Fix a potential memory leak in the error handling of test_aead_speed(). In case
crypto_alloc_aead() fails, the function returns without going through the
centralized cleanup path. Reported by Coverity - CID 1163870.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fix a potential memory leak in the error handling of test_aead_speed(). In case
the size check on the associate data length parameter fails, the function goes
through the wrong exit label. Reported by Coverity - CID 1163870.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In case hash key is bigger than algorithm block size, it is hashed.
In this case, memory is allocated to keep this hash in hashed_key.
hashed_key has to be freed on the key_dma dma mapping error path.
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

pm_runtime_get_sync may not always succeed depending on SoC involved.
So handle the error appropriately ensuring usage_count is accurate in
case of failure.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Reported-by: Joachim Eastwood <manabian@gmail.com>
Tested-by: Joachim Eastwood <manabian@gmail.com>
Acked-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The driver for the "Picochip picoXcell true random number generator" was
added in v2.6.39. Its Kconfig symbol has always depended on
PICOXCELL_PC3X3. But that Kconfig symbol has never been part of the
tree. This means this driver has never been buildable. Let's remove it.
It can be re-added if its dependencies are actually part of the tree.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range()  or pci_enable_msi_exact()
and pci_enable_msix_range() or pci_enable_msix_exact()
interfaces.
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Patch adds large test-vectors for SHA algorithms for better code coverage in
optimized assembly implementations. Empty test-vectors are also added, as some
crypto drivers appear to have special case handling for empty input.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

- The 4-byte sg_mid_buf is located in the middle of the coherence memory
sg_cpu. Don't call dma_map_single to get its physical address. Get the its
base physical address from the physical address of sg_cpu instead.
- Should set up the dma descriptor data after the 4-byte sg_mid_buf is
filled in completely from next sg buffer.
- memory copy from sg buffer should be done via virtual address.
- Remove unused reference to blackfin header
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

in case of multiple crc devices are probed.
Call platform_set_drvdata() before adding new CRC device into the list.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Move architecture independant crc header file out of the blackfin folder.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

HW_RANDOM_ATMEL should not only default to ARCH_AT91, it should depend
on it. This driver is useless on other architectures.

Likewise, HW_RANDOM_EXYNOS should depend on ARCH_EXYNOS, as it it
useless on other architectures.

Also set the default to HW_RANDOM for the few architecture-specific
drivers which didn't have it yet, for consistency.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This makes configuration more convenient IMHO, and avoids having to
repeat the dependency on HW_RANDOM for every single driver.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

UML_RANDOM is the only hardware random number generator option which
does not depend on HW_RANDOM. Having it in the middle of the other
options breaks the alignment in "make menuconfig". Move it at the last
position to avoid that.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use devm_ioremap_resource() because devm_request_and_ioremap() is
obsoleted by devm_ioremap_resource().
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Joel Fernandes <joelf@ti.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This adds test cases for SHA-1, SHA-224, SHA-256 and AES-CCM with an input size
that is an exact multiple of the block size. The reason is that some
implementations use a different code path for these cases.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch replaces rcu_assign_pointer(x, NULL) with RCU_INIT_POINTER(x, NULL)

The rcu_assign_pointer() ensures that the initialization of a structure
is carried out before storing a pointer to that structure.
And in the case of the NULL pointer, there is no structure to initialize.
So, rcu_assign_pointer(p, NULL) can be safely converted to RCU_INIT_POINTER(p, NULL)
Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The internal key isn't actually in big-endian format so let's switch
to u128 which also happens to allow us to remove a sparse warning.

