- 22 Feb, 2024 40 commits
-
-
Muhammad Usama Anjum authored
Conform the layout, informational and status messages to TAP. No functional change is intended other than the layout of output messages. Minor cleanups have also been included. Link: https://lkml.kernel.org/r/20240202113119.2047740-4-usama.anjum@collabora.comSigned-off-by:
Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Muhammad Usama Anjum authored
Conform the layout, informational and status messages to TAP. No functional change is intended other than the layout of output messages. Link: https://lkml.kernel.org/r/20240202113119.2047740-3-usama.anjum@collabora.comSigned-off-by:
-
Muhammad Usama Anjum authored
Patch series "conform tests to TAP format output", v2. This patch (of 12): Conform the layout, informational and status messages to TAP. No functional change is intended other than the layout of output messages. While at it, convert commenting style from // to /**/. Link: https://lkml.kernel.org/r/20240202113119.2047740-1-usama.anjum@collabora.com Link: https://lkml.kernel.org/r/20240202113119.2047740-2-usama.anjum@collabora.comSigned-off-by:
-
Suren Baghdasaryan authored
Current implementation of UFFDIO_MOVE fails to move zeropages and returns EBUSY when it encounters one. We can handle them by mapping a zeropage at the destination and clearing the mapping at the source. This is done both for ordinary and for huge zeropages. Link: https://lkml.kernel.org/r/20240131175618.2417291-1-surenb@google.comSigned-off-by:
Suren Baghdasaryan <surenb@google.com> Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/202401300107.U8iMAkTl-lkp@intel.com/ Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Brian Geffon <bgeffon@google.com> Cc: Christian Brauner <brauner@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jann Horn <jannh@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Nicolas Geoffray <ngeoffray@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Shuah Khan <shuah@kernel.org> Cc: ZhangPeng <zhangpeng362@huawei.com> Signed-off-by:
-
Daniel Gomez authored
XArray multi-index entries do not keep track of the order stored once the entry is being marked as used with cmpxchg (conditionally replaced with NULL). Add a test to check the order is actually lost. The test also verifies the order and entries for all the tied indexes before and after the NULL replacement with xa_cmpxchg. Add another entry at 1 << order that keeps the node around and the order information for the NULL-entry after xa_cmpxchg. Link: https://lkml.kernel.org/r/20240131225125.1370598-3-mcgrof@kernel.orgSigned-off-by:
Daniel Gomez <da.gomez@samsung.com> Signed-off-by:
Luis Chamberlain <mcgrof@kernel.org> Cc: Darrick J. Wong <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Pankaj Raghav <p.raghav@samsung.com> Signed-off-by:
-
Luis Chamberlain authored
Patch series "test_xarray: advanced API multi-index tests", v2. This is a respin of the test_xarray multi-index tests [0] which use and demonstrate the advanced API which is used by the page cache. This should let folks more easily follow how we use multi-index to support for example a min order later in the page cache. It also lets us grow the selftests to mimic more of what we do in the page cache. This patch (of 2): The multi index selftests are great but they don't replicate how we deal with the page cache exactly, which makes it a bit hard to follow as the page cache uses the advanced API. Add tests which use the advanced API, mimicking what we do in the page cache, while at it, extend the example to do what is needed for min order support. [mcgrof@kernel.org: fix soft lockup for advanced-api tests] Link: https://lkml.kernel.org/r/20240216194329.840555-1-mcgrof@kernel.org [akpm@linux-foundation.org: s/i/loops/, make non-static] [akpm@linux-foundation.org: restore static storage for loop counter] Link: https://lkml.kernel.org/r/20240131225125.1370598-1-mcgrof@kernel.org Link: https://lkml.kernel.org/r/20240131225125.1370598-2-mcgrof@kernel.orgSigned-off-by:
-
Anshuman Khandual authored
Invalid cma_alloc() input scenarios - including excess allocation request should neither be counted as CMA_ALLOC_FAIL nor 'cma->nr_pages_failed' be updated when applicable with CONFIG_CMA_SYSFS. This also drops 'out' jump label which has become redundant. Link: https://lkml.kernel.org/r/20240201023714.3871061-1-anshuman.khandual@arm.comSigned-off-by:
