Merge tag 'v5.13-rockchip-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

MMC aliases fixups and some property/compatible cleanups.

* tag 'v5.13-rockchip-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: move rv1108 mmcx aliases to board dts files
  ARM: dts: rockchip: move rk322x mmcx aliases to board dts files
  ARM: dts: rockchip: remove clock-names property from watchdog node in rv1108.dtsi
  ARM: dts: rockchip: add new watchdog compatible to rk322x.dtsi
  ARM: dts: rockchip: add new watchdog compatible to rv1108.dtsi

Link: https://lore.kernel.org/r/4638723.31r3eYUQgx@philSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Fix the etm node hex address to lower case for matching regexp
specification and removing the additional warning that looks like:

arch/arm/boot/dts/at91-sama5d2_ptc_ek.dt.yaml: /: 'etm@73C000' does not
match any of the regexes: '@(0|[1-9a-f][0-9a-f]*)$', '^[^@]+$',
'pinctrl-[0-9]+'
Reported-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

As suggested by Arnd Bergmann, mmc-aliases are supposed to be
board-specific, so move the newly added general aliases to
the board-level on rv1108-based boards.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20210324122235.1059292-2-heiko@sntech.de

As suggested by Arnd Bergmann, mmc-aliases are supposed to be
board-specific, so move the newly added general aliases to
the board-level on rk322x-based boards.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20210324122235.1059292-1-heiko@sntech.de

Merge tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

arm64: dts: amlogic: updates for v5.13 (round 2)
- updates/cleanups for Hardkernel Odroid N2/N2+

* tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  arm64: dts: meson: add GPIO line names to ODROID N2/N2+
  arm64: dts: meson: add saradc node to ODROID N2/N2+
  arm64: dts: meson: remove extra tab from ODROID N2/N2+ ext_mdio node

Link: https://lore.kernel.org/r/7htuofgwaz.fsf@baylibre.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-arm64-for-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

More Qualcomm ARM64 DT updates for 5.13

This adds RPMh regulators, coresight, AOSS qmp, ipcc, llcc for the
SC7280. It adds interconnect, PRNG and thermal pieces to SM8350. It
specifies the now required clocks for the SDM845 gcc, corrects the
firmware-name for adsp and cdsp on the db845c and defines DSI and panel
bits for Xiaomi Pocophone F1.

SM8150 gains iommu settings and the remaining I2C controllers and SM8250
gains Venus and the QMP PHY is updated to include the DP portion.

It adds the MSM8998 based OnePlus 5/5T device and enables sound support
on the Trogdor device family.

Lastly it adds the GIC hypervisor registers & interrupt for when Linux
is booted in EL2 on MSM8916.

* tag 'qcom-arm64-for-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (25 commits)
  arm64: dts: qcom: update usb qmp phy clock-cells property
  arm64: dts: qcom: msm8916: Add GICv2 hypervisor registers/interrupt
  arm64: dts: sdm845-db845c: make firmware filenames follow linux-firmware
  arm64: dts: qcom: sdm845-xiaomi-beryllium: Add DSI and panel bits
  arm64: dts: qcom: sc7280: Add Coresight support
  arm64: dts: qcom: sc7280: Add AOSS QMP node
  arm64: dts: qcom: sc7280: Add IPCC for SC7280 SoC
  arm64: dts: qcom: sc7280: Add device tree node for LLCC
  arm64: dts: qcom: Add support for OnePlus 5/5T
  arm64: dts: qcom: msm8998: Disable MSS remoteproc by default
  arm64: dts: qcom: Move rmtfs memory region
  arm64: dts: qcom: Add sound node for sc7180-trogdor-coachz
  arm64: dts: qcom: sc7180-trogdor: Add lpass dai link for I2S driver
  arm64: dts: qcom: use dp_phy to provide clocks to dispcc
  arm64: dts: qcom: sm8250: switch usb1 qmp phy to USB3+DP mode
  arm64: dts: qcom: sm8250: Add venus DT node
  arm64: dts: qcom: sm8250: Add videocc DT node
  arm64: dts: qcom: sm8350: Add interconnects
  arm64: dts: qcom: sm8350: Add support for PRNG EE
  arm64: dts: qcom: sc7280: Add RPMh regulators for sc7280-idp
  ...

