Since devm_regmap_init_mmio_clk can fail, add return value checking.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

GPL-2.0-only is the preferred way of expressing v2 of the GPL, so switch
to that. Remove some redundant copyright notices and correct some
instances where the wrong comment type has been used in header files.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

ida instances allocate some internal memory for ->free_bitmap
in addition to the base 'struct ida'. Use ida_destroy() to release
that memory at module_exit().

Fixes: 4b45efe8 ("mfd: Add support for Intel Sunrisepoint LPSS devices")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Intel Elkhart Lake has the same LPSS than Intel Broxton.
Add the new IDs to the list of supported devices.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

<asm/olpc.h> provides machine_is_olpc() stub for CONFIG_OLPC=n,
compiler should just optimize the unneeded bits away.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Clang warns:

In file included from drivers/mfd/stmfx.c:13:
include/linux/mfd/stmfx.h:7:9: warning: 'MFD_STMFX_H' is used as a
header guard here, followed by #define of a different macro
[-Wheader-guard]

Fixes: 06252ade ("mfd: Add ST Multi-Function eXpander (STMFX) core driver")
Link: https://github.com/ClangBuiltLinux/linux/issues/475Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

ROHM BD71847 PMIC datasheet was published.
Add datasheet link for BD71847 as well.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Swap PMIC and MULTIFUNCTION words in the title to:
- show that this is about Intel PMICs
- keep MAINTAINERS properly sorted
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

With this patch, the cros_ec_ctl driver will register the legacy
accelerometer driver (named cros_ec_accel_legacy) if it fails to
register sensors through the usual path cros_ec_sensors_register().
This legacy device is present on Chromebook devices with older EC
firmware only supporting deprecated EC commands:
- Glimmer based devices [Intel SOC using LPC transport]
- Veyron minnie devices [ARM SOC using SPI transport]
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

RK805 has SLEEP signal, which can put the device into SLEEP or OFF
mode. The default is SLEEP mode.

However, when the kernel performs power-off (actually the ATF) the
device will not go fully off and this will result in higher power
consumption and inability to wake the device with RTC alarm.

The solution is to enable pm_power_off_prepare function, which will
configure SLEEP pin for OFF function.
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

The function pointer pm_power_off may point to function from other
module (PSCI for example). If rk808 is removed, pm_power_off is
overwritten to NULL and the system cannot be powered off.

This patch checks if pm_power_off points to a module function.
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

System Companion Processor (SCP) is Cortex M4 co-processor on some
MediaTek platform that can run EC-style firmware. Since a SCP and EC
would both exist on a system, and use the cros_ec_dev driver, we need to
differentiate between them for the userspace, or they would both be
registered at /dev/cros_ec, causing a conflict.
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Add a DT binding documentation for ChromeOS EC driver over rpmsg.
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

This patch adds all the core support and defines for the Cirrus
Logic CS42L92, CS47L92 and CS47L93 smart audio CODECs.

Registers or fields are named MADERA_* if it is part of the
common hardware platform and does not conflict with any other
Madera codecs. It is named CS47L15_* if it is unique to CS47L15
and conflicts with definitions on other codecs.
Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

This patch adds all the core support and defines for the Cirrus
Logic CS47L15 smart audio CODEC.

Registers or fields are named MADERA_* if it is part of the
common hardware platform and does not conflict with any other
Madera codecs. It is named CS47L15_* if it is unique to CS47L15
and conflicts with definitions on other codecs.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

This adds the cs47l15, cs42l92, cs47l92 and cs47l93 to the list of
compatible strings and updates some properties that need to note
the new CODECs.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Currently we are relying on the exact match of the regulator name to
find MICVDD, we should add an explicit supply mapping to allow this to
be found more reliably.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

regmap_read won't set val to anything if an ACKed bus fails.
Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

The pinctrl.txt file was converted into reStructuredText and moved into
driver-api folder. This patch updates the broken reference.

Fixes: 5a9b7383 ("pinctrl.txt: move it to the driver-api book")
Signed-off-by: Otto Sabart <ottosabart@seberm.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

When the driver is used with a subdevice that is disabled in the
kernel configuration, clang gets a little confused about the
control flow and fails to notice that n_subdevs is only
uninitialized when subdevs is NULL, and we check for that,
leading to a false-positive warning:

drivers/mfd/arizona-core.c:1423:19: error: variable 'n_subdevs' is uninitialized when used here
      [-Werror,-Wuninitialized]
                              subdevs, n_subdevs, NULL, 0, NULL);
                                       ^~~~~~~~~
drivers/mfd/arizona-core.c:999:15: note: initialize the variable 'n_subdevs' to silence this warning
        int n_subdevs, ret, i;
                     ^
                      = 0

Ideally, we would rearrange the code to avoid all those early
initializations and have an explicit exit in each disabled case,
but it's much easier to chicken out and add one more initialization
here to shut up the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

The logic for setting the of_node on devices created by mfd did not set
the fwnode pointer to match, which caused fwnode-based APIs to
malfunction on these devices since the fwnode pointer was null. Fix
this.
Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Easier to find and maintain if the device tables sorted by ID.
Do it here for intel-lpss MFD driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

The RTC core already has error messages in case of failure, there is no
need to have another message in the driver.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Allow overwriting the values in BD718XX_REG_PWRONCONFIG0 and
BD718XX_REG_PWRONCONFIG1 via devicetree. Read values in milliseconds and
attempt to round them to something supported by the hardware.

