- 04 Jun, 2019 37 commits
-
-
Willem de Bruijn authored
[ Upstream commit 100f6d8e ] TCP zerocopy takes a uarg reference for every skb, plus one for the tcp_sendmsg_locked datapath temporarily, to avoid reaching refcnt zero as it builds, sends and frees skbs inside its inner loop. UDP and RAW zerocopy do not send inside the inner loop so do not need the extra sock_zerocopy_get + sock_zerocopy_put pair. Commit 52900d22288ed ("udp: elide zerocopy operation in hot path") introduced extra_uref to pass the initial reference taken in sock_zerocopy_alloc to the first generated skb. But, sock_zerocopy_realloc takes this extra reference at the start of every call. With MSG_MORE, no new skb may be generated to attach the extra_uref to, so refcnt is incorrectly 2 with only one skb. Do not take the extra ref if uarg && !tcp, which implies MSG_MORE. Update extra_uref accordingly. This conditional assignment triggers a false positive may be used uninitialized warning, so have to initialize extra_uref at define. Changes v1->v2: fix typo in Fixes SHA1 Fixes: 52900d22 ("udp: elide zerocopy operation in hot path") Reported-by:
syzbot <syzkaller@googlegroups.com> Diagnosed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vishal Kulkarni authored
[ Upstream commit ab0610ef ] This reverts commit 2391b003 which has introduced regression. Now SGE's BAR2 Doorbell/GTS Page Size is interpreted correctly in the firmware itself by using actual host page size. Hence previous commit needs to be reverted. Signed-off-by:
Vishal Kulkarni <vishal@chelsio.com> Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit c3f4a6c3 ] On device surprise removal path (the notifier) we can't bail just because the features are disabled. They may have been enabled during the lifetime of the device. This bug leads to leaking netdev references and use-after-frees if there are active connections while device features are cleared. Fixes: e8f69799 ("net/tls: Add generic NIC offload infrastructure") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit 3686637e ] TLS offload drivers shouldn't (and currently don't) block the TLS offload feature changes based on whether there are active offloaded connections or not. This seems to be a good idea, because we want the admin to be able to disable the TLS offload at any time, and there is no clean way of disabling it for active connections (TX side is quite problematic). So if features are cleared existing connections will stay offloaded until they close, and new connections will not attempt offload to a given device. However, the offload state removal handling is currently broken if feature flags get cleared while there are active TLS offloads. RX side will completely bail from cleanup, even on normal remove path, leaving device state dangling, potentially causing issues when the 5-tuple is reused. It will also fail to release the netdev reference. Remove the RX-side warning message, in next release cycle it should be printed when features are disabled, rather than when connection dies, but for that we need a more efficient method of finding connection of a given netdev (a'la BPF offload code). Fixes: 4799ac81 ("tls: Add rx inline crypto offload") Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit 043556d0 ] Add a test which sends 15 bytes of data, and then tries to read 10 byes twice. Previously the second read would sleep indifinitely, since the record was already decrypted and there is only 5 bytes left, not full 10. Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit 04b25a54 ] When tls_sw_recvmsg() partially copies a record it pops that record from ctx->recv_pkt and places it on rx_list. Next iteration of tls_sw_recvmsg() reads from rx_list via process_rx_list() before it enters the decryption loop. If there is no more records to be read tls_wait_data() will put the process on the wait queue and got to sleep. This is incorrect, because some data was already copied in process_rx_list(). In case of RPC connections process may never get woken up, because peer also simply blocks in read(). I think this may also fix a similar issue when BPF is at play, because after __tcp_bpf_recvmsg() returns some data we subtract it from len and use continue to restart the loop, but len could have just reached 0, so again we'd sleep unnecessarily. That's added by: commit d3b18ad3 ("tls: add bpf support to sk_msg handling") Fixes: 692d7b5d ("tls: Fix recvmsg() to be able to peek across multiple records") Reported-by:
David Beckett <david.beckett@netronome.com> Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit 7718a855 ] Set SO_RCVLOWAT and test it gets respected when gathering data from multiple records. Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit 46a16959 ] If some of the data came from the previous record, i.e. from the rx_list it had already been decrypted, so it's not counted towards the "decrypted" variable, but the "copied" variable. Take that into account when checking lowat. When calculating lowat target we need to pass the original len. E.g. if lowat is at 80, len is 100 and we had 30 bytes on rx_list target would currently be incorrectly calculated as 70, even though we only need 50 more bytes to make up the 80. Fixes: 692d7b5d ("tls: Fix recvmsg() to be able to peek across multiple records") Signed-off-by:
-
Michael Chan authored
[ Upstream commit d629522e ] Skip RDMA context memory allocations, reduce to 1 ring, and disable TPA when running in the kdump kernel. Without this patch, the driver fails to initialize with memory allocation errors when running in a typical kdump kernel. Fixes: cf6daed0 ("bnxt_en: Increase context memory allocations on 57500 chips for RDMA.") Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Michael Chan authored
[ Upstream commit 1b3f0b75 ] When making configuration changes, the driver calls bnxt_close_nic() and then bnxt_open_nic() for the changes to take effect. A parameter irq_re_init is passed to the call sequence to indicate if IRQ should be re-initialized. This irq_re_init parameter needs to be included in the bnxt_reserve_rings() call. bnxt_reserve_rings() can only call pci_disable_msix() if the irq_re_init parameter is true, otherwise it may hit BUG() because some IRQs may not have been freed yet. Fixes: 41e8d798 ("bnxt_en: Modify the ring reservation functions for 57500 series chips.") Signed-off-by:
-
Michael Chan authored
[ Upstream commit 296d5b54 ] For every RX packet, the driver replenishes all buffers used for that packet and puts them back into the RX ring and RX aggregation ring. In one code path where the RX packet has one RX buffer and one or more aggregation buffers, we missed recycling the aggregation buffer(s) if we are unable to allocate a new SKB buffer. This leads to the aggregation ring slowly running out of buffers over time. Fix it by properly recycling the aggregation buffers. Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.") Reported-by:
Rakesh Hemnani <rhemnani@fb.com> Signed-off-by:
-
Weifeng Voon authored
stmmac_init_chan() needs to be called before stmmac_init_rx_chan() and stmmac_init_tx_chan(). This is because if PBLx8 is to be used, "DMA_CH(#i)_Control.PBLx8" needs to be set before programming "DMA_CH(#i)_TX_Control.TxPBL" and "DMA_CH(#i)_RX_Control.RxPBL". Fixes: 47f2a9ce ("net: stmmac: dma channel init prepared for multiple queues") Reviewed-by:
Zhang, Baoli <baoli.zhang@intel.com> Signed-off-by:
Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by:
Weifeng Voon <weifeng.voon@intel.com> Signed-off-by:
-
Tan, Tee Min authored
Currently ethtool was not able to get/set the flow control due to a missing "!". It will always return -EOPNOTSUPP even the device is flow control supported. This patch fixes the condition check for ethtool flow control get/set function for ETHTOOL_LINK_MODE_Asym_Pause_BIT. Fixes: 3c1bcc86 (“net: ethernet: Convert phydev advertize and supported from u32 to link mode”) Signed-off-by:
Tan, Tee Min <tee.min.tan@intel.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Saeed Mahameed authored
[ Upstream commit c0194e2d ] When CQE compression is enabled (Multi-host systems), compressed CQEs might arrive to the driver rx, compressed CQEs don't have a valid hash offload and the driver already reports a hash value of 0 and invalid hash type on the skb for compressed CQEs, but this is not good enough. On a congested PCIe, where CQE compression will kick in aggressively, gro will deliver lots of out of order packets due to the invalid hash and this might cause a serious performance drop. The only valid solution, is to disable rxhash offload at all when CQE compression is favorable (Multi-host systems). Fixes: 7219ab34 ("net/mlx5e: CQE compression") Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Parav Pandit authored