Link: https://lore.kernel.org/r/20210409163949.776530-1-bjorn.andersson@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-dts-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm dts updates for v5.13

This adds Bluetooth support on the Samsung Galaxy S5, corrects the mount
matrix for the IMU on Nexus 5 and corrects the fuel gauge irq trigger
for the two devices.

* tag 'qcom-dts-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  ARM: dts: qcom: msm8974-klte: Add bluetooth support
  ARM: dts: qcom: msm8974: add blsp2_uart8
  ARM: dts: qcom: msm8974-samsung-klte: correct fuel gauge interrupt trigger level
  ARM: dts: qcom: msm8974-lge-nexus5: correct fuel gauge interrupt trigger level
  ARM: dts: qcom: msm8974-hammerhead: add mount matrix for IMU

Link: https://lore.kernel.org/r/20210409162359.776076-1-bjorn.andersson@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

The kernelci.org bot reports a build time regression:

arch/arm/boot/dts/ep7209.dtsi:187.17-192.4: Warning (interrupts_property): /keypad: Missing interrupt-parent

There is only one interrupt controller in this SoC, so I assume this
is the parent.

Fixes: 2bd86203 ("ARM: dts: clps711x: Add keypad node")
Reported-by: kernelci.org bot <bot@kernelci.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

dtc warns about a mismatched address:

arch/arm/boot/dts/armada-385-atl-x530.dts:171.14-199.4: Warning (spi_bus_reg): /soc/spi@10680/spi-flash@0: SPI bus unit address format error, expected "1"

I assume the "reg" property is correct here, so adjust the unit address
accordingly.

Fixes: c6dfc019 ("ARM: dts: mvebu: Add device tree for ATL-x530 Board")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kernelci.org bot <bot@kernelci.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'bmc-5.13-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt

BMC device tree updates for 5.13

The ASPEED and Nuvoton pull request now comes as a combined BMC pull
request.

 - New machines

  * ASRock E3C246D4I, an AST2500 BMC for an Xeon E-2100/E-2200 mini-ITX
    system
  * Quanta GBS, an NPCM730 BMC for an x86 server

 - Power10 BMC updates for Everest and Rainier

 - GPIO line names for Mihawk

* tag 'bmc-5.13-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: (21 commits)
  ARM: dts: nuvoton: Add Quanta GBS BMC Device Tree
  ARM: dts: aspeed: mihawk: Add GPIO line names
  ARM: dts: aspeed: Add Rainier 1S4U machine
  ARM: dts: aspeed: everest: Add size/address cells
  ARM: dts: aspeed: everest: Enable fan watchdog
  ARM: dts: aspeed: everest: Add RTC
  ARM: dts: aspeed: everest: GPIOs support
  ARM: dts: aspeed: everest: Add UCD90320 power sequencer
  ARM: dts: aspeed: everest: Add power supply i2c devices
  ARM: dts: aspeed: everest: Add pca9552 fan presence
  ARM: dts: aspeed: everest: Add FSI CFAMs and re-number engines
  ARM: dts: aspeed: everest: Add max31785 fan controller device
  ARM: dts: aspeed: everest: Add I2C components
  ARM: dts: aspeed: rainier 4U: Fix fan configuration
  ARM: dts: aspeed: rainier: Add missing fan nodes
  ARM: dts: aspeed: rainier: Enable fan watchdog
  ARM: dts: aspeed: rainier: Add presence GPIOs
  ARM: dts: aspeed: rainier: Add additional processor CFAMs
  ARM: dts: aspeed: rainier: Add gpio-keys-polled for fans
  ARM: dts: aspeed: rainier: Add directly controlled LEDs
  ...

Link: https://lore.kernel.org/r/CACPK8Xe-KV5BeQwOH6NKC1++FCVqwwNCGBh7hEbBORfrmxfTtQ@mail.gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Add device tree node for ATC2603C PMIC and remove the 'fixed-3.1V'
dummy regulator used for the uSD supply.

