- 14 Sep, 2012 7 commits
-
-
Will Deacon authored
commit 730a8128 upstream. Commit 5a783cbc ("ARM: 7478/1: errata: extend workaround for erratum #720789") added workarounds for erratum #720789 to the range TLB invalidation functions with the observation that the erratum only affects SMP platforms. However, when running an SMP_ON_UP kernel on a uniprocessor platform we must take care to preserve the ASID as the workaround is not required. This patch ensures that we don't set the ASID to 0 when flushing the TLB on such a system, preserving the original behaviour with the workaround disabled. Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Will Deacon authored
commit f5f2025e upstream. Page migration encodes the pfn in the offset field of a swp_entry_t. For LPAE, we support physical addresses of up to 36 bits (due to sparsemem limitations with the size of page flags), requiring 24 bits to represent a pfn. A further 3 bits are used to encode a swp_entry into a pte, leaving 5 bits for the type field. Furthermore, the core code defines MAX_SWAPFILES_SHIFT as 5, so the additional type bit does not get used. This patch reduces the width of the type field to 5 bits, allowing us to create up to 31 swapfiles of 64GB each. Reviewed-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Will Deacon authored
commit 47f12043 upstream. Swap entries are encoding in ptes such that !pte_present(pte) and pte_file(pte). The remaining bits of the descriptor are used to identify the swapfile and offset within it to the swap entry. When writing such a pte for a user virtual address, set_pte_at unconditionally sets the nG bit, which (in the case of LPAE) will corrupt the swapfile offset and lead to a BUG: [ 140.494067] swap_free: Unused swap offset entry 000763b4 [ 140.509989] BUG: Bad page map in process rs:main Q:Reg pte:0ec76800 pmd:8f92e003 This patch fixes the problem by only setting the nG bit for user mappings that are actually present. Reviewed-by:
-
Will Deacon authored
commit 3d9fb003 upstream. VFPv4 support depends on the VFPv3 context save/restore code, so only advertise support in the hwcaps if the kernel can actually handle it. Signed-off-by:
-
Wang Xingchao authored
commit 088c820b upstream. As spec said, 1 indicates no copyright is asserted. Signed-off-by:
Wang Xingchao <xingchao.wang@intel.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Greg Kroah-Hartman authored
commit 83957df2 upstream. This structure needs to always stick around, even if CONFIG_HOTPLUG is disabled, otherwise we can oops when trying to probe a device that was added after the structure is thrown away. Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down. Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Reported-by:
Bjørn Mork <bjorn@mork.no> CC: Paul Gortmaker <paul.gortmaker@windriver.com> CC: Andrew Morton <akpm@linux-foundation.org> CC: Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Greg Kroah-Hartman authored
commit 4d088876 upstream. This structure needs to always stick around, even if CONFIG_HOTPLUG is disabled, otherwise we can oops when trying to probe a device that was added after the structure is thrown away. Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down. Reported-by:
-
- 26 Aug, 2012 33 commits
-
-
Greg Kroah-Hartman authored
-
Jeongdo Son authored
commit a769f957 upstream. This is a RT3070 based device. Signed-off-by:
Jeongdo Son <sohn9086@gmail.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Michael Grzeschik authored
commit b1b552a6 upstream. This patch fixes an issue introduced by patch: 72c973dd usb: gadget: add usb_endpoint_descriptor to struct usb_ep Without this patch we see a kworker taking 100% CPU, after this sequence: - Connect gadget to a windows host - load g_ether - ifconfig up <ip>; ifconfig down; ifconfig up - ping <windows host> The "ifconfig down" results in calling eth_stop(), which will call usb_ep_disable() and, if the carrier is still ok, usb_ep_enable(): usb_ep_disable(link->in_ep); usb_ep_disable(link->out_ep); if (netif_carrier_ok(net)) { usb_ep_enable(link->in_ep); usb_ep_enable(link->out_ep); } The ep should stay enabled, but will not, as ep_disable set the desc pointer to NULL, therefore the subsequent ep_enable will fail. This leads to permanent rescheduling of the eth_work() worker as usb_ep_queue() (called by the worker) will fail due to the unconfigured endpoint. We fix this issue by saving the ep descriptors and re-assign them before usb_ep_enable(). Cc: Tatyana Brokhman <tlinder@codeaurora.org> Signed-off-by:
Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Mark Ferrell authored
commit 5c263b92 upstream. * Use the buffer content length as opposed to the total buffer size. This can be a real problem when using the mos7840 as a usb serial-console as all kernel output is truncated during boot. Signed-off-by:
Mark Ferrell <mferrell@uplogix.com> Signed-off-by:
-
Ozan Çağlayan authored
commit 7724a1ed upstream. This adds VID/PID for Kondo Kagaku Co. Ltd. Serial USB Adapter interface: http://www.kondo-robot.com/EN/wp/?cat=28 Tested by controlling an RCB3 board using libRCB3. Signed-off-by:
Ozan Çağlayan <ozancag@gmail.com> Signed-off-by:
-
Bjørn Mork authored
commit f1b5c997 upstream. The ZTE (Vodafone) K5006-Z use the following interface layout: 00 DIAG 01 secondary 02 modem 03 networkcard 04 storage Ignoring interface #3 which is handled by the qmi_wwan driver. Signed-off-by:
-
fangxiaozhi authored
commit ee6f827d upstream. In this patch, we add new declarations into option.c to support the new interfaces of Huawei Data Card devices. And at the same time, remove the redundant declarations from option.c. Signed-off-by:
fangxiaozhi <huananhu@huawei.com> Signed-off-by:
-
Bart Van Assche authored
commit 22032991 upstream. Avoid a crash caused by the scmnd->scsi_done(scmnd) call in srp_process_rsp() being invoked with scsi_done == NULL. This can happen if a reply is received during or after a command abort. Reported-by:
Joseph Glanville <joseph.glanville@orionvm.com.au> Reference: http://marc.info/?l=linux-rdma&m=134314367801595Acked-by:
David Dillow <dillowda@ornl.gov> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Jason Wessel authored
commit 38f8eefc upstream. kdb <-> kgdb transitioning does not work properly with this UART driver because the get character routine loops indefinitely as opposed to returning NO_POLL_CHAR per the expectation of the KDB I/O driver API. The symptom is a kernel hang when trying to switch debug modes. Signed-off-by:
Jason Wessel <jason.wessel@windriver.com> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Gustavo Padovan authored
commit d81a5d19 upstream. A lot of Broadcom Bluetooth devices provides vendor specific interface class and we are getting flooded by patches adding new device support. This change will help us enable support for any other Broadcom with vendor specific device that arrives in the future. Only the product id changes for those devices, so this macro would be perfect for us: { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01) } Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by:
Henrik Rydberg <rydberg@bitmath.se> Signed-off-by:
-
Sarah Sharp authored
commit 50d0206f upstream. This patch fixes a particularly nasty bug that was revealed by the ring expansion patches. The bug has been present since the very beginning of the xHCI driver history, and could have caused general protection faults from bad memory accesses. The first thing to note is that a Set TR Dequeue Pointer command can move the dequeue pointer to a link TRB, if the canceled or stalled transfer TD ended just before a link TRB. The function to increment the dequeue pointer, inc_deq, was written before cancellation and stall support was added. It assumed that the dequeue pointer could never point to a link TRB. It would unconditionally increment the dequeue pointer at the start of the function, check if the pointer was now on a link TRB, and move it to the top of the next segment if so. This means that if a Set TR Dequeue Point command moved the dequeue pointer to a link TRB, a subsequent call to inc_deq() would move the pointer off the segment and into la-la-land. It would then read from that memory to determine if it was a link TRB. Other functions would often call inc_deq() until