/qcom-mpm: Fix IS_ERR() vs NULL check in qcom_mpm_init() irqchip/loongson-eiointc: Use correct struct type in eiointc_domain_alloc() irqchip/irq-brcmstb-l2: Add write memory barrier before exit
-