Based on suggestion by Ard Biesheuvel.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

Pull crypto updates from Herbert Xu:
 "Here is the crypto update for 3.15:
   - Added 3DES driver for OMAP4/AM43xx
   - Added AVX2 acceleration for SHA
   - Added hash-only AEAD algorithms in caam
   - Removed tegra driver as it is not functioning and the hardware is
     too slow
   - Allow blkcipher walks over AEAD (needed for ARM)
   - Fixed unprotected FPU/SSE access in ghash-clmulni-intel
   - Fixed highmem crash in omap-sham
   - Add (zero entropy) randomness when initialising hardware RNGs
   - Fixed unaligned ahash comletion functions
   - Added soft module depedency for crc32c for initrds that use crc32c"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (60 commits)
  crypto: ghash-clmulni-intel - use C implementation for setkey()
  crypto: x86/sha1 - reduce size of the AVX2 asm implementation
  crypto: x86/sha1 - fix stack alignment of AVX2 variant
  crypto: x86/sha1 - re-enable the AVX variant
  crypto: sha - SHA1 transform x86_64 AVX2
  crypto: crypto_wq - Fix late crypto work queue initialization
  crypto: caam - add missing key_dma unmap
  crypto: caam - add support for aead null encryption
  crypto: testmgr - add aead null encryption test vectors
  crypto: export NULL algorithms defines
  crypto: caam - remove error propagation handling
  crypto: hash - Simplify the ahash_finup implementation
  crypto: hash - Pull out the functions to save/restore request
  crypto: hash - Fix the pointer voodoo in unaligned ahash
  crypto: caam - Fix first parameter to caam_init_rng
  crypto: omap-sham - Map SG pages if they are HIGHMEM before accessing
  crypto: caam - Dynamic memory allocation for caam_rng_ctx object
  crypto: allow blkcipher walks over AEAD data
  crypto: remove direct blkcipher_walk dependency on transform
  hwrng: add randomness to system from rng sources
  ...

Pull security subsystem updates from James Morris:
 "Apart from reordering the SELinux mmap code to ensure DAC is called
  before MAC, these are minor maintenance updates"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (23 commits)
  selinux: correctly label /proc inodes in use before the policy is loaded
  selinux: put the mmap() DAC controls before the MAC controls
  selinux: fix the output of ./scripts/get_maintainer.pl for SELinux
  evm: enable key retention service automatically
  ima: skip memory allocation for empty files
  evm: EVM does not use MD5
  ima: return d_name.name if d_path fails
  integrity: fix checkpatch errors
  ima: fix erroneous removal of security.ima xattr
  security: integrity: Use a more current logging style
  MAINTAINERS: email updates and other misc. changes
  ima: reduce memory usage when a template containing the n field is used
  ima: restore the original behavior for sending data with ima template
  Integrity: Pass commname via get_task_comm()
  fs: move i_readcount
  ima: use static const char array definitions
  security: have cap_dentry_init_security return error
  ima: new helper: file_inode(file)
  kernel: Mark function as static in kernel/seccomp.c
  capability: Use current logging styles
  ...

Pull networking updates from David Miller:
 "Here is my initial pull request for the networking subsystem during
  this merge window:

   1) Support for ESN in AH (RFC 4302) from Fan Du.

   2) Add full kernel doc for ethtool command structures, from Ben
      Hutchings.

   3) Add BCM7xxx PHY driver, from Florian Fainelli.

   4) Export computed TCP rate information in netlink socket dumps, from
      Eric Dumazet.

   5) Allow IPSEC SA to be dumped partially using a filter, from Nicolas
      Dichtel.

   6) Convert many drivers to pci_enable_msix_range(), from Alexander
      Gordeev.

   7) Record SKB timestamps more efficiently, from Eric Dumazet.

   8) Switch to microsecond resolution for TCP round trip times, also
      from Eric Dumazet.

   9) Clean up and fix 6lowpan fragmentation handling by making use of
      the existing inet_frag api for it's implementation.

  10) Add TX grant mapping to xen-netback driver, from Zoltan Kiss.

  11) Auto size SKB lengths when composing netlink messages based upon
      past message sizes used, from Eric Dumazet.

  12) qdisc dumps can take a long time, add a cond_resched(), From Eric
      Dumazet.

  13) Sanitize netpoll core and drivers wrt.  SKB handling semantics.
      Get rid of never-used-in-tree netpoll RX handling.  From Eric W
      Biederman.

  14) Support inter-address-family and namespace changing in VTI tunnel
      driver(s).  From Steffen Klassert.

  15) Add Altera TSE driver, from Vince Bridgers.

