display.c uses dsi_get_pixel_size() which is implemented in the DSI
driver, and we won't have that in the omapdss-base module, to which we
want to move display.c

This patch changes display.c not to use dsi_get_pixel_size(). The call
can be replaced with a simple check for OMAP_DSS_DSI_FMT_RGB565.

We can also make dsi_get_pixel_size() static as it's no longer used
outside dsi.c.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We don't have omapdss's custom error printing functions in the common
omapdss-base module, to which we want to move output.c.

This patch changes output.c to use dev_err instead of DSSERR so that it
doesn't depend on DSSERR.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

omapdss_is_initialized() is used to find out if omapdss has been probed
successfully. This patch moves the related code to the common
omapdss-base module, so that the same support will be there for both
omapdss and omapdss6.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We are working towards enabling omapdss6, which will consists of a new
dss, dispc and dpi drivers. omapdss6 will be a new module. The panel,
encoder and omapdrm will need to use either the current omapdss driver
or the new omapdss6 driver, depending on the platform.

This will be implemented with a common base module and function
pointers.

This patch adds a skeleton omapdss-base.ko module, to which we'll be
moving common dss functionality like registration of the panels.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

While implementing writeback support, odd behavior of WBDELAYCOUNT was
observed with the combination of WB capture and HDMI. The result of the
debugging was that the HDMI sync polarities are not set correctly.

The current code sets the sync polarities going from HDMI WP to DISPC
according to the video mode used, which seems to work normally fine, but
causes problems with WB as WB expects the syncs to be active-high.

This patch changes the HDMI sync polarities so that the DISPC always
gets active-high syncs from HDMI WP, and the HDMI core gets sync
polarities according to the used video mode.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Add support for render nodes in omap driver and allow required
ioctls to be accessible via render nodes.

This enables unprivileged clients to allocate resources like GEM buffers
for rendering their content into. Mode setting (KMS ioctls) is not
allowed using render nodes. These buffers are then shared with
a previleged process (e.g compositor) that has mode setting access.

An example of this use case is Android where the hardware composer is
the only master and has mode setting access. Every other client then
uses render node(e.g /dev/dri/renderD128 to allocate and use its buffers.
Signed-off-by: Hemant Hariyani <hemanthariyani@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

The clock source selection for the LCD outputs is too hardcoded at the
moment. For example, LCD3 is set to use PLL2_1, and PLL2 doesn't exist
on DRA72x SoCs.

There are quite many ways to configure the clocks, even using HDMI PLL
for LCD outputs, but enabling full configuration of the clocks is rather
tricky.

This patch improves the situation a bit by checking if the PLL about to
be used exists, and if not, tries another one.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

mode_config's min_width and min_height are both set to 32, which is
overly restrictive.

The real limits depend on whether we're configuring a crtc or a plane,
but a limit of 8x2 is safe for both cases.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

The driver only uses even dividers for hsdiv when pclk >= 100MHz, as odd
dividers can create uneven duty cycle. However, while this holds true
for some dividers like DISPC's LCK and PCK dividers, it is not actually
true for hsdiv.

hsdiv always produces even duty cycle, so the constraint can be removed.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

The current driver doesn't expose any of the CRTC HW properties like
background color or transparency key, and sets them at CRTC enable time.

Refactor this into a separate function and call that function from
omap_crtc_atomic_flush(). This is the behavior we want when the
properties can be configured, so this patch makes it easier to add
patches later which implement those properties.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

DRA7 errata i886 (FPDLink PLL Unlocks With Certain SoC PLL M/N Values)
says that FPDLink is sensitive to jitter on the vout clock, and that low
PLL M and N values result in more jitter than high M and N values.

This patch implements a workaround for the problem by changing the PLL
setup to search for clocks starting from high M and N values, instead of
low values. This should not cause any functional change, and only
reduces the jitter.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm-misc for 4.12:

Core:
- Removed some fb subsampling dimension checks from core (Ville)
- Some MST slot cleanup (Dhinakaran)
- Extracted drm_debugfs.h & drm_ioctl.h from drmP.h (Daniel)
- Added drm_atomic_helper_shutdown() to compliment suspend/resume counterparts
  (Daniel)
- Pipe context through legacy modeset to remove legacy_backoff nasties (Daniel)
- Cleanups around vblank as well as allowing lockless counter reads (Chris W.)
- VGA Switcheroo added to MAINTAINERS with Lukas Wunner as reviewer (Lukas)

