- 03 Dec, 2015 30 commits
-
-
Dmitry Lifshitz authored
Startek-kd050c 800x480 LCD panel timings are described in compulab-sb-som.dtsi. Add appropriate DT endpoints to connect DPI output and LCD. Signed-off-by:
Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by:
Igor Grinberg <grinberg@compulab.co.il> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Dmitry Lifshitz authored
Add PCA9555 GPIO expander support (over I2C5 bus). Signed-off-by:
Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by:
Igor Grinberg <grinberg@compulab.co.il> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Dmitry Lifshitz authored
On-board EEPROM chip is used for storing a board production info. Add carrier board EEPROM support (over I2C5 bus). Signed-off-by:
Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Dmitry Lifshitz authored
usb1_drvvbus pin is used to Drive-VBUS enable to external charge pump/power switch. Add a pinmux for that pin. Signed-off-by:
Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by:
Igor Grinberg <grinberg@compulab.co.il> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Dmitry Lifshitz authored
Add MMC1 support, used for SD/MMC card. Signed-off-by:
Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by:
Igor Grinberg <grinberg@compulab.co.il> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Dmitry Lifshitz authored
SBC-AM57x is a single board computer designed for industrial and embedded applications. It is based on the Texas Instruments Sitara AM57x system-on-chip family. SBC-AM57x is implemented with the CL-SOM-AM57x computer-on-module providing most of the functions, and SB-SOM-AM57x carrier board providing additional peripheral functions and connectors. https://www.compulab.co.il/products/sbcs/sbc-am57x-ti-am5728-am5718-single-board-computer/ https://www.compulab.co.il/products/computer-on-modules/cl-som-am57x-ti-am5728-am5718-system-on-module/ Add basic board support, including UART3, used as a serial console. Signed-off-by:
Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by:
Igor Grinberg <grinberg@compulab.co.il> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Dmitry Lifshitz authored
Add analog audio DT nodes: 1. simple-audio-card node 2. wm8731 codec node 3. MCASP3 pinmux Signed-off-by:
Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by:
Igor Grinberg <grinberg@compulab.co.il> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Dmitry Lifshitz authored
Add ADS7846 touchscreen support. Signed-off-by:
Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by:
Igor Grinberg <grinberg@compulab.co.il> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Dmitry Lifshitz authored
Add USB support. Signed-off-by:
Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by:
Igor Grinberg <grinberg@compulab.co.il> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Dmitry Lifshitz authored
Add dual EMAC support. Signed-off-by:
Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by:
Igor Grinberg <grinberg@compulab.co.il> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Dmitry Lifshitz authored
On-board spi-flash chip is used as a main boot device. Add spi-flash chip support (over QSPI bus). Signed-off-by:
Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by:
Igor Grinberg <grinberg@compulab.co.il> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Dmitry Lifshitz authored
CM-SOM-AM57X has two options of main storage devices - eMMC or NAND. Add eMMC chip support (over MMC2 bus). Signed-off-by:
Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by:
Igor Grinberg <grinberg@compulab.co.il> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Dmitry Lifshitz authored
On-board EEPROM chip is used for storing a board production info. Add module EEPROM support (over I2C4 bus). Signed-off-by:
Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Dmitry Lifshitz authored
Enable I2C3 bus and add appropriate pinmux. Signed-off-by:
Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by:
Igor Grinberg <grinberg@compulab.co.il> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Dmitry Lifshitz authored
Add EM3027 RTC chip support (over I2C4 bus). Signed-off-by:
Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by:
Igor Grinberg <grinberg@compulab.co.il> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Dmitry Lifshitz authored
