- 26 Mar, 2015 19 commits
-
-
Steven Barth authored
[ Upstream commit 73ba57bf ] for throw routes to trigger evaluation of other policy rules EAGAIN needs to be propagated up to fib_rules_lookup similar to how its done for IPv4 A simple testcase for verification is: ip -6 rule add lookup 33333 priority 33333 ip -6 route add throw 2001:db8::1 ip -6 route add 2001:db8::1 via fe80::1 dev wlan0 table 33333 ip route get 2001:db8::1 Signed-off-by:
Steven Barth <cyrus@openwrt.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sabrina Dubroca authored
[ Upstream commit 8e199dfd ] Matt Grant reported frequent crashes in ipv6_select_ident when udp6_ufo_fragment is called from openvswitch on a skb that doesn't have a dst_entry set. ipv6_proxy_select_ident generates the frag_id without using the dst associated with the skb. This approach was suggested by Vladislav Yasevich. Fixes: 0508c07f ("ipv6: Select fragment id during UFO segmentation if not set.") Cc: Vladislav Yasevich <vyasevic@redhat.com> Reported-by:
Matt Grant <matt@mattgrant.net.nz> Tested-by:
Sabrina Dubroca <sd@queasysnail.net> Acked-by:
Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by:
-
Ondrej Zary authored
[ Upstream commit 8d006e01 ] This reverts commit 11ad714b because it breaks cx82310_eth. The custom USB_DEVICE_CLASS macro matches bDeviceClass, bDeviceSubClass and bDeviceProtocol but the common USB_DEVICE_AND_INTERFACE_INFO matches bInterfaceClass, bInterfaceSubClass and bInterfaceProtocol instead, which are not specified. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Signed-off-by:
-
Eran Ben Elisha authored
[ Upstream commit a16f3565 ] NUM_PORT_STATS was 9 instead of 10, which caused off-by-one bug when displaying the statistics starting from tx_chksum_offload in ethtool. Fixes: f8c6455b ('net/mlx4_en: Extend checksum offloading by CHECKSUM COMPLETE') Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Al Viro authored
[ Upstream commit 7d985ed1 ] [I would really like an ACK on that one from dhowells; it appears to be quite straightforward, but...] MSG_PEEK isn't passed to ->recvmsg() via msg->msg_flags; as the matter of fact, neither the kernel users of rxrpc, nor the syscalls ever set that bit in there. It gets passed via flags; in fact, another such check in the same function is done correctly - as flags & MSG_PEEK. It had been that way (effectively disabled) for 8 years, though, so the patch needs beating up - that case had never been tested. If it is correct, it's -stable fodder. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Al Viro authored
[ Upstream commit 3eeff778 ] It should be checking flags, not msg->msg_flags. It's ->sendmsg() instances that need to look for that in ->msg_flags, ->recvmsg() ones (including the other ->recvmsg() instance in that file, as well as unix_dgram_recvmsg() this one claims to be imitating) check in flags. Braino had been introduced in commit dcda13 ("caif: Bugfix - use MSG_TRUNC in receive") back in 2010, so it goes quite a while back. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit c8e2c80d ] inet_diag_dump_one_icsk() allocates too small skb. Add inet_sk_attr_size() helper right before inet_sk_diag_fill() so that it can be updated if/when new attributes are added. iproute2/ss currently does not use this dump_one() interface, this might explain nobody noticed this problem yet. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Jason Wang authored
