- 23 Oct, 2023 2 commits
-
-
Mrinmay Sarkar authored
Add support for dual lane end point mode PHY found on sa8755p platform. Signed-off-by:
Mrinmay Sarkar <quic_msarkar@quicinc.com> Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/1697715430-30820-4-git-send-email-quic_msarkar@quicinc.comSigned-off-by:
Vinod Koul <vkoul@kernel.org>
-
Sergio Paracuellos authored
Convert the ralink-usb-phy bindings to DT schema. Signed-off-by:
Sergio Paracuellos <sergio.paracuellos@gmail.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231022163006.803800-1-sergio.paracuellos@gmail.comSigned-off-by:
-
- 13 Oct, 2023 12 commits
-
-
Duje Mihanović authored
Convert the binding for the Marvell PXA1928 USB and HSIC PHYs from TXT to DT schema. Signed-off-by:
Duje Mihanović <duje.mihanovic@skole.hr> Reviewed-by:
-
Rob Herring authored
If probe is reached, we've already matched the device and in the case of DT matching, the struct device_node pointer will be set. Therefore, there is no need to call of_match_device() in probe. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20231009172923.2457844-16-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
Neither of_address.h or of_platform.h are used in the driver, so drop them. Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20231009172923.2457844-17-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
Use preferred device_get_match_data() instead of of_match_device() to get the driver match data. With this, adjust the includes to explicitly include the correct headers. Signed-off-by:
-
Rob Herring authored
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other and pull in various other headers. In preparation to fix this, adjust the includes for what is actually needed. of_device.h isn't needed, but platform_device.h was implicitly included by it. Signed-off-by:
-
Yoshihiro Shimoda authored
Add r8a779f0_eth_serdes_exit() to clear the initialized flag for re-initializing this PHY if needed. Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20231011081817.257113-3-yoshihiro.shimoda.uh@renesas.comSigned-off-by:
-
Yoshihiro Shimoda authored
Reset this PHY in .init() instead of probe() for re-initializing this PHY after probed correctly. Signed-off-by:
-
Dmitry Baryshkov authored
Make sure that we use only v6 registers in qmp_v6_usb3phy_regs_layout. Signed-off-by:
-
Dmitry Baryshkov authored
The commit 39bbf82d ("phy: qcom-qmp: pcs-usb: Add v6 register offsets") incorrectly added plain PCS registers to the PCS_USB header. Move them to a proper location. Signed-off-by:
-
Dmitry Baryshkov authored
For all other generations, we have been using just the QPHY prefix for the PCS registers. Remove the _USB part of the QPHY_USB prefix. Signed-off-by:
-
Christophe JAILLET authored
With gcc 12.3.0, when this file is built, we get errors such as: drivers/phy/allwinner/phy-sun4i-usb.c: In function ‘sun4i_usb_phy_probe’: drivers/phy/allwinner/phy-sun4i-usb.c:790:52: error: ‘_vbus’ directive output may be truncated writing 5 bytes into a region of size between 2 and 12 [-Werror=format-truncation=] 790 | snprintf(name, sizeof(name), "usb%d_vbus", i); | ^~~~~ drivers/phy/allwinner/phy-sun4i-usb.c:790:17: note: ‘snprintf’ output between 10 and 20 bytes into a destination of size 16 790 | snprintf(name, sizeof(name), "usb%d_vbus", i); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Because of the possible value of 'i', this can't be an issue in real world application, but in order to have "make W=1" work correctly, give more space for 'name'. Signed-off-by:Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/0bc81612171baaa6d5dff58c8e009debc03e1ba8.1693735840.git.christophe.jaillet@wanadoo.fr [vkoul: updated patch title] Signed-off-by:
-
Vinod Koul authored
Merge fixes into next as qmp phy patches on list depend on it
-
- 29 Sep, 2023 1 commit
-
-
Geert Uytterhoeven authored
