- 28 Jul, 2018 3 commits
-
-
Paolo Abeni authored
[ Upstream commit 3dd1c9a1 ] The skb hash for locally generated ip[v6] fragments belonging to the same datagram can vary in several circumstances: * for connected UDP[v6] sockets, the first fragment get its hash via set_owner_w()/skb_set_hash_from_sk() * for unconnected IPv6 UDPv6 sockets, the first fragment can get its hash via ip6_make_flowlabel()/skb_get_hash_flowi6(), if auto_flowlabel is enabled For the following frags the hash is usually computed via skb_get_hash(). The above can cause OoO for unconnected IPv6 UDPv6 socket: in that scenario the egress tx queue can be selected on a per packet basis via the skb hash. It may also fool flow-oriented schedulers to place fragments belonging to the same datagram in different flows. Fix the issue by copying the skb hash from the head frag into the others at fragmentation time. Before this commit: perf probe -a "dev_queue_xmit skb skb->hash skb->l4_hash:b1@0/8 skb->sw_hash:b1@1/8" netperf -H $IPV4 -t UDP_STREAM -l 5 -- -m 2000 -n & perf record -e probe:dev_queue_xmit -e probe:skb_set_owner_w -a sleep 0.1 perf script probe:dev_queue_xmit: (ffffffff8c6b1b20) hash=3713014309 l4_hash=1 sw_hash=0 probe:dev_queue_xmit: (ffffffff8c6b1b20) hash=0 l4_hash=0 sw_hash=0 After this commit: probe:dev_queue_xmit: (ffffffff8c6b1b20) hash=2171763177 l4_hash=1 sw_hash=0 probe:dev_queue_xmit: (ffffffff8c6b1b20) hash=2171763177 l4_hash=1 sw_hash=0 Fixes: b73c3d0e ("net: Save TX flow hash in sock and set in skbuf on xmit") Fixes: 67800f9b ("ipv6: Call skb_get_hash_flowi6 to get skb->hash in ip6_make_flowlabel") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paul Burton authored
commit 38c0a74f upstream. The MIPS implementation of pci_resource_to_user() introduced in v3.12 by commit 4c2924b7 ("MIPS: PCI: Use pci_resource_to_user to map pci memory space properly") incorrectly sets *end to the address of the byte after the resource, rather than the last byte of the resource. This results in userland seeing resources as a byte larger than they actually are, for example a 32 byte BAR will be reported by a tool such as lspci as being 33 bytes in size: Region 2: I/O ports at 1000 [disabled] [size=33] Correct this by subtracting one from the calculated end address, reporting the correct address to userland. Signed-off-by:
Paul Burton <paul.burton@mips.com> Reported-by:
Rui Wang <rui.wang@windriver.com> Fixes: 4c2924b7 ("MIPS: PCI: Use pci_resource_to_user to map pci memory space properly") Cc: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # v3.12+ Patchwork: https://patchwork.linux-mips.org/patch/19829/Signed-off-by:
-
Felix Fietkau authored
commit bc88ad2e upstream. ath79_ddr_wb_flush_base has the type void __iomem *, so register offsets need to be a multiple of 4 in order to access the intended register. Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
John Crispin <john@phrozen.org> Signed-off-by:
-
- 25 Jul, 2018 29 commits
-
-
Greg Kroah-Hartman authored
-
Alan Jenkins authored
commit 1dc3039b upstream. When blk_queue_enter() waits for a queue to unfreeze, or unset the PREEMPT_ONLY flag, do not allow it to be interrupted by a signal. The PREEMPT_ONLY flag was introduced later in commit 3a0a5299 ("block, scsi: Make SCSI quiesce and resume work reliably"). Note the SCSI device is resumed asynchronously, i.e. after un-freezing userspace tasks. So that commit exposed the bug as a regression in v4.15. A mysterious SIGBUS (or -EIO) sometimes happened during the time the device was being resumed. Most frequently, there was no kernel log message, and we saw Xorg or Xwayland killed by SIGBUS.[1] [1] E.g. https://bugzilla.redhat.com/show_bug.cgi?id=1553979 Without this fix, I get an IO error in this test: # dd if=/dev/sda of=/dev/null iflag=direct & \ while killall -SIGUSR1 dd; do sleep 0.1; done & \ echo mem > /sys/power/state ; \ sleep 5; killall dd # stop after 5 seconds The interruptible wait was added to blk_queue_enter in commit 3ef28e83 ("block: generic request_queue reference counting"). Before then, the interruptible wait was only in blk-mq, but I don't think it could ever have been correct. Reviewed-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: stable@vger.kernel.org Signed-off-by:
Alan Jenkins <alan.christopher.jenkins@gmail.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Chuck Lever authored
commit a8f688ec upstream. The use of -EAGAIN in rpcrdma_convert_iovs() is a latent bug: the transport never calls xprt_write_space() when more pages become available. -ENOBUFS will trigger the correct "delay briefly and call again" logic. Fixes: 7a89f9c6 ("xprtrdma: Honor ->send_request API contract") Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Cc: stable@vger.kernel.org # 4.8+ Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Mathias Nyman authored
commit 229bc19f upstream. Don't rely on event interrupt (EINT) bit alone to detect pending port change in resume. If no change event is detected the host may be suspended again, oterwise roothubs are resumed. There is a lag in xHC setting EINT. If we don't notice the pending change in resume, and the controller is runtime suspeded again, it causes the event handler to assume host is dead as it will fail to read xHC registers once PCI puts the controller to D3 state. [ 268.520969] xhci_hcd: xhci_resume: starting port polling. [ 268.520985] xhci_hcd: xhci_hub_status_data: stopping port polling. [ 268.521030] xhci_hcd: xhci_suspend: stopping port polling. [ 268.521040] xhci_hcd: // Setting command ring address to 0x349bd001 [ 268.521139] xhci_hcd: Port Status Change Event for port 3 [ 268.521149] xhci_hcd: resume root hub [ 268.521163] xhci_hcd: port resume event for port 3 [ 268.521168] xhci_hcd: xHC is not running. [ 268.521174] xhci_hcd: handle_port_status: starting port polling. [ 268.596322] xhci_hcd: xhci_hc_died: xHCI host controller not responding, assume dead The EINT lag is described in a additional note in xhci specs 4.19.2: "Due to internal xHC scheduling and system delays, there will be a lag between a change bit being set and the Port Status Change Event that it generated being written to the Event Ring. If SW reads the PORTSC and sees a change bit set, there is no guarantee that the corresponding Port Status Change Event has already been written into the Event Ring." Cc: <stable@vger.kernel.org> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Stefano Brivio authored
[ Upstream commit e78bfb07 ] Commit 8b700862 ("net: Don't copy pfmemalloc flag in __copy_skb_header()") introduced a different handling for the pfmemalloc flag in copy and clone paths. In __skb_clone(), now, the flag is set only if it was set in the original skb, but not cleared if it wasn't. This is wrong and might lead to socket buffers being flagged with pfmemalloc even if the skb data wasn't allocated from pfmemalloc reserves. Copy the flag instead of ORing it. Reported-by:
Sabrina Dubroca <sd@queasysnail.net> Fixes: 8b700862 ("net: Don't copy pfmemalloc flag in __copy_skb_header()") Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Tested-by:
-
Stefano Brivio authored
[ Upstream commit 8b700862 ] The pfmemalloc flag indicates that the skb was allocated from the PFMEMALLOC reserves, and the flag is currently copied on skb copy and clone. However, an skb copied from an skb flagged with pfmemalloc wasn't necessarily allocated from PFMEMALLOC reserves, and on the other hand an skb allocated that way might be copied from an skb that wasn't. So we should not copy the flag on skb copy, and rather decide whether to allow an skb to be associated with sockets unrelated to page reclaim depending only on how it was allocated. Move the pfmemalloc flag before headers_start[0] using an existing 1-bit hole, so that __copy_skb_header() doesn't copy it. When cloning, we'll now take care of this flag explicitly, contravening to the warning comment of __skb_clone(). While at it, restore the newline usage introduced by commit b1937227 ("net: reorganize sk_buff for faster __copy_skb_header()") to visually separate bytes used in bitfields after headers_start[0], that was gone after commit a9e419dc ("netfilter: merge ctinfo into nfct pointer storage area"), and describe the pfmemalloc flag in the kernel-doc structure comment. This doesn't change the size of sk_buff or cacheline boundaries, but consolidates the 15 bits hole before tc_index into a 2 bytes hole before csum, that could now be filled more easily. Reported-by:
Patrick Talbert <ptalbert@redhat.com> Fixes: c93bdd0e ("netvm: allow skb allocation to use PFMEMALLOC reserves") Signed-off-by:
-
Alexander Couzens authored
[ Upstream commit 5c968f48 ] mii_nway_restart is not pm aware which results in a rtnl deadlock. Implement mii_nway_restart manual by setting BMCR_ANRESTART if BMCR_ANENABLE is set. To reproduce: * plug an asix based usb network interface * wait until the device enters PM (~5 sec) * `ip link set eth1 up` will never return Fixes: d9fe64e5 ("net: asix: Add in_pm parameter") Signed-off-by:
Alexander Couzens <lynxis@fe80.eu> Signed-off-by:
-
Sanjeev Bansal authored
[ Upstream commit 3a498606 ] This patch has fix for TX timeout while running bi-directional traffic with 100 Mbps using 5762. Signed-off-by:
Sanjeev Bansal <sanjeevb.bansal@broadcom.com> Signed-off-by:
Siva Reddy Kallam <siva.kallam@broadcom.com> Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Matevz Vucnik authored
[ Upstream commit 38cd58ed ] This adds the USB id of LTE modem Quectel EG91. It requires the same quirk as other Quectel modems to make it work. Signed-off-by:
Matevz Vucnik <vucnikm@gmail.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Gustavo A. R. Silva authored
[ Upstream commit 9ba8376c ] It seems that a *break* is missing in order to avoid falling through to the default case. Otherwise, checking *chan* makes no sense. Fixes: 72df7a72 ("ptp: Allow reassigning calibration pin function") Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Heiner Kallweit authored
[ Upstream commit df8ed346 ] Currently also the pause flags are removed from phydev->supported because they're not included in PHY_DEFAULT_FEATURES. I don't think this is intended, especially when considering that this function can be called via phy_set_max_speed() anywhere in a driver. Change the masking to mask out only the values we're going to change. In addition remove the misleading comment, job of this small function is just to adjust the supported and advertised speeds. Fixes: f3a6bd39 ("phylib: Add phy_set_max_speed helper") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
David Ahern authored
[ Upstream commit e7372197 ] Xin reported that icmp replies may not use the address on the device the echo request is received if the destination address is broadcast. Instead a route lookup is done without considering VRF context. Fix by setting oif in flow struct to the master device if it is enslaved. That directs the lookup to the VRF table. If the device is not enslaved, oif is still 0 so no affect. Fixes: cd2fbe1b ("net: Use VRF device index for lookups on RX") Reported-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Lorenzo Colitti authored
[ Upstream commit acc2cf4e ] When tcp_diag_destroy closes a TCP_NEW_SYN_RECV socket, it first frees it by calling inet_csk_reqsk_queue_drop_and_and_put in tcp_abort, and then frees it again by calling sock_gen_put. Since tcp_abort only has one caller, and all the other codepaths in tcp_abort don't free the socket, just remove the free in that function. Cc: David Ahern <dsa@cumulusnetworks.com> Tested: passes Android sock_diag_test.py, which exercises this codepath Fixes: d7226c7a ("net: diag: Fix refcnt leak in error path destroying socket") Signed-off-by:
Lorenzo Colitti <lorenzo@google.com> Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Tested-by:
-
Davidlohr Bueso authored
[ Upstream commit 107d01f5 ] rhashtable_init() currently does not take into account the user-passed min_size parameter unless param->nelem_hint is set as well. As such, the default size (number of buckets) will always be HASH_DEFAULT_SIZE even if the smallest allowed size is larger than that. Remediate this by unconditionally calling into rounded_hashtable_size() and handling things accordingly. Signed-off-by:
Davidlohr Bueso <dbueso@suse.de> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit 169dc027 ] The rol32 call is currently rotating hash but the rol'd value is being discarded. I believe the current code is incorrect and hash should be assigned the rotated value returned from rol32. Thanks to David Lebrun for spotting this. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Tyler Hicks authored
[ Upstream commit 70ba5b6d ] The low and high values of the net.ipv4.ping_group_range sysctl were being silently forced to the default disabled state when a write to the sysctl contained GIDs that didn't map to the associated user namespace. Confusingly, the sysctl's write operation would return success and then a subsequent read of the sysctl would indicate that the low and high values are the overflowgid. This patch changes the behavior by clearly returning an error when the sysctl write operation receives a GID range that doesn't map to the associated user namespace. In such a situation, the previous value of the sysctl is preserved and that range will be returned in a subsequent read of the sysctl. Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Signed-off-by:
-
Toke Høiland-Jørgensen authored
[ Upstream commit d5a672ac ] The gen_stats facility will add a header for the toplevel nlattr of type TCA_STATS2 that contains all stats added by qdisc callbacks. A reference to this header is stored in the gnet_dump struct, and when all the per-qdisc callbacks have finished adding their stats, the length of the containing header will be adjusted to the right value. However, on architectures that need padding (i.e., that don't set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS), the padding nlattr is added before the stats, which means that the stored pointer will point to the padding, and so when the header is fixed up, the result is just a very big padding nlattr. Because most qdiscs also supply the legacy TCA_STATS struct, this problem has been mostly invisible, but we exposed it with the netlink attribute-based statistics in CAKE. Fix the issue by fixing up the stored pointer if it points to a padding nlattr. Tested-by:
Pete Heist <pete@heistp.net> Tested-by:
Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk> Signed-off-by:
Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by:
-
Ville Syrjälä authored
commit 96a85cc5 upstream. Just like with PIPESTAT, the edge triggered IIR on i965/g4x also causes problems for hotplug interrupts. To make sure we don't get the IIR port interrupt bit stuck low with the ISR bit high we must force an edge in ISR. Unfortunately we can't borrow the PIPESTAT trick and toggle the enable bits in PORT_HOTPLUG_EN as that act itself generates hotplug interrupts. Instead we just have to loop until we've cleared PORT_HOTPLUG_STAT, or we just give up and WARN. v2: Don't frob with PORT_HOTPLUG_EN Cc: stable@vger.kernel.org Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180614175625.1615-1-ville.syrjala@linux.intel.comReviewed-by:
Imre Deak <imre.deak@intel.com> (cherry picked from commit 0ba7c51a) Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Gustavo A. R. Silva authored
commit 0e714d27 upstream. info.index can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/vfio/pci/vfio_pci.c:734 vfio_pci_ioctl() warn: potential spectre issue 'vdev->region' Fix this by sanitizing info.index before indirectly using it to index vdev->region Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
Hugh Dickins authored
commit e1f1b157 upstream. __split_huge_pmd_locked() must check if the cleared huge pmd was dirty, and propagate that to PageDirty: otherwise, data may be lost when a huge tmpfs page is modified then split then reclaimed. How has this taken so long to be noticed? Because there was no problem when the huge page is written by a write system call (shmem_write_end() calls set_page_dirty()), nor when the page is allocated for a write fault (fault_dirty_shared_page() calls set_page_dirty()); but when allocated for a read fault (which MAP_POPULATE simulates), no set_page_dirty(). Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1807111741430.1106@eggly.anvils Fixes: d21b9e57 ("thp: handle file pages in split_huge_pmd()") Signed-off-by:
Hugh Dickins <hughd@google.com> Reported-by:
Ashwin Chaugule <ashwinch@google.com> Reviewed-by:
Yang Shi <yang.shi@linux.alibaba.com> Reviewed-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: <stable@vger.kernel.org> [4.8+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jing Xia authored
commit 9f15bde6 upstream. It was reported that a kernel crash happened in mem_cgroup_iter(), which can be triggered if the legacy cgroup-v1 non-hierarchical mode is used. Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b8f ...... Call trace: mem_cgroup_iter+0x2e0/0x6d4 shrink_zone+0x8c/0x324 balance_pgdat+0x450/0x640 kswapd+0x130/0x4b8 kthread+0xe8/0xfc ret_from_fork+0x10/0x20 mem_cgroup_iter(): ...... if (css_tryget(css)) <-- crash here break; ...... The crashing reason is that mem_cgroup_iter() uses the memcg object whose pointer is stored in iter->position, which has been freed before and filled with POISON_FREE(0x6b). And the root cause of the use-after-free issue is that invalidate_reclaim_iterators() fails to reset the value of iter->position to NULL when the css of the memcg is released in non- hierarchical mode. Link: http://lkml.kernel.org/r/1531994807-25639-1-git-send-email-jing.xia@unisoc.com Fixes: 6df38689 ("mm: memcontrol: fix possible memcg leak due to interrupted reclaim") Signed-off-by:
Jing Xia <jing.xia.mail@gmail.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: <chunyan.zhang@unisoc.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Alexey Brodkin authored
commit 64234961 upstream. We used to have pre-set CONFIG_INITRAMFS_SOURCE with local path to intramfs in ARC defconfigs. This was quite convenient for in-house development but not that convenient for newcomers who obviusly don't have folders like "arc_initramfs" next to the Linux source tree. Which leads to quite surprising failure of defconfig building: ------------------------------->8----------------------------- ../scripts/gen_initramfs_list.sh: Cannot open '../../arc_initramfs_hs/' ../usr/Makefile:57: recipe for target 'usr/initramfs_data.cpio.gz' failed make[2]: *** [usr/initramfs_data.cpio.gz] Error 1 ------------------------------->8----------------------------- So now when more and more people start to deal with our defconfigs let's make their life easier with removal of CONFIG_INITRAMFS_SOURCE. Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: stable@vger.kernel.org Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Vineet Gupta authored
commit 93312b6d upstream. mprotect(EXEC) was failing for stack mappings as default vm flags was missing MAYEXEC. This was triggered by glibc test suite nptl/tst-execstack testcase What is surprising is that despite running LTP for years on, we didn't catch this issue as it lacks a directed test case. gcc dejagnu tests with nested functions also requiring exec stack work fine though because they rely on the GNU_STACK segment spit out by compiler and handled in kernel elf loader. This glibc case is different as the stack is non exec to begin with and a dlopen of shared lib with GNU_STACK segment triggers the exec stack proceedings using a mprotect(PROT_EXEC) which was broken. CC: stable@vger.kernel.org Signed-off-by:
-
Alexey Brodkin authored
commit 6e376114 upstream. swap was broken on ARC due to silly copy-paste issue. We encode offset from swapcache page in __swp_entry() as (off << 13) but were not decoding back in __swp_offset() as (off >> 13) - it was still (off << 13). This finally fixes swap usage on ARC. | # mkswap /dev/sda2 | | # swapon -a -e /dev/sda2 | Adding 500728k swap on /dev/sda2. Priority:-2 extents:1 across:500728k | | # free | total used free shared buffers cached | Mem: 765104 13456 751648 4736 8 4736 | -/+ buffers/cache: 8712 756392 | Swap: 500728 0 500728 Cc: stable@vger.kernel.org Signed-off-by:
-
Takashi Iwai authored
commit 39675f7a upstream. The SNDRV_RAWMIDI_IOCTL_PARAMS ioctl may resize the buffers and the current code is racy. For example, the sequencer client may write to buffer while it being resized. As a simple workaround, let's switch to the resized buffer inside the stream runtime lock. Reported-by: syzbot+52f83f0ea8df16932f7f@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
OGAWA Hirofumi authored
commit 35033ab9 upstream. In parse_options(), if match_strdup() failed, parse_options() leaves opts->iocharset in unexpected state (i.e. still pointing the freed string). And this can be the cause of double free. To fix, this initialize opts->iocharset always when freeing. Link: http://lkml.kernel.org/r/8736wp9dzc.fsf@mail.parknet.co.jpSigned-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Reported-by: syzbot+90b8e10515ae88228a92@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by:
-
Dewet Thibaut authored
commit fbdb328c upstream. commit b3b7c479 ("x86/MCE: Serialize sysfs changes") introduced a min interval limitation when setting the check interval for polled MCEs. However, the logic is that 0 disables polling for corrected MCEs, see Documentation/x86/x86_64/machinecheck. The limitation prevents disabling. Remove this limitation and allow the value 0 to disable polling again. Fixes: b3b7c479 ("x86/MCE: Serialize sysfs changes") Signed-off-by:
Dewet Thibaut <thibaut.dewet@nokia.com> Signed-off-by:
Alexander Sverdlin <alexander.sverdlin@nokia.com> [ Massage commit message. ] Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20180716084927.24869-1-alexander.sverdlin@nokia.comSigned-off-by:
-
Ville Syrjälä authored
commit 6f6060a5 upstream. APM_DO_POP_SEGS does not restore fs/gs which were zeroed by APM_DO_ZERO_SEGS. Trying to access __preempt_count with zeroed fs doesn't really work. Move the ibrs call outside the APM_DO_SAVE_SEGS/APM_DO_RESTORE_SEGS invocations so that fs is actually restored before calling preempt_enable(). Fixes the following sort of oopses: [ 0.313581] general protection fault: 0000 [#1] PREEMPT SMP [ 0.313803] Modules linked in: [ 0.314040] CPU: 0 PID: 268 Comm: kapmd Not tainted 4.16.0-rc1-triton-bisect-00090-gdd84441a #19 [ 0.316161] EIP: __apm_bios_call_simple+0xc8/0x170 [ 0.316161] EFLAGS: 00210016 CPU: 0 [ 0.316161] EAX: 00000102 EBX: 00000000 ECX: 00000102 EDX: 00000000 [ 0.316161] ESI: 0000530e EDI: dea95f64 EBP: dea95f18 ESP: dea95ef0 [ 0.316161] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 [ 0.316161] CR0: 80050033 CR2: 00000000 CR3: 015d3000 CR4: 000006d0 [ 0.316161] Call Trace: [ 0.316161] ? cpumask_weight.constprop.15+0x20/0x20 [ 0.316161] on_cpu0+0x44/0x70 [ 0.316161] apm+0x54e/0x720 [ 0.316161] ? __switch_to_asm+0x26/0x40 [ 0.316161] ? __schedule+0x17d/0x590 [ 0.316161] kthread+0xc0/0xf0 [ 0.316161] ? proc_apm_show+0x150/0x150 [ 0.316161] ? kthread_create_worker_on_cpu+0x20/0x20 [ 0.316161] ret_from_fork+0x2e/0x38 [ 0.316161] Code: da 8e c2 8e e2 8e ea 57 55 2e ff 1d e0 bb 5d b1 0f 92 c3 5d 5f 07 1f 89 47 0c 90 8d b4 26 00 00 00 00 90 8d b4 26 00 00 00 00 90 <64> ff 0d 84 16 5c b1 74 7f 8b 45 dc 8e e0 8b 45 d8 8e e8 8b 45 [ 0.316161] EIP: __apm_bios_call_simple+0xc8/0x170 SS:ESP: 0068:dea95ef0 [ 0.316161] ---[ end trace 656253db2deaa12c ]--- Fixes: dd84441a ("x86/speculation: Use IBRS if available before calling into firmware") Signed-off-by:
-
Lan Tianyu authored
commit b5020a8e upstream. Syzbot reports crashes in kvm_irqfd_assign(), caused by use-after-free when kvm_irqfd_assign() and kvm_irqfd_deassign() run in parallel for one specific eventfd. When the assign path hasn't finished but irqfd has been added to kvm->irqfds.items list, another thead may deassign the eventfd and free struct kvm_kernel_irqfd(). The assign path then uses the struct kvm_kernel_irqfd that has been freed by deassign path. To avoid such issue, keep irqfd under kvm->irq_srcu protection after the irqfd has been added to kvm->irqfds.items list, and call synchronize_srcu() in irq_shutdown() to make sure that irqfd has been fully initialized in the assign path. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Tianyu Lan <tianyu.lan@intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