[ Upstream commit 25fa506b ] root ns is yet another fs core node which is freed using kfree() by tree_put_node(). Rest of the other fs core objects are also allocated using kmalloc variants. However, root ns memory is allocated using kvzalloc(). Hence allocate root ns memory using kzalloc(). Fixes: 25302363 ("net/mlx5_core: Flow steering tree initialization") Signed-off-by:
Parav Pandit <parav@mellanox.com> Reviewed-by:
Daniel Jurgens <danielj@mellanox.com> Reviewed-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
-
Chris Packham authored
TLV_SET is called with a data pointer and a len parameter that tells us how many bytes are pointed to by data. When invoking memcpy() we need to careful to only copy len bytes. Previously we would copy TLV_LENGTH(len) bytes which would copy an extra 4 bytes past the end of the data pointer which newer GCC versions complain about. In file included from test.c:17: In function 'TLV_SET', inlined from 'test' at test.c:186:5: /usr/include/linux/tipc_config.h:317:3: warning: 'memcpy' forming offset [33, 36] is out of the bounds [0, 32] of object 'bearer_name' with type 'char[32]' [-Warray-bounds] memcpy(TLV_DATA(tlv_ptr), data, tlv_len); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ test.c: In function 'test': test.c::161:10: note: 'bearer_name' declared here char bearer_name[TIPC_MAX_BEARER_NAME]; ^~~~~~~~~~~ We still want to ensure any padding bytes at the end are initialised, do this with a explicit memset() rather than copy bytes past the end of data. Apply the same logic to TCM_SET. Signed-off-by:Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by:
-
Parav Pandit authored
[ Upstream commit 9414277a ] In below code flow, for ingress acl table root ns memory leads to double free. mlx5_init_fs init_ingress_acls_root_ns() init_ingress_acl_root_ns kfree(steering->esw_ingress_root_ns); /* steering->esw_ingress_root_ns is not marked NULL */ mlx5_cleanup_fs cleanup_ingress_acls_root_ns steering->esw_ingress_root_ns non NULL check passes. kfree(steering->esw_ingress_root_ns); /* double free */ Similar issue exist for other tables. Hence zero out the pointers to not process the table again. Fixes: 9b93ab98 ("net/mlx5: Separate ingress/egress namespaces for each vport") Fixes: 40c3eebb49e51 ("net/mlx5: Add support in RDMA RX steering") Signed-off-by:
-
Kloetzke Jan authored
[ Upstream commit ad70411a ] When disconnecting cdc_ncm the kernel sporadically crashes shortly after the disconnect: [ 57.868812] Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... [ 58.006653] PC is at 0x0 [ 58.009202] LR is at call_timer_fn+0xec/0x1b4 [ 58.013567] pc : [<0000000000000000>] lr : [<ffffff80080f5130>] pstate: 00000145 [ 58.020976] sp : ffffff8008003da0 [ 58.024295] x29: ffffff8008003da0 x28: 0000000000000001 [ 58.029618] x27: 000000000000000a x26: 0000000000000100 [ 58.034941] x25: 0000000000000000 x24: ffffff8008003e68 [ 58.040263] x23: 0000000000000000 x22: 0000000000000000 [ 58.045587] x21: 0000000000000000 x20: ffffffc68fac1808 [ 58.050910] x19: 0000000000000100 x18: 0000000000000000 [ 58.056232] x17: 0000007f885aff8c x16: 0000007f883a9f10 [ 58.061556] x15: 0000000000000001 x14: 000000000000006e [ 58.066878] x13: 0000000000000000 x12: 00000000000000ba [ 58.072201] x11: ffffffc69ff1db30 x10: 0000000000000020 [ 58.077524] x9 : 8000100008001000 x8 : 0000000000000001 [ 58.082847] x7 : 0000000000000800 x6 : ffffff8008003e70 [ 58.088169] x5 : ffffffc69ff17a28 x4 : 00000000ffff138b [ 58.093492] x3 : 0000000000000000 x2 : 0000000000000000 [ 58.098814] x1 : 0000000000000000 x0 : 0000000000000000 ... [ 58.205800] [< (null)>] (null) [ 58.210521] [<ffffff80080f5298>] expire_timers+0xa0/0x14c [ 58.215937] [<ffffff80080f542c>] run_timer_softirq+0xe8/0x128 [ 58.221702] [<ffffff8008081120>] __do_softirq+0x298/0x348 [ 58.227118] [<ffffff80080a6304>] irq_exit+0x74/0xbc [ 58.232009] [<ffffff80080e17dc>] __handle_domain_irq+0x78/0xac [ 58.237857] [<ffffff8008080cf4>] gic_handle_irq+0x80/0xac ... The crash happens roughly 125..130ms after the disconnect. This correlates with the 'delay' timer that is started on certain USB tx/rx errors in the URB completion handler. The problem is a race of usbnet_stop() with usbnet_start_xmit(). In usbnet_stop() we call usbnet_terminate_urbs() to cancel all URBs in flight. This only makes sense if no new URBs are submitted concurrently, though. But the usbnet_start_xmit() can run at the same time on another CPU which almost unconditionally submits an URB. The error callback of the new URB will then schedule the timer after it was already stopped. The fix adds a check if the tx queue is stopped after the tx list lock has been taken. This should reliably prevent the submission of new URBs while usbnet_terminate_urbs() does its job. The same thing is done on the rx side even though it might be safe due to other flags that are checked there. Signed-off-by:
Jan Klötzke <Jan.Kloetzke@preh.de> Signed-off-by:
-
Heiner Kallweit authored
[ Upstream commit 59715171 ] (At least) RTL8168e forgets its MAC address in PCI D3. To fix this set the MAC address when resuming. For resuming from runtime-suspend we had this in place already, for resuming from S3/S5 it was missing. The commit referenced as being fixed isn't wrong, it's just the first one where the patch applies cleanly. Fixes: 0f07bd85 ("r8169: use dev_get_drvdata where possible") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reported-by:
Albert Astals Cid <aacid@kde.org> Tested-by:
-
Jisheng Zhang authored
[ Upstream commit 49ce881c ] Commit 984203ce ("net: stmmac: mdio: remove reset gpio free") removed the reset gpio free, when the driver is unbinded or rmmod, we miss the gpio free. This patch uses managed API to request the reset gpio, so that the gpio could be freed properly. Fixes: 984203ce ("net: stmmac: mdio: remove reset gpio free") Signed-off-by:
Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by:
-
Vlad Buslov authored
[ Upstream commit 4097e9d2 ] Function tcf_action_dump() relies on tc_action->order field when starting nested nla to send action data to userspace. This approach breaks in several cases: - When multiple filters point to same shared action, tc_action->order field is overwritten each time it is attached to filter. This causes filter dump to output action with incorrect attribute for all filters that have the action in different position (different order) from the last set tc_action->order value. - When action data is displayed using tc action API (RTM_GETACTION), action order is overwritten by tca_action_gd() according to its position in resulting array of nl attributes, which will break filter dump for all filters attached to that shared action that expect it to have different order value. Don't rely on tc_action->order when dumping actions. Set nla according to action position in resulting array of actions instead. Signed-off-by:
Vlad Buslov <vladbu@mellanox.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Russell King authored
[ Upstream commit 3d3ced2e ] Some boards do not have the PHY firmware programmed in the 3310's flash, which leads to the PHY not working as expected. Warn the user when the PHY fails to boot the firmware and refuse to initialise. Fixes: 20b2af32 ("net: phy: add Marvell Alaska X 88X3310 10Gigabit PHY support") Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Tested-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by:
-
Antoine Tenart authored
[ Upstream commit 21808437 ] MVPP2_TXQ_SCHED_TOKEN_CNTR_REG() expects the logical queue id but the current code is passing the global tx queue offset, so it ends up writing to unknown registers (between 0x8280 and 0x82fc, which seemed to be unused by the hardware). This fixes the issue by using the logical queue id instead. Fixes: 3f518509 ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by:
Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by:
-
Jisheng Zhang authored
[ Upstream commit d484e06e ] Fix below issues in err code path of probe: 1. we don't need to unregister_netdev() because the netdev isn't registered. 