- 17 Dec, 2019 38 commits
-
-
Filipe Manana authored
commit 53687007 upstream. In the fixup worker, if we fail to mark the range as delalloc in the io tree, we must release the previously reserved metadata, as well as update the outstanding extents counter for the inode, otherwise we leak metadata space. In pratice we can't return an error from btrfs_set_extent_delalloc(), which is just a wrapper around __set_extent_bit(), as for most errors __set_extent_bit() does a BUG_ON() (or panics which hits a BUG_ON() as well) and returning an -EEXIST error doesn't happen in this case since the exclusive bits parameter always has a value of 0 through this code path. Nevertheless, just fix the error handling in the fixup worker, in case one day __set_extent_bit() can return an error to this code path. Fixes: f3038ee3 ("btrfs: Handle btrfs_set_extent_delalloc failure in fixup worker") CC: stable@vger.kernel.org # 4.19+ Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Josef Bacik authored
commit baf320b9 upstream. We hit the following warning while running down a different problem [ 6197.175850] ------------[ cut here ]------------ [ 6197.185082] refcount_t: underflow; use-after-free. [ 6197.194704] WARNING: CPU: 47 PID: 966 at lib/refcount.c:190 refcount_sub_and_test_checked+0x53/0x60 [ 6197.521792] Call Trace: [ 6197.526687] __btrfs_release_delayed_node+0x76/0x1c0 [ 6197.536615] btrfs_kill_all_delayed_nodes+0xec/0x130 [ 6197.546532] ? __btrfs_btree_balance_dirty+0x60/0x60 [ 6197.556482] btrfs_clean_one_deleted_snapshot+0x71/0xd0 [ 6197.566910] cleaner_kthread+0xfa/0x120 [ 6197.574573] kthread+0x111/0x130 [ 6197.581022] ? kthread_create_on_node+0x60/0x60 [ 6197.590086] ret_from_fork+0x1f/0x30 [ 6197.597228] ---[ end trace 424bb7ae00509f56 ]--- This is because the free side drops the ref without the lock, and then takes the lock if our refcount is 0. So you can have nodes on the tree that have a refcount of 0. Fix this by zero'ing out that element in our temporary array so we don't try to kill it again. CC: stable@vger.kernel.org # 4.14+ Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
-
Josef Bacik authored
commit 3797136b upstream. While testing 5.2 we ran into the following panic [52238.017028] BUG: kernel NULL pointer dereference, address: 0000000000000001 [52238.105608] RIP: 0010:drop_buffers+0x3d/0x150 [52238.304051] Call Trace: [52238.308958] try_to_free_buffers+0x15b/0x1b0 [52238.317503] shrink_page_list+0x1164/0x1780 [52238.325877] shrink_inactive_list+0x18f/0x3b0 [52238.334596] shrink_node_memcg+0x23e/0x7d0 [52238.342790] ? do_shrink_slab+0x4f/0x290 [52238.350648] shrink_node+0xce/0x4a0 [52238.357628] balance_pgdat+0x2c7/0x510 [52238.365135] kswapd+0x216/0x3e0 [52238.371425] ? wait_woken+0x80/0x80 [52238.378412] ? balance_pgdat+0x510/0x510 [52238.386265] kthread+0x111/0x130 [52238.392727] ? kthread_create_on_node+0x60/0x60 [52238.401782] ret_from_fork+0x1f/0x30 The page we were trying to drop had a page->private, but had no page->mapping and so called drop_buffers, assuming that we had a buffer_head on the page, and then panic'ed trying to deref 1, which is our page->private for data pages. This is happening because we're truncating the free space cache while we're trying to load the free space cache. This isn't supposed to happen, and I'll fix that in a followup patch. However we still shouldn't allow those sort of mistakes to result in messing with pages that do not belong to us. So add the page->mapping check to verify that we still own this page after dropping and re-acquiring the page lock. This page being unlocked as: btrfs_readpage extent_read_full_page __extent_read_full_page __do_readpage if (!nr) unlock_page <-- nr can be 0 only if submit_extent_page returns an error CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
-
Yoshihiro Shimoda authored
commit 4bd5ead8 upstream. Since the role_store() uses strncmp(), it's possible to refer out-of-memory if the sysfs data size is smaller than strlen("host"). This patch fixes it by using sysfs_streq() instead of strncmp(). Reported-by:
Pavel Machek <pavel@denx.de> Fixes: 9bb86777 ("phy: rcar-gen3-usb2: add sysfs for usb role swap") Cc: <stable@vger.kernel.org> # v4.10+ Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
Thinh Nguyen authored
commit 2d7b78f5 upstream. Clear ep0's DWC3_EP_TRANSFER_STARTED flag if the END_TRANSFER command is completed. Otherwise, we can't start control transfer again after END_TRANSFER. Cc: stable@vger.kernel.org Signed-off-by:
Thinh Nguyen <thinhn@synopsys.com> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Tejas Joglekar authored
commit 8c7d4b7b upstream. This patch corrects the condition to kick the transfer without giving back the requests when either request has remaining data or when there are pending SGs. The && check was introduced during spliting up the dwc3_gadget_ep_cleanup_completed_requests() function. Fixes: f38e35dd ("usb: dwc3: gadget: split dwc3_gadget_ep_cleanup_completed_requests()") Cc: stable@vger.kernel.org Signed-off-by:
Tejas Joglekar <joglekar@synopsys.com> Signed-off-by:
-
Heikki Krogerus authored
commit 3c3caae4 upstream. The original ID that was added for Comet Lake PCH was actually for the -LP (low power) variant even though the constant for it said CMLH. Changing that while at it. Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by:
-
David Hildenbrand authored
commit 63341ab0 upstream. In case we have to migrate a ballon page to a newpage of another zone, the managed page count of both zones is wrong. Paired with memory offlining (which will adjust the managed page count), we can trigger kernel crashes and all kinds of different symptoms. One way to reproduce: 1. Start a QEMU guest with 4GB, no NUMA 2. Hotplug a 1GB DIMM and online the memory to ZONE_NORMAL 3. Inflate the balloon to 1GB 4. Unplug the DIMM (be quick, otherwise unmovable data ends up on it) 5. Observe /proc/zoneinfo Node 0, zone Normal pages free 16810 min 24848885473806 low 18471592959183339 high 36918337032892872 spanned 262144 present 262144 managed 18446744073709533486 6. Do anything that requires some memory (e.g., inflate the balloon some more). The OOM goes crazy and the system crashes [ 238.324946] Out of memory: Killed process 537 (login) total-vm:27584kB, anon-rss:860kB, file-rss:0kB, shmem-rss:00 [ 238.338585] systemd invoked oom-killer: gfp_mask=0x100cca(GFP_HIGHUSER_MOVABLE), order=0, oom_score_adj=0 [ 238.339420] CPU: 0 PID: 1 Comm: systemd Tainted: G D W 5.4.0-next-20191204+ #75 [ 238.340139] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu4 [ 238.341121] Call Trace: [ 238.341337] dump_stack+0x8f/0xd0 [ 238.341630] dump_header+0x61/0x5ea [ 238.341942] oom_kill_process.cold+0xb/0x10 [ 238.342299] out_of_memory+0x24d/0x5a0 [ 238.342625] __alloc_pages_slowpath+0xd12/0x1020 [ 238.343024] __alloc_pages_nodemask+0x391/0x410 [ 238.343407] pagecache_get_page+0xc3/0x3a0 [ 238.343757] filemap_fault+0x804/0xc30 [ 238.344083] ? ext4_filemap_fault+0x28/0x42 [ 238.344444] ext4_filemap_fault+0x30/0x42 [ 238.344789] __do_fault+0x37/0x1a0 [ 238.345087] __handle_mm_fault+0x104d/0x1ab0 [ 238.345450] handle_mm_fault+0x169/0x360 [ 238.345790] do_user_addr_fault+0x20d/0x490 [ 238.346154] do_page_fault+0x31/0x210 [ 238.346468] async_page_fault+0x43/0x50 [ 238.346797] RIP: 0033:0x7f47eba4197e [ 238.347110] Code: Bad RIP value. [ 238.347387] RSP: 002b:00007ffd7c0c1890 EFLAGS: 00010293 [ 238.347834] RAX: 0000000000000002 RBX: 000055d196a20a20 RCX: 00007f47eba4197e [ 238.348437] RDX: 0000000000000033 RSI: 00007ffd7c0c18c0 RDI: 0000000000000004 [ 238.349047] RBP: 00007ffd7c0c1c20 R08: 0000000000000000 R09: 0000000000000033 [ 238.349660] R10: 00000000ffffffff R11: 0000000000000293 R12: 0000000000000001 [ 238.350261] R13: ffffffffffffffff R14: 0000000000000000 R15: 00007ffd7c0c18c0 [ 238.350878] Mem-Info: [ 238.351085] active_anon:3121 inactive_anon:51 isolated_anon:0 [ 238.351085] active_file:12 inactive_file:7 isolated_file:0 [ 238.351085] unevictable:0 dirty:0 writeback:0 unstable:0 [ 238.351085] slab_reclaimable:5565 slab_unreclaimable:10170 [ 238.351085] mapped:3 shmem:111 pagetables:155 bounce:0 [ 238.351085] free:720717 free_pcp:2 free_cma:0 [ 238.353757] Node 0 active_anon:12484kB inactive_anon:204kB active_file:48kB inactive_file:28kB unevictable:0kB iss [ 238.355979] Node 0 DMA free:11556kB min:36kB low:48kB high:60kB reserved_highatomic:0KB active_anon:152kB inactivB [ 238.358345] lowmem_reserve[]: 0 2955 2884 2884 2884 [ 238.358761] Node 0 DMA32 free:2677864kB min:7004kB low:10028kB high:13052kB reserved_highatomic:0KB active_anon:0B [ 238.361202] lowmem_reserve[]: 0 0 72057594037927865 72057594037927865 72057594037927865 [ 238.361888] Node 0 Normal free:193448kB min:99395541895224kB low:73886371836733356kB high:147673348131571488kB reB [ 238.364765] lowmem_reserve[]: 0 0 0 0 0 [ 238.365101] Node 0 DMA: 7*4kB (U) 5*8kB (UE) 6*16kB (UME) 2*32kB (UM) 1*64kB (U) 2*128kB (UE) 3*256kB (UME) 2*512B [ 238.366379] Node 0 DMA32: 0*4kB 1*8kB (U) 2*16kB (UM) 2*32kB (UM) 2*64kB (UM) 1*128kB (U) 1*256kB (U) 1*512kB (U)B [ 238.367654] Node 0 Normal: 1985*4kB (UME) 1321*8kB (UME) 844*16kB (UME) 524*32kB (UME) 300*64kB (UME) 138*128kB (B [ 238.369184] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB [ 238.369915] 130 total pagecache pages [ 238.370241] 0 pages in swap cache [ 238.370533] Swap cache stats: add 0, delete 0, find 0/0 [ 238.370981] Free swap = 0kB [ 238.371239] Total swap = 0kB [ 238.371488] 1048445 pages RAM [ 238.371756] 0 pages HighMem/MovableOnly [ 238.372090] 306992 pages reserved [ 238.372376] 0 pages cma reserved [ 238.372661] 0 pages hwpoisoned In another instance (older kernel), I was able to observe this (negative page count :/): [ 180.896971] Offlined Pages 32768 [ 182.667462] Offlined Pages 32768 [ 184.408117] Offlined Pages 32768 [ 186.026321] Offlined Pages 32768 [ 187.684861] Offlined Pages 32768 [ 189.227013] Offlined Pages 32768 [ 190.830303] Offlined Pages 32768 [ 190.833071] Built 1 zonelists, mobility grouping on. Total pages: -36920272750453009 In another instance (older kernel), I was no longer able to start any process: [root@vm ~]# [ 214.348068] Offlined Pages 32768 [ 215.973009] Offlined Pages 32768 cat /proc/meminfo -bash: fork: Cannot allocate memory [root@vm ~]# cat /proc/meminfo -bash: fork: Cannot allocate memory Fix it by properly adjusting the managed page count when migrating if the zone changed. The managed page count of the zones now looks after unplug of the DIMM (and after deflating the balloon) just like before inflating the balloon (and plugging+onlining the DIMM). We'll temporarily modify the totalram page count. If this ever becomes a problem, we can fine tune by providing helpers that don't touch the totalram pages (e.g., adjust_zone_managed_page_count()). Please note that fixing up the managed page count is only necessary when we adjusted the managed page count when inflating - only if we don't have VIRTIO_BALLOON_F_DEFLATE_ON_OOM. With that feature, the managed page count is not touched when inflating/deflating. Reported-by:
Yumei Huang <yuhuang@redhat.com> Fixes: 3dcc0571 ("mm: correctly update zone->managed_pages") Cc: <stable@vger.kernel.org> # v3.11+ Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jiang Liu <liuj97@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Igor Mammedov <imammedo@redhat.com> Cc: virtualization@lists.linux-foundation.org Signed-off-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Miquel Raynal authored