Keep existing values (from bootloader or OTP) if property is not
present.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-By: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
[Lee: Fixed-up merge/API conflict]
Signed-off-by: Lee Jones <lee.jones@linaro.org>

These values can be overwritten at probe time.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Acked-By: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

The reset button on imx8mm-evk is tied to PWRON_B pin of bd71847 and the
long press duration is set to zero from OTP. The linux driver overrides
those values and breaks reset from button.

Overwriting OTP or bootloader configuration with some hardcoded defaults
is not desirable, keep already programmed values instead.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Acked-By: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Register driver when EC indicates has precise lid angle calculation code
running.
Fix incorrect extra resource allocation in cros_ec_sensors_register().
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

MODULE_DEVICE_TABLE(of, <of_match_table>) should be called to complete DT
OF mathing mechanism and register it.

Before this patch:
modinfo ./drivers/mfd/madera.ko | grep alias

After this patch:
modinfo ./drivers/mfd/madera.ko | grep alias
alias:          of:N*T*Ccirrus,wm1840C*
alias:          of:N*T*Ccirrus,wm1840
alias:          of:N*T*Ccirrus,cs47l91C*
alias:          of:N*T*Ccirrus,cs47l91
alias:          of:N*T*Ccirrus,cs47l90C*
alias:          of:N*T*Ccirrus,cs47l90
alias:          of:N*T*Ccirrus,cs47l85C*
alias:          of:N*T*Ccirrus,cs47l85
alias:          of:N*T*Ccirrus,cs47l35C*
alias:          of:N*T*Ccirrus,cs47l35
Reported-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Daniel Gomez <dagmcr@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Merge branches 'ib-mfd-clk-gpio-power-regulator-rtc-5.3', 'ib-mfd-clk-regulator-rtc-5.3', 'ib-mfd-cros-5.3' and 'ib-mfd-regulator-5.3' into ibs-for-mfd-merged

Currently the LP87565_DEVICE_TYPE_LP87561_Q1 case does not have a
break statement, causing it to fall through to a dev_err message.
Fix this by adding in the missing break statement.

Addresses-Coverity: ("Missing break in switch")
Fixes: 7ee63bd7 ("regulator: lp87565: Add 4-phase lp87561 regulator support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

RK809 and RK817 are power management IC chips for multimedia products.
most of their functions and registers are same, including the clkout
funciton.
Signed-off-by: Tony Xie <tony.xie@rock-chips.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

RK809 and RK817 are power management IC chips for multimedia products.
Most of their functions and registers are same, including the rtc.
Signed-off-by: Tony Xie <tony.xie@rock-chips.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Add device tree bindings documentation for Rockchip's RK809 & RK817 PMIC.
Signed-off-by: Tony Xie <tony.xie@rock-chips.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

    Add support for the rk809 and rk817 regulator driver.
    Their specifications are as follows：
    1. The RK809 and RK809 consist of 5 DCDCs, 9 LDOs
       and have the same registers for these components except dcdc5.
    2. The dcdc5 is a boost dcdc for RK817 and is a buck for RK809.
    3. The RK817 has one switch but The Rk809 has two.

    The output voltages are configurable and are meant to supply power
    to the main processor and other components.
Signed-off-by: Tony Xie <tony.xie@rock-chips.com>
Acked-by: Mark Brown <broonie@kernel.org>
[rebased on top of 5.2-rc1]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

The RK809 and RK817 are a Power Management IC (PMIC) for multimedia
and handheld devices. They contains the following components:
  - Regulators
  - RTC
  - Clocking

Both RK809 and RK817 chips are using a similar register map,
so we can reuse the RTC and Clocking functionality.
Most of regulators have a some implementation also.
Signed-off-by: Tony Xie <tony.xie@rock-chips.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

ROHM BD70528 PMIC includes battery charger block. Support charger
staus queries and doing few basic settings like input current limit
and charging current.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Support RTC block in ROHM bd70528 power management IC. Support
getting and setting the time and date as well as arming an alarm
which can also be used to wake the PMIC from standby state.

HW supports wake interrupt only for the next 24 hours (sec, minute
and hour information only) so we limit also the alarm interrupt to
this 24 hours for the sake of consistency.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

ROHM BD70528 PMIC has 4 GPIO pins. Allow them to be
controlled by GPIO framework.

IRQs are handled by regmap-irq and GPIO driver is not
aware of the irq usage.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Document bindings for regulators (3 bucks, 3 LDOs and 2 LED
drivers) and 4 GPIO pins which can be configured for I/O or
as interrupt sources withe configurable trigger levels.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>