- 11 Jun, 2014 9 commits
-
-
Mathias Nyman authored
commit 5dc2808c upstream. Lists of endpoints are stored for bandwidth calculation for roothub ports. Make sure we remove all endpoints from the list before the whole device, containing its endpoints list_head stuctures, is freed. This used to be done in the wrong order in xhci_mem_cleanup(), and triggered an oops in resume from S4 (hibernate). Tested-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
NeilBrown authored
commit 3991b31e upstream. If mddev->ro is set, md_to_sync will (correctly) abort. However in that case MD_RECOVERY_INTR isn't set. If a RESHAPE had been requested, then ->finish_reshape() will be called and it will think the reshape was successful even though nothing happened. Normally a resync will not be requested if ->ro is set, but if an array is stopped while a reshape is on-going, then when the array is started, the reshape will be restarted. If the array is also set read-only at this point, the reshape will instantly appear to success, resulting in data corruption. Consequently, this patch is suitable for any -stable kernel. Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Lai Jiangshan authored
commit 6acbfb96 upstream. Lai found that: WARNING: CPU: 1 PID: 13 at arch/x86/kernel/smp.c:124 native_smp_send_reschedule+0x2d/0x4b() ... migration_cpu_stop+0x1d/0x22 was caused by set_cpus_allowed_ptr() assuming that cpu_active_mask is always a sub-set of cpu_online_mask. This isn't true since 5fbd036b ("sched: Cleanup cpu_active madness"). So set active and online at the same time to avoid this particular problem. Fixes: 5fbd036b ("sched: Cleanup cpu_active madness") Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael wang <wangyun@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Toshi Kani <toshi.kani@hp.com> Link: http://lkml.kernel.org/r/53758B12.8060609@cn.fujitsu.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Andrey Ryabinin authored
commit 537094b6 upstream. According to arm procedure call standart r2 register is call-cloberred. So after the result of x expression was put into r2 any following function call in p may overwrite r2. To fix this, the result of p expression must be saved to the temporary variable before the assigment x expression to __r2. Signed-off-by:
Andrey Ryabinin <a.ryabinin@samsung.com> Reviewed-by:
Nicolas Pitre <nico@linaro.org> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Naoya Horiguchi authored
commit 3e030ecc upstream. When a memory error happens on an in-use page or (free and in-use) hugepage, the victim page is isolated with its refcount set to one. When you try to unpoison it later, unpoison_memory() calls put_page() for it twice in order to bring the page back to free page pool (buddy or free hugepage list). However, if another memory error occurs on the page which we are unpoisoning, memory_failure() returns without releasing the refcount which was incremented in the same call at first, which results in memory leak and unconsistent num_poisoned_pages statistics. This patch fixes it. Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Peter Zijlstra authored
commit 46ce0fe9 upstream. When removing a (sibling) event we do: raw_spin_lock_irq(&ctx->lock); perf_group_detach(event); raw_spin_unlock_irq(&ctx->lock); <hole> perf_remove_from_context(event); raw_spin_lock_irq(&ctx->lock); ... raw_spin_unlock_irq(&ctx->lock); Now, assuming the event is a sibling, it will be 'unreachable' for things like ctx_sched_out() because that iterates the groups->siblings, and we just unhooked the sibling. So, if during <hole> we get ctx_sched_out(), it will miss the event and not call event_sched_out() on it, leaving it programmed on the PMU. The subsequent perf_remove_from_context() call will find the ctx is inactive and only call list_del_event() to remove the event from all other lists. Hereafter we can proceed to free the event; while still programmed! Close this hole by moving perf_group_detach() inside the same ctx->lock region(s) perf_remove_from_context() has. The condition on inherited events only in __perf_event_exit_task() is likely complete crap because non-inherited events are part of groups too and we're tearing down just the same. But leave that for another patch. Most-likely-Fixes: e03a9a55 ("perf: Change close() semantics for group events") Reported-by:
Vince Weaver <vincent.weaver@maine.edu> Tested-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Peter Zijlstra authored
