- 24 Apr, 2017 24 commits
-
-
Michał Zegan authored
The mmc host was added in meson_mmc_probe, but never removed in meson_mmc_remove. Fix that by removing the host before deallocating other resources. Signed-off-by: Michał Zegan <webczat@webczatnet.pl> Tested-by: Michał Zegan <webczat@webczatnet.pl> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Wolfram Sang authored
After we received the dataend interrupt, R1 response register carries the value from the automatically generated stop command. Report that info back to the MMC block layer, so we will be notified in case of e.g. ECC errors which happened during the last transfer. Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Wolfram Sang authored
Halting the kernel on an unsupported stop command seems overkill, report the error and say what we already did (due to autocmd12) instead. Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Wolfram Sang authored
Making sure we match the actual register names. Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Wolfram Sang authored
Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Wolfram Sang authored
The current code assumes that DMA is finished before SD access end is flagged. Thus, it schedules the 'dma_complete' tasklet in the SD card interrupt routine when DATAEND is set. The assumption is not safe, though. Even by mounting an SD card, it can be seen that sometimes DMA complete is first, sometimes DATAEND. It seems they are usually close enough timewise to not cause problems. However, a customer reported that with CMD53 sometimes things really break apart. As a result, the BSP has a patch which introduces flags for both events and makes sure both flags are set before scheduling the tasklet. The customer accepted the patch, yet it doesn't seem a proper upstream solution to me. This patch refactors the code to replace the tasklet with already existing and more lightweight mechanisms. First of all, we set the callback in a DMA descriptor to automatically get notified when DMA is done. In the callback, we then use a completion to make sure the SD access has already ended. Then, we proceed as before. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Alexey Khoroshilov authored
There is no check if clk_prepare_enable() succeed in sdhci_pxav2_probe(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Heiner Kallweit authored
Replace timeout magic numbers with proper constants. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Heiner Kallweit authored
Struct mmc_command includes a reference to the related mmc_request. Therefore we don't have to store mrq separately in struct meson_host. And we can remove some now unneeded WARN_ON's. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Heiner Kallweit authored
Config values which are not changed during runtime we can set in the probe function already. The block size setting is overwritten later in meson_mmc_start_cmd anyway if needed, so it doesn't harm if we remove this setting in meson_mmc_set_ios. In addition write config register only if configuration changed. Don't change the location of clock initialization as in an earlier version of the patch, this change causes a hang. This issue was reported and fix suggested by: Helmut Klein <hgkr.klein@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Heiner Kallweit authored
CLK core does a deep copy of init.name, therefore it's fully ok to provide a local variable. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Heiner Kallweit authored
The condition should be "if (ret)" as the disable/unprepare is supposed to be executed if the previous command fails. In addition adjust the error path in probe to properly deal with the case that cfg_div_clk can be registered successfully but enable/prepare fails. In this case we shouldn't call clk_disable_unprepare. Reported-by: Michał Zegan <webczat_200@poczta.onet.pl> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Heiner Kallweit authored
Member mux_parent isn't used outside meson_mmc_clk_init. So remove it and replace it with a local variable in meson_mmc_clk_init. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Heiner Kallweit authored
Because the DT requires a fixed number of mux parent clocks, variable mux_parent_count can be replaced with constant MUX_CLK_NUM_PARENTS, so remove it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Heiner Kallweit authored
Member ocr_mask is never used and member irq we can replace with a local variable in meson_mmc_probe. So let's remove both members. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Heiner Kallweit authored
The return value of meson_mmc_request_done and meson_mmc_read_resp isn't used, so make both functions return void. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Heiner Kallweit authored