Drivers:
- Enhancements to rockchip driver probe (Jeffy) and dsi (Chris Z.)
- Thunderbolt external GPU awareness added (Lukas)

* tag 'drm-misc-next-2017-03-31' of git://anongit.freedesktop.org/git/drm-misc: (63 commits)
  apple-gmux: Don't switch external DP port on 2011+ MacBook Pros
  drm/nouveau: Don't register Thunderbolt eGPU with vga_switcheroo
  drm/amdgpu: Don't register Thunderbolt eGPU with vga_switcheroo
  drm/radeon: Don't register Thunderbolt eGPU with vga_switcheroo
  PCI: Recognize Thunderbolt devices
  MAINTAINERS: Add Lukas Wunner as reviewer for vga_switcheroo
  drm: Fix locking gotcha in page_flip ioctl
  drm: Clarify the role of plane_state argument to drm_simple update().
  drm: Clear e after kfree in drm_mode_page_flip_ioctl
  drm: Convert cmpxchg(bool) back to a two step operation
  drm/bridge: ti-tfp410: support hpd via gpio
  drm: use .hword to represent 16-bit numbers
  Revert unrelated part of "drm: simplify the locking in the GETCRTC ioctl"
  drm: Fixup failure paths in drm_atomic_helper_set_config
  drm: Peek at the current counter/timestamp for vblank queries
  drm: Refactor vblank sequence number comparison
  drm: vblank cannot be enabled if dev->irq_enabled is false
  drm: Mark up accesses of vblank->enabled outside of its spinlock
  drm: Make the decision to keep vblank irq enabled earlier
  drm/atomic-helper: Remove the backoff hack from set_config
  ...

This series enables atomic mode set for vmwgfx.  A number of features and
larger fixes are also included.

* 'drm-vmwgfx-next' of git://people.freedesktop.org/~syeh/repos_linux: (22 commits)
  drm/vmwgfx: Properly check display/scanout surface size
  drm/vmwgfx: Support topology greater than texture size
  drm/vmwgfx: Define an overlaid handle_close ioctl.
  drm/vmwgfx: Re-implement the stream resource as a simple resource.
  drm/vmwgfx: Introduce a simple resource type
  drm/vmwgfx: Revert "drm/vmwgfx: Replace numeric parameter like 0444 with macro"
  drm/vmwgfx: Fix LDU X blank screen until mode change issue
  drm/vmwgfx: Skipping fbdev fb pinning for ldu
  drm/vmwgfx: Explicityly track screen target width and height
  drm/vmwgfx: Turn on DRIVER_ATOMIC flag
  drm/vmwgfx: Switch over to internal atomic API for SOU and LDU
  drm/vmwgfx: Switch over to internal atomic API for STDU
  drm/vmwgfx: Fixes to vmwgfx_fb
  drm/vmwgfx: Add and connect atomic state object check/commit
  drm/vmwgfx: Add and connect connector helper function
  drm/vmwgfx: Add and connect plane helper functions
  drm/vmwgfx: Add and connect CRTC helper functions
  drm/vmwgfx: Connector atomic state
  drm/vmwgfx: Plane atomic state
  drm/vmwgfx: CRTC atomic state
  ...

The scanout surface size is the smaller of max texture size and
max STDU size.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>

Most of the display servers today use a single surface to represent the
entire desktop even if it's stretched across multiple screens.

For vmwgfx with STDU, the maximum surface size is limited to the
maximum texture size on the host.  On a 2D VM, this limits our
ability to support configurations with more than one 4K monitor.

To get past this limitation, we will now allow using a large DMA buf
as the framebuffer, and take care of blitting contents from this DMA buf
to the display buffer.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>

Instead of providing an ioctl for each handle type, provide a single
handle_close ioctl, and reuse the UNREF_DMABUF ioctl.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>

Provide and document a reference implementation.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>

The callbacks we need to provide to many resources are very similar, so
provide a simple resource type with a number of helpers for these
callbacks.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>

This reverts commit 2d8e60e8 ("drm/vmwgfx: Replace numeric
parameter like 0444 with macro")

The commit belongs to the series of 1285 patches sent to LKML on
2016-08-02, it changes the representation of file permissions from the
octal value "0600" to "S_IRUSR | S_IWUSR".

The general consensus was that the changes does not increase
readability, quite the opposite; 0600 is easier to parse mentally than
S_IRUSR | S_IWUSR.

