- 06 Jan, 2012 11 commits
-
-
Manjunath Hadli authored
This patch implements the core additions to the display driver, mainly controlling the VENC and other encoders for dm365. This patch also includes addition of amplifier subdevice to the vpbe driver and interfacing with venc subdevice. Signed-off-by:
Manjunath Hadli <manjunath.hadli@ti.com> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans de Goede authored
When using the SN9C20X_I420 fmt the sn9c20x needs more bandwidth than our regular bandwidth calculations reserve. This patch adds a sd_isoc_init function, which forces the use of a specific altsetting when using the SN9C20X_I420 fmt. This fixes the bottom 10-30% of the image getting corrupted when using the SN9C20X_I420 fmt (which is the default fmt). Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Jean-François Moine <moinejf@free.fr> Signed-off-by:
-
Hans de Goede authored
Some cameras will pretty much entirely fill all the image buffers all the time even though they are using compression. This patch adds a flag to sd_desc, which drivers for such cameras can set. When this flag is set the bandwidth calculation code will no longer assume that the image buffer size is a worst case and less bandwidth than imagebufsize * fps will be used on average. This patch sets this new flag for 3 drivers: * For spca561 (for rev12a cameras) and nw80x cams as these simply don't work when given less bandwidth than imagebufsize * fps. * For sn9c20x cameras, because these show severy jpeg artifacts when given less bandwidth than imagebufsize * fps and since these are usb2 cameras there is plenty bandwidth anyways. Signed-off-by:
-
Hans de Goede authored
Quoting from the official usb 20 spec: "5.6.4 Isochronous Transfer Bus Access Constraints Isochronous transfers can only be used by full-speed and high-speed devices." This means that for code paths which are isoc mode only, we don't need to check for the device being low speed, simplifying the code. Signed-off-by:
-
Hans de Goede authored
Signed-off-by:
-
Hans de Goede authored
Check dev->actconfig rather than dev->config when checking various configuration things. dev->config points to the array of configs for the device so dev->config->foo boils down to dev->config[0].foo and the first config is not necessarily always the active config. Signed-off-by:
-
Hans de Goede authored
In case we ever get sub drivers which do 7.5 fps and express this as 15 / 2 fps. Signed-off-by:
-
Hans de Goede authored
The calculated bandwidth should not be multiplied by the interval, but be divided by it. Also bInterbval should be interpreted as a power of 2 for isochronous endpoints. Signed-off-by:
-
Hans de Goede authored
After the "gspca: Fix bulk mode cameras no longer working (regression fix)" patch build_ep_tb is no longer being called for bulk endpoints. This patch renames build_ep_tb to build_isoc_ep_tb to make clear it should only be called for isoc mode cameras. This patch also: - drops the no longer needed xfer parameter - removes a check for bulk mode from the build_isoc_ep_tb code Signed-off-by:
-
Jean-François Moine authored
Having: - a mean image size of 0.375 time the max compressed image size and - a frame rate of 30 fps for small images or with USB 2.0/3.0 seems more realistic and gives less image freezes. Signed-off-by:
-
Jose Alberto Reguero authored
This path add support to "OmniVision Technologies, Inc. VEHO Filmscanner". Signed-off-by:
Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by:
-
- 05 Jan, 2012 29 commits
-
-
Gareth Williams authored
Fix detection of EMP202 audio chip. Some versions have an id of 0x83847650 instead of 0xffffffff Honestech Vidbox NW03 has a EMP202 audio chip with a different Vendor ID. Apparently, it is the same with the Gadmei ITV380: http://linuxtv.org/wiki/index.php/Gadmei_USB_TVBox_UTV380Signed-off-by:
Gareth Williams <gareth@garethwilliams.me.uk> Signed-off-by:
-
Malcolm Priestley authored
Support for IT1935 9006 devices. 9006 have version 2 type chip. 9006 devices should use dvb-usb-it9135-02.fw firmware. On the device tested the tuner id was set to 0 which meant the driver used tuner id 0x38. The device functioned normally. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Instead of creating two DVB frontend entries for the same device, create just one entry, and fill the delivery_system according with the supported standards. Signed-off-by: -
Mauro Carvalho Chehab authored
ops.info.frequency_stepsize is used only for DVB-T & friends. For DVB-C, the step size is calculated using the symbol rate. Signed-off-by: -
Mauro Carvalho Chehab authored
While this patch change some things, the updated fields there are used just on printk, so it shouldn't cause any functional changes. Yet, this routine is a little complex, so explain a little more how it works. Signed-off-by: -
Mauro Carvalho Chehab authored
Instead of changing the ops.info.type struct, updates only the data that will be returned to userspace. Also add some debug messages to help tracking such issues. Signed-off-by: -
Mauro Carvalho Chehab authored
without it, the loop will run forever! Signed-off-by: -
Stefan Ringel authored
[mchehab@redhat.com: patch rebased to apply] Signed-off-by:
Stefan Ringel <linuxtv@stefanringel.de> Signed-off-by:
-
Mauro Carvalho Chehab authored