Core ensures that there are no commands with cmd->data being set and nothing to transfer. And we don't have to reset bit CMD_CFG_DATA_NUM because cmd_cfg was zero-initialized and this bit isn't set. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Shawn Lin authored
Too much condition iteration makes the code less readable. Slightly improve it. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Shawn Lin authored
No functional change intended. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Shawn Lin authored
No need to declar it there, remove it. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Shawn Lin authored
No functional change intended. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Shawn Lin authored
No functional change intended. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Shawn Lin authored
No functional change intended. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Shawn Lin authored
Just use the readl_poll_timeout{_atomic} to avold open coding them. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
- 23 Apr, 2017 4 commits
-
-
Linus Torvalds authored
-
git://git.infradead.org/linux-ubifsLinus Torvalds authored
Pull UBI/UBIFS fixes from Richard Weinberger: "This contains fixes for issues in both UBI and UBIFS: - more O_TMPFILE fallout - RENAME_WHITEOUT regression due to a mis-merge - memory leak in ubifs_mknod() - power-cut problem in UBI's update volume feature" * tag 'upstream-4.11-rc7' of git://git.infradead.org/linux-ubifs: ubifs: Fix O_TMPFILE corner case in ubifs_link() ubifs: Fix RENAME_WHITEOUT support ubifs: Fix debug messages for an invalid filename in ubifs_dump_inode ubifs: Fix debug messages for an invalid filename in ubifs_dump_node ubifs: Remove filename from debug messages in ubifs_readdir ubifs: Fix memory leak in error path in ubifs_mknod ubi/upd: Always flush after prepared for an update
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull RAS fix from Thomas Gleixner: "The MCE atomic notifier callchain invokes callbacks which might sleep. Convert it to a blocking notifier and prevent calls from atomic context" * 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Make the MCE notifier a blocking one
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Thomas Gleixner: "The (hopefully) final fix for the irq affinity spreading logic" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/affinity: Fix calculating vectors to assign
-
- 21 Apr, 2017 12 commits
-
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull nfsd bugfix from Bruce Fields: "Fix a 4.11 regression that triggers a BUG() on an attempt to use an unsupported NFSv4 compound op" * tag 'nfsd-4.11-2' of git://linux-nfs.org/~bfields/linux: nfsd: fix oops on unsupported operation
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Don't race in IPSEC dumps, from Yuejie Shi. 2) Verify lengths properly in IPSEC reqeusts, from Herbert Xu. 3) Fix out of bounds access in ipv6 segment routing code, from David Lebrun. 4) Don't write into the header of cloned SKBs in smsc95xx driver, from James Hughes. 5) Several other drivers have this bug too, fix them. From Eric Dumazet. 6) Fix access to uninitialized data in TC action cookie code, from Wolfgang Bumiller. 7) Fix double free in IPV6 segment routing, again from David Lebrun. 8) Don't let userspace set the RTF_PCPU flag, oops. From David Ahern. 9) Fix use after free in qrtr code, from Dan Carpenter. 10) Don't double-destroy devices in ip6mr code, from Nikolay Aleksandrov. 11) Don't pass out-of-range TX queue indices into drivers, from Tushar Dave. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (30 commits) netpoll: Check for skb->queue_mapping ip6mr: fix notification device destruction bpf, doc: update bpf maintainers entry net: qrtr: potential use after free in qrtr_sendmsg() bpf: Fix values type used in test_maps net: ipv6: RTF_PCPU should not be settable from userspace gso: Validate assumption of frag_list segementation kaweth: use skb_cow_head() to deal with cloned skbs ch9200: use skb_cow_head() to deal with cloned skbs lan78xx: use skb_cow_head() to deal with cloned skbs sr9700: use skb_cow_head() to deal with cloned skbs cx82310_eth: use skb_cow_head() to deal with cloned skbs smsc75xx: use skb_cow_head() to deal with cloned skbs ipv6: sr: fix double free of skb after handling invalid SRH MAINTAINERS: Add "B:" field for networking. net sched actions: allocate act cookie early qed: Fix issue in populating the PFC config paramters. qed: Fix possible system hang in the dcbnl-getdcbx() path. qed: Fix sending an invalid PFC error mask to MFW. qed: Fix possible error in populating max_tc field. ...