Anshuman Khandual <anshuman.khandual@arm.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
-
Christophe Leroy authored
Add a readable attribute in debugfs to trigger a W^X pages check at any time. To trigger the test, just read /sys/kernel/debug/check_wx_pages It will report FAILED if the test failed, SUCCESS otherwise. Detailed result is provided into dmesg. Link: https://lkml.kernel.org/r/e947fb1a9f3f5466344823e532d343ff194ae03d.1706610398.git.christophe.leroy@csgroup.euSigned-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Greg KH <greg@kroah.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Phong Tran <tranmanphong@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Steven Price <steven.price@arm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by:
-
Christophe Leroy authored
Have ptdump_check_wx() return true when the check is successful or false otherwise. [akpm@linux-foundation.org: fix a couple of build issues (x86_64 allmodconfig)] Link: https://lkml.kernel.org/r/7943149fe955458cb7b57cd483bf41a3aad94684.1706610398.git.christophe.leroy@csgroup.euSigned-off-by:
-
Christophe Leroy authored
Following patch will use ptdump_check_wx() regardless of CONFIG_DEBUG_WX, so define it at all times on powerpc and s390 just like other architectures. Though keep the WARN_ON_ONCE() only when CONFIG_DEBUG_WX is set. Link: https://lkml.kernel.org/r/07bfb04c7fec58e84413e91d2533581be357a696.1706610398.git.christophe.leroy@csgroup.euSigned-off-by:
-
Christophe Leroy authored
All architectures using the core ptdump functionality also implement CONFIG_DEBUG_WX, and they all do it more or less the same way, with a function called debug_checkwx() that is called by mark_rodata_ro(), which is a substitute to ptdump_check_wx() when CONFIG_DEBUG_WX is set and a no-op otherwise. Refactor by centrally defining debug_checkwx() in linux/ptdump.h and call debug_checkwx() immediately after calling mark_rodata_ro() instead of calling it at the end of every mark_rodata_ro(). On x86_32, mark_rodata_ro() first checks __supported_pte_mask has _PAGE_NX before calling debug_checkwx(). Now the check is inside the callee ptdump_walk_pgd_level_checkwx(). On powerpc_64, mark_rodata_ro() bails out early before calling ptdump_check_wx() when the MMU doesn't have KERNEL_RO feature. The check is now also done in ptdump_check_wx() as it is called outside mark_rodata_ro(). Link: https://lkml.kernel.org/r/a59b102d7964261d31ead0316a9f18628e4e7a8e.1706610398.git.christophe.leroy@csgroup.euSigned-off-by:
Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Greg KH <greg@kroah.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Phong Tran <tranmanphong@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Steven Price <steven.price@arm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by:
-
Christophe Leroy authored
Patch series "mm: ptdump: Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute", v2. This series refactors CONFIG_DEBUG_WX for the 5 architectures implementing CONFIG_GENERIC_PTDUMP First rename stuff in ARM which uses similar names while not implementing CONFIG_GENERIC_PTDUMP. Then define a generic version of debug_checkwx() that calls ptdump_check_wx() when CONFIG_DEBUG_WX is set. Call it immediately after calling mark_rodata_ro() instead of calling it at the end of every mark_rodata_ro(). Then implement a debugfs attribute that can be used to trigger a W^X test at anytime and regardless of CONFIG_DEBUG_WX This patch (of 5): CONFIG_DEBUG_WX is a core option defined in mm/Kconfig.debug To avoid any future conflict, rename ARM version into CONFIG_ARM_DEBUG_WX. Link: https://lore.kernel.org/lkml/20200422152656.GF676@willie-the-truck/T/#m802eaf33efd6f8d575939d157301b35ac0d4a64f Link: https://github.com/KSPP/linux/issues/35 Link: https://lkml.kernel.org/r/cover.1706610398.git.christophe.leroy@csgroup.eu Link: https://lkml.kernel.org/r/fa297aa90caeb61eee2b70c6c5897a2ab58a9562.1706610398.git.christophe.leroy@csgroup.euSigned-off-by:
-
Gregory Price authored
In the event of rebind, pol->nodemask can change at the same time as an allocation occurs. We can detect this with tsk->mems_allowed_seq and prevent a miscount or an allocation failure from occurring. The same thing happens in the allocators to detect failure, but this can prevent spurious failures in a much smaller critical section. [gourry.memverge@gmail.com: weighted interleave checks wrong parameter] Link: https://lkml.kernel.org/r/20240206192853.3589-1-gregory.price@memverge.com Link: https://lkml.kernel.org/r/20240202170238.90004-5-gregory.price@memverge.comSigned-off-by:
Gregory Price <gregory.price@memverge.com> Suggested-by:
"Huang, Ying" <ying.huang@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hasan Al Maruf <Hasan.Maruf@amd.com> Cc: Honggyu Kim <honggyu.kim@sk.com> Cc: Hyeongtak Ji <hyeongtak.ji@sk.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Rakie Kim <rakie.kim@sk.com> Cc: Ravi Jonnalagadda <ravis.opensrc@micron.com> Cc: Srinivasulu Thanneeru <sthanneeru.opensrc@micron.com> Signed-off-by:
-
Gregory Price authored
When a system has multiple NUMA nodes and it becomes bandwidth hungry, using the current MPOL_INTERLEAVE could be an wise option. However, if those NUMA nodes consist of different types of memory such as socket-attached DRAM and CXL/PCIe attached DRAM, the round-robin based interleave policy does not optimally distribute data to make use of their different bandwidth characteristics. Instead, interleave is more effective when the allocation policy follows each NUMA nodes' bandwidth weight rather than a simple 1:1 distribution. This patch introduces a new memory policy, MPOL_WEIGHTED_INTERLEAVE, enabling weighted interleave between NUMA nodes. Weighted interleave allows for proportional distribution of memory across multiple numa nodes, preferably apportioned to match the bandwidth of each node. For example, if a system has 1 CPU node (0), and 2 memory nodes (0,1), with bandwidth of (100GB/s, 50GB/s) respectively, the appropriate weight distribution is (2:1). Weights for each node can be assigned via the new sysfs extension: /sys/kernel/mm/mempolicy/weighted_interleave/ For now, the default value of all nodes will be `1`, which matches the behavior of standard 1:1 round-robin interleave. An extension will be added in the future to allow default values to be registered at kernel and device bringup time. The policy allocates a number of pages equal to the set weights. For example, if the weights are (2,1), then 2 pages will be allocated on node0 for every 1 page allocated on node1. The new flag MPOL_WEIGHTED_INTERLEAVE can be used in set_mempolicy(2) and mbind(2). Some high level notes about the pieces of weighted interleave: current->il_prev: Tracks the node previously allocated from. current->il_weight: The active weight of the current node (current->il_prev) When this reaches 0, current->il_prev is set to the next node and current->il_weight is set to the next weight. weighted_interleave_nodes: Counts the number of allocations as they occur, and applies the weight for the current node. When the weight reaches 0, switch to the next node. Operates only on task->mempolicy. weighted_interleave_nid: Gets the total weight of the nodemask as well as each individual node weight, then calculates the node based on the given index. Operates on VMA policies. bulk_array_weighted_interleave: Gets the total weight of the nodemask as well as each individual node weight, then calculates the number of "interleave rounds" as well as any delta ("partial round"). Calculates the number of pages for each node and allocates them. If a node was scheduled for interleave via interleave_nodes, the current weight will be allocated first. Operates only on the task->mempolicy. One piece of complexity is the interaction between a recent refactor which split the logic to acquire the "ilx" (interleave index) of an allocation and the actually application of the interleave. If a call to alloc_pages_mpol() were made with a weighted-interleave policy and ilx set to NO_INTERLEAVE_INDEX, weighted_interleave_nodes() would operate on a VMA policy - violating the description above. An inspection of all callers of alloc_pages_mpol() shows that all external callers set ilx to `0`, an index value, or will call get_vma_policy() to acquire the ilx. For example, mm/shmem.c may call into alloc_pages_mpol. The call stacks all set (pgoff_t ilx) or end up in `get_vma_policy()`. This enforces the `weighted_interleave_nodes()` and `weighted_interleave_nid()` policy requirements (task/vma respectively). Link: https://lkml.kernel.org/r/20240202170238.90004-4-gregory.price@memverge.comSuggested-by:Hasan Al Maruf <Hasan.Maruf@amd.com> Signed-off-by:
Rakie Kim <rakie.kim@sk.com> Signed-off-by:
Honggyu Kim <honggyu.kim@sk.com> Signed-off-by:
Hyeongtak Ji <hyeongtak.ji@sk.com> Signed-off-by:
Srinivasulu Thanneeru <sthanneeru.opensrc@micron.com> Signed-off-by:
Ravi Jonnalagadda <ravis.opensrc@micron.com> Signed-off-by:
-
Gregory Price authored
Move the use of barrier() to force policy->nodemask onto the stack into a function `read_once_policy_nodemask` so that it may be re-used. Link: https://lkml.kernel.org/r/20240202170238.90004-3-gregory.price@memverge.comSigned-off-by:
-
Rakie Kim authored
Patch series "mm/mempolicy: weighted interleave mempolicy and sysfs extension", v5. Weighted interleave is a new interleave policy intended to make use of heterogeneous memory environments appearing with CXL. The existing interleave mechanism does an even round-robin distribution of memory across all nodes in a nodemask, while weighted interleave distributes memory across nodes according to a provided weight. (Weight = # of page allocations per round) Weighted interleave is intended to reduce average latency when bandwidth is pressured - therefore increasing total throughput. In other words: It allows greater use of the total available bandwidth in a heterogeneous hardware environment (different hardware provides different bandwidth capacity). As bandwidth is pressured, latency increases - first linearly and then exponentially. By keeping bandwidth usage distributed according to available bandwidth, we therefore can reduce the average latency of a cacheline fetch. A good explanation of the bandwidth vs latency response curve: https://mahmoudhatem.wordpress.com/2017/11/07/memory-bandwidth-vs-latency-response-curve/ From the article: ``` Constant region: The latency response is fairly constant for the first 40% of the sustained bandwidth. Linear region: In between 40% to 80% of the sustained bandwidth, the latency response increases almost linearly with the bandwidth demand of the system due to contention overhead by numerous memory requests. Exponential region: Between 80% to 100% of the sustained bandwidth, the memory latency is dominated by the contention latency which can be as much as twice the idle latency or more. Maximum sustained bandwidth : Is 65% to 75% of the theoretical maximum bandwidth. ``` As a general rule of thumb: * If bandwidth usage is low, latency does not increase. It is optimal to place data in the nearest (lowest latency) device. * If bandwidth usage is high, latency increases. It is optimal to place data such that bandwidth use is optimized per-device. This is the top line goal: Provide a user a mechanism to target using the "maximum sustained bandwidth" of each hardware component in a heterogenous memory system. For example, the stream benchmark demonstrates that 1:1 (default) interleave is actively harmful, while weighted interleave can be beneficial. Default interleave distributes data such that too much pressure is placed on devices with lower available bandwidth. Stream Benchmark (vs DRAM, 1 Socket + 1 CXL Device) Default interleave : -78% (slower than DRAM) Global weighting : -6% to +4% (workload dependant) Targeted weights : +2.5% to +4% (consistently better than DRAM) Global means the task-policy was set (set_mempolicy), while targeted means VMA policies were set (mbind2). We see weighted interleave is not always beneficial when applied globally, but is always beneficial when applied to bandwidth-driving memory regions. There are 4 patches in this set: 1) Implement system-global interleave weights as sysfs extension in mm/mempolicy.c. These weights are RCU protected, and a default weight set is provided (all weights are 1 by default). In future work, we intend to expose an interface for HMAT/CDAT code to set reasonable default values based on the memory configuration of the system discovered at boot/hotplug. 2) A mild refactor of some interleave-logic for re-use in the new weighted interleave logic. 3) MPOL_WEIGHTED_INTERLEAVE extension for set_mempolicy/mbind 4) Protect interleave logic (weighted and normal) with the mems_allowed seq cookie. If the nodemask changes while accessing it during a rebind, just retry the access. Included below are some performance and LTP test information, and a sample numactl branch which can be used for testing. = Performance summary = (tests may have different configurations, see extended info below) 1) MLC (W2) : +38% over DRAM. +264% over default interleave. MLC (W5) : +40% over DRAM. +226% over default interleave. 