Add support for CompuLab CM-SOM-AM57X board. CL-SOM-AM57x is a miniature System-on-Module (SoM) based on TI Sitara AM57x ARM Cortex-A15 System-on-Chip family. https://www.compulab.co.il/products/computer-on-modules/cl-som-am57x-ti-am5728-am5718-system-on-module/ Add basic DT support for standalone module (without a carrier board): * Memory configuration * Heartbeat led * I2C1 and I2C4 * PMIC * SATA Signed-off-by:
Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by:
Igor Grinberg <grinberg@compulab.co.il> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Nikita Kiryanov authored
Add the necessary dss configuration to drive the startek lcd on CompuLab sbc-t43 single board computer. Signed-off-by:
Nikita Kiryanov <nikita@compulab.co.il> Cc: Tony Lindgren <tony@atomide.com> Cc: Benoit Cousson <bcousson@baylibre.com> Cc: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Nikita Kiryanov authored
On SBC-T43 the mmc1 interface is connected to an SD-Card slot. Add the necessary muxing and configuration to the device tree. Signed-off-by:
Nikita Kiryanov <nikita@compulab.co.il> Cc: Tony Lindgren <tony@atomide.com> Cc: Benoit Cousson <bcousson@baylibre.com> Cc: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Nikita Kiryanov authored
CompuLab SB-SOM baseboard is a carrier board for multiple arm-based SoMs. It currently supports (with minor adjustments to assembly) CM-T43, CM-T54, and CM-QS600 modules. It is a building block in the SBC-T43 single board computer, which consists of cm-t43 on top of sb-som-t43. Signed-off-by:
Nikita Kiryanov <nikita@compulab.co.il> Cc: Tony Lindgren <tony@atomide.com> Cc: Benoit Cousson <bcousson@baylibre.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Nikita Kiryanov authored
SB-SOM baseboard comes with an on-board EEPROM. On SBC-T43 this EEPROM resides on the i2c1 bus. Add it to the device tree. Signed-off-by:
Nikita Kiryanov <nikita@compulab.co.il> Cc: Tony Lindgren <tony@atomide.com> Cc: Benoit Cousson <bcousson@baylibre.com> Cc: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Nikita Kiryanov authored
SB-SOM comes with a PCA9555 GPIO extender. On SBC-T43 this resides on the i2c1 bus. Add it to the device tree. Signed-off-by:
Nikita Kiryanov <nikita@compulab.co.il> Cc: Tony Lindgren <tony@atomide.com> Cc: Benoit Cousson <bcousson@baylibre.com> Cc: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Nikita Kiryanov authored
AM437x has an internal touchscreen controller. Add support for it on cm-t43. Signed-off-by:
Nikita Kiryanov <nikita@compulab.co.il> Cc: Tony Lindgren <tony@atomide.com> Cc: Benoit Cousson <bcousson@baylibre.com> Cc: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Nikita Kiryanov authored
One of the CompuLab cm-t43 configurations comes with on-board eMMC as primary storage, residing on the mmc2 interface. Add it to the device tree. Signed-off-by:
Nikita Kiryanov <nikita@compulab.co.il> Cc: Tony Lindgren <tony@atomide.com> Cc: Benoit Cousson <bcousson@baylibre.com> Cc: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Nikita Kiryanov authored
Add USB support for CompuLab sbc-t43 single board computer, defaulting to host mode. Signed-off-by:
Nikita Kiryanov <nikita@compulab.co.il> Cc: Tony Lindgren <tony@atomide.com> Cc: Benoit Cousson <bcousson@baylibre.com> Cc: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Nikita Kiryanov authored
CM-T43 comes with 2 ethernet ports connected to the cpsw subsystem, which has 2 modes of operation: switch mode and dual emac mode. Add the relevant muxing and set it up to work in dual emac mode by default. Signed-off-by:
Nikita Kiryanov <nikita@compulab.co.il> Acked-by:
Mugunthan V N <mugunthanvnm@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Benoit Cousson <bcousson@baylibre.com> Cc: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Nikita Kiryanov authored
One of the CompuLab cm-t43 configurations comes with on-board NAND flash as primary storage. It is partitioned into kernel, dtb, and rootfs partitions. Add it to the device tree. Signed-off-by:
Nikita Kiryanov <nikita@compulab.co.il> Cc: Tony Lindgren <tony@atomide.com> Cc: Benoit Cousson <bcousson@baylibre.com> Cc: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Nikita Kiryanov authored
CM-T43 has an on-board 2MB SPI-flash which stores U-Boot and the U-Boot environment. Add it to the device tree. Signed-off-by:
Nikita Kiryanov <nikita@compulab.co.il> Cc: Tony Lindgren <tony@atomide.com> Cc: Benoit Cousson <bcousson@baylibre.com> Cc: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Nikita Kiryanov authored