[ Upstream commit ab3971b1 ] We don't delete napi from hash list during module exit. This will cause the following panic when doing module load and unload: BUG: unable to handle kernel paging request at 0000004e00000075 IP: [<ffffffff816bd01b>] napi_hash_add+0x6b/0xf0 PGD 3c5d5067 PUD 0 Oops: 0000 [#1] SMP ... Call Trace: [<ffffffffa0a5bfb7>] init_vqs+0x107/0x490 [virtio_net] [<ffffffffa0a5c9f2>] virtnet_probe+0x562/0x791815639d880be [virtio_net] [<ffffffff8139e667>] virtio_dev_probe+0x137/0x200 [<ffffffff814c7f2a>] driver_probe_device+0x7a/0x250 [<ffffffff814c81d3>] __driver_attach+0x93/0xa0 [<ffffffff814c8140>] ? __device_attach+0x40/0x40 [<ffffffff814c6053>] bus_for_each_dev+0x63/0xa0 [<ffffffff814c7a79>] driver_attach+0x19/0x20 [<ffffffff814c76f0>] bus_add_driver+0x170/0x220 [<ffffffffa0a60000>] ? 0xffffffffa0a60000 [<ffffffff814c894f>] driver_register+0x5f/0xf0 [<ffffffff8139e41b>] register_virtio_driver+0x1b/0x30 [<ffffffffa0a60010>] virtio_net_driver_init+0x10/0x12 [virtio_net] This patch fixes this by doing this in virtnet_free_queues(). And also don't delete napi in virtnet_freeze() since it will call virtnet_free_queues() which has already did this. Fixes 91815639 ("virtio-net: rx busy polling support") Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Reviewed-by:
-
Arnd Bergmann authored
[ Upstream commit f862e07c ] The rds_iw_update_cm_id function stores a large 'struct rds_sock' object on the stack in order to pass a pair of addresses. This happens to just fit withint the 1024 byte stack size warning limit on x86, but just exceed that limit on ARM, which gives us this warning: net/rds/iw_rdma.c:200:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] As the use of this large variable is basically bogus, we can rearrange the code to not do that. Instead of passing an rds socket into rds_iw_get_device, we now just pass the two addresses that we have available in rds_iw_update_cm_id, and we change rds_iw_get_mr accordingly, to create two address structures on the stack there. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by:
-
Alexey Kodanev authored
[ Upstream commit b1cb59cf ] sysctl has sysctl.net.core.rmem_*/wmem_* parameters which can be set to incorrect values. Given that 'struct sk_buff' allocates from rcvbuf, incorrectly set buffer length could result to memory allocation failures. For example, set them as follows: # sysctl net.core.rmem_default=64 net.core.wmem_default = 64 # sysctl net.core.wmem_default=64 net.core.wmem_default = 64 # ping localhost -s 1024 -i 0 > /dev/null This could result to the following failure: skbuff: skb_over_panic: text:ffffffff81628db4 len:-32 put:-32 head:ffff88003a1cc200 data:ffff88003a1cc200 tail:0xffffffe0 end:0xc0 dev:<NULL> kernel BUG at net/core/skbuff.c:102! invalid opcode: 0000 [#1] SMP ... task: ffff88003b7f5550 ti: ffff88003ae88000 task.ti: ffff88003ae88000 RIP: 0010:[<ffffffff8155fbd1>] [<ffffffff8155fbd1>] skb_put+0xa1/0xb0 RSP: 0018:ffff88003ae8bc68 EFLAGS: 00010296 RAX: 000000000000008d RBX: 00000000ffffffe0 RCX: 0000000000000000 RDX: ffff88003fdcf598 RSI: ffff88003fdcd9c8 RDI: ffff88003fdcd9c8 RBP: ffff88003ae8bc88 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 00000000000002b2 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88003d3f7300 R15: ffff88000012a900 FS: 00007fa0e2b4a840(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000d0f7e0 CR3: 000000003b8fb000 CR4: 00000000000006f0 Stack: ffff88003a1cc200 00000000ffffffe0 00000000000000c0 ffffffff818cab1d ffff88003ae8bd68 ffffffff81628db4 ffff88003ae8bd48 ffff88003b7f5550 ffff880031a09408 ffff88003b7f5550 ffff88000012aa48 ffff88000012ab00 Call Trace: [<ffffffff81628db4>] unix_stream_sendmsg+0x2c4/0x470 [<ffffffff81556f56>] sock_write_iter+0x146/0x160 [<ffffffff811d9612>] new_sync_write+0x92/0xd0 [<ffffffff811d9cd6>] vfs_write+0xd6/0x180 [<ffffffff811da499>] SyS_write+0x59/0xd0 [<ffffffff81651532>] system_call_fastpath+0x12/0x17 Code: 00 00 48 89 44 24 10 8b 87 c8 00 00 00 48 89 44 24 08 48 8b 87 d8 00 00 00 48 c7 c7 30 db 91 81 48 89 04 24 31 c0 e8 4f a8 0e 00 <0f> 0b eb fe 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 48 83 RIP [<ffffffff8155fbd1>] skb_put+0xa1/0xb0 RSP <ffff88003ae8bc68> Kernel panic - not syncing: Fatal exception Moreover, the possible minimum is 1, so we can get another kernel panic: ... BUG: unable to handle kernel paging request at ffff88013caee5c0 IP: [<ffffffff815604cf>] __alloc_skb+0x12f/0x1f0 ... Signed-off-by:
Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by:
-
Neal Cardwell authored
[ Upstream commit d578e18c ] Commit 814d488c ("tcp: fix the timid additive increase on stretch ACKs") fixed a bug where tcp_cong_avoid_ai() would either credit a connection with an increase of snd_cwnd_cnt, or increase snd_cwnd, but not both, resulting in cwnd increasing by 1 packet on at most every alternate invocation of tcp_cong_avoid_ai(). Although the commit correctly implemented the CUBIC algorithm, which can increase cwnd by as much as 1 packet per 1 packet ACKed (2x per RTT), in practice that could be too aggressive: in tests on network paths with small buffers, YouTube server retransmission rates nearly doubled. This commit restores CUBIC to a maximum cwnd growth rate of 1 packet per 2 packets ACKed (1.5x per RTT). In YouTube tests this restored retransmit rates to low levels. Testing: This patch has been tested in datacenter netperf transfers and live youtube.com and google.com servers. Fixes: 9cd981dc ("tcp: fix stretch ACK bugs in CUBIC") Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
Neal Cardwell authored
[ Upstream commit 9949afa4 ] The recent change to tcp_cong_avoid_ai() to handle stretch ACKs introduced a bug where snd_cwnd_cnt could accumulate a very large value while w was large, and then if w was reduced snd_cwnd could be incremented by a large delta, leading to a large burst and high packet loss. This was tickled when CUBIC's bictcp_update() sets "ca->cnt = 100 * cwnd". This bug crept in while preparing the upstream version of 814d488c. Testing: This patch has been tested in datacenter netperf transfers and live youtube.com and google.com servers. Fixes: 814d488c ("tcp: fix the timid additive increase on stretch ACKs") Signed-off-by:
-
Nimrod Andy authored
[ Upstream commit af5cbc98 ] The current driver support receive VLAN CTAG HW acceleration feature (NETIF_F_HW_VLAN_CTAG_RX) through software simulation. There calls the api .skb_copy_to_linear_data_offset() to skip the VLAN tag, but there have overlap between the two memory data point range. The patch just fix the issue. V2: Michael Grzeschik suggest to use memmove() instead of skb_copy_to_linear_data_offset(). Reported-by:
Michael Grzeschik <m.grzeschik@pengutronix.de> Fixes: 1b7bde6d ("net: fec: implement rx_copybreak to improve rx performance") Signed-off-by:
Fugang Duan <B38611@freescale.com> Signed-off-by:
-
WANG Cong authored
[ Upstream commit 5778d39d ] We dynamically allocate divisor+1 entries for ->ht[] in tc_u_hnode: ht = kzalloc(sizeof(*ht) + divisor*sizeof(void *), GFP_KERNEL); So ->ht is supposed to be the last field of this struct, however this is broken, since an rcu head is appended after it. Fixes: 1ce87720 ("net: sched: make cls_u32 lockless") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
-
David S. Miller authored
[ Upstream commit 2077cef4 ] Firstly, handle zero length calls properly. Believe it or not there are a few of these happening during early boot. Next, we can't just drop to a memcpy() call in the forward copy case where dst <= src. The reason is that the cache initializing stores used in the Niagara memcpy() implementations can end up clearing out cache lines before we've sourced their original contents completely. For example, considering NG4memcpy, the main unrolled loop begins like this: load src + 0x00 load src + 0x08 load src + 0x10 load src + 0x18 load src + 0x20 store dst + 0x00 Assume dst is 64 byte aligned and let's say that dst is src - 8 for this memcpy() call. That store at the end there is the one to the first line in the cache line, thus clearing the whole line, which thus clobbers "src + 0x28" before it even gets loaded. To avoid this, just fall through to a simple copy only mildly optimized for the case where src and dst are 8 byte aligned and the length is a multiple of 8 as well. We could get fancy and call GENmemcpy() but this is good enough for how this thing is actually used. Reported-by:
David Ahern <david.ahern@oracle.com> Reported-by:
Bob Picco <bpicco@meloft.net> Signed-off-by:
-
David Ahern authored
[ Upstream commit 31aaa98c ] With the increase in number of CPUs calls to functions that dump output to console (e.g., arch_trigger_all_cpu_backtrace) can take a long time to complete. If IRQs are disabled eventually the NMI watchdog kicks in and creates more havoc. Avoid by telling the NMI watchdog everything is ok. Signed-off-by:
-
David Ahern authored
[ Upstream commit d51291cb ] Currently perf-stat (aka, counting mode) does not work: $ perf stat ls ... Performance counter stats for 'ls': 1.585665 task-clock (msec) # 0.580 CPUs utilized 24 context-switches # 0.015 M/sec 0 cpu-migrations # 0.000 K/sec 86 page-faults # 0.054 M/sec <not supported> cycles <not supported> stalled-cycles-frontend <not supported> stalled-cycles-backend <not supported> instructions <not supported> branches <not supported> branch-misses 0.002735100 seconds time elapsed The reason is that state is never reset (stays with PERF_HES_UPTODATE set). Add a call to sparc_pmu_enable_event during the added_event handling. Clean up the encoding since pmu_start calls sparc_pmu_enable_event which does the same. Passing PERF_EF_RELOAD to sparc_pmu_start means the call to sparc_perf_event_set_period can be removed as well. With this patch: $ perf stat ls ... Performance counter stats for 'ls': 1.552890 task-clock (msec) # 0.552 CPUs utilized 24 context-switches # 0.015 M/sec 0 cpu-migrations # 0.000 K/sec 86 page-faults # 0.055 M/sec 5,748,997 cycles # 3.702 GHz <not supported> stalled-cycles-frontend:HG <not supported> stalled-cycles-backend:HG 1,684,362 instructions:HG # 0.29 insns per cycle 295,133 branches:HG # 190.054 M/sec 28,007 branch-misses:HG # 9.49% of all branches 0.002815665 seconds time elapsed Signed-off-by:
Bob Picco <bob.picco@oracle.com> Signed-off-by:
-
David Ahern authored
[ Upstream commit 5b0d4b55 ] perf_pmu_disable is called by core perf code before pmu->del and the enable function is called by core perf code afterwards. No need to call again within sparc_pmu_del. Ditto for pmu->add and sparc_pmu_add. Signed-off-by:
-
Rob Gardner authored
[ Upstream commit 53eb2516 ] A bug was reported that the semtimedop() system call was always failing eith ENOSYS. Since SEMCTL is defined as 3, and SEMTIMEDOP is defined as 4, the comparison "call <= SEMCTL" will always prevent SEMTIMEDOP from getting through to the semaphore ops switch statement. This is corrected by changing the comparison to "call <= SEMTIMEDOP". Orabug: 20633375 Signed-off-by:
Rob Gardner <rob.gardner@oracle.com> Signed-off-by:
-
- 18 Mar, 2015 21 commits
-
-
Greg Kroah-Hartman authored
-
Greg Kroah-Hartman authored
This reverts commit abc86d0f as it is broken in 3.19 and is easier to revert here than try to fix it. Reported-by: Florian Westphal <fw@strlen.de Reported-by:
David Miller <davem@redhat.com> Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
-
Ian Munsie authored
commit a6130ed2 upstream. We were missing a return statement in the PSL interrupt handler in the case of an AFU error, which would trigger an "Unhandled CXL PSL IRQ" warning. We do actually handle these type of errors (by notifying userspace), so add the missing return IRQ_HANDLED so we don't throw unecessary warnings. Signed-off-by:
Ian Munsie <imunsie@au1.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Ryan Grimm authored