-
Tushar Dave authored
Reducing real_num_tx_queues needs to be in sync with skb queue_mapping otherwise skbs with queue_mapping greater than real_num_tx_queues can be sent to the underlying driver and can result in kernel panic. One such event is running netconsole and enabling VF on the same device. Or running netconsole and changing number of tx queues via ethtool on same device. e.g. Unable to handle kernel NULL pointer dereference tsk->{mm,active_mm}->context = 0000000000001525 tsk->{mm,active_mm}->pgd = fff800130ff9a000 \|/ ____ \|/ "@'/ .. \`@" /_| \__/ |_\ \__U_/ kworker/48:1(475): Oops [#1] CPU: 48 PID: 475 Comm: kworker/48:1 Tainted: G OE 4.11.0-rc3-davem-net+ #7 Workqueue: events queue_process task: fff80013113299c0 task.stack: fff800131132c000 TSTATE: 0000004480e01600 TPC: 00000000103f9e3c TNPC: 00000000103f9e40 Y: 00000000 Tainted: G OE TPC: <ixgbe_xmit_frame_ring+0x7c/0x6c0 [ixgbe]> g0: 0000000000000000 g1: 0000000000003fff g2: 0000000000000000 g3: 0000000000000001 g4: fff80013113299c0 g5: fff8001fa6808000 g6: fff800131132c000 g7: 00000000000000c0 o0: fff8001fa760c460 o1: fff8001311329a50 o2: fff8001fa7607504 o3: 0000000000000003 o4: fff8001f96e63a40 o5: fff8001311d77ec0 sp: fff800131132f0e1 ret_pc: 000000000049ed94 RPC: <set_next_entity+0x34/0xb80> l0: 0000000000000000 l1: 0000000000000800 l2: 0000000000000000 l3: 0000000000000000 l4: 000b2aa30e34b10d l5: 0000000000000000 l6: 0000000000000000 l7: fff8001fa7605028 i0: fff80013111a8a00 i1: fff80013155a0780 i2: 0000000000000000 i3: 0000000000000000 i4: 0000000000000000 i5: 0000000000100000 i6: fff800131132f1a1 i7: 00000000103fa4b0 I7: <ixgbe_xmit_frame+0x30/0xa0 [ixgbe]> Call Trace: [00000000103fa4b0] ixgbe_xmit_frame+0x30/0xa0 [ixgbe] [0000000000998c74] netpoll_start_xmit+0xf4/0x200 [0000000000998e10] queue_process+0x90/0x160 [0000000000485fa8] process_one_work+0x188/0x480 [0000000000486410] worker_thread+0x170/0x4c0 [000000000048c6b8] kthread+0xd8/0x120 [0000000000406064] ret_from_fork+0x1c/0x2c [0000000000000000] (null) Disabling lock debugging due to kernel taint Caller[00000000103fa4b0]: ixgbe_xmit_frame+0x30/0xa0 [ixgbe] Caller[0000000000998c74]: netpoll_start_xmit+0xf4/0x200 Caller[0000000000998e10]: queue_process+0x90/0x160 Caller[0000000000485fa8]: process_one_work+0x188/0x480 Caller[0000000000486410]: worker_thread+0x170/0x4c0 Caller[000000000048c6b8]: kthread+0xd8/0x120 Caller[0000000000406064]: ret_from_fork+0x1c/0x2c Caller[0000000000000000]: (null) Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
Andrey Konovalov reported a BUG caused by the ip6mr code which is caused because we call unregister_netdevice_many for a device that is already being destroyed. In IPv4's ipmr that has been resolved by two commits long time ago by introducing the "notify" parameter to the delete function and avoiding the unregister when called from a notifier, so let's do the same for ip6mr. The trace from Andrey: ------------[ cut here ]------------ kernel BUG at net/core/dev.c:6813! invalid opcode: 0000 [#1] SMP KASAN Modules linked in: CPU: 1 PID: 1165 Comm: kworker/u4:3 Not tainted 4.11.0-rc7+ #251 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: netns cleanup_net task: ffff880069208000 task.stack: ffff8800692d8000 RIP: 0010:rollback_registered_many+0x348/0xeb0 net/core/dev.c:6813 RSP: 0018:ffff8800692de7f0 EFLAGS: 00010297 RAX: ffff880069208000 RBX: 0000000000000002 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88006af90569 RBP: ffff8800692de9f0 R08: ffff8800692dec60 R09: 0000000000000000 R10: 0000000000000006 R11: 0000000000000000 R12: ffff88006af90070 R13: ffff8800692debf0 R14: dffffc0000000000 R15: ffff88006af90000 FS: 0000000000000000(0000) GS:ffff88006cb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe7e897d870 CR3: 00000000657e7000 CR4: 00000000000006e0 Call Trace: unregister_netdevice_many.part.105+0x87/0x440 net/core/dev.c:7881 unregister_netdevice_many+0xc8/0x120 net/core/dev.c:7880 ip6mr_device_event+0x362/0x3f0 net/ipv6/ip6mr.c:1346 notifier_call_chain+0x145/0x2f0 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x51/0x90 net/core/dev.c:1647 call_netdevice_notifiers net/core/dev.c:1663 rollback_registered_many+0x919/0xeb0 net/core/dev.c:6841 unregister_netdevice_many.part.105+0x87/0x440 net/core/dev.c:7881 unregister_netdevice_many net/core/dev.c:7880 default_device_exit_batch+0x4fa/0x640 net/core/dev.c:8333 ops_exit_list.isra.4+0x100/0x150 net/core/net_namespace.c:144 cleanup_net+0x5a8/0xb40 net/core/net_namespace.c:463 process_one_work+0xc04/0x1c10 kernel/workqueue.c:2097 worker_thread+0x223/0x19c0 kernel/workqueue.c:2231 kthread+0x35e/0x430 kernel/kthread.c:231 ret_from_fork+0x31/0x40 arch/x86/entry/entry_64.S:430 Code: 3c 32 00 0f 85 70 0b 00 00 48 b8 00 02 00 00 00 00 ad de 49 89 47 78 e9 93 fe ff ff 49 8d 57 70 49 8d 5f 78 eb 9e e8 88 7a 14 fe <0f> 0b 48 8b 9d 28 fe ff ff e8 7a 7a 14 fe 48 b8 00 00 00 00 00 RIP: rollback_registered_many+0x348/0xeb0 RSP: ffff8800692de7f0 ---[ end trace e0b29c57e9b3292c ]--- Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Add various related files that have been missing under BPF entry covering essential parts of its infrastructure and also add myself as co-maintainer. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