Additionally, add 'SYSPWR' fixed regulator and provide cpu0 supply.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/2e0a2931ae3757f016948e7c78e8e54afa325ae0.1615538629.git.cristian.ciocaltea@gmail.com
Link: https://lore.kernel.org/r/20210408062232.3575-1-mani@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'mvebu-dt-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt

mvebu dt for 5.13 (part 1)

Add support for ATL-x530 Board (Armada 38x based)

* tag 'mvebu-dt-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
  ARM: dts: mvebu: Add device tree for ATL-x530 Board

Link: https://lore.kernel.org/r/87v98xbzir.fsf@BL-laptopSigned-off-by: Arnd Bergmann <arnd@arndb.de>

The top-level node doesn't provide any clocks, the subnode provides a
single clock with of_clk_hw_simple_get.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20201123143705.14277-1-jonathan@marek.caSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The ARM Cortex-A53 CPU cores and QGIC2 interrupt controller
(an implementation of the ARM GIC 2.0 specification) used in MSM8916
support virtualization, e.g. for KVM on Linux. However, so far it was
not possible to make use of this functionality, because Qualcomm's
proprietary "hyp" firmware blocks the EL2 mode of the CPU and only
allows booting Linux in EL1.

However, on devices without (firmware) secure boot there is no need
to rely on all of Qualcomm's firmware. The "hyp" firmware on MSM8916
seems simple enough that it can be replaced with an open-source
alternative created only based on trial and error - with some similar
EL2/EL1 initialization code adapted from Linux and U-Boot.

qhypstub [1] is such an open-source firmware for MSM8916 that
can be used as drop-in replacement for Qualcomm's "hyp" firmware.
It does not implement any hypervisor functionality.
Instead, it allows booting Linux/KVM (or other hypervisors) in EL2.

With Linux booting in EL2, KVM seems to be working just fine on MSM8916.
However, so far it is not possible to make use of the virtualization
features in the GICv2. To use KVM's VGICv2 code, the QGIC2 device tree
node needs additional resources (according to binding documentation):

  - The CPU interface region (second reg) must be at least 8 KiB large
    to access the GICC_DIR register (mapped at 0x1000 offset)
  - Virtual control/CPU interface register base and size
  - Hypervisor maintenance interrupt

Fortunately, the public APQ8016E TRM [2] provides the required information:

  - The CPU interface region (at 0x0B002000) actually has a size of 8 KiB
  - Virtual control/CPU interface register is at 0x0B001000/0x0B004000
  - Hypervisor maintenance interrupt is "PPI #0"
      Note: This is a bit strange since almost all other ARM SoCs use
            GIC_PPI 9 for this. However, I have verified that this is
            indeed the interrupt that fires when bits are set in GICH_HCR.

Add the additional resources to the QGIC2 device tree node in msm8916.dtsi.
There is no functional difference when Linux is started in EL1 since the
additional resources are ignored in that case.

With these changes (and qhypstub), KVM seems to be fully working on
the DragonBoard 410c (apq8016-sbc) and BQ Aquaris X5 (longcheer-l8910).

[1]: https://github.com/msm8916-mainline/qhypstub
[2]: https://developer.qualcomm.com/download/sd410/snapdragon-410e-technical-reference-manual.pdfAcked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210407163648.4708-1-stephan@gerhold.netSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add the device tree for the Quanta GBS BMC based on NPCM730 SoC.
Signed-off-by: George Hung <george.hung@quantatw.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210330071336.18370-1-george.hung@quantatw.comSigned-off-by: Joel Stanley <joel@jms.id.au>

Name the GPIOs to help userspace work with them. The names describe the
functionality the lines provide, not the net or ball name. This makes it
easier to share userspace code across different systems and makes the
use of the lines more obvious.
Signed-off-by: Nichole Wang <Nichole_Wang@wistron.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210330020808.830-1-Nichole_Wang@wistron.comSigned-off-by: Joel Stanley <joel@jms.id.au>

The 1S4U version of the Rainier system has only 4 fans. Create a new
tree, include the 4U version, and delete the 2 extra fans.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-23-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

The gpio and fan nodes reg properties cause dtc to emit a noisy warning
about relying on default sizes.
Signed-off-by: Joel Stanley <joel@jms.id.au>

Set watchdog 1 to pulse the fan watchdog circuit that drives the FAULT
pin of the MAX31785, resulting in fans running at full speed, if at
any point the BMC stops pulsing it, such as a BMC reboot at runtime.
Enable watchdog 2 for BMC reboots.
Signed-off-by: Matthew Barth <msbarth@linux.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-21-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