  16) Optimizing csum_replace2() so that it doesn't adjust the checksum
      by checksumming the entire header, from Eric Dumazet.

  17) Expand BPF internal implementation for faster interpreting, more
      direct translations into JIT'd code, and much cleaner uses of BPF
      filtering in non-socket ocntexts.  From Daniel Borkmann and Alexei
      Starovoitov"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1976 commits)
  netpoll: Use skb_irq_freeable to make zap_completion_queue safe.
  net: Add a test to see if a skb is freeable in irq context
  qlcnic: Fix build failure due to undefined reference to `vxlan_get_rx_port'
  net: ptp: move PTP classifier in its own file
  net: sxgbe: make "core_ops" static
  net: sxgbe: fix logical vs bitwise operation
  net: sxgbe: sxgbe_mdio_register() frees the bus
  Call efx_set_channels() before efx->type->dimension_resources()
  xen-netback: disable rogue vif in kthread context
  net/mlx4: Set proper build dependancy with vxlan
  be2net: fix build dependency on VxLAN
  mac802154: make csma/cca parameters per-wpan
  mac802154: allow only one WPAN to be up at any given time
  net: filter: minor: fix kdoc in __sk_run_filter
  netlink: don't compare the nul-termination in nla_strcmp
  can: c_can: Avoid led toggling for every packet.
  can: c_can: Simplify TX interrupt cleanup
  can: c_can: Store dlc private
  can: c_can: Reduce register access
  can: c_can: Make the code readable
  ...

Pull HID updates from Jiri Kosina:
 - substantial cleanup of the generic and transport layers, in the
   direction of an ultimate goal of making struct hid_device completely
   transport independent, by Benjamin Tissoires
 - cp2112 driver from David Barksdale
 - a lot of fixes and new hardware support (Dualshock 4) to hid-sony
   driver, by Frank Praznik
 - support for Win 8.1 multitouch protocol by Andrew Duggan
 - other smaller fixes / device ID additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (75 commits)
  HID: sony: fix force feedback mismerge
  HID: sony: Set the quriks flag for Bluetooth controllers
  HID: sony: Fix Sixaxis cable state detection
  HID: uhid: Add UHID_CREATE2 + UHID_INPUT2
  HID: hyperv: fix _raw_request() prototype
  HID: hyperv: Implement a stub raw_request() entry point
  HID: hid-sensor-hub: fix sleeping function called from invalid context
  HID: multitouch: add support for Win 8.1 multitouch touchpads
  HID: remove hid_output_raw_report transport implementations
  HID: sony: do not rely on hid_output_raw_report
  HID: cp2112: remove the last hid_output_raw_report() call
  HID: cp2112: remove various hid_out_raw_report calls
  HID: multitouch: add support of other generic collections in hid-mt
  HID: multitouch: remove pen special handling
  HID: multitouch: remove registered devices with default behavior
  HID: hidp: Add a comment that some devices depend on the current behavior of uniq
  HID: sony: Prevent duplicate controller connections.
  HID: sony: Perform a boundry check on the sixaxis battery level index.
  HID: sony: Fix work queue issues
  HID: sony: Fix multi-line comment styling
  ...

Pull trivial tree updates from Jiri Kosina:
 "Usual rocket science -- mostly documentation and comment updates"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  sparse: fix comment
  doc: fix double words
  isdn: capi: fix "CAPI_VERSION" comment
  doc: DocBook: Fix typos in xml and template file
  Bluetooth: add module name for btwilink
  driver core: unexport static function create_syslog_header
  mmc: core: typo fix in printk specifier
  ARM: spear: clean up editing mistake
  net-sysfs: fix comment typo 'CONFIG_SYFS'
  doc: Insert MODULE_ in module-signing macros
  Documentation: update URL to hfsplus Technote 1150
  gpio: update path to documentation
  ixgbe: Fix format string in ixgbe_fcoe.
  Kconfig: Remove useless "default N" lines
  user_namespace.c: Remove duplicated word in comment
  CREDITS: fix formatting
  treewide: Fix typo in Documentation/DocBook
  mm: Fix warning on make htmldocs caused by slab.c
  ata: ata-samsung_cf: cleanup in header file
  idr: remove unused prototype of idr_free()

Pull sched/idle changes from Ingo Molnar:
 "More idle code reorganization, to prepare for more integration.

