Merge tag 'clk-renesas-for-v4.10-tag3' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-next

Pull more clk driver updates from Geert Uytterhoeven:

  - CSI2 and VIN clocks for R-Car M3-W,
  - Clock drivers for new RZ/G1M and RZ/G1E SoCs,
  - Minor bug fix for R-Car H3.

* tag 'clk-renesas-for-v4.10-tag3' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
  clk: renesas: cpg-mssr: Add R8A7745 support
  clk: renesas: cpg-mssr: Add R8A7743 support
  clk: renesas: cpg-mssr: Add common R-Car Gen2 support
  clk: renesas: r8a7795: Fix HDMI parent clock
  clk: renesas: r8a7796: Add VIN clocks
  clk: renesas: r8a7796: Add CSI2 clocks

Merge tag 'clk-renesas-for-v4.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-next

Pull Renesas clk driver updates from Geerty Uytterhoeven:

  - Add R-Car RST driver for obtaining mode pin state, and move the
    related functionality from platform code to DT,
  - Add r8a7743 and r8a7745 CPG Core Clock Definitions.

The commits here are intermingled with arm-soc material because
of the hard dependency we're breaking between mach code and
driver code. We're replacing that with a driver dependency
between the soc driver and the clk driver.

* tag 'clk-renesas-for-v4.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers: (25 commits)
  clk: renesas: Add r8a7745 CPG Core Clock Definitions
  clk: renesas: Add r8a7743 CPG Core Clock Definitions
  clk: renesas: rcar-gen2: Remove obsolete rcar_gen2_clocks_init()
  clk: renesas: r8a7779: Remove obsolete r8a7779_clocks_init()
  clk: renesas: r8a7778: Remove obsolete r8a7778_clocks_init()
  ARM: shmobile: rcar-gen2: Stop passing mode pins state to clock driver
  ARM: shmobile: r8a7779: Stop passing mode pins state to clock driver
  ARM: shmobile: r8a7778: Stop passing mode pins state to clock driver
  clk: renesas: rcar-gen3-cpg: Remove obsolete rcar_gen3_read_mode_pins()
  clk: renesas: r8a7796: Obtain mode pin values from R-Car RST driver
  clk: renesas: r8a7795: Obtain mode pin values from R-Car RST driver
  clk: renesas: rcar-gen2: Obtain mode pin values using RST driver
  clk: renesas: r8a7779: Obtain mode pin values from R-Car RST driver
  clk: renesas: r8a7778: Obtain mode pin values using R-Car RST driver
  arm64: renesas: r8a7796 dtsi: Add device node for RST module
  arm64: renesas: r8a7795 dtsi: Add device node for RST module
  ARM: dts: r8a7794: Add device node for RST module
  ARM: dts: r8a7793: Add device node for RST module
  ARM: dts: r8a7792: Add device node for RST module
  ARM: dts: r8a7791: Add device node for RST module
  ...

Some checkpatch warnings about spaces were missed and we didn't
mark two structs as static. Clean it up.

Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Merge tag 'sunxi-clk-for-4.10' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-next

Pull Allwinner clock changes from Maxime Ripard:

The usual patches from us, but most notably the introduction of the A64
clocks unit.

* tag 'sunxi-clk-for-4.10' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  clk: sunxi-ng: sun8i-h3: Set CLK_SET_RATE_PARENT for audio module clocks
  clk: sunxi-ng: sun8i-a23: Set CLK_SET_RATE_PARENT for audio module clocks
  clk: sunxi-ng: Add A64 clocks
  clk: sunxi-ng: Implement minimum for multipliers
  clk: sunxi-ng: Add minimums for all the relevant structures and clocks
  clk: sunxi-ng: Finish to convert to structures for arguments
  clk: sunxi-ng: Remove the use of rational computations
  clk: sunxi-ng: Rename the internal structures
  clk: sunxi: mod0: improve function-level documentation

Merge tag 'imx-clk-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into clk-next

Pull i.MX clock updates from Shawn Guo:

 - A patch series to fix the long standing issue with glitchy parent
   mux of ldb_di_clk, which can hang up LVDS display when ipu_di_clk
   is sourced from ldb_di_clk.
 - A patch to add imx6ull clock support on top of imx6ul clock driver.

* tag 'imx-clk-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  clk: imx: clk-imx6ul: add clk support for imx6ull
  clk: imx6: Fix procedure to switch the parent of LDB_DI_CLK
  clk: imx6: Make the LDB_DI0 and LDB_DI1 clocks read-only
  clk: imx6: Mask mmdc_ch1 handshake for periph2_sel and mmdc_ch1_axi_podf

* clk-fixes:
  clk: efm32gg: Pass correct type to hw provider registration
  clk: berlin: Pass correct type to hw provider registration
  clk: sunxi: Fix M factor computation for APB1
  clk: sunxi-ng: sun6i-a31: Force AHB1 clock to use PLL6 as parent

Merge tag 'sunxi-clk-fixes-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-fixes

Pull Allwinner clock fixes from Maxime Ripard:

Two fixes, one for the old clock code, one for the new implementation.

