- 04 May, 2019 3 commits
-
-
Hans Verkuil authored
commit ed356f11 upstream. If CEC is not enabled for the vivid driver, then the adap pointer is NULL and 'adap->phys_addr' will fail. Cc: <stable@vger.kernel.org> # for v4.12 and up Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> [ Naresh: Fixed rebase conflict ] Signed-off-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gustavo A. R. Silva authored
commit 61c59355 upstream. _dev_ is being dereferenced before it is null checked, hence there is a potential null pointer dereference. Fix this by moving the pointer dereference after _dev_ has been null checked. Addresses-Coverity-ID: 1462020 Fixes: bb1b40c7 ("usbnet: ipheth: prevent TX queue timeouts when device not ready") Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Alexander Kappner authored
commit bb1b40c7 upstream. iOS devices require the host to be "trusted" before servicing network packets. Establishing trust requires the user to confirm a dialog on the iOS device.Until trust is established, the iOS device will silently discard network packets from the host. Currently, the ipheth driver does not detect whether an iOS device has established trust with the host, and immediately sets up the transmit queues. This causes the following problems: - Kernel taint due to WARN() in netdev watchdog. - Dmesg spam ("TX timeout"). - Disruption of user space networking activity (dhcpd, etc...) when new interface comes up but cannot be used. - Unnecessary host and device wakeups and USB traffic Example dmesg output: [ 1101.319778] NETDEV WATCHDOG: eth1 (ipheth): transmit queue 0 timed out [ 1101.319817] ------------[ cut here ]------------ [ 1101.319828] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:316 dev_watchdog+0x20f/0x220 [ 1101.319831] Modules linked in: ipheth usbmon nvidia_drm(PO) nvidia_modeset(PO) nvidia(PO) iwlmvm mac80211 iwlwifi btusb btrtl btbcm btintel qmi_wwan bluetooth cfg80211 ecdh_generic thinkpad_acpi rfkill [last unloaded: ipheth] [ 1101.319861] CPU: 0 PID: 0 Comm: swapper/0 Tainted: P O 4.13.12.1 #1 [ 1101.319864] Hardware name: LENOVO 20ENCTO1WW/20ENCTO1WW, BIOS N1EET62W (1.35 ) 11/10/2016 [ 1101.319867] task: ffffffff81e11500 task.stack: ffffffff81e00000 [ 1101.319873] RIP: 0010:dev_watchdog+0x20f/0x220 [ 1101.319876] RSP: 0018:ffff8810a3c03e98 EFLAGS: 00010292 [ 1101.319880] RAX: 000000000000003a RBX: 0000000000000000 RCX: 0000000000000000 [ 1101.319883] RDX: ffff8810a3c15c48 RSI: ffffffff81ccbfc2 RDI: 00000000ffffffff [ 1101.319886] RBP: ffff880c04ebc41c R08: 0000000000000000 R09: 0000000000000379 [ 1101.319889] R10: 00000100696589d0 R11: 0000000000000378 R12: ffff880c04ebc000 [ 1101.319892] R13: 0000000000000000 R14: 0000000000000001 R15: ffff880c2865fc80 [ 1101.319896] FS: 0000000000000000(0000) GS:ffff8810a3c00000(0000) knlGS:0000000000000000 [ 1101.319899] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1101.319902] CR2: 00007f3ff24ac000 CR3: 0000000001e0a000 CR4: 00000000003406f0 [ 1101.319905] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1101.319908] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1101.319910] Call Trace: [ 1101.319914] <IRQ> [ 1101.319921] ? dev_graft_qdisc+0x70/0x70 [ 1101.319928] ? dev_graft_qdisc+0x70/0x70 [ 1101.319934] ? call_timer_fn+0x2e/0x170 [ 1101.319939] ? dev_graft_qdisc+0x70/0x70 [ 1101.319944] ? run_timer_softirq+0x1ea/0x440 [ 1101.319951] ? timerqueue_add+0x54/0x80 [ 1101.319956] ? enqueue_hrtimer+0x38/0xa0 [ 1101.319963] ? __do_softirq+0xed/0x2e7 [ 1101.319970] ? irq_exit+0xb4/0xc0 [ 1101.319976] ? smp_apic_timer_interrupt+0x39/0x50 [ 1101.319981] ? apic_timer_interrupt+0x8c/0xa0 [ 1101.319983] </IRQ> [ 1101.319992] ? cpuidle_enter_state+0xfa/0x2a0 [ 1101.319999] ? do_idle+0x1a3/0x1f0 [ 1101.320004] ? cpu_startup_entry+0x5f/0x70 [ 1101.320011] ? start_kernel+0x444/0x44c [ 1101.320017] ? early_idt_handler_array+0x120/0x120 [ 1101.320023] ? x86_64_start_kernel+0x145/0x154 [ 1101.320028] ? secondary_startup_64+0x9f/0x9f [ 1101.320033] Code: 20 04 00 00 eb 9f 4c 89 e7 c6 05 59 44 71 00 01 e8 a7 df fd ff 89 d9 4c 89 e6 48 c7 c7 70 b7 cd 81 48 89 c2 31 c0 e8 97 64 90 ff <0f> ff eb bf 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 [ 1101.320103] ---[ end trace 0cc4d251e2b57080 ]--- [ 1101.320110] ipheth 1-5:4.2: ipheth_tx_timeout: TX timeout The last message "TX timeout" is repeated every 5 seconds until trust is established or the device is disconnected, filling up dmesg. The proposed patch eliminates the problem by, upon connection, keeping the TX queue and carrier disabled until a packet is first received from the iOS device. This is reflected by the confirmed_pairing variable in the device structure. Only after at least one packet has been received from the iOS device, the transmit queue and carrier are brought up during the periodic device poll in ipheth_carrier_set. Because the iOS device will always send a packet immediately upon trust being established, this should not delay the interface becoming useable. To prevent failed UBRs in ipheth_rcvbulk_callback from perpetually re-enabling the queue if it was disabled, a new check is added so only successful transfers re-enable the queue, whereas failed transfers only trigger an immediate poll. This has the added benefit of removing the periodic control requests to the iOS device until trust has been established and thus should reduce wakeup events on both the host and the iOS device. Signed-off-by:
Alexander Kappner <agk@godking.net> Signed-off-by:
-
- 02 May, 2019 37 commits
-
-
Greg Kroah-Hartman authored
-
Diana Craciun authored
commit 26cb1f36 upstream. Currently only supported on powerpc. Signed-off-by:
Diana Craciun <diana.craciun@nxp.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Diana Craciun authored
commit e59f5bd7 upstream. Signed-off-by:
-
Peter Oskolkov authored
[ Upstream commit 997dd964 ] Currently, IPv6 defragmentation code drops non-last fragments that are smaller than 1280 bytes: see commit 0ed4229b ("ipv6: defrag: drop non-last frags smaller than min mtu") This behavior is not specified in IPv6 RFCs and appears to break compatibility with some IPv6 implemenations, as reported here: https://www.spinics.net/lists/netdev/msg543846.html This patch re-uses common IP defragmentation queueing and reassembly code in IP6 defragmentation in nf_conntrack, removing the 1280 byte restriction. Signed-off-by:
Peter Oskolkov <posk@google.com> Reported-by:
Tom Herbert <tom@herbertland.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Signed-off-by:
-
Peter Oskolkov authored
[ Upstream commit d4289fcc ] Currently, IPv6 defragmentation code drops non-last fragments that are smaller than 1280 bytes: see commit 0ed4229b ("ipv6: defrag: drop non-last frags smaller than min mtu") This behavior is not specified in IPv6 RFCs and appears to break compatibility with some IPv6 implemenations, as reported here: https://www.spinics.net/lists/netdev/msg543846.html This patch re-uses common IP defragmentation queueing and reassembly code in IPv6, removing the 1280 byte restriction. Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 70b095c8 ] IPV6=m DEFRAG_IPV6=m CONNTRACK=y yields: net/netfilter/nf_conntrack_proto.o: In function `nf_ct_netns_do_get': net/netfilter/nf_conntrack_proto.c:802: undefined reference to `nf_defrag_ipv6_enable' net/netfilter/nf_conntrack_proto.o:(.rodata+0x640): undefined reference to `nf_conntrack_l4proto_icmpv6' Setting DEFRAG_IPV6=y causes undefined references to ip6_rhash_params ip6_frag_init and ip6_expire_frag_queue so it would be needed to force IPV6=y too. This patch gets rid of the 'followup linker error' by removing the dependency of ipv6.ko symbols from netfilter ipv6 defrag. Shared code is placed into a header, then used from both. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Peter Oskolkov authored
[ Upstream commit c23f35d1 ] This is a refactoring patch: without changing runtime behavior, it moves rbtree-related code from IPv4-specific files/functions into .h/.c defrag files shared with IPv6 defragmentation code. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 415787d7 ] lockdep does not know that the locks used by IPv4 defrag and IPv6 reassembly units are of different classes. It complains because of following chains : 1) sch_direct_xmit() (lock txq->_xmit_lock) dev_hard_start_xmit() xmit_one() dev_queue_xmit_nit() packet_rcv_fanout() ip_check_defrag() ip_defrag() spin_lock() (lock frag queue spinlock) 2) ip6_input_finish() ipv6_frag_rcv() (lock frag queue spinlock) ip6_frag_queue() icmpv6_param_prob() (lock txq->_xmit_lock at some point) We could add lockdep annotations, but we also can make sure IPv6 calls icmpv6_param_prob() only after the release of the frag queue spinlock, since this naturally makes frag queue spinlock a leaf in lock hierarchy. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
ZhangXiaoxu authored
[ Upstream commit 19fad20d ] There is a UBSAN report as below: UBSAN: Undefined behaviour in net/ipv4/tcp_input.c:2877:56 signed integer overflow: 2147483647 * 1000 cannot be represented in type 'int' CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.1.0-rc4-00058-g582549e3 #1 Call Trace: <IRQ> dump_stack+0x8c/0xba ubsan_epilogue+0x11/0x60 handle_overflow+0x12d/0x170 ? ttwu_do_wakeup+0x21/0x320 __ubsan_handle_mul_overflow+0x12/0x20 tcp_ack_update_rtt+0x76c/0x780 tcp_clean_rtx_queue+0x499/0x14d0 tcp_ack+0x69e/0x1240 ? __wake_up_sync_key+0x2c/0x50 ? update_group_capacity+0x50/0x680 tcp_rcv_established+0x4e2/0xe10 tcp_v4_do_rcv+0x22b/0x420 tcp_v4_rcv+0xfe8/0x1190 ip_protocol_deliver_rcu+0x36/0x180 ip_local_deliver+0x15b/0x1a0 ip_rcv+0xac/0xd0 __netif_receive_skb_one_core+0x7f/0xb0 __netif_receive_skb+0x33/0xc0 netif_receive_skb_internal+0x84/0x1c0 napi_gro_receive+0x2a0/0x300 receive_buf+0x3d4/0x2350 ? detach_buf_split+0x159/0x390 virtnet_poll+0x198/0x840 ? reweight_entity+0x243/0x4b0 net_rx_action+0x25c/0x770 __do_softirq+0x19b/0x66d irq_exit+0x1eb/0x230 do_IRQ+0x7a/0x150 common_interrupt+0xf/0xf </IRQ> It can be reproduced by: echo 2147483647 > /proc/sys/net/ipv4/tcp_min_rtt_wlen Fixes: f6722583 ("tcp: track min RTT using windowed min-filter") Signed-off-by:
ZhangXiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by:
-
Vinod Koul authored
[ Upstream commit b561af36 ] stmmac_check_ether_addr() checks the MAC address and assigns one in driver open(). In many cases when we create slave netdevice, the dev addr is inherited from master but the master dev addr maybe NULL at that time, so move this call to driver probe so that address is always valid. Signed-off-by:
Xiaofei Shen <xiaofeis@codeaurora.org> Tested-by:
Sneh Shah <snehshah@codeaurora.org> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Hangbin Liu authored
[ Upstream commit 925b0c84 ] If we add a bond device which is already the master of the team interface, we will hold the team->lock in team_add_slave() first and then request the lock in team_set_mac_address() again. The functions are called like: - team_add_slave() - team_port_add() - team_port_enter() - team_modeop_port_enter() - __set_port_dev_addr() - dev_set_mac_address() - bond_set_mac_address() - dev_set_mac_address() - team_set_mac_address Although team_upper_dev_link() would check the upper devices but it is called too late. Fix it by adding a checking before processing the slave. v2: Do not split the string in netdev_err() Fixes: 3d249d4c ("net: introduce ethernet teaming device") Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Zhu Yanjun authored
[ Upstream commit 4b9fc714 ] Before the commit 490ea596 ("RDS: IB: move FMR code to its own file"), when the dirty_count is greater than 9/10 of max_items of 8K pool, 1M pool is used, Vice versa. After the commit 490ea596 ("RDS: IB: move FMR code to its own file"), the above is removed. When we make the following tests. Server: rds-stress -r 1.1.1.16 -D 1M Client: rds-stress -r 1.1.1.14 -s 1.1.1.16 -D 1M The following will appear. " connecting to 1.1.1.16:4000 negotiated options, tasks will start in 2 seconds Starting up..header from 1.1.1.166:4001 to id 4001 bogus .. tsks tx/s rx/s tx+rx K/s mbi K/s mbo K/s tx us/c rtt us cpu % 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 ... " So this exchange between 8K and 1M pool is added back. Fixes: commit 490ea596 ("RDS: IB: move FMR code to its own file") Signed-off-by:
Zhu Yanjun <yanjun.zhu@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Erez Alfasi authored
[ Upstream commit ace329f4 ] Querying EEPROM high pages data for SFP module is currently not supported by our driver and yet queried, resulting in invalid FW queries. Set the EEPROM ethtool data length to 256 for SFP module will limit the reading for page 0 only and prevent invalid FW queries. Fixes: bb64143e ("net/mlx5e: Add ethtool support for dump module EEPROM") Signed-off-by:
Erez Alfasi <ereza@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Amit Cohen authored
[ Upstream commit 151f0ddd ] If link is down and autoneg is set to on/off, the status in ethtool does not change. The reason is when the link is down the function returns with zero before changing autoneg value. Move the checking of link state (up/down) to be performed after setting autoneg value, in order to be sure that autoneg will change in any case. Fixes: 56ade8fe ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by:
Amit Cohen <amitc@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Acked-by:
-
Eric Dumazet authored
[ Upstream commit 20ff83f1 ] Before calling __ip_options_compile(), we need to ensure the network header is a an IPv4 one, and that it is already pulled in skb->head. RAW sockets going through a tunnel can end up calling ipv4_link_failure() with total garbage in the skb, or arbitrary lengthes. syzbot report : BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:355 [inline] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123 Write of size 69 at addr ffff888096abf068 by task syz-executor.4/9204 CPU: 0 PID: 9204 Comm: syz-executor.4 Not tainted 5.1.0-rc5+ #77 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x123/0x190 mm/kasan/generic.c:191 memcpy+0x38/0x50 mm/kasan/common.c:133 memcpy include/linux/string.h:355 [inline] __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123 __icmp_send+0x725/0x1400 net/ipv4/icmp.c:695 ipv4_link_failure+0x29f/0x550 net/ipv4/route.c:1204 dst_link_failure include/net/dst.h:427 [inline] vti6_xmit net/ipv6/ip6_vti.c:514 [inline] vti6_tnl_xmit+0x10d4/0x1c0c net/ipv6/ip6_vti.c:553 __netdev_start_xmit include/linux/netdevice.h:4414 [inline] netdev_start_xmit include/linux/netdevice.h:4423 [inline] xmit_one net/core/dev.c:3292 [inline] dev_hard_start_xmit+0x1b2/0x980 net/core/dev.c:3308 __dev_queue_xmit+0x271d/0x3060 net/core/dev.c:3878 dev_queue_xmit+0x18/0x20 net/core/dev.c:3911 neigh_direct_output+0x16/0x20 net/core/neighbour.c:1527 neigh_output