WARNING: "__udivdi3" [/home/v4l/new_build/v4l/cx25840.ko] undefined! 64 bits division need to call do_div & friends, in order to allow it to compile with 32 bits kernels Cc: Steven Toth <stoth@kernellabs.com> Signed-off-by: -
Steven Toth authored
Making the detected video standard available to the core driver and for user query. Signed-off-by:
Steven Toth <stoth@kernellabs.com> Signed-off-by:
-
Steven Toth authored
Adding support for the CX23888 DIF. Changes regression tested against the HVR1700 and HVR1800. Split out much of the set and init handling of the cx23885 based cards into their own functions. Added the DIF initialization code for each supported IF. Updated the cx23885 code to correctly initialize cx23888 based video/audio decoders. Enabled Closed Caption support for CX23885 based cards during initialization. Signed-off-by:
-
Steven Toth authored
The card names are being truncated in the video4linux sys class name file. Prior to this patch they were shown as: cx23885[0] mpeg (Hauppauge WinT cx23885[0] video (Hauppauge WinT cx23885[0] vbi (Hauppauge WinT After this patch they are shown as: Hauppauge WinTV-HVR1850 (video) Hauppauge WinTV-HVR1850 (mpeg) Hauppauge WinTV-HVR1850 (vbi) Signed-off-by:
-
Steven Toth authored
Added three new control calls (g_std, querystd and g_ctrl) to the -417 driver. Also routed other controls through the main cx23885 driver meaning that the controls for the 417 and the raw video device all enter the driver code and are handled in a single place. Signed-off-by:
-
Steven Toth authored
First in a series of patches that adds support to the cx23885 driver for CX23888 analog video handling. Raw and MPEG video support is being added for the HVR1850 driver in the patch, and the following series of patches. Some basic cx23885 driver cleanup. Partly to add HVR1850 support and partly to allow -417.c V4L2 calls to be routed through thr driver core and handled in a single place. Make a number of core driver functions available to the -417.c driver to streamline the driver. Add the analog tuner ops definition so we can reach/tune the hardware when we need to. Added the tff field so 888 based cards (which have a weird field ordering issue) can be accomodated and worked around in the driver. Signed-off-by:
-
Steven Toth authored
The CX23888 (HVR1850 and other new cards) contain a DIF which is responsible for demodulating the audio and video. It's built directly into the CX23888 PCIe bridge. It needs to be enabled and disabled on a per-card and per-input basis. We pass this flag from the cx23885 core driver to the sub-device when we need the cx25840 driver to enable/disable with the DIF correctly. Signed-off-by:
-
Mauro Carvalho Chehab authored
Now, ops->info.type is handled inside the dvb_frontend core, only for DVBv3 calls, and according with the delivery system. So, drivers should not care or use it, otherwise, it may have issues with DVBv5 calls. The drivers that were still using it were detected via this small temporary hack: --- a/include/linux/dvb/frontend.h +++ b/include/linux/dvb/frontend.h @@ -29,13 +29,16 @@ #include <linux/types.h> typedef enum fe_type { +#if defined(__DVB_CORE__) || !defined (__KERNEL__) FE_QPSK, FE_QAM, FE_OFDM, FE_ATSC +#else +FE_FOOO +#endif } fe_type_t; - typedef enum fe_caps { FE_IS_STUPID = 0, FE_CAN_INVERSION_AUTO = 0x1, Signed-off-by: -
Mauro Carvalho Chehab authored
While the driver has support for both serial and parallel mode, There's was way to select serial mode via configuration. Add a config option for that, while keeping the default in serial mode. Also, at debug mode, it will now print a message when mpeg is enabled/disabled, and showing if parallel or serial mode were selected, helping developers to double-check if the DRX-K is at the right mode. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
get_if_frequency() is needed, in order to work with DRX-K. Signed-off-by: -
Mauro Carvalho Chehab authored
The per-delivery system tables are confusing. Add an extra table that explains them, and some dprintk calls, that allows to check if mt2063 driver is working as expected. Signed-off-by: -
Mauro Carvalho Chehab authored
Instead of printing it just for debug purposes, outputs the detected version at the logs. This may be useful if someone wants to report a problem. Signed-off-by: -
Mauro Carvalho Chehab authored
While here, improve a few debug messages that helped to track the issue and may be useful in the future. Signed-off-by: -
Mauro Carvalho Chehab authored
This also helps to identify when a device is not initialized, if the bridge doesn't return an error for a I2C failed transfer. Signed-off-by: -
Mauro Carvalho Chehab authored
Instead of crash, return -ENODEV, if the device is not poperly initialized. Also, give a second chance for it to initialize, at set_params calls. Signed-off-by: -
Mauro Carvalho Chehab authored
mt2063.c:1531:12: warning: variable 'ofout' set but not used [-Wunused-but-set-variable] mt2063.c:1531:6: warning: variable 'ofin' set but not used [-Wunused-but-set-variable] Signed-off-by: -
Mauro Carvalho Chehab authored
Several vars at set_parms functions were set, but unused. Remove them and change the logic to return -EINVAL if the analog set_param is used for digital mode. At the analog side, cleans the logic that sets the several analog standards. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by:
-