Add PMIC support for CompuLab cm-t43 module. For now we keep all regulators enabled until this could be refined with power management support. Signed-off-by:
Nikita Kiryanov <nikita@compulab.co.il> Cc: Tony Lindgren <tony@atomide.com> Cc: Benoit Cousson <bcousson@baylibre.com> Cc: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Nikita Kiryanov authored
CM-T43 has an on-board EEPROM on i2c bus 0. Add it to the device tree. Signed-off-by:
Nikita Kiryanov <nikita@compulab.co.il> Cc: Tony Lindgren <tony@atomide.com> Cc: Benoit Cousson <bcousson@baylibre.com> Cc: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Nikita Kiryanov authored
Add basic support for SBC-T43: a CM-T43 based single board computer. CM-T43 is an AM437x based System-on-Module designed to serve as a building block in embedded applications. SBC-T43 is composed of CM-T43 module on top of the SB-SOM-T43 baseboard. Basic support includes UART, GPIO, and I2C. Signed-off-by:
Nikita Kiryanov <nikita@compulab.co.il> Acked-by:
Rob Herring <robh@kernel.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Benoit Cousson <bcousson@baylibre.com> Cc: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
- 01 Dec, 2015 2 commits
-
-
Vignesh R authored
Uart1 rxd is wakeup capable on DRA72 EVM. Hence, mark rxd line as wakeup capable. This is similar to commit 66b04369 ("ARM: dts: dra7-evm: Mark uart1 rxd as wakeup capable") for DRA74 EVM. Signed-off-by:
Vignesh R <vigneshr@ti.com> Acked-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Mugunthan V N authored
Set the alias for qspi to spi0 Signed-off-by:
Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by:
Tom Rini <trini@konsulko.com> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
- 30 Nov, 2015 8 commits
-
-
Mugunthan V N authored
Set the alias for qspi to spi0 Signed-off-by:
Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by:
Tom Rini <trini@konsulko.com> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Heiko Schocher authored
add support for the am335x based shc board. UART: 0-2 and 4 DRAM: 512 MiB MMC: OMAP SD/MMC: 0 @ 26 MHz OMAP SD/MMC: 1 @ 26 MHz I2C: at24 eeprom, pcf8563 USB: USB1 (host) Signed-off-by:
Heiko Schocher <hs@denx.de> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Franklin S Cooper Jr authored
Add device tree entry for the error location module. Signed-off-by:
Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Heiko Schocher authored
remove tps65217.dtsi and adapt all boards, which used it. Signed-off-by:
Heiko Schocher <hs@denx.de> Tested-by:
Keerthy <j-keerthy@ti.com> Acked-by:
Mark Brown <broonie@kernel.org> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Ilya Ledvich authored
Add pinmux configuration for ECAP0 pin. Add node for PWM backlight device. Use PWM output from ecap0 as backlight source. Signed-off-by:
Ilya Ledvich <ilya@compulab.co.il> Signed-off-by:
Uri Mashiach <uri.mashiach@compulab.co.il> Acked-by:
Igor Grinberg <grinberg@compulab.co.il> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Ilya Ledvich authored
Add pinmux configurations for RGMII1 based CPSW Ethernet pins and MDIO pins: - default configuration required for module in active state, - sleep configuration required for module in inactive state. Add mac node with single slave device. Add nodes for davinci_mdio and cpsw_emac0. Signed-off-by:
Ilya Ledvich <ilya@compulab.co.il> Signed-off-by:
Uri Mashiach <uri.mashiach@compulab.co.il> Acked-by:
Igor Grinberg <grinberg@compulab.co.il> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Ilya Ledvich authored
Add pinmux configuration for MMC0 pins. Add fixed regulator 'vmmc_fixed'. Enable MMC0 in 4-bit mode. Signed-off-by:
Ilya Ledvich <ilya@compulab.co.il> Signed-off-by:
Uri Mashiach <uri.mashiach@compulab.co.il> Acked-by:
Igor Grinberg <grinberg@compulab.co.il> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Ilya Ledvich authored
Add pinmux configuration for NAND specific GPMC pins. Add description for GPMC controller. Add child node for NAND flash including CM-T335 specific partition table to GPMC node. Enable error-location module (ELM). Acked-by:
Igor Grinberg <grinberg@compulab.co.il> Signed-off-by:
Ilya Ledvich <ilya@compulab.co.il> Signed-off-by:
Uri Mashiach <uri.mashiach@compulab.co.il> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-