include/net/neighbour.h:508 [inline] ip_finish_output2+0x949/0x1740 net/ipv4/ip_output.c:229 ip_finish_output+0x73c/0xd50 net/ipv4/ip_output.c:317 NF_HOOK_COND include/linux/netfilter.h:278 [inline] ip_output+0x21f/0x670 net/ipv4/ip_output.c:405 dst_output include/net/dst.h:444 [inline] NF_HOOK include/linux/netfilter.h:289 [inline] raw_send_hdrinc net/ipv4/raw.c:432 [inline] raw_sendmsg+0x1d2b/0x2f20 net/ipv4/raw.c:663 inet_sendmsg+0x147/0x5d0 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0xdd/0x130 net/socket.c:661 sock_write_iter+0x27c/0x3e0 net/socket.c:988 call_write_iter include/linux/fs.h:1866 [inline] new_sync_write+0x4c7/0x760 fs/read_write.c:474 __vfs_write+0xe4/0x110 fs/read_write.c:487 vfs_write+0x20c/0x580 fs/read_write.c:549 ksys_write+0x14f/0x2d0 fs/read_write.c:599 __do_sys_write fs/read_write.c:611 [inline] __se_sys_write fs/read_write.c:608 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:608 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458c29 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f293b44bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458c29 RDX: 0000000000000014 RSI: 00000000200002c0 RDI: 0000000000000003 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f293b44c6d4 R13: 00000000004c8623 R14: 00000000004ded68 R15: 00000000ffffffff The buggy address belongs to the page: page:ffffea00025aafc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x1fffc0000000000() raw: 01fffc0000000000 0000000000000000 ffffffff025a0101 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888096abef80: 00 00 00 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 f2 ffff888096abf000: f2 f2 f2 f2 00 00 00 00 00 00 00 00 00 00 00 00 >ffff888096abf080: 00 00 f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 ^ ffff888096abf100: 00 00 00 00 f1 f1 f1 f1 00 00 f3 f3 00 00 00 00 ffff888096abf180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Fixes: ed0de45a ("ipv4: recompile ip options in ipv4_link_failure") Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 3ae3d167 which is commit 310ca162 upstream. Jan Kara has reported seeing problems with this patch applied, as has Salvatore Bonaccorso, so let's drop it for now. Reported-by:
Salvatore Bonaccorso <carnil@debian.org> Reported-by:
Jan Kara <jack@suse.cz> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Xin Long authored
commit 8c63bf9a upstream. A similar issue as fixed by Patch "tipc: check bearer name with right length in tipc_nl_compat_bearer_enable" was also found by syzbot in tipc_nl_compat_link_set(). The length to check with should be 'TLV_GET_DATA_LEN(msg->req) - offsetof(struct tipc_link_config, name)'. Reported-by: syzbot+de00a87b8644a582ae79@syzkaller.appspotmail.com Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Xin Long authored
commit 6f07e5f0 upstream. Syzbot reported the following crash: BUG: KMSAN: uninit-value in memchr+0xce/0x110 lib/string.c:961 memchr+0xce/0x110 lib/string.c:961 string_is_valid net/tipc/netlink_compat.c:176 [inline] tipc_nl_compat_bearer_enable+0x2c4/0x910 net/tipc/netlink_compat.c:401 __tipc_nl_compat_doit net/tipc/netlink_compat.c:321 [inline] tipc_nl_compat_doit+0x3aa/0xaf0 net/tipc/netlink_compat.c:354 tipc_nl_compat_handle net/tipc/netlink_compat.c:1162 [inline] tipc_nl_compat_recv+0x1ae7/0x2750 net/tipc/netlink_compat.c:1265 genl_family_rcv_msg net/netlink/genetlink.c:601 [inline] genl_rcv_msg+0x185f/0x1a60 net/netlink/genetlink.c:626 netlink_rcv_skb+0x431/0x620 net/netlink/af_netlink.c:2477 genl_rcv+0x63/0x80 net/netlink/genetlink.c:637 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0xf3e/0x1020 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x127f/0x1300 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg net/socket.c:632 [inline] Uninit was created at: __alloc_skb+0x309/0xa20 net/core/skbuff.c:208 alloc_skb include/linux/skbuff.h:1012 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1182 [inline] netlink_sendmsg+0xb82/0x1300 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg net/socket.c:632 [inline] It was triggered when the bearer name size < TIPC_MAX_BEARER_NAME, it would check with a wrong len/TLV_GET_DATA_LEN(msg->req), which also includes priority and disc_domain length. This patch is to fix it by checking it with a right length: 'TLV_GET_DATA_LEN(msg->req) - offsetof(struct tipc_bearer_config, name)'. Reported-by: syzbot+8b707430713eb46e1e45@syzkaller.appspotmail.com Signed-off-by:
-
Yue Haibing authored