the dequeue pointer matched some other pointer, which means this function would quite happily read all of system memory before wrapping around to the right pointer value. Often, there would be another endpoint segment from a different ring allocated from the same DMA pool, which would be contiguous to the segment inc_deq just stepped off of. inc_deq would eventually find the link TRB in that segment, and blindly move the dequeue pointer back to the top of the correct ring segment. The only reason the original code worked at all is because there was only one ring segment. With the ring expansion patches, the dequeue pointer would eventually wrap into place, but the dequeue segment would be out-of-sync. On the second TD after the dequeue pointer was moved to a link TRB, trb_in_td() would fail (because the dequeue pointer and dequeue segment were out-of-sync), and this message would appear: ERROR Transfer event TRB DMA ptr not part of current TD This fixes bugzilla entry 4333 (option-based modem unhappy on USB 3.0 port: "Transfer event TRB DMA ptr not part of current TD", "rejecting I/O to offline device"), https://bugzilla.kernel.org/show_bug.cgi?id=43333 and possibly other general protection fault bugs as well. This patch should be backported to kernels as old as 2.6.31. A separate patch will be created for kernels older than 3.4, since inc_deq was modified in 3.4 and this patch will not apply. Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by:
James Ettle <theholyettlz@googlemail.com> Tested-by:
Matthew Hall <mhall@mhcomputing.net> Signed-off-by:
-
Sarah Sharp authored
commit e95829f4 upstream. The Intel desktop boards DH77EB and DH77DF have a hardware issue that can be worked around by BIOS. If the USB ports are switched to xHCI on shutdown, the xHCI host will send a spurious interrupt, which will wake the system. Some BIOS will work around this, but not all. The bug can be avoided if the USB ports are switched back to EHCI on shutdown. The Intel Windows driver switches the ports back to EHCI, so change the Linux xHCI driver to do the same. Unfortunately, we can't tell the two effected boards apart from other working motherboards, because the vendors will change the DMI strings for the DH77EB and DH77DF boards to their own custom names. One example is Compulab's mini-desktop, the Intense-PC. Instead, key off the Panther Point xHCI host PCI vendor and device ID, and switch the ports over for all PPT xHCI hosts. The only impact this will have on non-effected boards is to add a couple hundred milliseconds delay on boot when the BIOS has to switch the ports over from EHCI to xHCI. This patch should be backported to kernels as old as 3.0, that contain the commit 69e848c2 "Intel xhci: Support EHCI/xHCI port switching." Signed-off-by:
Denis Turischev <denis@compulab.co.il> Tested-by:
-
Sarah Sharp authored
commit 22ceac19 upstream. The NEC/Renesas 720201 xHCI host controller does not complete its reset within 250 milliseconds. In fact, it takes about 9 seconds to reset the host controller, and 1 second for the host to be ready for doorbell rings. Extend the reset and CNR polling timeout to 10 seconds each. This patch should be backported to kernels as old as 2.6.31, that contain the commit 66d4eadd "USB: xhci: BIOS handoff and HW initialization." Signed-off-by:
Edwin Klein Mentink <e.kleinmentink@zonnet.nl> Signed-off-by:
-
Sarah Sharp authored
commit 5cb7df2b upstream. Gary reports that with recent kernels, he notices more xHCI driver warnings: xhci_hcd 0000:03:00.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? We think his Etron xHCI host controller may have the same buggy behavior as the Fresco Logic xHCI host. When a short transfer is received, the host will mark the transfer as successfully completed when it should be marking it with a short completion. Fix this by turning on the XHCI_TRUST_TX_LENGTH quirk when the Etron host is discovered. Note that Gary has revision 1, but if Etron fixes this bug in future revisions, the quirk will have no effect. This patch should be backported to kernels as old as 2.6.36, that contain a backported version of commit 1530bbc6 "xhci: Add new short TX quirk for Fresco Logic host." Signed-off-by:
Gary E. Miller <gem@rellim.com> Signed-off-by:
-
Theodore Ts'o authored
commit 89a4e48f upstream. Commit 968dee77: "ext4: fix hole punch failure when depth is greater than 0" introduced a regression in v3.5.1/v3.6-rc1 which caused kernel crashes when users ran run "rm -rf" on large directory hierarchy on ext4 filesystems on RAID devices: BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 Process rm (pid: 18229, threadinfo ffff8801276bc000, task ffff880123631710) Call Trace: [<ffffffff81236483>] ? __ext4_handle_dirty_metadata+0x83/0x110 [<ffffffff812353d3>] ext4_ext_truncate+0x193/0x1d0 [<ffffffff8120a8cf>] ? ext4_mark_inode_dirty+0x7f/0x1f0 [<ffffffff81207e05>] ext4_truncate+0xf5/0x100 [<ffffffff8120cd51>] ext4_evict_inode+0x461/0x490 [<ffffffff811a1312>] evict+0xa2/0x1a0 [<ffffffff811a1513>] iput+0x103/0x1f0 [<ffffffff81196d84>] do_unlinkat+0x154/0x1c0 [<ffffffff8118cc3a>] ? sys_newfstatat+0x2a/0x40 [<ffffffff81197b0b>] sys_unlinkat+0x1b/0x50 [<ffffffff816135e9>] system_call_fastpath+0x16/0x1b Code: 8b 4d 20 0f b7 41 02 48 8d 04 40 48 8d 04 81 49 89 45 18 0f b7 49 02 48 83 c1 01 49 89 4d 00 e9 ae f8 ff ff 0f 1f 00 49 8b 45 28 <48> 8b 40 28 49 89 45 20 e9 85 f8 ff ff 0f 1f 80 00 00 00 RIP [<ffffffff81233164>] ext4_ext_remove_space+0xa34/0xdf0 This could be reproduced as follows: The problem in commit 968dee77 was that caused the variable 'i' to be left uninitialized if the truncate required more space than was available in the journal. This resulted in the function ext4_ext_truncate_extend_restart() returning -EAGAIN, which caused ext4_ext_remove_space() to restart the truncate operation after starting a new jbd2 handle. Reported-by:
Maciej Żenczykowski <maze@google.com> Reported-by:
Marti Raudsepp <marti@juffo.org> Tested-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Theodore Ts'o authored
commit 0548bbb8 upstream. Commit 8aeb00ff: "ext4: fix overhead calculation used by ext4_statfs()" introduced a O(n**2) calculation which makes very large file systems take forever to mount. Fix this with an optimization for non-bigalloc file systems. (For bigalloc file systems the overhead needs to be set in the the superblock.) Signed-off-by:
-
Theodore Ts'o authored
commit 7e731bc9 upstream. Commit 03179fe9 introduced a kmemcheck complaint in ext4_da_get_block_prep() because we save and restore ei->i_da_metadata_calc_last_lblock even though it is left uninitialized in the case where i_da_metadata_calc_len is zero. This doesn't hurt anything, but silencing the kmemcheck complaint makes it easier for people to find real bugs. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=45631 (which is marked as a regression). Signed-off-by:
-
Theodore Ts'o authored
commit d796c52e upstream. After we transfer set the EXT4_ERROR_FS bit in the file system superblock, it's not enough to call jbd2_journal_clear_err() to clear the error indication from journal superblock --- we need to call jbd2_journal_update_sb_errno() as well. Otherwise, when the root file system is mounted read-only, the journal is replayed, and the error indicator is transferred to the superblock --- but the s_errno field in the jbd2 superblock is left set (since although we cleared it in memory, we never flushed it out to disk). This can end up confusing e2fsck. We should make e2fsck more robust in this case, but the kernel shouldn't be leaving things in this confused state, either. Signed-off-by:
-
Alex Deucher authored
commit c8d15edc upstream. Handle the 16 bank case. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 5b23c904 upstream. Handle the 16 bank case. Signed-off-by:
-
Alex Deucher authored
commit 2f292004 upstream. Signed-off-by:
-
Jerome Glisse authored
commit 81ee8fb6 upstream. It seems we can not update the crtc scanout address. After disabling crtc, update to base address do not take effect after crtc being reenable leading to at least frame being scanout from the old crtc base address. Disabling crtc display request lead to same behavior. So after changing the vram address if we don't keep crtc disabled we will have the GPU trying to read some random system memory address with some iommu this will broke the crtc engine and will lead to broken display and iommu error message. So to avoid this, disable crtc. For flicker less boot we will need to avoid moving the vram start address. This patch should also fix : https://bugs.freedesktop.org/show_bug.cgi?id=42373Signed-off-by:
Jerome Glisse <jglisse@redhat.com> Signed-off-by:
-
Alex Deucher authored
commit 6c0ae2ab upstream. Need to make sure the crtc is gated on before modesetting. Explicitly gate the crtc on in prepare() and set a flag so that the dpms functions don't gate it off during mode set. Noticed by sylware on IRC. Signed-off-by:
-
Daniel Vetter authored
commit 35a38556 upstream. eDP is tons of fun. It turns out that at least the new MacBook Air 5,1 model absolutely doesn't like the new force vdd dance we've introduced in commit 6cb49835 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sun May 20 17:14:50 2012 +0200 drm/i915: enable vdd when switching off the eDP panel But that patch also tried to fix some neat edp sequence issue with the force_vdd timings. Closer inspection reveals that we've raised force_vdd only to do the aux channel communication dp_sink_dpms. If we move the edp_panel_off below that, we don't need any force_vdd for the disable sequence, which makes the Air happy. Unfortunately the reporter of the original bug that the above commit fixed is travelling, so we can't test whether this regresses things. But my theory is that since we don't check for any power-off -> force_vdd-on delays in edp_panel_vdd_on, this was the actual root-cause of this failure. With that force_vdd dance completely eliminated, I'm hopeful the original bug stays fixed, too. For reference the old bug, which hopefully doesn't get broken by this: https://bugzilla.kernel.org/show_bug.cgi?id=43163 In any case, regression fixers win over plain bugfixes, so this needs to go in asap. v2: The crucial pieces seems to be to clear the force_vdd flag uncoditionally, too, in edp_panel_off. Looks like this is left behind by the firmware somehow. v3: The Apple firmware seems to switch off the panel on it's own, hence we still need to keep force_vdd on, but properly clear it when switching the panel off. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=45671Tested-by:
Roberto Romer <sildurin@gmail.com> Tested-by:
Daniel Wagner <wagi@monom.org> Tested-by:
Keith Packard <keithp@keithp.com> Cc: Keith Packard <keithp@keithp.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Daniel Vetter authored
commit 4344b813 upstream. This has originally been introduced to not oversubscribe the dp links in commit 885a5fb5 Author: Zhenyu Wang <zhenyuw@linux.intel.com> Date: Tue Jan 12 05:38:31 2010 +0800 drm/i915: fix pixel color depth setting on eDP Since then we've fixed up the dp link bandwidth calculation code and should now automatically fall back to 6bpc dithering. So this is unnecessary. Furthermore it seems to break the new MacbookPro with retina display, hence let's just rip this out. Reported-by:
Benoit Gschwind <gschwind@gnu-log.net> Cc: Benoit Gschwind <gschwind@gnu-log.net> Cc: Francois Rigaut <frigaut@gmail.com> Tested-by:
-
Daniel Vetter authored
commit 0d8957c8 upstream. We may only start to set up the new register values after having confirmed that the ring is truely off. Otherwise the hw might lose the newly written register values. This is caught later on in the init sequence, when we check whether the register writes have stuck. Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50522Tested-by:
Yang Guang <guang.a.yang@intel.com> Signed-off-by:
-
Christoph Bumiller authored
commit af5e7d84 upstream. Signed-off-by:
Christoph Bumiller <e0425955@student.tuwien.ac.at> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Jesse Barnes authored
commit 2514bc51 upstream. High frequency link configurations have the potential to cause trouble with long and/or cheap cables, so prefer slow and wide configurations instead. This patch has the potential to cause trouble for eDP configurations that lie about available lanes, so if we run into that we can make it conditional on eDP. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45801 Tested-by: peter@colberg.org Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Stefano Stabellini authored