2) Stream : -6% to +4% over DRAM, +430% over default interleave. 3) XSBench : +19% over DRAM. +47% over default interleave. = LTP Testing Summary = existing mempolicy & mbind tests: pass mempolicy & mbind + weighted interleave (global weights): pass = version history v5: - style fixes - mems_allowed cookie protection to detect rebind issues, prevents spurious allocation failures and/or mis-allocations - sparse warning fixes related to __rcu on local variables ===================================================================== Performance tests - MLC From - Ravi Jonnalagadda <ravis.opensrc@micron.com> Hardware: Single-socket, multiple CXL memory expanders. Workload: W2 Data Signature: 2:1 read:write DRAM only bandwidth (GBps): 298.8 DRAM + CXL (default interleave) (GBps): 113.04 DRAM + CXL (weighted interleave)(GBps): 412.5 Gain over DRAM only: 1.38x Gain over default interleave: 2.64x Workload: W5 Data Signature: 1:1 read:write DRAM only bandwidth (GBps): 273.2 DRAM + CXL (default interleave) (GBps): 117.23 DRAM + CXL (weighted interleave)(GBps): 382.7 Gain over DRAM only: 1.4x Gain over default interleave: 2.26x ===================================================================== Performance test - Stream From - Gregory Price <gregory.price@memverge.com> Hardware: Single socket, single CXL expander numactl extension: https://github.com/gmprice/numactl/tree/weighted_interleave_master Summary: 64 threads, ~18GB workload, 3GB per array, executed 100 times Default interleave : -78% (slower than DRAM) Global weighting : -6% to +4% (workload dependant) mbind2 weights : +2.5% to +4% (consistently better than DRAM) dram only: numactl --cpunodebind=1 --membind=1 ./stream_c.exe --ntimes 100 --array-size 400M --malloc Function Direction BestRateMBs AvgTime MinTime MaxTime Copy: 0->0 200923.2 0.032662 0.031853 0.033301 Scale: 0->0 202123.0 0.032526 0.031664 0.032970 Add: 0->0 208873.2 0.047322 0.045961 0.047884 Triad: 0->0 208523.8 0.047262 0.046038 0.048414 CXL-only: numactl --cpunodebind=1 -w --membind=2 ./stream_c.exe --ntimes 100 --array-size 400M --malloc Copy: 0->0 22209.7 0.288661 0.288162 0.289342 Scale: 0->0 22288.2 0.287549 0.287147 0.288291 Add: 0->0 24419.1 0.393372 0.393135 0.393735 Triad: 0->0 24484.6 0.392337 0.392083 0.394331 Based on the above, the optimal weights are ~9:1 echo 9 > /sys/kernel/mm/mempolicy/weighted_interleave/node1 echo 1 > /sys/kernel/mm/mempolicy/weighted_interleave/node2 default interleave: numactl --cpunodebind=1 --interleave=1,2 ./stream_c.exe --ntimes 100 --array-size 400M --malloc Copy: 0->0 44666.2 0.143671 0.143285 0.144174 Scale: 0->0 44781.6 0.143256 0.142916 0.143713 Add: 0->0 48600.7 0.197719 0.197528 0.197858 Triad: 0->0 48727.5 0.197204 0.197014 0.197439 global weighted interleave: numactl --cpunodebind=1 -w --interleave=1,2 ./stream_c.exe --ntimes 100 --array-size 400M --malloc Copy: 0->0 190085.9 0.034289 0.033669 0.034645 Scale: 0->0 207677.4 0.031909 0.030817 0.033061 Add: 0->0 202036.8 0.048737 0.047516 0.053409 Triad: 0->0 217671.5 0.045819 0.044103 0.046755 targted regions w/ global weights (modified stream to mbind2 malloc'd regions)) numactl --cpunodebind=1 --membind=1 ./stream_c.exe -b --ntimes 100 --array-size 400M --malloc Copy: 0->0 205827.0 0.031445 0.031094 0.031984 Scale: 0->0 208171.8 0.031320 0.030744 0.032505 Add: 0->0 217352.0 0.045087 0.044168 0.046515 Triad: 0->0 216884.8 0.045062 0.044263 0.046982 ===================================================================== Performance tests - XSBench From - Hyeongtak Ji <hyeongtak.ji@sk.com> Hardware: Single socket, Single CXL memory Expander NUMA node 0: 56 logical cores, 128 GB memory NUMA node 2: 96 GB CXL memory Threads: 56 Lookups: 170,000,000 Summary: +19% over DRAM. +47% over default interleave. Performance tests - XSBench 1. dram only $ numactl -m 0 ./XSBench -s XL –p 5000000 Runtime: 36.235 seconds Lookups/s: 4,691,618 2. default interleave $ numactl –i 0,2 ./XSBench –s XL –p 5000000 Runtime: 55.243 seconds Lookups/s: 3,077,293 3. weighted interleave numactl –w –i 0,2 ./XSBench –s XL –p 5000000 Runtime: 29.262 seconds Lookups/s: 5,809,513 ===================================================================== LTP Tests: https://github.com/gmprice/ltp/tree/mempolicy2 = Existing tests set_mempolicy, get_mempolicy, mbind MPOL_WEIGHTED_INTERLEAVE added manually to test basic functionality but did not adjust tests for