The Realtek SoC USB2 and USB3 PHY Transceivers are only present on Realtek Digital Home Center (DHC) RTD series SoCs. Hence add a dependency on ARCH_REALTEK, to prevent asking the user about these drivers when configuring a kernel without Realtek SoC support. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/2892527cac9af6fa8f5e7b8daeffd7d4351fde68.1692113167.git.geert+renesas@glider.beSigned-off-by:
-
- 21 Sep, 2023 25 commits
-
-
Konrad Dybcio authored
There are devices in the wild, like the Sony Xperia 1 V that *require* different tuning than the base design for USB to work. Add support for overriding the necessary tuning values. Signed-off-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230830-topic-eusb2_override-v2-4-7d8c893d93f6@linaro.orgSigned-off-by:
-
Konrad Dybcio authored
The vendor kernel zeroes out all tuning data outside the init sequence as part of initialization. Follow suit to avoid UB. Signed-off-by:
-
Konrad Dybcio authored
Switch to regmap_fields, so that the values written into registers are sanitized by their explicit sizes and the different registers are structured in an iterable object to make external changes to the init sequence simpler. Signed-off-by:
-
Konrad Dybcio authored
The EUSB2 repeater requires some alterations to its init sequence, depending on board design. Add support for making the necessary changes to that sequence to make USB functional on SM8550-based Xperia 1 V. They all have lackluster description due to lack of information. Signed-off-by:
-
Shuijing Li authored
Add dt-binding documentation of dsi-phy for MediaTek MT8188 SoC. Signed-off-by:
Shuijing Li <shuijing.li@mediatek.com> Acked-by:
Conor Dooley <conor.dooley@microchip.com> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230908075310.17825-1-shuijing.li@mediatek.comSigned-off-by:
-
Nitheesh Sekar authored
Add phy init sequence and compatible string for IPQ5018 chipset. Signed-off-by:
Nitheesh Sekar <quic_nsekar@quicinc.com> Link: https://lore.kernel.org/r/20230904063635.24975-3-quic_nsekar@quicinc.comSigned-off-by:
-
Nitheesh Sekar authored
IPQ5332 qcom,m31 phy driver can support IPQ5018. Reviewed-by:
-
Raphael Gallais-Pou authored
Convert the st,stih407-usb2-phy binding to DT schema format. Signed-off-by:
Raphael Gallais-Pou <rgallaispou@gmail.com> Reviewed-by:
-
Bo Liu authored
Fix typo in the description of the 'succesfully'. Signed-off-by:
Bo Liu <liubo03@inspur.com> Reviewed-by:
-
Konrad Dybcio authored
Currently, PCS_USB registers that have their initialization data in a pcs_usb_tbl table are never initialized. Fix that. Fixes: fc646236 ("phy: qcom-qmp-combo,usb: add support for separate PCS_USB region") Reported-by:
Adrien Thierry <athierry@redhat.com> Reviewed-by:
-
Konrad Dybcio authored
There are two instances of the POWER_STATE_CONFIG1 register: one in the PCS space and another one in PCS_USB. The downstream init sequence pokes the latter one while we've been poking the former one (and misnamed it as the latter one, impostor!). Fix that up to avoid UB. Fixes: 49742e9e ("phy: qcom-qmp-combo: Add support for SM8550") Reviewed-by:
Abel Vesa <abel.vesa@linaro.org> Reviewed-by:
-
Varadarajan Narayanan authored
Fix the following Smatch complaint: drivers/phy/qualcomm/phy-qcom-m31.c:175 m31usb_phy_init() warn: variable dereferenced before check 'qphy->vreg' (see line 167) drivers/phy/qualcomm/phy-qcom-m31.c 166 167 ret = regulator_enable(qphy->vreg); ^^^^^^^^^^ Unchecked dereference 168 if (ret) { 169 dev_err(&phy->dev, "failed to enable regulator, %d\n", ret); 170 return ret; 171 } 172 173 ret = clk_prepare_enable(qphy->clk); 174 if (ret) { 175 if (qphy->vreg) ^^^^^^^^^^ Checked too late 176 regulator_disable(qphy->vreg); 177 dev_err(&phy->dev, "failed to enable cfg ahb clock, %d\n", ret); Since the phy will not get registered if qphy->vreg is NULL, this check is not needed. Reported-by:Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/linux-phy/cbd26132-c624-44b7-a073-73222b287338@moroto.mountain/T/#u Fixes: 08e49af5 ("phy: qcom: Introduce M31 USB PHY driver") Signed-off-by:
Varadarajan Narayanan <quic_varada@quicinc.com> Link: https://lore.kernel.org/r/1694069452-3794-1-git-send-email-quic_varada@quicinc.comSigned-off-by:
-
Jinjie Ruan authored
Both debugfs_create_dir() and debugfs_create_file() return ERR_PTR and never return NULL. As Greg suggested, this patch removes the error checking for debugfs_create_dir in phy-rtk-usb2.c and phy-rtk-usb3.c. This is because the DebugFS kernel API is developed in a way that the caller can safely ignore the errors that occur during the creation of DebugFS nodes. The debugfs APIs have a IS_ERR() judge in start_creating() which can handle it gracefully. So these checks are unnecessary. Fixes: 134e6d25 ("phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY") Fixes: adda6e82 ("phy: realtek: usb: Add driver for the Realtek SoC USB 3.0 PHY") Signed-off-by:
Jinjie Ruan <ruanjinjie@huawei.com> Suggested-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
-
Yang Yingliang authored
m31_ipq5332_regs is only used in phy-qcom-m31.c now, change it to static. Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Reviewed-by:
-
Yang Yingliang authored
It should be 'qphy->vreg' passed to PTR_ERR() when devm_regulator_get() fails. Fixes: 08e49af5 ("phy: qcom: Introduce M31 USB PHY driver") Signed-off-by:
-
Dmitry Baryshkov authored
Fix the 'reg is too long' warning caused by me adding 64-bit address and size to the example, while default being 32-bit (cell size equal to 1). Reported-by:
Rob Herring <robh+dt@kernel.org> Fixes: 505fb254 ("dt-bindings: phy: migrate QMP PCIe PHY bindings to qcom,sc8280xp-qmp-pcie-phy.yaml") Signed-off-by:
-
Dmitry Baryshkov authored
Populate offsets configuration for the rest of USB PHYs to make it possible to switch them to the new (single-node) bindings style. Signed-off-by:
-
Dmitry Baryshkov authored
Move PCS MISC V4 registers to the separate header. Signed-off-by:
-
Dmitry Baryshkov authored
The register QPHY_V[34]_PCS_MISC_CLAMP_ENABLE is present only on some SoC families. Other platforms (qcm2290) can have PCS_MISC region, but do not have this register. Add it to the register layout table and check that it is defined before toggling CLAMP settings. Signed-off-by:
-
Dmitry Baryshkov authored
All legacy bindings of USB PHYs use "phy", "common" resets, while newer style bindings use "phy", "phy_phy" resets. In preparation for converting existing legacy PHY bindings to use newer scheme, drop reset lists from configuration struture and reference reset lists directly. Signed-off-by:
-
Dmitry Baryshkov authored
For the existing PHYs for new binding we are going to drop ref_clk_src clock and always use ref clock. Rather than introducing additional code to handle legacy vs current bindings (and clock names), use devm_clk_bulk_get_optional() when new bindings are used and devm_clk_bulk_get_all() when legacy bindings are in place. Signed-off-by:
-
Dmitry Baryshkov authored
Migrate legacy bindings (described in qcom,msm8996-qmp-usb3-phy.yaml) to qcom,sc8280xp-qmp-usb3-uni-phy.yaml. This removes a need to declare the child PHY node or split resource regions. Signed-off-by:
-
Adrien Thierry authored
For sc8280xp and sa8775p, PCS and PCS_USB initialization data is described in the same table, thus the pcs_usb offset is not being applied during initialization of PCS_USB registers. Fix this by adding the appropriate pcs_usb_tbl tables. Fixes: 8bd2d6e1 ("phy: qcom-qmp: Add SA8775P USB3 UNI phy") Fixes: c0c7769c ("phy: qcom-qmp: Add SC8280XP USB3 UNI phy") Reviewed-by:
-
Adrien Thierry authored
Currently, PCS_USB registers that have their initialization data in a pcs_usb_tbl table are never initialized. Fix that. Fixes: fc646236 ("phy: qcom-qmp-combo,usb: add support for separate PCS_USB region") Signed-off-by:
-
Nitin Rawat authored
Add SC7280 specific register layout and table configs. Co-developed-by:
Manish Pandey <quic_mapa@quicinc.com> Signed-off-by:
Nitin Rawat <quic_nitirawa@quicinc.com> Reviewed-by:
-