* tag 'sunxi-clk-fixes-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  clk: sunxi: Fix M factor computation for APB1
  clk: sunxi-ng: sun6i-a31: Force AHB1 clock to use PLL6 as parent

Dan Carpenter reports that we're passing a pointer to a pointer
here when we should just be passing a pointer. Pass the right
pointer so that the of_clk_hw_onecell_get() sees the appropriate
data pointer on its end.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: 9337631f ("clk: efm32gg: Migrate to clk_hw based OF and registration APIs")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Dan Carpenter reports that we're passing a pointer to a pointer
here when we should just be passing a pointer. Pass the right
pointer so that the of_clk_hw_onecell_get() sees the appropriate
data pointer on its end.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Jisheng Zhang <jszhang@marvell.com>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Fixes: f6475e29 ("clk: berlin: Migrate to clk_hw based registration and OF APIs")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

In current kernel config 'CONFIG_STUB_CLK_HI6220' is disabled by
default, as result stub clock driver has not been registered and
CPUFreq driver cannot work.

This patch is to enable stub clock driver in config for ARCH_HISI.
Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Merge tag 'v4.10-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next

Pull Rockchip clk driver updates from Heiko Stuebner:

PLL initialization for PLLs having both an integral and fractional mode
(rk3036, rk3399) does now take into account the mode that the PLL is
actually running at.

As always also some additional and optimized PLL rates for rk3066 and
rk3399, some additional clock ids for rk3066 and some additional clocks
on rk3399 are now sucessfully handled inside their respective driver.

* tag 'v4.10-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  clk: rockchip: Ignore frac divisor for PLL equivalence when it's unused
  clk: rockchip: remove more CLK_IGNORE_UNUSED for rk3399 clocktree
  clk: rockchip: add 400MHz to rk3066 clock rates table
  clk: rockchip: optimize 800MHz and 1GHz pll rates on RK3399
  clk: rockchip: Use clock ids for cpu and peri clocks on rk3066
  clk: rockchip: Add binding ids for cpu and peri clocks on rk3066
  clk: rockchip: add 533.25MHz to rk3399 clock rates table

Merge tag 'clk-renesas-for-v4.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-next

Pull Renesas clk driver updates from Geert Uytterhoeven:

  - SYS-DMAC, (H)SCIF, I2C, DRIF, and graphics related clocks for R-Car
    M3-W,
  - Minor fixes and cleanups.

* tag 'clk-renesas-for-v4.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
  clk: renesas: r8a7796: Add DU and LVDS clocks
  clk: renesas: r8a7796: Add VSP clocks
  clk: renesas: r8a7796: Add FCP clocks
  clk: renesas: cpg-mssr: Remove bogus commas from error messages
  clk: renesas: r8a7796: Add DRIF clock
  clk: renesas: cpg-mssr: Fix inverted debug check
  clk: renesas: rcar-gen3-cpg: Always use readl()/writel()
  clk: renesas: cpg-mssr: Always use readl()/writel()
  clk: renesas: r8a7796: Add I2C clocks
  clk: renesas: r8a7796: Add HSCIF clocks
  clk: renesas: r8a7796: Add SCIF clocks
  clk: renesas: r8a7796: Add SYS-DMAC clocks

imx6ull is the derived SoC from imx6ul
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Bai Ping <ping.bai@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

* clk-hisi:
  clk: hisilicon: add CRG driver for Hi3516CV300 SoC
  clk: hisilicon: add CRG driver for Hi3798CV200 SoC

Add CRG driver for Hi3516CV300 SoC. CRG(Clock and Reset
Generator) module generates clock and reset signals used
by other module blocks on SoC.
Signed-off-by: Pan Wen <wenpan@hisilicon.com>
Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Add CRG driver for Hi3798CV200 SoC. CRG(Clock and Reset
Generator) module generates clock and reset signals used
by other module blocks on SoC.
Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

The audio module clocks are supposed to be set according to the sample
rate of the audio stream. The audio PLL provides the clock signal for
these module clocks, and only it is freely tunable.

Set CLK_SET_RATE_PARENT for the audio module clocks so their users can
properly tune the clock rate.

Fixes: 0577e485 ("clk: sunxi-ng: Add H3 clocks")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

The audio module clocks are supposed to be set according to the sample
rate of the audio stream. The audio PLL provides the clock signal for
these module clocks, and only it is freely tunable.

Set CLK_SET_RATE_PARENT for the audio module clocks so their users can
properly tune the clock rate.

Fixes: 5690879d ("clk: sunxi-ng: Add A23 CCU")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

* clk-qcom-rpm:
  clk: qcom: Add support for RPM Clocks
  clk: qcom: Add support for SMD-RPM Clocks
  clk: qcom: Always add factor clock for xo clocks

This adds initial support for clocks controlled by the Resource
Power Manager (RPM) processor on some Qualcomm SoCs, which use
the qcom_rpm driver to communicate with RPM.
Such platforms are apq8064 and msm8960.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

This adds initial support for clocks controlled by the Resource
Power Manager (RPM) processor on some Qualcomm SoCs, which use
the qcom_smd_rpm driver to communicate with RPM.
Such platforms are msm8916, apq8084 and msm8974.