weighting. Basically the weights were set to 1, which is the default, and it should behave the same as MPOL_INTERLEAVE if logic is correct. == set_mempolicy01 : passed 18, failed 0 == set_mempolicy02 : passed 10, failed 0 == set_mempolicy03 : passed 64, failed 0 == set_mempolicy04 : passed 32, failed 0 == set_mempolicy05 - n/a on non-x86 == set_mempolicy06 : passed 10, failed 0 this is set_mempolicy02 + MPOL_WEIGHTED_INTERLEAVE == set_mempolicy07 : passed 32, failed 0 set_mempolicy04 + MPOL_WEIGHTED_INTERLEAVE == get_mempolicy01 : passed 12, failed 0 change: added MPOL_WEIGHTED_INTERLEAVE == get_mempolicy02 : passed 2, failed 0 == mbind01 : passed 15, failed 0 added MPOL_WEIGHTED_INTERLEAVE == mbind02 : passed 4, failed 0 added MPOL_WEIGHTED_INTERLEAVE == mbind03 : passed 16, failed 0 added MPOL_WEIGHTED_INTERLEAVE == mbind04 : passed 48, failed 0 added MPOL_WEIGHTED_INTERLEAVE ===================================================================== numactl (set_mempolicy) w/ global weighting test numactl fork: https://github.com/gmprice/numactl/tree/weighted_interleave_master command: numactl -w --interleave=0,1 ./eatmem result (weights 1:1): 0176a000 weighted interleave:0-1 heap anon=65793 dirty=65793 active=0 N0=32897 N1=32896 kernelpagesize_kB=4 7fceeb9ff000 weighted interleave:0-1 anon=65537 dirty=65537 active=0 N0=32768 N1=32769 kernelpagesize_kB=4 50% distribution is correct result (weights 5:1): 01b14000 weighted interleave:0-1 heap anon=65793 dirty=65793 active=0 N0=54828 N1=10965 kernelpagesize_kB=4 7f47a1dff000 weighted interleave:0-1 anon=65537 dirty=65537 active=0 N0=54614 N1=10923 kernelpagesize_kB=4 16.666% distribution is correct result (weights 1:5): 01f07000 weighted interleave:0-1 heap anon=65793 dirty=65793 active=0 N0=10966 N1=54827 kernelpagesize_kB=4 7f17b1dff000 weighted interleave:0-1 anon=65537 dirty=65537 active=0 N0=10923 N1=54614 kernelpagesize_kB=4 16.666% distribution is correct #include <stdio.h> #include <stdlib.h> #include <string.h> int main (void) { char* mem = malloc(1024*1024*256); memset(mem, 1, 1024*1024*256); for (int i = 0; i < ((1024*1024*256)/4096); i++) { mem = malloc(4096); mem[0] = 1; } printf("done\n"); getchar(); return 0; } This patch (of 4): This patch provides a way to set interleave weight information under sysfs at /sys/kernel/mm/mempolicy/weighted_interleave/nodeN The sysfs structure is designed as follows. $ tree /sys/kernel/mm/mempolicy/ /sys/kernel/mm/mempolicy/ [1] └── weighted_interleave [2] ├── node0 [3] └── node1 Each file above can be explained as follows. [1] mm/mempolicy: configuration interface for mempolicy subsystem [2] weighted_interleave/: config interface for weighted interleave policy [3] weighted_interleave/nodeN: weight for nodeN If a node value is set to `0`, the system-default value will be used. As of this patch, the system-default for all nodes is always 1. Link: https://lkml.kernel.org/r/20240202170238.90004-1-gregory.price@memverge.com Link: https://lkml.kernel.org/r/20240202170238.90004-2-gregory.price@memverge.comSuggested-by:
-
Yajun Deng authored
Use SZ_{8K, 128K} helper macro instead of the number in init_user_reserve and reserve_mem_notifier. This is more readable. Link: https://lkml.kernel.org/r/20240131031913.2058597-1-yajun.deng@linux.devSigned-off-by:Yajun Deng <yajun.deng@linux.dev> Signed-off-by:
-
SeongJae Park authored
Update DAMON debugfs interface sections on the translated usage documents to reflect the fact that 'monitor_on' file has renamed to 'monitor_on_DEPRECATED'. Link: https://lkml.kernel.org/r/20240130013549.89538-10-sj@kernel.orgSigned-off-by:
SeongJae Park <sj@kernel.org> Reviewed-by:
Alex Shi <alexs@kernel.org> Cc: Hu Haowen <2023002089@link.tyut.edu.cn> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Shuah Khan <shuah@kernel.org> Cc: Yanteng Si <siyanteng@loongson.cn> Signed-off-by:
-
SeongJae Park authored
Update DAMON debugfs interface sections on the usage document to reflect the fact that 'monitor_on' file has renamed to 'monitor_on_DEPRECATED'. Link: https://lkml.kernel.org/r/20240130013549.89538-9-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