commit 69c7f461 upstream. Any write with either dd or flashcp to a device driven by the spear_smi.c driver will pass through the spear_smi_cpy_toio() function. This function will get called for chunks of up to 256 bytes. If the amount of data is smaller, we may have a problem if the data length is not 4-byte aligned. In this situation, the kernel panics during the memcpy: # dd if=/dev/urandom bs=1001 count=1 of=/dev/mtd6 spear_smi_cpy_toio [620] dest c9070000, src c7be8800, len 256 spear_smi_cpy_toio [620] dest c9070100, src c7be8900, len 256 spear_smi_cpy_toio [620] dest c9070200, src c7be8a00, len 256 spear_smi_cpy_toio [620] dest c9070300, src c7be8b00, len 233 Unhandled fault: external abort on non-linefetch (0x808) at 0xc90703e8 [...] PC is at memcpy+0xcc/0x330 The above error occurs because the implementation of memcpy_toio() tries to optimize the number of I/O by writing 4 bytes at a time as much as possible, until there are less than 4 bytes left and then switches to word or byte writes. Unfortunately, the specification states about the Write Burst mode: "the next AHB Write request should point to the next incremented address and should have the same size (byte, half-word or word)" This means ARM architecture implementation of memcpy_toio() cannot reliably be used blindly here. Workaround this situation by update the write path to stick to byte access when the burst length is not multiple of 4. Fixes: f18dbbb1 ("mtd: ST SPEAr: Add SMI driver for serial NOR flash") Cc: Russell King <linux@armlinux.org.uk> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: stable@vger.kernel.org Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Tadeusz Struk authored
commit f1689114 upstream. devm_kcalloc() can fail and return NULL so we need to check for that. Cc: stable@vger.kernel.org Fixes: 58472f5c ("tpm: validate TPM 2.0 commands") Signed-off-by:
Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by:
Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by:
-
Pete Zaitcev authored
commit 19e6317d upstream. The problem arises because our read() function grabs a lock of the circular buffer, finds something of interest, then invokes copy_to_user() straight from the buffer, which in turn takes mm->mmap_sem. In the same time, the callback mon_bin_vma_fault() is invoked under mm->mmap_sem. It attempts to take the fetch lock and deadlocks. This patch does away with protecting of our page list with any semaphores, and instead relies on the kernel not close the device while mmap is active in a process. In addition, we prohibit re-sizing of a buffer while mmap is active. This way, when (now unlocked) fault is processed, it works with the page that is intended to be mapped-in, and not some other random page. Note that this may have an ABI impact, but hopefully no legitimate program is this wrong. Signed-off-by:
Pete Zaitcev <zaitcev@redhat.com> Reported-by: syzbot+56f9673bb4cdcbeb0e92@syzkaller.appspotmail.com Reviewed-by:
Alan Stern <stern@rowland.harvard.edu> Fixes: 46eb14a6 ("USB: fix usbmon BUG trigger") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191204203941.3503452b@suzdal.zaitcev.lanSigned-off-by:
-
Emiliano Ingrassia authored
commit 1cd17f7f upstream. Explicitly initialize URB structure urb_list field in usb_init_urb(). This field can be potentially accessed uninitialized and its initialization is coherent with the usage of list_del_init() in usb_hcd_unlink_urb_from_ep() and usb_giveback_urb_bh() and its explicit initialization in usb_hcd_submit_urb() error path. Signed-off-by:
Emiliano Ingrassia <ingrassia@epigenesys.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191127160355.GA27196@ingrassia.epigenesys.comSigned-off-by:
-
Johan Hovold authored
commit 3c11c4be upstream. Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 03270634 ("USB: Add ADU support for Ontrak ADU devices") Cc: stable <stable@vger.kernel.org> # 2.6.19 Signed-off-by:
Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191210112601.3561-3-johan@kernel.orgSigned-off-by:
-
Wen Yang authored
commit 1848a543 upstream. Free the sw structure only after we are done using it. This patch just moves the put_device() down a bit to avoid the use after free. Fixes: 5c54fcac ("usb: roles: Take care of driver module reference counting") Signed-off-by:
Wen Yang <wenyang@linux.alibaba.com> Reviewed-by:
Peter Chen <peter.chen@nxp.com> Cc: stable <stable@vger.kernel.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20191124142236.25671-1-wenyang@linux.alibaba.comSigned-off-by:
-