The RPM is a dedicated hardware engine for managing the shared
SoC resources in order to keep the lowest power profile. It
communicates with other hardware subsystems via shared memory
and accepts clock requests, aggregates the requests and turns
the clocks on/off or scales them on demand.

This driver is based on the codeaurora.org driver:
https://www.codeaurora.org/cgit/quic/la/kernel/msm-3.10/tree/drivers/clk/qcom/clock-rpm.cSigned-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
[sboyd@codeaurora.org: Remove useless braces for single line if]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Currently the RPM/RPM-SMD clock drivers do not register the xo clocks,
so we should always add factor clock. When we later add xo clocks support
into the drivers, we should update this function to skip registration.
By doing so we avoid any DT dependencies.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

* clk-qcom-8994:
  clk: qcom: Add support for msm8994 global clock controller
  dt-bindings: qcom: clocks: Add msm8994 clock bindings

The clock definition was ported from the Google 3.10 kernel tree to
work with the latest kernel.
Signed-off-by: Bastian Köcher <mail@kchr.de>
[jeremymc@redhat.com: created new commit of just dt-bindings]
Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com>
[sboyd@codeaurora.org: Tidy up commit text and Kconfig help]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com>
[sboyd@codeaurora.org: Dropped unused and incorrect GDSC defines]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Use the builtin_platform_driver() macro to make the code simpler.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Add RZ/G1E (R8A7745) Clock Pulse Generator / Module Standby and Software
Reset support, using the CPG/MSSR driver core and the common R-Car Gen2
(and RZ/G) code.

Based on the proof-of-concept R8A7791 CPG/MSSR patch by Geert
Uytterhoeven <geert+renesas@glider.be>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Add RZ/G1M (R8A7743) Clock Pulse Generator / Module Standby and Software
Reset support, using the CPG/MSSR driver core and the common R-Car Gen2
(and RZ/G) code.

Based on the proof-of-concept R8A7791 CPG/MSSR patch by Geert
Uytterhoeven <geert+renesas@glider.be>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Add the common R-Car Gen2 (and RZ/G) Clock Pulse Generator / Module
Standby and Software Reset support code, using the CPG/MSSR driver
core.

Based on the proof-of-concept R8A7791 CPG/MSSR patch by Geert
Uytterhoeven <geert+renesas@glider.be>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

The clocks on these boards run at 25 MHz, not 19.2 and 27 like
other platforms. Unfortunately I copy/pasted from other similar
SoCs but forgot this one is different. Fix it.

Fixes: a085f877 ("clk: qcom: Move cxo/pxo/xo into dt files")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

This function is passed an __iomem pointer but we use a u32
pointer instead which makes checkers like spare complain.
Furthermore, "lock" is a pretty poor variable name for a string
that will go into lockdep reports and the symbol isn't marked
static. Cleanup all this.
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

The : of the ?: operator should have a leading space.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
[sboyd@codeaurora.org: Also remove useless parenthesis]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

The new pxa2xx_determine_rate() function seems lacking in a few
regards:

- For an exact match or no match at all, the rate is uninitialized
  as reported by gcc -Wmaybe-unintialized:
   drivers/clk/pxa/clk-pxa.c: In function 'pxa2xx_determine_rate':
   drivers/clk/pxa/clk-pxa.c:243:5: error: 'rate' may be used uninitialized in this function

- If we get a non-exact match, the req->rate output is never set
  to the actual rate but remains at the requested rate.

- We should not attempt to print a rate if none could be found

This rewrites the logic accordingly.

Fixes: 9fe69429 ("clk: pxa: transfer CPU clock setting from pxa2xx-cpufreq")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

In infrasys and perifsys, there are many reset
control bits for kinds of modules. These bits are
used as actual reset controllers to be registered
into kernel's generic reset controller framework.
Signed-off-by: Shunli Wang <shunli.wang@mediatek.com>
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Tested-by: John Crispin <blogic@openwrt.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Add MT2701 clock support, include topckgen, apmixedsys,
infracfg, pericfg and subsystem clocks.
Signed-off-by: Shunli Wang <shunli.wang@mediatek.com>
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Tested-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

The dummy_clk_set_parent function is marked as 'static' but is
no longer referenced from the pxa25x clk driver after the last use
of the RATE_RO_OPS() macro is gone from this file, causing a
harmless build warning:

In file included from drivers/clk/pxa/clk-pxa25x.c:24:0:
drivers/clk/pxa/clk-pxa.h:146:12: error: 'dummy_clk_set_parent' defined but not used [-Werror=unused-function]

This marks the functon as 'inline', which lets the compiler simply
drop it when it gets referenced.

Fixes: 9fe69429 ("clk: pxa: transfer CPU clock setting from pxa2xx-cpufreq")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Correct HDMI parent clock so that the rate of the
HDMI clock is 1/4 rather than 1/2 of the rate of PLL1
as per the v0.52 (Jun, 15) manual.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Add r8a7743 and r8a7745 CPG Core Clock Definitions