Kernel builders could silently enable CONFIG_DAMON_DBGFS_DEPRECATED. Users who manually check the files under the DAMON debugfs directory could notice the deprecation owing to the 'DEPRECATED' DAMON debugfs file, but there could be users who doesn't manually check the files. Make the deprecation cannot be ignored in the case by renaming 'monitor_on' file, which is essential for real use of DAMON on runtime, to 'monitor_on_DEPRECATED'. Still users who control DAMON via only user-space tool could ignore the deprecation, but that's what the tool developers should take care of. DAMON user-space tool, damo, has also made a change[1] for the purpose. [1] commit 935dae76f2aee ("_damon_args: Rename --damon_interface to --damon_interface_DEPRECATED") of https://github.com/awslabs/damo Link: https://lkml.kernel.org/r/20240130013549.89538-8-sj@kernel.orgSigned-off-by: -
SeongJae Park authored
Following change will rename 'monitor_on' DAMON debugfs file to 'monitor_on_DEPRECATED', to make the deprecation unignorable in runtime. Since it could make DAMON selftests fail and disturb future bisects, update DAMON selftests to support the change. Link: https://lkml.kernel.org/r/20240130013549.89538-7-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
Document the newly added DAMON debugfs interface deprecation notice file on the usage document. Link: https://lkml.kernel.org/r/20240130013549.89538-6-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
DAMON debugfs interface deprecation message is written twice, once for the warning, and again for DEPRECATED file's read output. De-duplicate those by defining the message as a macro and reuse. [akpm@linux-foundation.org: s/comnst/const/] Link: https://lkml.kernel.org/r/20240130013549.89538-5-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
Implement a read-only file for DAMON debugfs interface deprecation notice, to let users who manually read/write the DAMON debugfs files from their shell command line easily notice the fact. [arnd@arndb.de: fix bogus string length] Link: https://lkml.kernel.org/r/20240202124339.892862-1-arnd@kernel.org Link: https://lkml.kernel.org/r/20240130013549.89538-4-sj@kernel.orgSigned-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Alex Shi <alexs@kernel.org> Cc: Hu Haowen <2023002089@link.tyut.edu.cn> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Shuah Khan <shuah@kernel.org> Cc: Yanteng Si <siyanteng@loongson.cn> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
SeongJae Park authored
DAMON debugfs interface is deprecated. The fact has documented by commit 5445fcbc ("Docs/admin-guide/mm/damon/usage: add DAMON debugfs interface deprecation notice"). Commit 620932cd ("mm/damon/dbgfs: print DAMON debugfs interface deprecation message") further started printing a warning message when users still use it. Many people don't read documentation or kernel log, though. Make the deprecation harder to be ignored using the approach of commit eb07c4f3 ("mm/slab: rename CONFIG_SLAB to CONFIG_SLAB_DEPRECATED"). 'make oldconfig' with 'CONFIG_DAMON_DBGFS=y' will get a new prompt with the explicit deprecation notice on the name. 'make olddefconfig' with 'CONFIG_DAMON_DBGFS=y' will result in not building DAMON debugfs interface. If there is a real user of DAMON debugfs interface, they will complain the change to the builder. Link: https://lkml.kernel.org/r/20240130013549.89538-3-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
Patch series "mm/damon: make DAMON debugfs interface deprecation unignorable". DAMON debugfs interface is deprecated in February 2023, by commit 5445fcbc ("Docs/admin-guide/mm/damon/usage: add DAMON debugfs interface deprecation notice"). Make the fact unable to be easily ignored by removing an example usage from the document (patch 1), renaming the config (patch 2), adding a deprecation notice file to the debugfs directory (patches 3-5), and renaming the debugfs file that essnetial to be used for real use of DAMON (patches 6-9). This patch (of 9): DAMON tracepoints example on the DAMON usage document is using DAMON debugfs interface, which is deprecated. Use its alternative, DAMON sysfs interface. Link: https://lkml.kernel.org/r/20240130013549.89538-1-sj@kernel.org Link: https://lkml.kernel.org/r/20240130013549.89538-2-sj@kernel.orgSigned-off-by:
-
Johannes Weiner authored
shrink_memcg_cb() is called by the shrinker and is based on zswap_writeback_entry(). Move it in between. Save one fwd decl. Link: https://lkml.kernel.org/r/20240130014208.565554-21-hannes@cmpxchg.orgSigned-off-by:
Johannes Weiner <hannes@cmpxchg.org> Reviewed-by:
Nhat Pham <nphamcs@gmail.com> Cc: Chengming Zhou <zhouchengming@bytedance.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by:
-
Johannes Weiner authored
Shrinking needs writeback. Naturally, move the writeback code above the shrinking code. Delete the forward decl. Link: https://lkml.kernel.org/r/20240130014208.565554-20-hannes@cmpxchg.orgSigned-off-by:
-
Johannes Weiner authored
The per-cpu compression init/exit callbacks are awkwardly in the middle of the shrinker code. Move them up to the compression section. Link: https://lkml.kernel.org/r/20240130014208.565554-19-hannes@cmpxchg.orgSigned-off-by:
-
Johannes Weiner authored
Writeback needs to decompress. Move the (de)compression API above what will be the consolidated shrinking/writeback code. Link: https://lkml.kernel.org/r/20240130014208.565554-18-hannes@cmpxchg.orgSigned-off-by:
-
Johannes Weiner authored
The higher-level entry operations modify the tree, so move the entry API after the tree section. Link: https://lkml.kernel.org/r/20240130014208.565554-17-hannes@cmpxchg.orgSigned-off-by:
-
Johannes Weiner authored
This completes consolidation of the LRU section. Link: https://lkml.kernel.org/r/20240130014208.565554-16-hannes@cmpxchg.orgSigned-off-by:
-
Johannes Weiner authored
The zswap entry section sits awkwardly in the middle of LRU-related functions. Group the external LRU API functions first. Link: https://lkml.kernel.org/r/20240130014208.565554-15-hannes@cmpxchg.orgSigned-off-by:
-
Johannes Weiner authored
Patch series "mm: zswap: cleanups". Cleanups and maintenance items that accumulated while reviewing zswap patches. This patch (of 20): The parameters primarily control pool attributes. Move those operations up to the pool section. Link: https://lkml.kernel.org/r/20240130014208.565554-1-hannes@cmpxchg.org Link: https://lkml.kernel.org/r/20240130014208.565554-14-hannes@cmpxchg.orgSigned-off-by:
-
Johannes Weiner authored
Move the operations against the global zswap_pools list (current pool, last, find) to the pool section. Link: https://lkml.kernel.org/r/20240130014208.565554-13-hannes@cmpxchg.orgSigned-off-by:
-
Johannes Weiner authored
Move pool refcounting functions into the pool section. First the destroy functions, then the get and put which uses them. __zswap_pool_empty() has an upward reference to the global zswap_pools, to sanity check it's not the currently active pool that's being freed. That gets the forward decl for zswap_pool_current(). This puts the get and put function above all callers, so kill the forward decls as well. Link: https://lkml.kernel.org/r/20240130014208.565554-12-hannes@cmpxchg.orgSigned-off-by:
-
Johannes Weiner authored
The function ordering in zswap.c is a little chaotic, which requires jumping in unexpected directions when following related code. This is a series of patches that brings the file into the following order: - pool functions - lru functions - rbtree functions - zswap entry functions - compression/backend functions - writeback & shrinking functions - store, load, invalidate, swapon, swapoff - debugfs - init But it has to be split up such the moving still produces halfway readable diffs. In this patch, move pool allocation and freeing functions. Link: https://lkml.kernel.org/r/20240130014208.565554-11-hannes@cmpxchg.orgSigned-off-by:
-
Johannes Weiner authored
The branching is awkward and duplicates code. The comment about writeback is also misleading: yes, the entry might have been written back. Or it might have never been stored in zswap to begin with due to a rejection - zswap_invalidate() is called on all exiting swap entries. Link: https://lkml.kernel.org/r/20240130014208.565554-10-hannes@cmpxchg.orgSigned-off-by:
Yosry Ahmed <yosryahmed@google.com> Reviewed-by:
Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by:
-
Johannes Weiner authored
- Remove dupentry, reusing entry works just fine. - Rename pool to shrink_pool, as this one actually is confusing. - Remove page, use folio_nid() and kmap_local_folio() directly. - Set entry->swpentry in a common path. - Move value and src to local scope of use. Link: https://lkml.kernel.org/r/20240130014208.565554-9-hannes@cmpxchg.orgSigned-off-by:
-
Johannes Weiner authored
zswap_store() is long and mixes work at the zswap layer with work at the backend and compression layer. Move compression & backend work to zswap_compress(), mirroring zswap_decompress(). Link: https://lkml.kernel.org/r/20240130014208.565554-8-hannes@cmpxchg.orgSigned-off-by:
-