commit 01ca6671 upstream. Syzkaller report this: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI CPU: 0 PID: 4378 Comm: syz-executor.0 Tainted: G C 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__lock_acquire+0x95b/0x3200 kernel/locking/lockdep.c:3573 Code: 00 0f 85 28 1e 00 00 48 81 c4 08 01 00 00 5b 5d 41 5c 41 5d 41 5e 41 5f c3 4c 89 ea 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 cc 24 00 00 49 81 7d 00 e0 de 03 a6 41 bc 00 00 RSP: 0018:ffff8881e3c07a40 EFLAGS: 00010002 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000010 RSI: 0000000000000000 RDI: 0000000000000080 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8881e3c07d98 R11: ffff8881c7f21f80 R12: 0000000000000001 R13: 0000000000000080 R14: 0000000000000000 R15: 0000000000000001 FS: 00007fce2252e700(0000) GS:ffff8881f2400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fffc7eb0228 CR3: 00000001e5bea002 CR4: 00000000007606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: lock_acquire+0xff/0x2c0 kernel/locking/lockdep.c:4211 __mutex_lock_common kernel/locking/mutex.c:925 [inline] __mutex_lock+0xdf/0x1050 kernel/locking/mutex.c:1072 drain_workqueue+0x24/0x3f0 kernel/workqueue.c:2934 destroy_workqueue+0x23/0x630 kernel/workqueue.c:4319 __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x30c/0x480 kernel/module.c:961 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fce2252dc58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000140 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fce2252e6bc R13: 00000000004bcca9 R14: 00000000006f6b48 R15: 00000000ffffffff If alloc_workqueue fails, it should return -ENOMEM, otherwise may trigger this NULL pointer dereference while unloading drivers. Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: 0a38c17a ("fm10k: Remove create_workqueue") Signed-off-by:
Yue Haibing <yuehaibing@huawei.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Florian Westphal authored
commit 7caa56f0 upstream. It means userspace gave us a ruleset where there is some other data after the ebtables target but before the beginning of the next rule. Fixes: 81e675c2 ("netfilter: ebtables: add CONFIG_COMPAT support") Reported-by: syzbot+659574e7bcc7f7eb4df7@syzkaller.appspotmail.com Signed-off-by:
-
Tetsuo Handa authored
commit 7c2bd9a3 upstream. syzbot is reporting uninitialized value at rpc_sockaddr2uaddr() [1]. This is because syzbot is setting AF_INET6 to "struct sockaddr_in"->sin_family (which is embedded into user-visible "struct nfs_mount_data" structure) despite nfs23_validate_mount_data() cannot pass sizeof(struct sockaddr_in6) bytes of AF_INET6 address to rpc_sockaddr2uaddr(). Since "struct nfs_mount_data" structure is user-visible, we can't change "struct nfs_mount_data" to use "struct sockaddr_storage". Therefore, assuming that everybody is using AF_INET family when passing address via "struct nfs_mount_data"->addr, reject if its sin_family is not AF_INET. [1] https://syzkaller.appspot.com/bug?id=599993614e7cbbf66bc2656a919ab2a95fb5d75cReported-by:
syzbot <syzbot+047a11c361b872896a4f@syzkaller.appspotmail.com> Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
YueHaibing authored
commit 89189557 upstream. Syzkaller report this: sysctl could not get directory: /net//bridge -12 kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 7027 Comm: syz-executor.0 Tainted: G C 5.1.0-rc3+ #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__write_once_size include/linux/compiler.h:220 [inline] RIP: 0010:__rb_change_child include/linux/rbtree_augmented.h:144 [inline] RIP: 0010:__rb_erase_augmented include/linux/rbtree_augmented.h:186 [inline] RIP: 0010:rb_erase+0x5f4/0x19f0 lib/rbtree.c:459 Code: 00 0f 85 60 13 00 00 48 89 1a 48 83 c4 18 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 89 f2 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 75 0c 00 00 4d 85 ed 4c 89 2e 74 ce 4c 89 ea 48 RSP: 0018:ffff8881bb507778 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: ffff8881f224b5b8 RCX: ffffffff818f3f6a RDX: 000000000000000a RSI: 0000000000000050 RDI: ffff8881f224b568 RBP: 0000000000000000 R08: ffffed10376a0ef4 R09: ffffed10376a0ef4 R10: 0000000000000001 R11: ffffed10376a0ef4 R12: ffff8881f224b558 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f3e7ce13700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd60fbe9398 CR3: 00000001cb55c001 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: erase_entry fs/proc/proc_sysctl.c:178 [inline] erase_header+0xe3/0x160 fs/proc/proc_sysctl.c:207 start_unregistering fs/proc/proc_sysctl.c:331 [inline] drop_sysctl_table+0x558/0x880 fs/proc/proc_sysctl.c:1631 get_subdir fs/proc/proc_sysctl.c:1022 [inline] __register_sysctl_table+0xd65/0x1090 fs/proc/proc_sysctl.c:1335 br_netfilter_init+0x68/0x1000 [br_netfilter] do_one_initcall+0xbc/0x47d init/main.c:901 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Modules linked in: br_netfilter(+) backlight comedi(C) hid_sensor_hub max3100 ti_ads8688 udc_core fddi snd_mona leds_gpio rc_streamzap mtd pata_netcell nf_log_common rc_winfast udp_tunnel snd_usbmidi_lib snd_usb_toneport snd_usb_line6 snd_rawmidi snd_seq_device snd_hwdep videobuf2_v4l2 videobuf2_common videodev media videobuf2_vmalloc videobuf2_memops rc_gadmei_rm008z 8250_of smm665 hid_tmff hid_saitek hwmon_vid rc_ati_tv_wonder_hd_600 rc_core pata_pdc202xx_old dn_rtmsg as3722 ad714x_i2c ad714x snd_soc_cs4265 hid_kensington panel_ilitek_ili9322 drm