It also causes argument inconsistency, due to commit 04319d89
("drm/vmwgfx: Add an option to change assumed FB bpp") that added
another call to module_param_named() where the permissions are written
as 0600.
Signed-off-by: Øyvind A. Holm <sunny@sunbase.org>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>

vmw_ldu_crtc_helper_commit() is not called if
drm_atomic_crtc_needs_modeset() decides nothing related to CRTC timing has
changed.

So a better place for this code is in vmw_ldu_primary_plane_atomic_update()
since we will need to update ld->fb every time the FB is updated.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>

Pinning fbdev's FB at the start of VRAM prevents X from pinning
its FB.  Since for ldu, the fb would be pinned anyway during a
mode set, just skip pinning it in fbdev.

This is not the best solution, but since ldu is not used much
anymore, it seems like a reasonable workaround.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>

We can no longer make the assumption that vmw_stdu_update_st() will
be called when there's a valid display surface attached.  So
instead of using display_srf for width and height, make a record of
these paremeters when the screen target is first defined.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>

Now that the legacy path has been tested, turn on the
DRIVER_ATOMIC flag so user mode driver can start going through
the Atomic path.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>

Switch over to internal atomic API.  This completes the atomic
internal atomic switch for all the Display Units.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>

Switch over to using internal atomic API for mode set.

This removes the legacy set_config API, replacing it with
drm_atomic_helper_set_config().  The DRM helper will use various
vmwgfx-specific atomic functions to set a mode.

DRIVER_ATOMIC capability flag is not yet set, so the user mode
will still use the legacy mode set IOCTL.

v2:
* Avoid a clash between page-flip pinning and setcrtc pinning, modify
the page-flip code to use the page-flip helper and the atomic callbacks.
To enable this, we will need to add a wrapper around atomic_commit.

* Add vmw_kms_set_config() to work around vmwgfx xorg driver bug
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>

1.  When unsetting a mode, num_connector should be set to zero
2.  The pixel_format field needs to be initialized as newer DRM internal
    functions checks this field
3.  Take the drm_modeset_lock_all() because vmw_fb_kms_detach() can
    change current mode
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>

This connects the main state object check and commit function.

v2
* Use drm_atomic_helper_commit() rather than a vmwgfx-specific one
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>

These helpers won't be called until we flip on the atomic support
flag or set drm_crtc_funcs->set_config to using the atomic
helper.

v2
Use drm_atomic_helper_best_encoder() rather than a vmwgfx-specific one
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>

Refactor previous FB and cursor plane update code into their
atomic counterparts: check, update, prepare, cleanup, and disable.

These helpers won't be called until we flip on the atomic support
flag or set drm_crtc_funcs->set_config to using the atomic
helper.

v2:
* Removed unnecessary pinning of cursor surface
* Added a few function headers

v3:
* Set clip region equal to the destination region
* Fixed surface pinning policy
* Enable SVGA mode in vmw_sou_primary_plane_prepare_fb
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>

Atomic mode set requires us to refactor existing vmw_stdu_crtc_set_config
code into sections that check the validity of the new mode, and sections
that actually program the hardware state.

vmw_du_crtc_atomic_check() takes CRTC-related checking code.  In a later
patch, vmw_du_primary_plane_atomic_check() will take framebuffer-related
checking code.

These helpers won't be called until we flip on the atomic support
flag or set drm_crtc_funcs->set_config to using the atomic
helper.

v2:
* The state->num_connector is actually the total number of potential
  connectors, not just the one associated with the display unit.
  The proper one to check is ->connector_mask.

* Add the check to only allow plane state to be the same as crtc state
  (Thanks to mlankhorst)

* Make sure to turn on SVGA mode before using VRAM.  SVGA mode is
  disabled in master_drop if dbdev is not running.

v3:
* Moved dot clock override to crtc_atomic_check
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>

Add connector handling functions. Start tracking is_implicity in
the connector state.  Eventually, this field should be tracked
exclusively in a connector state.

Now that plane and connector states have been created, we can also
activate the code that use CRTC state.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>

Add plane state handling functions.

We have to keep track of a few plane states so we cannot use the
DRM helper for this.

Created vmw_plane_state along with functions to reset, duplicate,
and destroty it.

v2
* Removed cursor clean up special case
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>

Create and Add CRTC state.  We currently do not track any properties
or custom states so we can technically use the DRM helpers.  Creating
this code just to make potential future additions easier.

Most of the new code will be compiled but not enabled until
plane/connector state handling code is also in place.