  (Sent separately because it depended on pending timer work, which is
  now upstream)"

* 'sched-idle-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/idle: Add more comments to the code
  sched/idle: Move idle conditions in cpuidle_idle main function
  sched/idle: Reorganize the idle loop
  cpuidle/idle: Move the cpuidle_idle_call function to idle.c
  idle/cpuidle: Split cpuidle_idle_call main function into smaller functions

pidns_get()->get_pid_ns() can hit ns == NULL. This task_struct can't
go away, but task_active_pid_ns(task) is NULL if release_task(task)
was already called. Alternatively we could change get_pid_ns(ns) to
check ns != NULL, but it seems that other callers are fine.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Eric W. Biederman ebiederm@xmission.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull kvm updates from Paolo Bonzini:
 "PPC and ARM do not have much going on this time.  Most of the cool
  stuff, instead, is in s390 and (after a few releases) x86.

  ARM has some caching fixes and PPC has transactional memory support in
  guests.  MIPS has some fixes, with more probably coming in 3.16 as
  QEMU will soon get support for MIPS KVM.

  For x86 there are optimizations for debug registers, which trigger on
  some Windows games, and other important fixes for Windows guests.  We
  now expose to the guest Broadwell instruction set extensions and also
  Intel MPX.  There's also a fix/workaround for OS X guests, nested
  virtualization features (preemption timer), and a couple kvmclock
  refinements.

  For s390, the main news is asynchronous page faults, together with
  improvements to IRQs (floating irqs and adapter irqs) that speed up
  virtio devices"

* tag 'kvm-3.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (96 commits)
  KVM: PPC: Book3S HV: Save/restore host PMU registers that are new in POWER8
  KVM: PPC: Book3S HV: Fix decrementer timeouts with non-zero TB offset
  KVM: PPC: Book3S HV: Don't use kvm_memslots() in real mode
  KVM: PPC: Book3S HV: Return ENODEV error rather than EIO
  KVM: PPC: Book3S: Trim top 4 bits of physical address in RTAS code
  KVM: PPC: Book3S HV: Add get/set_one_reg for new TM state
  KVM: PPC: Book3S HV: Add transactional memory support
  KVM: Specify byte order for KVM_EXIT_MMIO
  KVM: vmx: fix MPX detection
  KVM: PPC: Book3S HV: Fix KVM hang with CONFIG_KVM_XICS=n
  KVM: PPC: Book3S: Introduce hypervisor call H_GET_TCE
  KVM: PPC: Book3S HV: Fix incorrect userspace exit on ioeventfd write
  KVM: s390: clear local interrupts at cpu initial reset
  KVM: s390: Fix possible memory leak in SIGP functions
  KVM: s390: fix calculation of idle_mask array size
  KVM: s390: randomize sca address
  KVM: ioapic: reinject pending interrupts on KVM_SET_IRQCHIP
  KVM: Bump KVM_MAX_IRQ_ROUTES for s390
  KVM: s390: irq routing for adapter interrupts.
  KVM: s390: adapter interrupt sources
  ...

Pull virtio updates from Rusty Russell:
 "Nothing exciting: virtio-blk users might see a bit of a boost from the
  doubling of the default queue length though"

* tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  virtio-blk: base queue-depth on virtqueue ringsize or module param
  Revert a02bbb1c: MAINTAINERS: add virtio-dev ML for virtio
  virtio: fail adding buffer on broken queues.
  virtio-rng: don't crash if virtqueue is broken.
  virtio_balloon: don't crash if virtqueue is broken.
  virtio_blk: don't crash, report error if virtqueue is broken.
  virtio_net: don't crash if virtqueue is broken.
  virtio_balloon: don't softlockup on huge balloon changes.
  virtio: Use pci_enable_msix_exact() instead of pci_enable_msix()
  MAINTAINERS: virtio-dev is subscribers only
  tools/virtio: add a missing )
  tools/virtio: fix missing kmemleak_ignore symbol
  tools/virtio: update internal copies of headers