commit 6f963ec2 upstream. When unbinding and rebinding the driver on a system with a card in PHB0, this error condition is reached after a few attempts: ERROR: Bad of_node_put() on /pciex@3fffe40000000 CPU: 0 PID: 3040 Comm: bash Not tainted 3.18.0-rc3-12545-g3627ffe #152 Call Trace: [c000000721acb5c0] [c00000000086ef94] .dump_stack+0x84/0xb0 (unreliable) [c000000721acb640] [c00000000073a0a8] .of_node_release+0xd8/0xe0 [c000000721acb6d0] [c00000000044bc44] .kobject_release+0x74/0xe0 [c000000721acb760] [c0000000007394fc] .of_node_put+0x1c/0x30 [c000000721acb7d0] [c000000000545cd8] .cxl_probe+0x1a98/0x1d50 [c000000721acb900] [c0000000004845a0] .local_pci_probe+0x40/0xc0 [c000000721acb980] [c000000000484998] .pci_device_probe+0x128/0x170 [c000000721acba30] [c00000000052400c] .driver_probe_device+0xac/0x2a0 [c000000721acbad0] [c000000000522468] .bind_store+0x108/0x160 [c000000721acbb70] [c000000000521448] .drv_attr_store+0x38/0x60 [c000000721acbbe0] [c000000000293840] .sysfs_kf_write+0x60/0xa0 [c000000721acbc50] [c000000000292500] .kernfs_fop_write+0x140/0x1d0 [c000000721acbcf0] [c000000000208648] .vfs_write+0xd8/0x260 [c000000721acbd90] [c000000000208b18] .SyS_write+0x58/0x100 [c000000721acbe30] [c000000000009258] syscall_exit+0x0/0x98 We are missing a call to of_node_get(). pnv_pci_to_phb_node() should call of_node_get() otherwise np's reference count isn't incremented and it might go away. Rename pnv_pci_to_phb_node() to pnv_pci_get_phb_node() so it's clear it calls of_node_get(). Signed-off-by:
Ryan Grimm <grimm@linux.vnet.ibm.com> Acked-by:
-
Ryan Grimm authored
commit 4beb5421 upstream. Select defaults such that a PERST causes flash image reload. Select which image based on what the card is set up to load. CXL_VSEC_PERST_LOADS_IMAGE selects whether PERST assertion causes flash image load. CXL_VSEC_PERST_SELECT_USER selects which image is loaded on the next PERST. cxl_update_image_control writes these bits into the VSEC. Signed-off-by:
-
Sergei Shtylyov authored
commit 2e9dcdae upstream. In case CLK_GATE_HIWORD_MASK flag is passed to clk_register_gate(), the bit # should be no higher than 15, however the corresponding check is obviously off- by-one. Fixes: 04577994 ("clk: gate: add CLK_GATE_HIWORD_MASK") Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
Michael Turquette <mturquette@linaro.org> Signed-off-by:
-
Peter Zijlstra authored
commit 1fe89e1b upstream. Because task_group() uses a cache of autogroup_task_group(), whose output depends on sched_class, switching classes can generate problems. In particular, when started as fair, the cache points to the autogroup, so when switching to RT the tg_rt_schedulable() test fails for every cpu.rt_{runtime,period}_us change because now the autogroup has tasks and no runtime. Furthermore, going back to the previous semantics of varying task_group() with sched_class has the down-side that the sched_debug output varies as well, even though the task really is in the autogroup. Therefore add an autogroup exception to tg_has_rt_tasks() -- such that both (all) task_group() usages in sched/core now have one. And remove all the remnants of the variable task_group() output. Reported-by:
Zefan Li <lizefan@huawei.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <umgwanakikbuti@gmail.com> Cc: Stefan Bader <stefan.bader@canonical.com> Fixes: 8323f26c ("sched: Fix race in task_group()") Link: http://lkml.kernel.org/r/20150209112237.GR5029@twins.programming.kicks-ass.netSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Michal Hocko authored