Johan Hovold authored
commit 7c5a2df3 upstream. Make sure to use the current alternate setting when looking up the endpoints on epic devices to avoid binding to an invalid interface. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 6e8cf775 ("USB: add EPIC support to the io_edgeport driver") Cc: stable <stable@vger.kernel.org> # 2.6.21 Signed-off-by:
-
Johan Hovold authored
commit 59920635 upstream. Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 09068c1a upstream. Make sure that the interrupt interface has an endpoint before trying to access its endpoint descriptors to avoid dereferencing a NULL pointer. The driver binds to the interrupt interface with interface number 0, but must not assume that this interface or its current alternate setting are the first entries in the corresponding configuration arrays. Fixes: b72458a8 ("[PATCH] USB: Eagle and ADI 930 usb adsl modem driver") Cc: stable <stable@vger.kernel.org> # 2.6.16 Signed-off-by:
-
Jean-Baptiste Maneyrol authored
commit 53eaa9c2 upstream. Temperature should be reported in milli-degrees, not degrees. Fix scale and offset values to use the correct unit. This is a fix for an issue that has been present for a long time. The fixes tag reflects the point at which the code last changed in a fashion that would make this fix patch no longer apply. Backports will be necessary to fix those elements that predate that patch. Fixes: 1615fe41 ("iio: imu: mpu6050: Fix FIFO layout for ICM20602") Cc: stable@vger.kernel.org Signed-off-by:
Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Chris Lesiak authored
commit 342a6928 upstream. The IIO_HUMIDITYRELATIVE channel was being incorrectly reported back as percent when it should have been milli percent. This is via an incorrect scale value being returned to userspace. Signed-off-by:
Chris Lesiak <chris.lesiak@licor.com> Acked-by:
Matt Ranostay <matt.ranostay@konsulko.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Nuno Sá authored
commit 4c35b7a5 upstream. The driver is defining debugfs entries by calling `adis16480_debugfs_init()`. However, those entries are attached to the iio_dev debugfs entry which won't exist if no debugfs_reg_access callback is provided. Fixes: 2f3abe6c ("iio:imu: Add support for the ADIS16480 and similar IMUs") Signed-off-by:
Nuno Sá <nuno.sa@analog.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
-
H. Nikolaus Schaller authored
commit 4f9007d6 upstream. Since v4.7 the dma initialization requires that there is a device tree property for "rx" and "tx" channels which is not provided by the pdata-quirks initialization. By conversion of the mmc3 setup to device tree this will finally allows to remove the OpenPandora wlan specific omap3 data-quirks. Fixes: 81eef6ca ("mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel") Signed-off-by:
H. Nikolaus Schaller <hns@goldelico.com> Cc: <stable@vger.kernel.org> # v4.7+ Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Mathias Nyman authored
commit 7ff11162 upstream. xhci driver claims it needs XHCI_TRUST_TX_LENGTH quirk for both Broadcom/Cavium and a Renesas xHC controllers. The quirk was inteded for handling false "success" complete event for transfers that had data left untransferred. These transfers should complete with "short packet" events instead. In these two new cases the false "success" completion is reported after a "short packet" if the TD consists of several TRBs. xHCI specs 4.10.1.1.2 say remaining TRBs should report "short packet" as well after the first short packet in a TD, but this issue seems so common it doesn't make sense to add the quirk for all vendors. Turn these events into short packets automatically instead. This gets rid of the "The WARN Successful completion on short TX for slot 1 ep 1: needs XHCI_TRUST_TX_LENGTH quirk" warning in many cases. Cc: <stable@vger.kernel.org> Reported-by:
Eli Billauer <eli.billauer@gmail.com> Reported-by:
Ard Biesheuvel <ardb@kernel.org> Tested-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-6-mathias.nyman@linux.intel.comSigned-off-by:
-
Kai-Heng Feng authored
commit 7c67cf66 upstream. I've recently observed failed xHCI suspend attempt on AMD Raven Ridge system: kernel: xhci_hcd 0000:04:00.4: WARN: xHC CMD_RUN timeout kernel: PM: suspend_common(): xhci_pci_suspend+0x0/0xd0 returns -110 kernel: PM: pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -110 kernel: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x150 returns -110 kernel: PM: Device 0000:04:00.4 failed to suspend async: error -110 Similar to commit ac343366 ("xhci: Increase STS_SAVE timeout in xhci_suspend()") we also need to increase the HALT timeout to make it be able to suspend again. Cc: <stable@vger.kernel.org> # 5.2+ Fixes: f7fac17c ("xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic()") Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Mika Westerberg authored
commit ce91f1a4 upstream. When xHCI is part of Alpine or Titan Ridge Thunderbolt controller and the xHCI device is hot-removed as a result of unplugging a dock for example, the driver leaks memory it allocates for xhci->usb3_rhub.psi and xhci->usb2_rhub.psi in xhci_add_in_port() as reported by kmemleak: unreferenced object 0xffff922c24ef42f0 (size 16): comm "kworker/u16:2", pid 178, jiffies 4294711640 (age 956.620s) hex dump (first 16 bytes): 21 00 0c 00 12 00 dc 05 23 00 e0 01 00 00 00 00 !.......#....... backtrace: [<000000007ac80914>] xhci_mem_init+0xcf8/0xeb7 [<0000000001b6d775>] xhci_init+0x7c/0x160 [<00000000db443fe3>] xhci_gen_setup+0x214/0x340 [<00000000fdffd320>] xhci_pci_setup+0x48/0x110 [<00000000541e1e03>] usb_add_hcd.cold+0x265/0x747 [<00000000ca47a56b>] usb_hcd_pci_probe+0x219/0x3b4 [<0000000021043861>] xhci_pci_probe+0x24/0x1c0 [<00000000b9231f25>] local_pci_probe+0x3d/0x70 [<000000006385c9d7>] pci_device_probe+0xd0/0x150 [<0000000070241068>] really_probe+0xf5/0x3c0 [<0000000061f35c0a>] driver_probe_device+0x58/0x100 [<000000009da11198>] bus_for_each_drv+0x79/0xc0 [<000000009ce45f69>] __device_attach+0xda/0x160 [<00000000df201aaf>] pci_bus_add_device+0x46/0x70 [<0000000088a1bc48>] pci_bus_add_devices+0x27/0x60 [<00000000ad9ee708>] pci_bus_add_devices+0x52/0x60 unreferenced object 0xffff922c24ef3318 (size 8): comm "kworker/u16:2", pid 178, jiffies 4294711640 (age 956.620s) hex dump (first 8 bytes): 34 01 05 00 35 41 0a 00 4...5A.. backtrace: [<000000007ac80914>] xhci_mem_init+0xcf8/0xeb7 [<0000000001b6d775>] xhci_init+0x7c/0x160 [<00000000db443fe3>] xhci_gen_setup+0x214/0x340 [<00000000fdffd320>] xhci_pci_setup+0x48/0x110 [<00000000541e1e03>] usb_add_hcd.cold+0x265/0x747 [<00000000ca47a56b>] usb_hcd_pci_probe+0x219/0x3b4 [<0000000021043861>] xhci_pci_probe+0x24/0x1c0 [<00000000b9231f25>] local_pci_probe+0x3d/0x70 [<000000006385c9d7>] pci_device_probe+0xd0/0x150 [<0000000070241068>] really_probe+0xf5/0x3c0 [<0000000061f35c0a>] driver_probe_device+0x58/0x100 [<000000009da11198>] bus_for_each_drv+0x79/0xc0 [<000000009ce45f69>] __device_attach+0xda/0x160 [<00000000df201aaf>] pci_bus_add_device+0x46/0x70 [<0000000088a1bc48>] pci_bus_add_devices+0x27/0x60 [<00000000ad9ee708>] pci_bus_add_devices+0x52/0x60 Fix this by calling kfree() for the both psi objects in xhci_mem_cleanup(). Cc: <stable@vger.kernel.org> # 4.4+ Fixes: 47189098 ("xhci: parse xhci protocol speed ID list for usb 3.1 usage") Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
-
Henry Lin authored
commit f2c710f7 upstream. Xhci driver cannot call pci_set_power_state() on non-pci xhci host controllers. For example, NVIDIA Tegra XHCI host controller which acts as platform device with XHCI_SPURIOUS_WAKEUP quirk set in some platform hits this issue during shutdown. Cc: <stable@vger.kernel.org> Fixes: 638298dc ("xhci: Fix spurious wakeups after S5 on Haswell") Signed-off-by:
Henry Lin <henryl@nvidia.com> Signed-off-by:
-
Johan Hovold authored
commit ed9ed5a8 upstream. Add missing endpoint-type sanity checks to probe. This specifically prevents a warning in USB core on URB submission when fuzzing USB descriptors. Signed-off-by:
-
Johan Hovold authored
commit 84f60ca7 upstream. The driver failed to initialise its receive-buffer pointer, something which could lead to an illegal free on late probe errors. Fix this by making sure to clear all driver data at allocation. Fixes: 2032e2c2 ("usb_gigaset: code cleanup") Cc: stable <stable@vger.kernel.org> # 2.6.33 Cc: Tilman Schmidt <tilman@imap.cc> Signed-off-by:
-
Johan Hovold authored
commit 53f35a39 upstream. Fix a general protection fault when accessing the endpoint descriptors which could be triggered by a malicious device due to missing sanity checks on the number of endpoints. Reported-by: syzbot+35b1c403a14f5c89eba7@syzkaller.appspotmail.com Fixes: 07dc1f9f ("[PATCH] isdn4linux: Siemens Gigaset drivers - M105 USB DECT adapter") Cc: stable <stable@vger.kernel.org> # 2.6.17 Cc: Hansjoerg Lipp <hjlipp@web.de> Cc: Tilman Schmidt <tilman@imap.cc> Signed-off-by:
-
Johan Hovold authored
commit c724f776 upstream. Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 2865d42c ("staging: r8712u: Add the new driver to the mainline kernel") Cc: stable <stable@vger.kernel.org> # 2.6.37 Signed-off-by:
-
Johan Hovold authored
commit 74ca3411 upstream. Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: c2478d39 ("staging: r8188eu: Add files for new driver - part 20") Cc: stable <stable@vger.kernel.org> # 3.12 Signed-off-by:
-
Kai-Heng Feng authored
commit e76b3bf7 upstream. On Dell WD15 dock, sometimes USB ethernet cannot be detected after plugging cable to the ethernet port, the hub and roothub get runtime resumed and runtime suspended immediately: ... [ 433.315169] xhci_hcd 0000:3a:00.0: hcd_pci_runtime_resume: 0 [ 433.315204] usb usb4: usb auto-resume [ 433.315226] hub 4-0:1.0: hub_resume [ 433.315239] xhci_hcd 0000:3a:00.0: Get port status 4-1 read: 0x10202e2, return 0x10343 [ 433.315264] usb usb4-port1: status 0343 change 0001 [ 433.315279] xhci_hcd 0000:3a:00.0: clear port1 connect change, portsc: 0x10002e2 [ 433.315293] xhci_hcd 0000:3a:00.0: Get port status 4-2 read: 0x2a0, return 0x2a0 [ 433.317012] xhci_hcd 0000:3a:00.0: xhci_hub_status_data: stopping port polling. [ 433.422282] xhci_hcd 0000:3a:00.0: Get port status 4-1 read: 0x10002e2, return 0x343 [ 433.422307] usb usb4-port1: do warm reset [ 433.422311] usb 4-1: device reset not allowed in state 8 [ 433.422339] hub 4-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 433.422346] xhci_hcd 0000:3a:00.0: Get port status 4-1 read: 0x10002e2, return 0x343 [ 433.422356] usb usb4-port1: do warm reset [ 433.422358] usb 4-1: device reset not allowed in state 8 [ 433.422428] xhci_hcd 0000:3a:00.0: set port remote wake mask, actual port 0 status = 0xf0002e2 [ 433.422455] xhci_hcd 0000:3a:00.0: set port remote wake mask, actual port 1 status = 0xe0002a0 [ 433.422465] hub 4-0:1.0: hub_suspend [ 433.422475] usb usb4: bus auto-suspend, wakeup 1 [ 433.426161] xhci_hcd 0000:3a:00.0: xhci_hub_status_data: stopping port polling. [ 433.466209] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.510204] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.554051] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.598235] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.642154] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.686204] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.730205] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.774203] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.818207] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.862040] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.862053] xhci_hcd 0000:3a:00.0: xhci_hub_status_data: stopping port polling. [ 433.862077] xhci_hcd 0000:3a:00.0: xhci_suspend: stopping port polling. [ 433.862096] xhci_hcd 0000:3a:00.0: // Setting command ring address to 0x8578fc001 [ 433.862312] xhci_hcd 0000:3a:00.0: hcd_pci_runtime_suspend: 0 [ 433.862445] xhci_hcd 0000:3a:00.0: PME# enabled [ 433.902376] xhci_hcd 0000:3a:00.0: restoring config space at offset 0xc (was 0x0, writing 0x20) [ 