drm_panel_orientation_quirks ipack cdc_phonet usbcore phonet hid_jabra hid extcon_arizona can_dev industrialio_triggered_buffer kfifo_buf industrialio adm1031 i2c_mux_ltc4306 i2c_mux ipmi_msghandler mlxsw_core snd_soc_cs35l34 snd_soc_core snd_pcm_dmaengine snd_pcm snd_timer ac97_bus snd_compress snd soundcore gpio_da9055 uio ecdh_generic mdio_thunder of_mdio fixed_phy libphy mdio_cavium iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel ide_pci_generic piix aes_x86_64 crypto_simd cryptd ide_core glue_helper input_leds psmouse intel_agp intel_gtt serio_raw ata_generic i2c_piix4 agpgart pata_acpi parport_pc parport floppy rtc_cmos sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: br_netfilter] Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace 68741688d5fbfe85 ]--- commit 23da9588 ("fs/proc/proc_sysctl.c: fix NULL pointer dereference in put_links") forgot to handle start_unregistering() case, while header->parent is NULL, it calls erase_header() and as seen in the above syzkaller call trace, accessing &header->parent->root will trigger a NULL pointer dereference. As that commit explained, there is also no need to call start_unregistering() if header->parent is NULL. Link: http://lkml.kernel.org/r/20190409153622.28112-1-yuehaibing@huawei.com Fixes: 23da9588 ("fs/proc/proc_sysctl.c: fix NULL pointer dereference in put_links") Fixes: 0e47c99d ("sysctl: Replace root_list with links between sysctl_table_sets") Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Alexander Shishkin authored
commit 91d3f8a6 upstream. Commit 9ed3f222 ("intel_th: Don't reference unassigned outputs") fixes a NULL dereference for all masters except the last one ("256+"), which keeps the stale pointer after the output driver had been unassigned. Fix the off-by-one. Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: 9ed3f222 ("intel_th: Don't reference unassigned outputs") Signed-off-by:
-
Linus Torvalds authored
commit baf76f0c upstream. This way, slhc_free() accepts what slhc_init() returns, whether that is an error or not. In particular, the pattern in sl_alloc_bufs() is slcomp = slhc_init(16, 16); ... slhc_free(slcomp); for the error handling path, and rather than complicate that code, just make it ok to always free what was returned by the init function. That's what the code used to do before commit 4ab42d78 ("ppp, slip: Validate VJ compression slot parameters completely") when slhc_init() just returned NULL for the error case, with no actual indication of the details of the error. Reported-by: syzbot+45474c076a4927533d2e@syzkaller.appspotmail.com Fixes: 4ab42d78 ("ppp, slip: Validate VJ compression slot parameters completely") Acked-by:
Ben Hutchings <ben@decadent.org.uk> Cc: David Miller <davem@davemloft.net> Signed-off-by:
-
Xin Long authored
commit 2ac695d1 upstream. Syzbot found a crash: BUG: KMSAN: uninit-value in tipc_nl_compat_name_table_dump+0x54f/0xcd0 net/tipc/netlink_compat.c:872 Call Trace: tipc_nl_compat_name_table_dump+0x54f/0xcd0 net/tipc/netlink_compat.c:872 __tipc_nl_compat_dumpit+0x59e/0xda0 net/tipc/netlink_compat.c:215 tipc_nl_compat_dumpit+0x63a/0x820 net/tipc/netlink_compat.c:280 tipc_nl_compat_handle net/tipc/netlink_compat.c:1226 [inline] tipc_nl_compat_recv+0x1b5f/0x2750 net/tipc/netlink_compat.c:1265 genl_family_rcv_msg net/netlink/genetlink.c:601 [inline] genl_rcv_msg+0x185f/0x1a60 net/netlink/genetlink.c:626 netlink_rcv_skb+0x431/0x620 net/netlink/af_netlink.c:2477 genl_rcv+0x63/0x80 net/netlink/genetlink.c:637 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0xf3e/0x1020 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x127f/0x1300 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg net/socket.c:632 [inline] Uninit was created at: __alloc_skb+0x309/0xa20 net/core/skbuff.c:208 alloc_skb include/linux/skbuff.h:1012 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1182 [inline] netlink_sendmsg+0xb82/0x1300 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg net/socket.c:632 [inline] It was supposed to be fixed on commit 974cb0e3 ("tipc: fix uninit-value in tipc_nl_compat_name_table_dump") by checking TLV_GET_DATA_LEN(msg->req) in cmd->header()/tipc_nl_compat_name_table_dump_header(), which is called ahead of tipc_nl_compat_name_table_dump(). However, tipc_nl_compat_dumpit() doesn't handle the error returned from cmd header function. It means even when the check added in that fix fails, it won't stop calling tipc_nl_compat_name_table_dump(), and the issue will be triggered again. So this patch is to add the process for the err returned from cmd header function in tipc_nl_compat_dumpit(). Reported-by: syzbot+3ce8520484b0d4e260a5@syzkaller.appspotmail.com Signed-off-by:
-
Adalbert Lazăr authored