commit b9e0d95c upstream. When the frontend and the backend reside on the same domain, even if we add pages to the m2p_override, these pages will never be returned by mfn_to_pfn because the check "get_phys_to_machine(pfn) != mfn" will always fail, so the pfn of the frontend will be returned instead (resulting in a deadlock because the frontend pages are already locked). INFO: task qemu-system-i38:1085 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. qemu-system-i38 D ffff8800cfc137c0 0 1085 1 0x00000000 ffff8800c47ed898 0000000000000282 ffff8800be4596b0 00000000000137c0 ffff8800c47edfd8 ffff8800c47ec010 00000000000137c0 00000000000137c0 ffff8800c47edfd8 00000000000137c0 ffffffff82213020 ffff8800be4596b0 Call Trace: [<ffffffff81101ee0>] ? __lock_page+0x70/0x70 [<ffffffff81a0fdd9>] schedule+0x29/0x70 [<ffffffff81a0fe80>] io_schedule+0x60/0x80 [<ffffffff81101eee>] sleep_on_page+0xe/0x20 [<ffffffff81a0e1ca>] __wait_on_bit_lock+0x5a/0xc0 [<ffffffff81101ed7>] __lock_page+0x67/0x70 [<ffffffff8106f750>] ? autoremove_wake_function+0x40/0x40 [<ffffffff811867e6>] ? bio_add_page+0x36/0x40 [<ffffffff8110b692>] set_page_dirty_lock+0x52/0x60 [<ffffffff81186021>] bio_set_pages_dirty+0x51/0x70 [<ffffffff8118c6b4>] do_blockdev_direct_IO+0xb24/0xeb0 [<ffffffff811e71a0>] ? ext3_get_blocks_handle+0xe00/0xe00 [<ffffffff8118ca95>] __blockdev_direct_IO+0x55/0x60 [<ffffffff811e71a0>] ? ext3_get_blocks_handle+0xe00/0xe00 [<ffffffff811e91c8>] ext3_direct_IO+0xf8/0x390 [<ffffffff811e71a0>] ? ext3_get_blocks_handle+0xe00/0xe00 [<ffffffff81004b60>] ? xen_mc_flush+0xb0/0x1b0 [<ffffffff81104027>] generic_file_aio_read+0x737/0x780 [<ffffffff813bedeb>] ? gnttab_map_refs+0x15b/0x1e0 [<ffffffff811038f0>] ? find_get_pages+0x150/0x150 [<ffffffff8119736c>] aio_rw_vect_retry+0x7c/0x1d0 [<ffffffff811972f0>] ? lookup_ioctx+0x90/0x90 [<ffffffff81198856>] aio_run_iocb+0x66/0x1a0 [<ffffffff811998b8>] do_io_submit+0x708/0xb90 [<ffffffff81199d50>] sys_io_submit+0x10/0x20 [<ffffffff81a18d69>] system_call_fastpath+0x16/0x1b The explanation is in the comment within the code: We need to do this because the pages shared by the frontend (xen-blkfront) can be already locked (lock_page, called by do_read_cache_page); when the userspace backend tries to use them with direct_IO, mfn_to_pfn returns the pfn of the frontend, so do_blockdev_direct_IO is going to try to lock the same pages again resulting in a deadlock. A simplified call graph looks like this: pygrub QEMU ----------------------------------------------- do_read_cache_page io_submit | | lock_page ext3_direct_IO | bio_add_page | lock_page Internally the xen-blkback uses m2p_add_override to swizzle (temporarily) a 'struct page' to have a different MFN (so that it can point to another guest). It also can easily find out whether another pfn corresponding to the mfn exists in the m2p, and can set the FOREIGN bit in the p2m, making sure that mfn_to_pfn returns the pfn of the backend. This allows the backend to perform direct_IO on these pages, but as a side effect prevents the frontend from using get_user_pages_fast on them while they are being shared with the backend. Signed-off-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Zach Brown authored
commit fb6ccff6 upstream. Commit 7572777e attempted to verify that the total iovec from the client doesn't overflow iov_length() but it only checked the first element. The iovec could still overflow by starting with a small element. The obvious fix is to check all the elements. The overflow case doesn't look dangerous to the kernel as the copy is limited by the length after the overflow. This fix restores the intention of returning an error instead of successfully copying less than the iovec represented. I found this by code inspection. I built it but don't have a test case. I'm cc:ing stable because the initial commit did as well. Signed-off-by:
Zach Brown <zab@redhat.com> Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
-
Fabio Estevam authored