commit 0819b2e3 upstream. Vince reported that using a large sample_period (one with bit 63 set) results in wreckage since while the sample_period is fundamentally unsigned (negative periods don't make sense) the way we implement things very much rely on signed logic. So limit sample_period to 63 bits to avoid tripping over this. Reported-by:
-
Jiri Olsa authored
commit 39af6b16 upstream. The perf cpu offline callback takes down all cpu context events and releases swhash->swevent_hlist. This could race with task context software event being just scheduled on this cpu via perf_swevent_add while cpu hotplug code already cleaned up event's data. The race happens in the gap between the cpu notifier code and the cpu being actually taken down. Note that only cpu ctx events are terminated in the perf cpu hotplug code. It's easily reproduced with: $ perf record -e faults perf bench sched pipe while putting one of the cpus offline: # echo 0 > /sys/devices/system/cpu/cpu1/online Console emits following warning: WARNING: CPU: 1 PID: 2845 at kernel/events/core.c:5672 perf_swevent_add+0x18d/0x1a0() Modules linked in: CPU: 1 PID: 2845 Comm: sched-pipe Tainted: G W 3.14.0+ #256 Hardware name: Intel Corporation Montevina platform/To be filled by O.E.M., BIOS AMVACRB1.86C.0066.B00.0805070703 05/07/2008 0000000000000009 ffff880077233ab8 ffffffff81665a23 0000000000200005 0000000000000000 ffff880077233af8 ffffffff8104732c 0000000000000046 ffff88007467c800 0000000000000002 ffff88007a9cf2a0 0000000000000001 Call Trace: [<ffffffff81665a23>] dump_stack+0x4f/0x7c [<ffffffff8104732c>] warn_slowpath_common+0x8c/0xc0 [<ffffffff8104737a>] warn_slowpath_null+0x1a/0x20 [<ffffffff8110fb3d>] perf_swevent_add+0x18d/0x1a0 [<ffffffff811162ae>] event_sched_in.isra.75+0x9e/0x1f0 [<ffffffff8111646a>] group_sched_in+0x6a/0x1f0 [<ffffffff81083dd5>] ? sched_clock_local+0x25/0xa0 [<ffffffff811167e6>] ctx_sched_in+0x1f6/0x450 [<ffffffff8111757b>] perf_event_sched_in+0x6b/0xa0 [<ffffffff81117a4b>] perf_event_context_sched_in+0x7b/0xc0 [<ffffffff81117ece>] __perf_event_task_sched_in+0x43e/0x460 [<ffffffff81096f1e>] ? put_lock_stats.isra.18+0xe/0x30 [<ffffffff8107b3c8>] finish_task_switch+0xb8/0x100 [<ffffffff8166a7de>] __schedule+0x30e/0xad0 [<ffffffff81172dd2>] ? pipe_read+0x3e2/0x560 [<ffffffff8166b45e>] ? preempt_schedule_irq+0x3e/0x70 [<ffffffff8166b45e>] ? preempt_schedule_irq+0x3e/0x70 [<ffffffff8166b464>] preempt_schedule_irq+0x44/0x70 [<ffffffff816707f0>] retint_kernel+0x20/0x30 [<ffffffff8109e60a>] ? lockdep_sys_exit+0x1a/0x90 [<ffffffff812a4234>] lockdep_sys_exit_thunk+0x35/0x67 [<ffffffff81679321>] ? sysret_check+0x5/0x56 Fixing this by tracking the cpu hotplug state and displaying the WARN only if current cpu is initialized properly. Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Jiri Olsa <jolsa@redhat.com> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 6227cb00 upstream. The check at the beginning of cpupri_find() makes sure that the task_pri variable does not exceed the cp->pri_to_cpu array length. But that length is CPUPRI_NR_PRIORITIES not MAX_RT_PRIO, where it will miss the last two priorities in that array. As task_pri is computed from convert_prio() which should never be bigger than CPUPRI_NR_PRIORITIES, if the check should cause a panic if it is hit. Reported-by:
Mike Galbraith <umgwanakikbuti@gmail.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
- 07 Jun, 2014 31 commits
-
-
Greg Kroah-Hartman authored
-
Thomas Gleixner authored
commit 54a21788 upstream. The current implementation of lookup_pi_state has ambigous handling of the TID value 0 in the user space futex. We can get into the kernel even if the TID value is 0, because either there is a stale waiters bit or the owner died bit is set or we are called from the requeue_pi path or from user space just for fun. The current code avoids an explicit sanity check for pid = 0 in case that kernel internal state (waiters) are found for the user space address. This can lead to state leakage and worse under some circumstances. Handle the cases explicit: Waiter | pi_state | pi->owner | uTID | uODIED | ? [1] NULL | --- | --- | 0 | 0/1 | Valid [2] NULL | --- | --- | >0 | 0/1 | Valid [3] Found | NULL | -- | Any | 0/1 | Invalid [4] Found | Found | NULL | 0 | 1 | Valid [5] Found | Found | NULL | >0 | 1 | Invalid [6] Found | Found | task | 0 | 1 | Valid [7] Found | Found | NULL | Any | 0 | Invalid [8] Found | Found | task | ==taskTID | 0/1 | Valid [9] Found | Found | task | 0 | 0 | Invalid [10] Found | Found | task | !