2. when register_netdev() fails, we also need to destroy bm pool for HWBM case. Fixes: dc35a10f ("net: mvneta: bm: add support for hardware buffer management") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit a4270d67 ] If a network driver provides to napi_gro_frags() an skb with a page fragment of exactly 14 bytes, the call to gro_pull_from_frag0() will 'consume' the fragment by calling skb_frag_unref(skb, 0), and the page might be freed and reused. Reading eth->h_proto at the end of napi_frags_skb() might read mangled data, or crash under specific debugging features. BUG: KASAN: use-after-free in napi_frags_skb net/core/dev.c:5833 [inline] BUG: KASAN: use-after-free in napi_gro_frags+0xc6f/0xd10 net/core/dev.c:5841 Read of size 2 at addr ffff88809366840c by task syz-executor599/8957 CPU: 1 PID: 8957 Comm: syz-executor599 Not tainted 5.2.0-rc1+ #32 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:188 __kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 kasan_report+0x12/0x20 mm/kasan/common.c:614 __asan_report_load_n_noabort+0xf/0x20 mm/kasan/generic_report.c:142 napi_frags_skb net/core/dev.c:5833 [inline] napi_gro_frags+0xc6f/0xd10 net/core/dev.c:5841 tun_get_user+0x2f3c/0x3ff0 drivers/net/tun.c:1991 tun_chr_write_iter+0xbd/0x156 drivers/net/tun.c:2037 call_write_iter include/linux/fs.h:1872 [inline] do_iter_readv_writev+0x5f8/0x8f0 fs/read_write.c:693 do_iter_write fs/read_write.c:970 [inline] do_iter_write+0x184/0x610 fs/read_write.c:951 vfs_writev+0x1b3/0x2f0 fs/read_write.c:1015 do_writev+0x15b/0x330 fs/read_write.c:1058 Fixes: a50e233c ("net-gro: restore frag0 optimization") Signed-off-by:
-
Andy Duan authored
[ Upstream commit ce8d24f9 ] Fix the clk mismatch in the error path "failed_reset" because below error path will disable clk_ahb and clk_ipg directly, it should use pm_runtime_put_noidle() instead of pm_runtime_put() to avoid to call runtime resume callback. Reported-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
Fugang Duan <fugang.duan@nxp.com> Tested-by:
-
Rasmus Villemoes authored
[ Upstream commit 84b3fd1f ] Currently, the upper half of a 4-byte STATS_TYPE_PORT statistic ends up in bits 47:32 of the return value, instead of bits 31:16 as they should. Fixes: 6e46e2d8 ("net: dsa: mv88e6xxx: Fix u64 statistics") Signed-off-by:
Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by:
Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by:
-
Jiri Pirko authored
[ Upstream commit ef744220 ] When identical rules are inserted, the latter one goes to C-TCAM. For that, a second eRP with the same mask is created. These 2 eRPs by the nature cannot be merged and also one cannot be parent of another. Teach mlxsw_sp_acl_erp_delta_fill() about this possibility and handle it gracefully. Reported-by:
Alex Kushnarov <alexanderk@mellanox.com> Fixes: c22291f7 ("mlxsw: spectrum: acl: Implement delta for ERP") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 8fb44d60 ] If llc_mac_hdr_init() returns an error, we must drop the skb since no llc_build_and_send_ui_pkt() caller will take care of this. BUG: memory leak unreferenced object 0xffff8881202b6800 (size 2048): comm "syz-executor907", pid 7074, jiffies 4294943781 (age 8.590s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 1a 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............ backtrace: [<00000000e25b5abe>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline] [<00000000e25b5abe>] slab_post_alloc_hook mm/slab.h:439 [inline] [<00000000e25b5abe>] slab_alloc mm/slab.c:3326 [inline] [<00000000e25b5abe>] __do_kmalloc mm/slab.c:3658 [inline] [<00000000e25b5abe>] __kmalloc+0x161/0x2c0 mm/slab.c:3669 [<00000000a1ae188a>] kmalloc include/linux/slab.h:552 [inline] [<00000000a1ae188a>] sk_prot_alloc+0xd6/0x170 net/core/sock.c:1608 [<00000000ded25bbe>] sk_alloc+0x35/0x2f0 net/core/sock.c:1662 [<000000002ecae075>] llc_sk_alloc+0x35/0x170 net/llc/llc_conn.c:950 [<00000000551f7c47>] llc_ui_create+0x7b/0x140 net/llc/af_llc.c:173 [<0000000029027f0e>] __sock_create+0x164/0x250 net/socket.c:1430 [<000000008bdec225>] sock_create net/socket.c:1481 [inline] [<000000008bdec225>] __sys_socket+0x69/0x110 net/socket.c:1523 [<00000000b6439228>] __do_sys_socket net/socket.c:1532 [inline] [<00000000b6439228>] __se_sys_socket net/socket.c:1530 [inline] [<00000000b6439228>] __x64_sys_socket+0x1e/0x30 net/socket.c:1530 [<00000000cec820c1>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:301 [<000000000c32554f>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 BUG: memory leak unreferenced object 0xffff88811d750d00 (size 224): comm "syz-executor907", pid 7074, jiffies 4294943781 (age 8.600s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 f0 0c 24 81 88 ff ff 00 68 2b 20 81 88 ff ff ...