commit 4c404ce2 upstream. Previous to commit 22b5c0b6 ("vsock/virtio: fix kernel panic after device hot-unplug"), vsock_core_init() was called from virtio_vsock_probe(). Now, virtio_transport_reset_no_sock() can be called before vsock_core_init() has the chance to run. [Wed Feb 27 14:17:09 2019] BUG: unable to handle kernel NULL pointer dereference at 0000000000000110 [Wed Feb 27 14:17:09 2019] #PF error: [normal kernel read fault] [Wed Feb 27 14:17:09 2019] PGD 0 P4D 0 [Wed Feb 27 14:17:09 2019] Oops: 0000 [#1] SMP PTI [Wed Feb 27 14:17:09 2019] CPU: 3 PID: 59 Comm: kworker/3:1 Not tainted 5.0.0-rc7-390-generic-hvi #390 [Wed Feb 27 14:17:09 2019] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [Wed Feb 27 14:17:09 2019] Workqueue: virtio_vsock virtio_transport_rx_work [vmw_vsock_virtio_transport] [Wed Feb 27 14:17:09 2019] RIP: 0010:virtio_transport_reset_no_sock+0x8c/0xc0 [vmw_vsock_virtio_transport_common] [Wed Feb 27 14:17:09 2019] Code: 35 8b 4f 14 48 8b 57 08 31 f6 44 8b 4f 10 44 8b 07 48 8d 7d c8 e8 84 f8 ff ff 48 85 c0 48 89 c3 74 2a e8 f7 31 03 00 48 89 df <48> 8b 80 10 01 00 00 e8 68 fb 69 ed 48 8b 75 f0 65 48 33 34 25 28 [Wed Feb 27 14:17:09 2019] RSP: 0018:ffffb42701ab7d40 EFLAGS: 00010282 [Wed Feb 27 14:17:09 2019] RAX: 0000000000000000 RBX: ffff9d79637ee080 RCX: 0000000000000003 [Wed Feb 27 14:17:09 2019] RDX: 0000000000000001 RSI: 0000000000000002 RDI: ffff9d79637ee080 [Wed Feb 27 14:17:09 2019] RBP: ffffb42701ab7d78 R08: ffff9d796fae70e0 R09: ffff9d796f403500 [Wed Feb 27 14:17:09 2019] R10: ffffb42701ab7d90 R11: 0000000000000000 R12: ffff9d7969d09240 [Wed Feb 27 14:17:09 2019] R13: ffff9d79624e6840 R14: ffff9d7969d09318 R15: ffff9d796d48ff80 [Wed Feb 27 14:17:09 2019] FS: 0000000000000000(0000) GS:ffff9d796fac0000(0000) knlGS:0000000000000000 [Wed Feb 27 14:17:09 2019] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [Wed Feb 27 14:17:09 2019] CR2: 0000000000000110 CR3: 0000000427f22000 CR4: 00000000000006e0 [Wed Feb 27 14:17:09 2019] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [Wed Feb 27 14:17:09 2019] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [Wed Feb 27 14:17:09 2019] Call Trace: [Wed Feb 27 14:17:09 2019] virtio_transport_recv_pkt+0x63/0x820 [vmw_vsock_virtio_transport_common] [Wed Feb 27 14:17:09 2019] ? kfree+0x17e/0x190 [Wed Feb 27 14:17:09 2019] ? detach_buf_split+0x145/0x160 [Wed Feb 27 14:17:09 2019] ? __switch_to_asm+0x40/0x70 [Wed Feb 27 14:17:09 2019] virtio_transport_rx_work+0xa0/0x106 [vmw_vsock_virtio_transport] [Wed Feb 27 14:17:09 2019] NET: Registered protocol family 40 [Wed Feb 27 14:17:09 2019] process_one_work+0x167/0x410 [Wed Feb 27 14:17:09 2019] worker_thread+0x4d/0x460 [Wed Feb 27 14:17:09 2019] kthread+0x105/0x140 [Wed Feb 27 14:17:09 2019] ? rescuer_thread+0x360/0x360 [Wed Feb 27 14:17:09 2019] ? kthread_destroy_worker+0x50/0x50 [Wed Feb 27 14:17:09 2019] ret_from_fork+0x35/0x40 [Wed Feb 27 14:17:09 2019] Modules linked in: vmw_vsock_virtio_transport vmw_vsock_virtio_transport_common input_leds vsock serio_raw i2c_piix4 mac_hid qemu_fw_cfg autofs4 cirrus ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops virtio_net psmouse drm net_failover pata_acpi virtio_blk failover floppy Fixes: 22b5c0b6 ("vsock/virtio: fix kernel panic after device hot-unplug") Reported-by:
Alexandru Herghelegiu <aherghelegiu@bitdefender.com> Signed-off-by:
Adalbert Lazăr <alazar@bitdefender.com> Co-developed-by:
Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by:
Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:
-
Kai-Heng Feng authored
commit d7a6c0ce upstream. USB Bluetooth controller QCA ROME (0cf3:e007) sometimes stops working after S3: [ 165.110742] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [ 168.432065] Bluetooth: hci0: Failed to send body at 4 of 1953 (-110) After some experiments, I found that disabling LPM can workaround the issue. On some platforms, the USB power is cut during S3, so the driver uses reset-resume to resume the device. During port resume, LPM gets enabled twice, by usb_reset_and_verify_device() and usb_port_resume(). Consolidate all checks into new LPM helpers to make sure LPM only gets enabled once. Fixes: de68bab4 ("usb: Don't enable USB 2.0 Link PM by default.”) Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: stable <stable@vger.kernel.org> # after much soaking Signed-off-by:
-
Kai-Heng Feng authored
commit 7529b257 upstream. Use new helpers to make LPM enabling/disabling more clear. This is a preparation to subsequent patch. Signed-off-by:
-
Maarten Lankhorst authored
commit 462ce5d9 upstream. A pointer to crtc was missing, resulting in the following build error: drivers/gpu/drm/vc4/vc4_crtc.c:1045:44: sparse: sparse: incorrect type in argument 1 (different base types) drivers/gpu/drm/vc4/vc4_crtc.c:1045:44: sparse: expected struct drm_crtc *crtc drivers/gpu/drm/vc4/vc4_crtc.c:1045:44: sparse: got struct drm_crtc_state *state drivers/gpu/drm/vc4/vc4_crtc.c:1045:39: sparse: sparse: not enough arguments for function vc4_crtc_destroy_state Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reported-by:
kbuild test robot <lkp@intel.com> Cc: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/2b6ed5e6-81b0-4276-8860-870b54ca3262@linux.intel.com Fixes: d0810679 ("drm/vc4: Fix memory leak during gpu reset.") Cc: <stable@vger.kernel.org> # v4.6+ Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Maarten Lankhorst authored
commit d0810679 upstream. __drm_atomic_helper_crtc_destroy_state does not free memory, it only cleans it up. Fix this by calling the functions own destroy function. Fixes: 6d6e5003 ("drm/vc4: Allocate the right amount of space for boot-time CRTC state.") Cc: Eric Anholt <eric@anholt.net> Cc: <stable@vger.kernel.org> # v4.6+ Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
-
Ard Biesheuvel authored
commit e17b1af9 upstream. The EFI stub is entered with the caches and MMU enabled by the firmware, and once the stub is ready to hand over to the decompressor, we clean and disable the caches. The cache clean routines use CP15 barrier instructions, which can be disabled via SCTLR. Normally, when using the provided cache handling routines to enable the caches and MMU, this bit is enabled as well. However, but since we entered the stub with the caches already enabled, this routine is not executed before we call the cache clean routines, resulting in undefined instruction exceptions if the firmware never enabled this bit. So set the bit explicitly in the EFI entry code, but do so in a way that guarantees that the resulting code can still run on v6 cores as well (which are guaranteed to have CP15 barriers enabled) Cc: <stable@vger.kernel.org> # v4.9+ Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Dirk Behme authored
commit 907bd68a upstream. Having a cyclic DMA, a residue 0 is not an indication of a completed DMA. In case of cyclic DMA make sure that dma_set_residue() is called and with this a residue of 0 is forwarded correctly to the caller. Fixes: 3544d287 ("dmaengine: rcar-dmac: use result of updated get_residue in tx_status") Signed-off-by:
Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by:
Achim Dahlhoff <Achim.Dahlhoff@de.bosch.com> Signed-off-by:
Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by:
Yao Lihua <ylhuajnu@outlook.com> Reviewed-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: <stable@vger.kernel.org> # v4.8+ Signed-off-by:
-
Lucas Stach authored
commit 3a349763 upstream. Currently any changed config register values don't take effect, as the function to write them back is called with the wrong register offset. Fixes: ff8f8370 (Input: synaptics-rmi4 - add support for 2D sensors and F11) Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Reviewed-by:
Philipp Zabel <p.zabel@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
NeilBrown authored
commit d58431ea upstream. A recent commit added a call to cache_fresh_locked() when an expired item was found. The call sets the CACHE_VALID flag, so it is important that the item actually is valid. There are two ways it could be valid: 1/ If ->update has been called to fill in relevant content 2/ if CACHE_NEGATIVE is set, to say that content doesn't exist. An expired item that is waiting for an update will be neither. Setting CACHE_VALID will mean that a subsequent call to cache_put() will be likely to dereference uninitialised pointers. So we must make sure the item is valid, and we already have code to do that in try_to_negate_entry(). This takes the hash lock and so cannot be used directly, so take out the two lines that we need and use them. Now cache_fresh_locked() is certain to be called only on a valid item. Cc: stable@kernel.org # 2.6.35 Fixes: 4ecd55ea ("sunrpc: fix cache_head leak due to queued request") Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Trond Myklebust authored
commit e6abc8ca upstream. If there are multiple callbacks queued, waiting for the callback slot when the callback gets shut down, then they all currently end up acting as if they hold the slot, and call nfsd4_cb_sequence_done() resulting in interesting side-effects. In addition, the 'retry_nowait' path in nfsd4_cb_sequence_done() causes a loop back to nfsd4_cb_prepare() without first freeing the slot, which causes a deadlock when nfsd41_cb_get_slot() gets called a second time. This patch therefore adds a boolean to track whether or not the callback did pick up the slot, so that it can do the right thing in these 2 cases. Cc: stable@vger.kernel.org Signed-off-by:
-
Yan, Zheng authored
commit 37659182 upstream. We missed two places that i_wrbuffer_ref_head, i_wr_ref, i_dirty_caps and i_flushing_caps may change. When they are all zeros, we should free i_head_snapc. Cc: stable@vger.kernel.org Link: https://tracker.ceph.com/issues/38224Reported-and-tested-by:
Luis Henriques <lhenriques@suse.com> Signed-off-by:
"Yan, Zheng" <zyan@redhat.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Jeff Layton authored
commit 76a495d6 upstream. Take the d_lock here to ensure that d_name doesn't change. Cc: stable@vger.kernel.org Signed-off-by:
Jeff Layton <jlayton@kernel.org> Reviewed-by:
-