=taskTID | 0/1 | Invalid [1] Indicates that the kernel can acquire the futex atomically. We came came here due to a stale FUTEX_WAITERS/FUTEX_OWNER_DIED bit. [2] Valid, if TID does not belong to a kernel thread. If no matching thread is found then it indicates that the owner TID has died. [3] Invalid. The waiter is queued on a non PI futex [4] Valid state after exit_robust_list(), which sets the user space value to FUTEX_WAITERS | FUTEX_OWNER_DIED. [5] The user space value got manipulated between exit_robust_list() and exit_pi_state_list() [6] Valid state after exit_pi_state_list() which sets the new owner in the pi_state but cannot access the user space value. [7] pi_state->owner can only be NULL when the OWNER_DIED bit is set. [8] Owner and user space value match [9] There is no transient state which sets the user space TID to 0 except exit_robust_list(), but this is indicated by the FUTEX_OWNER_DIED bit. See [4] [10] There is no transient state which leaves owner and user space TID out of sync. Signed-off-by:
-
Thomas Gleixner authored
commit 13fbca4c upstream. If the owner died bit is set at futex_unlock_pi, we currently do not cleanup the user space futex. So the owner TID of the current owner (the unlocker) persists. That's observable inconsistant state, especially when the ownership of the pi state got transferred. Clean it up unconditionally. Signed-off-by:
-
Thomas Gleixner authored
commit b3eaa9fc upstream. We need to protect the atomic acquisition in the kernel against rogue user space which sets the user space futex to 0, so the kernel side acquisition succeeds while there is existing state in the kernel associated to the real owner. Verify whether the futex has waiters associated with kernel state. If it has, return -EINVAL. The state is corrupted already, so no point in cleaning it up. Subsequent calls will fail as well. Not our problem. [ tglx: Use futex_top_waiter() and explain why we do not need to try restoring the already corrupted user space state. ] Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: Will Drewry <wad@chromium.org> Signed-off-by:
-
Thomas Gleixner authored
futex-prevent-requeue-pi-on-same-futex.patch futex: Forbid uaddr == uaddr2 in futex_requeue(..., requeue_pi=1) commit e9c243a5 upstream. If uaddr == uaddr2, then we have broken the rule of only requeueing from a non-pi futex to a pi futex with this call. If we attempt this, then dangling pointers may be left for rt_waiter resulting in an exploitable condition. This change brings futex_requeue() in line with futex_wait_requeue_pi() which performs the same check as per commit 6f7b0a2a ("futex: Forbid uaddr == uaddr2 in futex_wait_requeue_pi()") [ tglx: Compare the resulting keys as well, as uaddrs might be different depending on the mapping ] Fixes CVE-2014-3153. Reported-by: Pinkie Pie Signed-off-by:
Will Drewry <wad@chromium.org> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Stanislaw Gruszka authored
commit 21f8aaee upstream. We check tid->sched without a lock taken on ath_tx_aggr_sleep(). That is race condition which can result of doing list_del(&tid->list) twice (second time with poisoned list node) and cause crash like shown below: [424271.637220] BUG: unable to handle kernel paging request at 00100104 [424271.637328] IP: [<f90fc072>] ath_tx_aggr_sleep+0x62/0xe0 [ath9k] ... [424271.639953] Call Trace: [424271.639998] [<f90f6900>] ? ath9k_get_survey+0x110/0x110 [ath9k] [424271.640083] [<f90f6942>] ath9k_sta_notify+0x42/0x50 [ath9k] [424271.640177] [<f809cfef>] sta_ps_start+0x8f/0x1c0 [mac80211] [424271.640258] [<c10f730e>] ? free_compound_page+0x2e/0x40 [424271.640346] [<f809e915>] ieee80211_rx_handlers+0x9d5/0x2340 [mac80211] [424271.640437] [<c112f048>] ? kmem_cache_free+0x1d8/0x1f0 [424271.640510] [<c1345a84>] ? kfree_skbmem+0x34/0x90 [424271.640578] [<c10fc23c>] ? put_page+0x2c/0x40 [424271.640640] [<c1345a84>] ? kfree_skbmem+0x34/0x90 [424271.640706] [<c1345a84>] ? kfree_skbmem+0x34/0x90 [424271.640787] [<f809dde3>] ? ieee80211_rx_handlers_result+0x73/0x1d0 [mac80211] [424271.640897] [<f80a07a0>] ieee80211_prepare_and_rx_handle+0x520/0xad0 [mac80211] [424271.641009] [<f809e22d>] ? ieee80211_rx_handlers+0x2ed/0x2340 [mac80211] [424271.641104] [<c13846ce>] ? ip_output+0x7e/0xd0 [424271.641182] [<f80a1057>] ieee80211_rx+0x307/0x7c0 [mac80211] [424271.641266] [<f90fa6ee>] ath_rx_tasklet+0x88e/0xf70 [ath9k] [424271.641358] [<f80a0f2c>] ? ieee80211_rx+0x1dc/0x7c0 [mac80211] [424271.641445] [<f90f82db>] ath9k_tasklet+0xcb/0x130 [ath9k] Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=70551Reported-and-tested-by:
Max Sydorenko <maxim.stargazer@gmail.com> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> [bwh: Backported to 3.2: - Adjust context - Use spin_unlock_bh() directly] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> [gkh: backported to 3.4: - adjust context - back out bwh's spinlock change] Signed-off-by:
-
Alan Cox authored
commit 8a55ade7 upstream. Allocate a structure not a pointer to it ! Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Marc Dionne authored
commit d8dc3494 upstream. On a system with a logitech wireless keyboard/mouse and DMA-API debugging enabled, this warning appears at boot: kernel: WARNING: at lib/dma-debug.c:929 check_for_stack.part.12+0x70/0xa7() kernel: Hardware name: MS-7593 kernel: uhci_hcd 0000:00:1d.1: DMA-API: device driver maps memory fromstack [addr=ffff8801b0079c29] Make logi_dj_recv_query_paired_devices and logi_dj_recv_switch_to_dj_mode use a structure allocated with kzalloc rather than a stack based one. Signed-off-by:
Marc Dionne <marc.c.dionne@gmail.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Joe Lawrence authored
commit a26d5ecb upstream. Don't allocate and track PCIe ASPM state when "pcie_aspm=off" is specified on the kernel command line. Based-on-patch-from: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by:
Joe Lawrence <joe.lawrence@stratus.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
David Bulkow <david.bulkow@stratus.com> Acked-by:
Myron Stowe <myron.stowe@redhat.com> [wyj: Backported to 3.4: context adjust] Signed-off-by:
Yijing Wang <wangyijing@huawei.com> Signed-off-by:
-
Wei Liu authored
commit 9ecd1a75 upstream. The maximum packet including header that can be handled by netfront / netback wire format is 65535. Reduce gso_max_size accordingly. Drop skb and print warning when skb->len > 65535. This can 1) save the effort to send malformed packet to netback, 2) help spotting misconfiguration of netfront in the future. Signed-off-by:
Wei Liu <wei.liu2@citrix.com> Acked-by:
Ian Campbell <ian.campbell@citrix.com> Signed-off-by:
David S. Miller <davem@davemloft.net> [bwh: Backported to 3.2: adjust context] Signed-off-by:
Qiang Huang <h.huangqiang@huawei.com> Signed-off-by:
-
Joe Perches authored
commit 3a3bfb61 upstream. __ratelimit() can be considered an inverted bool test because it returns true when not ratelimited. Several tests in the kernel tree use this __ratelimit() function incorrectly. No net_ratelimit uses are incorrect currently though. Most uses of net_ratelimit are to log something via printk or pr_<level>. In order to minimize the uses of net_ratelimit, and to start standardizing the code style used for __ratelimit() and net_ratelimit(), add a net_ratelimited_function() macro and net_<level>_ratelimited() logging macros similar to pr_<level>_ratelimited that use the global net_ratelimit instead of a static per call site "struct ratelimit_state". Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Gerald Schaefer authored
commit 9dda2769 upstream. Some s390 crypto algorithms incorrectly use the crypto_tfm structure to store private data. As the tfm can be shared among multiple threads, this can result in data corruption. This patch fixes aes-xts by moving the xts and pcc parameter blocks from the tfm onto the stack (48 + 96 bytes). Signed-off-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Oliver Hartkopp authored
commit 2fea6cd3 upstream. This patch fixes the issue that the sja1000_interrupt() function may have returned IRQ_NONE without processing the optional pre_irq() and post_irq() function before. Further the irq processing counter 'n' is moved to the end of the while statement to return correct IRQ_[NONE|HANDLED] values at error conditions. Reported-by:
Wolfgang Grandegger <wg@grandegger.com> Acked-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> [bwh: Backported to 3.2: s/SJA1000_IER/REG_IER/; s/SJA1000_IR/REG_IR/] Signed-off-by:
-
Johan Hovold authored
commit ad5066d4 upstream. Make sure to honour gpio polarity also at remove so that the backlight is actually disabled on boards with active-low enable pin. Signed-off-by:
Johan Hovold <jhovold@gmail.com> Acked-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Brian Norris authored