433.902395] xhci_hcd 0000:3a:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100403) [ 433.902490] xhci_hcd 0000:3a:00.0: PME# disabled [ 433.902504] xhci_hcd 0000:3a:00.0: enabling bus mastering [ 433.902547] xhci_hcd 0000:3a:00.0: // Setting command ring address to 0x8578fc001 [ 433.902649] pcieport 0000:00:1b.0: PME: Spurious native interrupt! [ 433.902839] xhci_hcd 0000:3a:00.0: Port change event, 4-1, id 3, portsc: 0xb0202e2 [ 433.902842] xhci_hcd 0000:3a:00.0: resume root hub [ 433.902845] xhci_hcd 0000:3a:00.0: handle_port_status: starting port polling. [ 433.902877] xhci_hcd 0000:3a:00.0: xhci_resume: starting port polling. [ 433.902889] xhci_hcd 0000:3a:00.0: xhci_hub_status_data: stopping port polling. [ 433.902891] xhci_hcd 0000:3a:00.0: hcd_pci_runtime_resume: 0 [ 433.902919] usb usb4: usb wakeup-resume [ 433.902942] usb usb4: usb auto-resume [ 433.902966] hub 4-0:1.0: hub_resume ... As Mathias pointed out, the hub enters Cold Attach Status state and requires a warm reset. However usb_reset_device() bails out early when the device is in suspended state, as its callers port_event() and hub_event() don't always resume the device. Since there's nothing wrong to reset a suspended device, allow usb_reset_device() to do so to solve the issue. Signed-off-by:
-
Oliver Neukum authored
commit 65cc8bf9 upstream. Document which flags work storage, UAS or both Signed-off-by:
Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191114112758.32747-4-oneukum@suse.comSigned-off-by:
-
Oliver Neukum authored
commit 335cbbd5 upstream. There is no need to ignore this flag. We should be as close to storage in that regard as makes sense, so honor flags whose cost is tiny. Signed-off-by:
-
Oliver Neukum authored
commit bff000ca upstream. Copy the support over from usb-storage to get feature parity Signed-off-by:
-
Arnd Bergmann authored
commit 4adc0423 upstream. v4l2_compat_ioctl32() is the function that calls into v4l2_file_operations->compat_ioctl32(), so setting that back to the same function leads to a trivial endless loop, followed by a kernel stack overrun. Remove the incorrect assignment. Cc: stable@vger.kernel.org Fixes: 7472c1c6 ("[media] media: venus: vdec: add video decoder files") Fixes: aaaa93ed ("[media] media: venus: venc: add video encoder files") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by:
-
Quinn Tran authored
commit dd322b7f upstream. This patch fixes driver unload hang by removing msleep() Fixes: d7459527 ("scsi: qla2xxx: Add multiple queue pair functionality.") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191105150657.8092-5-hmadhani@marvell.comReviewed-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
Quinn Tran <qutran@marvell.com> Signed-off-by:
Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Gustavo A. R. Silva authored
commit 66d1b0c0 upstream. Remove pointer dereference after free. pci_pool_free doesn't care about contents of td. It's just a void* for it Addresses-Coverity-ID: 1091173 ("Use after free") Cc: stable@vger.kernel.org Acked-by:
Michal Nazarewicz <mina86@mina86.com> Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Link: https://lore.kernel.org/r/20191106202821.GA20347@embeddedorSigned-off-by:
-
Wei Yongjun authored
commit 093edc2b upstream. The driver allocates the spinlock but not initialize it. Use spin_lock_init() on it to initialize it correctly. This is detected by Coccinelle semantic patch. Fixes: 1a1c851b ("usb: gadget: configfs: fix concurrent issue between composite APIs") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Cc: stable <stable@vger.kernel.org> Reviewed-by:
-
- 13 Dec, 2019 2 commits
-
-
Greg Kroah-Hartman authored
-
YueHaibing authored
commit c93ad133 upstream. If register_snap_client fails in atalk_init, error code should be set, otherwise it will triggers NULL pointer dereference while unloading module. Fixes: 9804501f ("appletalk: Fix potential NULL pointer dereference in unregister_snap_client") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