- 22 Jul, 2018 8 commits
-
-
Greg Kroah-Hartman authored
-
Tejun Heo authored
commit 08a77676 upstream. e7fd37ba ("cgroup: avoid copying strings longer than the buffers") converted possibly unsafe strncpy() usages in cgroup to strscpy(). However, although the callsites are completely fine with truncated copied, because strscpy() is marked __must_check, it led to the following warnings. kernel/cgroup/cgroup.c: In function ‘cgroup_file_name’: kernel/cgroup/cgroup.c:1400:10: warning: ignoring return value of ‘strscpy’, declared with attribute warn_unused_result [-Wunused-result] strscpy(buf, cft->name, CGROUP_FILE_NAME_MAX); ^ To avoid the warnings, 50034ed4 ("cgroup: use strlcpy() instead of strscpy() to avoid spurious warning") switched them to strlcpy(). strlcpy() is worse than strlcpy() because it unconditionally runs strlen() on the source string, and the only reason we switched to strlcpy() here was because it was lacking __must_check, which doesn't reflect any material differences between the two function. It's just that someone added __must_check to strscpy() and not to strlcpy(). These basic string copy operations are used in variety of ways, and one of not-so-uncommon use cases is safely handling truncated copies, where the caller naturally doesn't care about the return value. The __must_check doesn't match the actual use cases and forces users to opt for inferior variants which lack __must_check by happenstance or spread ugly (void) casts. Remove __must_check from strscpy() and restore strscpy() usages in cgroup. Signed-off-by:
Tejun Heo <tj@kernel.org> Suggested-by:
-
Marc Zyngier authored
commit 5d81f7dc upstream. Now that all our infrastructure is in place, let's expose the availability of ARCH_WORKAROUND_2 to guests. We take this opportunity to tidy up a couple of SMCCC constants. Acked-by:
Christoffer Dall <christoffer.dall@arm.com> Reviewed-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Marc Zyngier authored
commit b4f18c06 upstream. In order to forward the guest's ARCH_WORKAROUND_2 calls to EL3, add a small(-ish) sequence to handle it at EL2. Special care must be taken to track the state of the guest itself by updating the workaround flags. We also rely on patching to enable calls into the firmware. Note that since we need to execute branches, this always executes after the Spectre-v2 mitigation has been applied. Reviewed-by:
-
Marc Zyngier authored
commit 55e3748e upstream. In order to offer ARCH_WORKAROUND_2 support to guests, we need a bit of infrastructure. Let's add a flag indicating whether or not the guest uses SSBD mitigation. Depending on the state of this flag, allow KVM to disable ARCH_WORKAROUND_2 before entering the guest, and enable it when exiting it. Reviewed-by:
-
Marc Zyngier authored
commit 85478bab upstream. As we're going to require to access per-cpu variables at EL2, let's craft the minimum set of accessors required to implement reading a per-cpu variable, relying on tpidr_el2 to contain the per-cpu offset. Reviewed-by:
-
Marc Zyngier authored
commit 9cdc0108 upstream. If running on a system that performs dynamic SSBD mitigation, allow userspace to request the mitigation for itself. This is implemented as a prctl call, allowing the mitigation to be enabled or disabled at will for this particular thread. Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Marc Zyngier authored
commit 9dd9614f upstream. In order to allow userspace to be mitigated on demand, let's introduce a new thread flag that prevents the mitigation from being turned off when exiting to userspace, and doesn't turn it on on entry into the kernel (with the assumption that the mitigation is always enabled in the kernel itself). This will be used by a prctl interface introduced in a later patch. Reviewed-by:
-