commit 778d226a upstream. This patch fixes two memory errors: 1. During a probe failure (in mtd_device_parse_register?) the command buffer would not be freed. 2. The command buffer's size is determined based on the 'fast_read' boolean, but the assignment of fast_read is made after this allocation. Thus, the buffer may be allocated "too small". To fix the first, just switch to the devres version of kzalloc. To fix the second, increase MAX_CMD_SIZE unconditionally. It's not worth saving a byte to fiddle around with the conditions here. This problem was reported by Yuhang Wang a while back. Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Reported-by:
Yuhang Wang <wangyuhang2014@gmail.com> Reviewed-by:
Sourav Poddar <sourav.poddar@ti.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Herbert Xu authored
commit f262f0f5 upstream. The cbc-aes-s390 algorithm incorrectly places the IV in the tfm data structure. As the tfm is shared between multiple threads, this introduces a possibility of data corruption. This patch fixes this by moving the parameter block containing the IV and key onto the stack (the block is 48 bytes long). The same bug exists elsewhere in the s390 crypto system and they will be fixed in subsequent patches. Signed-off-by:
-
Felix Fietkau authored
commit 6329b8d9 upstream. If an Ad-Hoc node receives packets with the Cell ID or its own MAC address as source address, it hits a WARN_ON in sta_info_insert_check() With many packets, this can massively spam the logs. One way that this can easily happen is through having Cisco APs in the area with rouge AP detection and countermeasures enabled. Such Cisco APs will regularly send fake beacons, disassoc and deauth packets that trigger these warnings. To fix this issue, drop such spoofed packets early in the rx path. Reported-by:
Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> [bwh: Backported to 3.2: use compare_ether_addr() instead of ether_addr_equal()] Signed-off-by:
-
Marcelo Tosatti authored
commit 7e6d72c1 upstream. Booting a 64-vcpu KVM guest, with CONFIG_PREEMPT_VOLUNTARY, can result in a soft lockup: BUG: soft lockup - CPU#41 stuck for 67s! [setfont:1505] RIP: 0010:[<ffffffff812c48da>] [<ffffffff812c48da>] vgacon_do_font_op.clone.0+0x1ba/0x550 This is due to the 8192 (cmapsz) IO operations taking longer than expected due to lock contention in QEMU. Add conditional resched points in between writes allowing other tasks to execute. Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> [bwh: Backported to 3.2: add #include <linux/sched.h>, already present upstream] Signed-off-by:
-
Hauke Mehrtens authored
commit 693026ef upstream. When b43 gets build into the kernel and it should use bcma we have to ensure that bcma was also build into the kernel and not as a module. In this patch this is also done for SSB, although you can not build b43 without ssb support for now. This fixes a build problem reported by Randy Dunlap in 5187EB95.2060605@infradead.org Reported-By:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
Shane Huang authored
commit b996ac90 upstream. To add AMD CZ SMBus controller device ID. [bhelgaas: drop pci_ids.h update] Signed-off-by:
Shane Huang <shane.huang@amd.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Reviewed-by:
Jean Delvare <khali@linux-fr.org> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Johannes Berg authored
commit c8157976 upstream. If a P2P-Device is present and another virtual interface triggers the connection work, the system crash because it tries to check if the P2P-Device's netdev (which doesn't exist) is up. Skip any wdevs that have no netdev to fix this. Reported-by:
YanBo <dreamfly281@gmail.com> Signed-off-by:
-
Jiri Kosina authored
commit 10b3a32d upstream. Commit 902c098a ("random: use lockless techniques in the interrupt path") turned IRQ path from being spinlock protected into lockless cmpxchg-retry update. That commit removed r->lock serialization between crediting entropy bits from IRQ context and accounting when extracting entropy on userspace read path, but didn't turn the r->entropy_count reads/updates in account() to use cmpxchg as well. It has been observed, that under certain circumstances this leads to read() on /dev/urandom to return 0 (EOF), as r->entropy_count gets corrupted and becomes negative, which in turn results in propagating 0 all the way from account() to the actual read() call. Convert the accounting code to be the proper lockless counterpart of what has been partially done by 902c098a. Signed-off-by:
-
Ben Hutchings authored