Add the RTC at the appropriate I2C bus and address.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-20-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

This commit adds support for-
- Presence GPIOs
- I2C control GPIOs
- Op-panel GPIOs (ex PHR)
Signed-off-by: Alpana Kumari <alpankum@in.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Brandon Wyman <bjwyman@gmail.com>
Link: https://lore.kernel.org/r/20210329150020.13632-19-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

Add UCD90320 chip to Everest device tree.
Signed-off-by: Jim Wright <jlwright@us.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-18-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

Add the i2c/pmbus power supply devices to the everest device tree.
Signed-off-by: Brandon Wyman <bjwyman@gmail.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-17-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

Add the pca9552 at address 0x61 on i2c14 behind mux0 channel 3 with the
4 GPIO fan presence inputs.
Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Brandon Wyman <bjwyman@gmail.com>
Link: https://lore.kernel.org/r/20210329150020.13632-16-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

Add additional CFAMs and re-number the existing engines for the
extra processors present on the Everest system.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-15-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

Add the max31785 configuration at address 0x52 on i2c14 behind mux0
channel 3.
Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-14-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

Tested and able to bound the devices with i2c driver.
Signed-off-by: Priyanga Ramasamy <priyanga24@in.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-13-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

The 4U fans didn't have the correct properties since the fan nodes
were redefined. Fix this by referencing each fan individually and
adding the differences to the 4U fans.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-12-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

The Maxim fan controller has six fans attached. Two of these were
missing from the description.
Signed-off-by: Joel Stanley <joel@jms.id.au>

Set watchdog 1 to pulse the fan watchdog circuit that drives the FAULT
pin of the MAX31785, resulting in fans running at full speed, if at
any point the BMC stops pulsing it, such as a BMC reboot at runtime.
Enable watchdog 2 for BMC reboots.
Signed-off-by: Matthew Barth <msbarth@linux.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210329150020.13632-11-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

This commit adds presence detect GPIO chips for various FRUs on
Rainier. Also, correct the I2C address for the tca9554.
Signed-off-by: Alpana Kumari <alpankum@in.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-10-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

Rainier has two dual-chip modules and therefore four CFAMs with their
associated engines. Add these to the devicetree with the i2c busses
that have devices on them.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210329150020.13632-5-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

Add a gpio-keys-polled section to the Rainier device tree for the fan
presence signals on the PCA9552 I2C device on bus 7.
Signed-off-by: Brandon Wyman <bjwyman@gmail.com>
Signed-off-by: Matthew Barth <msbarth@linux.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-4-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

These LEDs are directly connected to the BMC's GPIO bank.
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-3-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

This is a relatively low-cost AST2500-based Xeon E-2100/E-2200 series
mini-ITX board that we hope can provide a decent platform for OpenBMC
development.

This initial device-tree provides the necessary configuration for
basic BMC functionality such as host power control, serial console and
KVM support, and POST code snooping.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210401044232.9637-1-zev@bewilderbeest.netSigned-off-by: Joel Stanley <joel@jms.id.au>

Add device tree file for x530 board. This has an Armada 385 SoC. Has
NAND-flash for user storage and SPI for booting. Covers majority of x530
and GS980MX variants.
Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

AT91 dt for 5.13:

- two little fixes (typo, W=1)
- a change in gpio button keycode for recent boards

* tag 'at91-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: dts: at91: sama5d2: add ETB and ETM unit name
  ARM: dts: at91: change the key code of the gpio key
  ARM: dts: at91: Fix a typo

Link: https://lore.kernel.org/r/20210407114415.13180-1-nicolas.ferre@microchip.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Add GPIO line-name identifiers to the ODROID N2/N2+ common dtsi.
Signed-off-by: Hyeonki Hong <hhk7734@gmail.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210407042609.9736-4-christianshewitt@gmail.com

Add the meson saradc node to the ODROID N2/N2+ common dtsi.
Signed-off-by: Hyeonki Hong <hhk7734@gmail.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210407042609.9736-3-christianshewitt@gmail.com

Remove an extra tab from the ext_mdio node in the ODROID N2/N2+ common
dtsi file.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210407042609.9736-2-christianshewitt@gmail.com