commit ba4877b9 upstream. Vinayak Menon has reported that an excessive number of tasks was throttled in the direct reclaim inside too_many_isolated() because NR_ISOLATED_FILE was relatively high compared to NR_INACTIVE_FILE. However it turned out that the real number of NR_ISOLATED_FILE was 0 and the per-cpu vm_stat_diff wasn't transferred into the global counter. vmstat_work which is responsible for the sync is defined as deferrable delayed work which means that the defined timeout doesn't wake up an idle CPU. A CPU might stay in an idle state for a long time and general effort is to keep such a CPU in this state as long as possible which might lead to all sorts of troubles for vmstat consumers as can be seen with the excessive direct reclaim throttling. This patch basically reverts 39bf6270 ("VM statistics: Make timer deferrable") but it shouldn't cause any problems for idle CPUs because only CPUs with an active per-cpu drift are woken up since 7cc36bbd ("vmstat: on-demand vmstat workers v8") and CPUs which are idle for a longer time shouldn't have per-cpu drift. Fixes: 39bf6270 (VM statistics: Make timer deferrable) Signed-off-by:
Michal Hocko <mhocko@suse.cz> Reported-by:
Vinayak Menon <vinmenon@codeaurora.org> Acked-by:
Christoph Lameter <cl@linux.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Uwe Kleine-König authored
commit 34027ca2 upstream. The pin id for a given tuple listed in a fsl,pins property is calculated by dividing the first entry (which is also a register offset) by 4. As the first available register is at offset 0x8 and configures the pad MX25_PAD_A10 the right id for this pin is 2. All other pins are off by one, too. This patch drops the definition MX25_PAD_RESERVE1 (together with its only use) and decrements all following values by 1. Fixes: b4a87c9b ("pinctrl: pinctrl-imx: add imx25 pinctrl driver") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Uwe Kleine-König authored
commit 4ff0f034 upstream. The right check for conf_reg to be invalid it testing against -1 not 0 as is done in the rest of the driver. This fixes an oops that can be triggered by: cat /sys/kernel/debug/pinctrl/43fac000.iomuxc/* Fixes: ae75ff81 ("pinctrl: pinctrl-imx: add imx pinctrl core driver") Signed-off-by:
-
Sergey Ryazanov authored
commit 8bfae4f9 upstream. Sometimes while CPU have some load and ath5k doing the wireless interface reset the whole WiSoC completely freezes. Set of tests shows that using atomic delay function while we wait interface reset helps to avoid such freezes. The easiest way to reproduce this issue: create a station interface, start continous scan with wpa_supplicant and load CPU by something. Or just create multiple station interfaces and put them all in continous scan. This patch partially reverts the commit 1846ac3d ("ath5k: Use usleep_range where possible"), which replaces initial udelay() by usleep_range(). I do not know actual source of this issue, but all looks like that HW freeze is caused by transaction on internal SoC bus, while wireless block is in reset state. Also I should note that I do not know how many chips are affected, but I did not see this issue with chips, other than AR5312. CC: Jiri Slaby <jirislaby@gmail.com> CC: Nick Kossifidis <mickflemm@gmail.com> CC: Luis R. Rodriguez <mcgrof@do-not-panic.com> Fixes: 1846ac3d ("ath5k: Use usleep_range where possible") Reported-by:
Christophe Prevotaux <c.prevotaux@rural-networks.com> Tested-by:
Eric Bree <ebree@nltinc.com> Signed-off-by:
Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Andrew Elble authored
commit 27870207 upstream. Fixes: e01580bf ("gfs2: use generic posix ACL infrastructure") Reported-by:
Eric Meddaugh <etmsys@rit.edu> Tested-by:
Andrew Elble <aweits@rit.edu> Signed-off-by:
Steven Whitehouse <swhiteho@redhat.com> Signed-off-by:
-
Lorenzo Pieralisi authored
commit d2be00c0 upstream. In the function of_pci_get_host_bridge_resources() if the parsing of ranges fails, previously allocated resources inclusive of bus_range are not freed and are not expected to be freed by the function caller on error return. This patch fixes the issues by adding code that properly frees resources and bus_range before exiting the function with an error return value. Fixes: cbe4097f ("of/pci: Add support for parsing PCI host bridge resources from DT") Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Liviu Dudau <liviu.dudau@arm.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Rob Herring <robh+dt@kernel.org> Signed-off-by:
-
Wanpeng Li authored
commit 86893335 upstream. The commit 177ef2a6 ("sched/deadline: Fix a precision problem in the microseconds range") forgot to change the UP version of hrtick_start(), do so now. Signed-off-by:
Wanpeng Li <wanpeng.li@linux.intel.com> Fixes: 177ef2a6 ("sched/deadline: Fix a precision problem in the microseconds range") [ Fixed the changelog. ] Signed-off-by:
-
Dan Carpenter authored
commit 6ad10959 upstream. There are some missing unlocks on the error paths. Fixes: a939fc5a ('coresight-etm: add CoreSight ETM/PTM driver') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
-
Brian Norris authored
commit 5de61e7a upstream. The current organization of Documentation/stable_kernel_rules.txt doesn't clearly differentiate the mutually exclusive options for submission to the -stable review process. As I understand it, patches are not actually required to be mailed directly to stable@vger.kernel.org, but the instructions do not make this clear. Also, there are some established processes that are not listed -- specifically, what I call Option 2 below. This patch updates and reorganizes a bit, to make things clearer. Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Bard Liao authored
commit 85052924 upstream. RT5670_IRQ_CTRL1(0xbd) is a non volatile register. And we need to restore its value after suspend/resume. Signed-off-by:
Bard Liao <bardliao@realtek.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Peter Ujfalusi authored
commit d51199a8 upstream. DMA_BIT_MASK of 64 is not valid dma address mask for OMAPs, it should be set to 32. The 64 was introduced by commit (in 2009): a152ff24 ASoC: OMAP: Make DMA 64 aligned But the dma_mask and coherent_dma_mask can not be used to specify alignment. Fixes: a152ff24 (ASoC: OMAP: Make DMA 64 aligned) Reported-by:
Grygorii Strashko <Grygorii.Strashko@linaro.org> Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
-
Trond Myklebust authored
commit 7c0af9ff upstream. put_rpccred() can sleep. Fixes: 8f649c37 ("NFSv4: Fix the locking in nfs_inode_reclaim_delegation()") Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Trond Myklebust authored
commit 6c441c25 upstream. If we're traversing a directory which contains a submounted filesystem, or one that has a referral, the NFS server that is processing the READDIR request will often return information for the underlying (mounted-on) directory. It may, or may not, also return filehandle information. If this happens, and the lookup in nfs_prime_dcache() returns the dentry for the submounted directory, the filehandle comparison will fail, and we call d_invalidate(). Post-commit 8ed936b5 ("vfs: Lazily remove mounts on unlinked files and directories."), this means the entire subtree is unmounted. The following minimal patch addresses this problem by punting on the invalidation if there is a submount. Kudos to Neil Brown <neilb@suse.de> for having tracked down this issue (see link). Reported-by:
Nix <nix@esperi.org.uk> Link: http://lkml.kernel.org/r/87iofju9ht.fsf@spindle.srvr.nixSigned-off-by:
-
Heikki Krogerus authored
commit fcf0789a upstream. Commit 7d78cbef (serial: 8250_dw: add ability to handle the peripheral clock) introduces handling for a second clk to 8250_dw.c which is the driver also for LPSS UART. The second clk forces us to provide identifier (con_id) for the clkdev we create. This fixes an issue where 8250_dw.c is getting the same handler for both clocks. Fixes: 7d78cbef (serial: 8250_dw: add ability to handle the peripheral clock) Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