commit 94e0104b upstream. Commit 1619f441 'rapidio/tsi721: fix bug in MSI interrupt handling' (commit 1ccc819d upstream) makes the MSI handler disable and re-enable interrupts. When re-enabling interrupts, we should set the same flags as were originally set, but this changed in Linux 3.5 so the flags are now inconsistent in 3.2. In fact, the extra flag isn't even defined in 3.2. Remove the extra flag from the MSI handler. Reported-by:
Steve Conklin <steve.conklin@canonical.com> Signed-off-by:
-
Alexandre Bounine authored
commit 1ccc819d upstream. Fix bug in MSI interrupt handling which causes loss of event notifications. Typical indication of lost MSI interrupts are stalled message and doorbell transfers between RapidIO endpoints. To avoid loss of MSI interrupts all interrupts from the device must be disabled on entering the interrupt handler routine and re-enabled when exiting it. Re-enabling device interrupts will trigger new MSI message(s) if Tsi721 registered new events since entering interrupt handler routine. This patch is applicable to kernel versions starting from v3.2. Signed-off-by:
Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by:
-
Maxim Mikityanskiy authored
commit 51c94491 upstream. Fix memory leak - don't forget to kfree ACPI object when returning from msi_wmi_notify() after suppressing key event. Signed-off-by:
Maxim Mikityanskiy <maxtram95@gmail.com> Acked-by:
Anisse Astier <anisse@astier.eu> Signed-off-by:
Lee, Chun-Yi <jlee@suse.com> Signed-off-by:
Matthew Garrett <matthew.garrett@nebula.com> Signed-off-by:
-
Jakub Kicinski authored
commit f01fc1a8 upstream. ixgbe_notify_dca cannot be called before driver registration because it expects driver's klist_devices to be allocated and initialized. While on it make sure debugfs files are removed when registration fails. Signed-off-by:
Jakub Kicinski <jakub.kicinski@intel.com> Tested-by:
Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Laxman Dewangan authored
commit 132c803f upstream. NVIDIA's Tegra SoC allows read/write of controller register only if controller clock is enabled. System hangs if read/write happens to registers without enabling clock. clk_prepare_enable() can be fail due to unknown reason and hence adding check for return value of this function. If this function success then only access register otherwise return to caller with error. Signed-off-by:
Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by:
Stephen Warren <swarren@nvidia.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> [bwh: Backported to 3.2: - Adjust context - Keep calling clk_enable() directly] Signed-off-by:
-
Samuel Thibault authored
commit cfd75701 upstream. Speech synthesis beginners need a low speech rate, and trained people want a high speech rate. A medium speech rate is thus actually not a good default for neither. Since trained people will typically know how to change the rate, better default for a low speech rate, which beginners can grasp and learn how to increase it afterwards This was agreed with users on the speakup mailing list. Signed-off-by:
Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by:
-
James Ralston authored
commit 389cd784 upstream. This patch adds the IDE-mode SATA Device IDs for the Intel Lynx Point-LP PCH Signed-off-by:
James Ralston <james.d.ralston@intel.com> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
-
Linus Walleij authored
commit 3399cfb5 upstream. Commit e7e034e1 ("drivers/rtc/rtc-pl031.c: fix the missing operation on enable") accidentally broke the ST variants of PL031. The bit that is being poked as "clockwatch" enable bit for the ST variants does the work of bit 0 on this variant. Bit 0 is used for a clock divider on the ST variants, and setting it to 1 will affect timekeeping in a very bad way. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Mian Yousaf KAUKAB <mian.yousaf.kaukab@stericsson.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Maia Kozheva authored
commit fd7b9270 upstream. D-Link DWA-125/B1 is a relatively new USB Wi-Fi adapter, using a Ralink chipset supported by the rt2800usb driver. Currently, to work around the problem (it's missing in all present kernel versions, up to and including 3.7.x), I had to add this to /etc/rc.local: echo 2001 3c1e >> /sys/bus/usb/drivers/rt2800usb/new_id After that, the device works without problems. Been using it for over a week with no bugs in sight. The attached patch is trivial and simply adds the new USB ID to the list of devices handled by rt2800usb. Signed-off-by:
Maia Kozheva <sikon@ubuntu.com> Signed-off-by:
-