$.....h+ .... backtrace: [<0000000053026172>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline] [<0000000053026172>] slab_post_alloc_hook mm/slab.h:439 [inline] [<0000000053026172>] slab_alloc_node mm/slab.c:3269 [inline] [<0000000053026172>] kmem_cache_alloc_node+0x153/0x2a0 mm/slab.c:3579 [<00000000fa8f3c30>] __alloc_skb+0x6e/0x210 net/core/skbuff.c:198 [<00000000d96fdafb>] alloc_skb include/linux/skbuff.h:1058 [inline] [<00000000d96fdafb>] alloc_skb_with_frags+0x5f/0x250 net/core/skbuff.c:5327 [<000000000a34a2e7>] sock_alloc_send_pskb+0x269/0x2a0 net/core/sock.c:2225 [<00000000ee39999b>] sock_alloc_send_skb+0x32/0x40 net/core/sock.c:2242 [<00000000e034d810>] llc_ui_sendmsg+0x10a/0x540 net/llc/af_llc.c:933 [<00000000c0bc8445>] sock_sendmsg_nosec net/socket.c:652 [inline] [<00000000c0bc8445>] sock_sendmsg+0x54/0x70 net/socket.c:671 [<000000003b687167>] __sys_sendto+0x148/0x1f0 net/socket.c:1964 [<00000000922d78d9>] __do_sys_sendto net/socket.c:1976 [inline] [<00000000922d78d9>] __se_sys_sendto net/socket.c:1972 [inline] [<00000000922d78d9>] __x64_sys_sendto+0x2a/0x30 net/socket.c:1972 [<00000000cec820c1>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:301 [<000000000c32554f>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
David Ahern authored
[ Upstream commit 31680ac2 ] IPv6 redirect is broken for VRF. __ip6_route_redirect walks the FIB entries looking for an exact match on ifindex. With VRF the flowi6_oif is updated by l3mdev_update_flow to the l3mdev index and the FLOWI_FLAG_SKIP_NH_OIF set in the flags to tell the lookup to skip the device match. For redirects the device match is requires so use that flag to know when the oif needs to be reset to the skb device index. Fixes: ca254490 ("net: Add VRF support to IPv6 stack") Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Mike Manning authored
[ Upstream commit 72f7cfab ] IPv6 does not consider if the socket is bound to a device when binding to an address. The result is that a socket can be bound to eth0 and then bound to the address of eth1. If the device is a VRF, the result is that a socket can only be bound to an address in the default VRF. Resolve by considering the device if sk_bound_dev_if is set. Signed-off-by:
Mike Manning <mmanning@vyatta.att-mail.com> Reviewed-by:
-
Eric Dumazet authored
[ Upstream commit 903869bd ] ip_sf_list_clear_all() needs to be defined even if !CONFIG_IP_MULTICAST Fixes: 3580d04a ("ipv4/igmp: fix another memory leak in igmpv3_del_delrec()") Signed-off-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 3580d04a ] syzbot reported memory leaks [1] that I have back tracked to a missing cleanup from igmpv3_del_delrec() when (im->sfmode != MCAST_INCLUDE) Add ip_sf_list_clear_all() and kfree_pmc() helpers to explicitely handle the cleanups before freeing. [1] BUG: memory leak unreferenced object 0xffff888123e32b00 (size 64): comm "softirq", pid 0, jiffies 4294942968 (age 8.010s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 e0 00 00 01 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000006105011b>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline] [<000000006105011b>] slab_post_alloc_hook mm/slab.h:439 [inline] [<000000006105011b>] slab_alloc mm/slab.c:3326 [inline] [<000000006105011b>] kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553 [<000000004bba8073>] kmalloc include/linux/slab.h:547 [inline] [<000000004bba8073>] kzalloc include/linux/slab.h:742 [inline] [<000000004bba8073>] ip_mc_add1_src net/ipv4/igmp.c:1961 [inline] [<000000004bba8073>] ip_mc_add_src+0x36b/0x400 net/ipv4/igmp.c:2085 [<00000000a46a65a0>] ip_mc_msfilter+0x22d/0x310 net/ipv4/igmp.c:2475 [<000000005956ca89>] do_ip_setsockopt.isra.0+0x1795/0x1930 net/ipv4/ip_sockglue.c:957 [<00000000848e2d2f>] ip_setsockopt+0x3b/0xb0 net/ipv4/ip_sockglue.c:1246 [<00000000b9db185c>] udp_setsockopt+0x4e/0x90 net/ipv4/udp.c:2616 [<000000003028e438>] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3130 [<0000000015b65589>] __sys_setsockopt+0x98/0x120 net/socket.c:2078 [<00000000ac198ef0>] __do_sys_setsockopt net/socket.c:2089 [inline] [<00000000ac198ef0>] __se_sys_setsockopt net/socket.c:2086 [inline] [<00000000ac198ef0>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2086 [<000000000a770437>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:301 [<00000000d3adb93b>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 9c8bb163 ("igmp, mld: Fix memory leak in igmpv3/mld_del_delrec()") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit df453700 ] According to Amit Klein and Benny Pinkas, IP ID generation is too weak and might be used by attackers. Even with recent net_hash_mix() fix (netns: provide pure entropy for net_hash_mix()) having 64bit key and Jenkins hash is risky. It is time to switch to siphash and its 128bit keys. Signed-off-by:
Amit Klein <aksecurity@gmail.com> Reported-by:
Benny Pinkas <benny@pinkas.net> Signed-off-by:
-
Maxime Chevallier authored
[ Upstream commit b73484b2 ] When parsing an ethtool flow spec to build a flow_rule, the code checks if both the vlan etype and the vlan tci are specified by the user to add a FLOW_DISSECTOR_KEY_VLAN match. However, when the user only specified a vlan etype or a vlan tci, this check silently ignores these parameters. For example, the following rule : ethtool -N eth0 flow-type udp4 vlan 0x0010 action -1 loc 0 will result in no error being issued, but the equivalent rule will be created and passed to the NIC driver : ethtool -N eth0 flow-type udp4 action -1 loc 0 In the end, neither the NIC driver using the rule nor the end user have a way to know that these keys were dropped along the way, or that incorrect parameters were entered. This kind of check should be left to either the driver, or the ethtool flow spec layer. This commit makes so that ethtool parameters are forwarded as-is to the NIC driver. Since none of the users of ethtool_rx_flow_rule_create are using the VLAN dissector, I don't think this qualifies as a regression. Fixes: eca4205f ("ethtool: add ethtool_rx_flow_spec to flow_rule structure translator") Signed-off-by:
Pablo Neira Ayuso <pablo@gnumonks.org> Signed-off-by:
-
Raju Rangoju authored
[ Upstream commit b5730061 ] VLAN flows never get offloaded unless ivlan_vld is set in filter spec. It's not compulsory for vlan_ethtype to be set. So, always enable ivlan_vld bit for offloading VLAN flows regardless of vlan_ethtype is set or not. Fixes: ad9af3e0 (cxgb4: add tc flower match support for vlan) Signed-off-by:
Raju Rangoju <rajur@chelsio.com> Signed-off-by:
-
Jarod Wilson authored
[ Upstream commit 33403121 ] Once in a while, with just the right timing, 802.3ad slaves will fail to properly initialize, winding up in a weird state, with a partner system mac address of 00:00:00:00:00:00. This started happening after a fix to properly track link_failure_count tracking, where an 802.3ad slave that reported itself as link up in the miimon code, but wasn't able to get a valid speed/duplex, started getting set to BOND_LINK_FAIL instead of BOND_LINK_DOWN. That was the proper thing to do for the general "my link went down" case, but has created a link initialization race that can put the interface in this odd state. The simple fix is to instead set the slave link to BOND_LINK_DOWN again, if the link has never been up (last_link_up == 0), so the link state doesn't bounce from BOND_LINK_DOWN to BOND_LINK_FAIL -- it hasn't failed in this case, it simply hasn't been up yet, and this prevents the unnecessary state change from DOWN to FAIL and getting stuck in an init failure w/o a partner mac. Fixes: ea53abfa ("bonding/802.3ad: fix link_failure_count tracking") CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: "David S. Miller" <davem@davemloft.net> CC: netdev@vger.kernel.org Tested-by:
Heesoon Kim <Heesoon.Kim@stratus.com> Signed-off-by:
Jarod Wilson <jarod@redhat.com> Acked-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
-
- 31 May, 2019 3 commits
-
-
Greg Kroah-Hartman authored
-
Benjamin Coddington authored
[ Upstream commit c260121a ] Now that nfs_match_client drops the nfs_client_lock, we should be careful to always return it in the same condition: locked. Fixes: 950a578c ("NFS: make nfs_match_client killable") Reported-by: syzbot+228a82b263b5da91883d@syzkaller.appspotmail.com Signed-off-by:
Benjamin Coddington <bcodding@redhat.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Maxime Ripard authored
[ Upstream commit efa31801 ] The Allwinner BSP makes sure that we don't end up with a null start delay or with a delay larger than vtotal. The former condition is likely to happen now with the reworked start delay, so make sure we enforce the same boundaries. Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/c9889cf5f7a3d101ef380905900b45a182596f56.1549896081.git-series.maxime.ripard@bootlin.comSigned-off-by:
-