This is the first of a series to enable atomic mode set for vmwgfx.

The atomic enabling effort was done in collaboration with Thomas
Hellstrom and the VMware Graphics Team.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>

Universal support is prerequisite for atomic mode set.

Explicitly create planes for the cursor and the primary FB.  With
a functional cursor plane, the DRM will no longer use the legacy
cursor_set2 and cursor_move entry points.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>

This field is not being used anymore
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>

New stuff for 4.12:
- Preliminary vega10 support
- Support for multi-level page tables
- GPU sensor stuff for mesa
- job tracing improvements
- PRT support for sparse buffers
- Additional SR-IOV improvements
- ttm improvements
- misc bug fixes and code cleanups

* 'drm-next-4.12' of git://people.freedesktop.org/~agd5f/linux: (315 commits)
  drm/amdgpu: Fix 32bit x86 compilation warning
  drm/amdgpu: just disallow reading untouched registers
  drm/amdgpu: remove duplicate allowed reg CP_CPF_BUSY_STAT
  drm/amdgpu/soc15: enable psp block for SRIOV
  drm/amdgpu/soc15: bypass pp block for vf
  drm/amdgpu/psp: add check sOS sign
  drm/amd/amdgpu: Correct ring wptr address in debugfs (v2)
  drm/amdgpu: Fix multi-level page table bugs for large BOs v3
  drm/amdgpu: Fix Vega10 VM initialization
  drm/amdgpu: Make max_pfn 64-bit
  drm/amdgpu: drop GB_GPU_ID from the golden settings
  drm/amdgpu: fix vm pte pde flags to 64-bit for sdma (v3)
  drm/amd/amdgpu: fix Tonga S3 resume hang on rhel6.8
  drm/ttm: decrease ttm bo priority number
  drm/amd/amdgpu: fix performance drop when VRAM pressure
  drm/amdgpu: Couple small warning fixes
  drm/amdgpu: Clean up GFX 9 VM fault messages
  drm/amdgpu: Register UTCL2 as a source of VM faults
  drm/amdgpu/soc15: drop support for reading some registers
  drm/amdgpu/soc15: return cached values for some registers (v2)
  ...

On MacBook Pros introduced 2011 and onward, external DP ports are
combined DP/Thunderbolt ports that are no longer fully switchable
between GPUs, they can only be driven by the discrete GPU.

More specifically, the Main Link pins (which transport the actual video
and audio streams) are soldered to the discrete GPU, whereas the AUX
Channel pins are switchable. Because the integrated GPU is missing the
Main Link, external displays appear to it as phantoms which fail to
link-train.

Force the AUX channel to the discrete GPU on these models to avoid any
confusion. Document the switching policy implemented by this commit.
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: http://patchwork.freedesktop.org/patch/msgid/4d1fcc92d1960049e2cff997fbd2d74e45e84e49.1489145162.git.lukas@wunner.de

An external Thunderbolt GPU can neither drive the laptop's panel nor be
powered off by the platform, so there's no point in registering it with
vga_switcheroo.  In fact, when the external GPU is runtime suspended,
vga_switcheroo will cut power to the internal discrete GPU, resulting in
a lockup.

Cc: Ben Skeggs <bskeggs@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: http://patchwork.freedesktop.org/patch/msgid/8e733152b13e7c14501ad5af45c1c5c736584111.1489145162.git.lukas@wunner.de

An external Thunderbolt GPU can neither drive the laptop's panel nor be
powered off by the platform, so there's no point in registering it with
vga_switcheroo.  In fact, when the external GPU is runtime suspended,
vga_switcheroo will cut power to the internal discrete GPU, resulting in
a lockup.  Moreover AMD's Windows driver special-cases Thunderbolt as
well.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: http://patchwork.freedesktop.org/patch/msgid/701a8e89ce8ac39734736ab779558b6a4042a19e.1489145162.git.lukas@wunner.de

An external Thunderbolt GPU can neither drive the laptop's panel nor be
powered off by the platform, so there's no point in registering it with
vga_switcheroo.  In fact, when the external GPU is runtime suspended,
vga_switcheroo will cut power to the internal discrete GPU, resulting in
a lockup.  Moreover AMD's Windows driver special-cases Thunderbolt as
well.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: http://patchwork.freedesktop.org/patch/msgid/72d8a9645aece3eff44e116303f0fec8be061c88.1489145162.git.lukas@wunner.de