commit a2367db2 upstream. With the new i.MX clock infrastructure we need to request the dma clocks seperately: ahb and ipg clocks. This fixes the following kernel crash and make audio to be functional again: root@freescale /home$ aplay audio48k16S.wav Playing WAVE 'audio48k16S.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c7b74000 [00000000] *pgd=a7bb5831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] PREEMPT ARM Modules linked in: CPU: 0 Not tainted (3.5.0-rc5-next-20120702-00007-g3028b64 #1128) PC is at snd_dmaengine_pcm_get_chan+0x8/0x10 LR is at snd_imx_pcm_hw_params+0x18/0xdc pc : [<c02d3cf8>] lr : [<c02e95ec>] psr: a0000013 sp : c7b45e30 ip : ffffffff fp : c7ae58e0 r10: 00000000 r9 : c7ae981c r8 : c7b88800 r7 : c7ae5a60 r6 : c7ae5b20 r5 : c7ae9810 r4 : c7afa060 r3 : 00000000 r2 : 00000001 r1 : c7b88800 r0 : c7afa060 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 0005317f Table: a7b74000 DAC: 00000015 Process aplay (pid: 701, stack limit = 0xc7b44270) Stack: (0xc7b45e30 to 0xc7b46000) 5e20: 00100000 00000029 c7b88800 c02db870 5e40: c7ae5a60 c02d4594 00000010 01ae5a60 c7ae5a60 c7ae9810 c7ae9810 c7afa060 5e60: c7ae5b20 c7ae5a60 c7b88800 c02e3ef0 c02e3e08 c7b1e400 c7afa060 c7b88800 5e80: 00000000 c0014da8 c7b44000 00000000 bec566ac c02cd400 c7afa060 c7afa060 5ea0: bec56800 c7b88800 c0014da8 c02cdd7c c04ee710 c04ee7b8 00000003 c005fc74 5ec0: 00000000 7fffffff c7b45f00 c7afa060 c7b67420 c7ba3070 00000004 c0014da8 5ee0: c7b44000 00000000 bec566ac c02ced88 c04e95f8 b6f5ab04 c7b45fb0 0145a468 5f00: 0145a600 bec566bc bec56800 c7b67420 c7ba3070 c00d499c c7b45f18 c7b45f18 5f20: 0000001a 00000004 00000001 c7b44000 c0527f40 00000009 00000008 00000000 5f40: c7b44000 c002c9ec 00000001 c04f0ab0 c04ebec0 00000101 00000000 0000000a 5f60: 60000093 c7b67420 bec56800 c25c4111 00000004 c0014da8 c7b44000 00000000 5f80: bec566ac c00d4f38 b6ffb658 00000000 c0522d80 0145a468 b6fd5000 0145a418 5fa0: 00000036 c0014c00 0145a468 b6fd5000 00000004 c25c4111 bec56800 00020001 5fc0: 0145a468 b6fd5000 0145a418 00000036 0145a468 0145a600 bec566bc bec566ac 5fe0: 0145a468 bec56388 b6f65ce4 b6dcebec 20000010 00000004 00000000 00000000 [<c02d3cf8>] (snd_dmaengine_pcm_get_chan+0x8/0x10) from [<c02e95ec>] (snd_imx_pcm_hw_params+0x18/0xdc) [<c02e95ec>] (snd_imx_pcm_hw_params+0x18/0xdc) from [<c02e3ef0>] (soc_pcm_hw_params+0xe8/0x1f0) [<c02e3ef0>] (soc_pcm_hw_params+0xe8/0x1f0) from [<c02cd400>] (snd_pcm_hw_params+0x124/0x474) [<c02cd400>] (snd_pcm_hw_params+0x124/0x474) from [<c02cdd7c>] (snd_pcm_common_ioctl1+0x4b4/0xf74) [<c02cdd7c>] (snd_pcm_common_ioctl1+0x4b4/0xf74) from [<c02ced88>] (snd_pcm_playback_ioctl1+0x30/0x510) [<c02ced88>] (snd_pcm_playback_ioctl1+0x30/0x510) from [<c00d499c>] (do_vfs_ioctl+0x80/0x5e4) [<c00d499c>] (do_vfs_ioctl+0x80/0x5e4) from [<c00d4f38>] (sys_ioctl+0x38/0x60) [<c00d4f38>] (sys_ioctl+0x38/0x60) from [<c0014c00>] (ret_fast_syscall+0x0/0x2c) Code: e593000c e12fff1e e59030a0 e59330bc (e5930000) ---[ end trace fa518c8ba3a74e97 ]-- Reported-by:
Javier Martin <javier.martin@vista-silicon.com> Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Acked-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by:
-
Heiko Carstens authored
commit e8587121 upstream. The native 31 bit and the compat behaviour for the mmap system calls differ: In native 31 bit mode the passed in address for the mmap system call will be unmodified passed to sys_mmap_pgoff(). In compat mode however the passed in address will be modified with compat_ptr() which masks out the most significant bit. The result is that in native 31 bit mode each mmap request (with MAP_FIXED) will fail where the most significat bit is set, while in compat mode it may succeed. This odd behaviour was introduced with d3815898 "[S390] mmap: add missing compat_ptr conversion to both mmap compat syscalls". To restore a consistent behaviour accross native and compat mode this patch functionally reverts the above mentioned commit. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
commit 82aabdb6 upstream. The compat wrappers incorrectly called the non compat versions of the system process_vm system calls. Signed-off-by:
-