If skb_pad() fails then it frees the skb so we should check for errors. Fixes: bdabad3e ("net: Add Qualcomm IPC router") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Miller authored
Maps of per-cpu type have their value element size adjusted to 8 if it is specified smaller during various map operations. This makes test_maps as a 32-bit binary fail, in fact the kernel writes past the end of the value's array on the user's stack. To be quite honest, I think the kernel should reject creation of a per-cpu map that doesn't have a value size of at least 8 if that's what the kernel is going to silently adjust to later. If the user passed something smaller, it is a sizeof() calcualtion based upon the type they will actually use (just like in this testcase code) in later calls to the map operations. Fixes: df570f57 ("samples/bpf: unit test for BPF_MAP_TYPE_PERCPU_ARRAY") Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org>
-
David Ahern authored
Andrey reported a fault in the IPv6 route code: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 1 PID: 4035 Comm: a.out Not tainted 4.11.0-rc7+ #250 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff880069809600 task.stack: ffff880062dc8000 RIP: 0010:ip6_rt_cache_alloc+0xa6/0x560 net/ipv6/route.c:975 RSP: 0018:ffff880062dced30 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: ffff8800670561c0 RCX: 0000000000000006 RDX: 0000000000000003 RSI: ffff880062dcfb28 RDI: 0000000000000018 RBP: ffff880062dced68 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff880062dcfb28 R14: dffffc0000000000 R15: 0000000000000000 FS: 00007feebe37e7c0(0000) GS:ffff88006cb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000205a0fe4 CR3: 000000006b5c9000 CR4: 00000000000006e0 Call Trace: ip6_pol_route+0x1512/0x1f20 net/ipv6/route.c:1128 ip6_pol_route_output+0x4c/0x60 net/ipv6/route.c:1212 ... Andrey's syzkaller program passes rtmsg.rtmsg_flags with the RTF_PCPU bit set. Flags passed to the kernel are blindly copied to the allocated rt6_info by ip6_route_info_create making a newly inserted route appear as though it is a per-cpu route. ip6_rt_cache_alloc sees the flag set and expects rt->dst.from to be set - which it is not since it is not really a per-cpu copy. The subsequent call to __ip6_dst_alloc then generates the fault. Fix by checking for the flag and failing with EINVAL. Fixes: d52d3997 ("ipv6: Create percpu rt6_info") Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ilan Tayari authored
Commit 07b26c94 ("gso: Support partial splitting at the frag_list pointer") assumes that all SKBs in a frag_list (except maybe the last one) contain the same amount of GSO payload. This assumption is not always correct, resulting in the following warning message in the log: skb_segment: too many frags For example, mlx5 driver in Striding RQ mode creates some RX SKBs with one frag, and some with 2 frags. After GRO, the frag_list SKBs end up having different amounts of payload. If this frag_list SKB is then forwarded, the aforementioned assumption is violated. Validate the assumption, and fall back to software GSO if it not true. Change-Id: Ia03983f4a47b6534dd987d7a2aad96d54d46d212 Fixes: 07b26c94 ("gso: Support partial splitting at the frag_list pointer") Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Eric Dumazet says: ==================== net: use skb_cow_head() to deal with cloned skbs James Hughes found an issue with smsc95xx driver. Same problematic code is found in other drivers. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
We can use skb_cow_head() to properly deal with clones, especially the ones coming from TCP stack that allow their head being modified. This avoids a copy. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: James Hughes <james.hughes@raspberrypi.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
We need to ensure there is enough headroom to push extra header, but we also need to check if we are allowed to change headers. skb_cow_head() is the proper helper to deal with this. Fixes: 4a476bd6 ("usbnet: New driver for QinHeng CH9200 devices") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: James Hughes <james.hughes@raspberrypi.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-