Pull DMA-mapping updates from Marek Szyprowski:
 "This contains extension for more efficient handling of io address
  space for dma-mapping subsystem for ARM architecture"

* 'for-3.15' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  arm: dma-mapping: remove order parameter from arm_iommu_create_mapping()
  arm: dma-mapping: Add support to extend DMA IOMMU mappings

Pull devicetree changes from Grant Likely:
 "Updates to devicetree core code.  This branch contains the following
  notable changes:

   - add reserved memory binding
   - make struct device_node a kobject and remove legacy
     /proc/device-tree
   - ePAPR conformance fixes
   - update in-kernel DTC copy to version v1.4.0
   - preparatory changes for dynamic device tree overlays
   - minor bug fixes and documentation changes

  The most significant change in this branch is the conversion of struct
  device_node to be a kobject that is exposed via sysfs and removal of
  the old /proc/device-tree code.  This simplifies the device tree
  handling code and tightens up the lifecycle on device tree nodes.

  [updated: added fix for dangling select PROC_DEVICETREE]"

* tag 'dt-for-linus' of git://git.secretlab.ca/git/linux: (29 commits)
  dt: Remove dangling "select PROC_DEVICETREE"
  of: Add support for ePAPR "stdout-path" property
  of: device_node kobject lifecycle fixes
  of: only scan for reserved mem when fdt present
  powerpc: add support for reserved memory defined by device tree
  arm64: add support for reserved memory defined by device tree
  of: add missing major vendors
  of: add vendor prefix for SMSC
  of: remove /proc/device-tree
  of/selftest: Add self tests for manipulation of properties
  of: Make device nodes kobjects so they show up in sysfs
  arm: add support for reserved memory defined by device tree
  drivers: of: add support for custom reserved memory drivers
  drivers: of: add initialization code for dynamic reserved memory
  drivers: of: add initialization code for static reserved memory
  of: document bindings for reserved-memory nodes
  Revert "of: fix of_update_property()"
  kbuild: dtbs_install: new make target
  ARM: mvebu: Allows to get the SoC ID even without PCI enabled
  of: Allows to use the PCI translator without the PCI core
  ...

Pull more ACPI and power management updates from Rafael Wysocki:
 "These are commits that were not quite ready when I sent the original
  pull request for 3.15-rc1 several days ago, but they have spent some
  time in linux-next since then and appear to be good to go.  All of
  them are fixes and cleanups.

  Specifics:

   - Remaining changes from upstream ACPICA release 20140214 that
     introduce code to automatically serialize the execution of methods
     creating any named objects which really cannot be executed in
     parallel with each other anyway (previously ACPICA attempted to
     address that by aborting methods upon conflict detection, but that
     wasn't reliable enough and led to other issues).  From Bob Moore
     and Lv Zheng.

   - intel_pstate fix to use del_timer_sync() instead of del_timer() in
     the exit path before freeing the timer structure from Dirk
     Brandewie (original patch from Thomas Gleixner).

   - cpufreq fix related to system resume from Viresh Kumar.

   - Serialization of frequency transitions in cpufreq that involve
     PRECHANGE and POSTCHANGE notifications to avoid ordering issues
     resulting from race conditions.  From Srivatsa S Bhat and Viresh
     Kumar.

   - Revert of an ACPI processor driver change that was based on a
     specific interpretation of the ACPI spec which may not be correct
     (the relevant part of the spec appears to be incomplete).  From
     Hanjun Guo.

   - Runtime PM core cleanups and documentation updates from Geert
     Uytterhoeven.

   - PNP core cleanup from Michael Opdenacker"

* tag 'pm+acpi-3.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: Make cpufreq_notify_transition & cpufreq_notify_post_transition static
  cpufreq: Convert existing drivers to use cpufreq_freq_transition_{begin|end}
  cpufreq: Make sure frequency transitions are serialized
  intel_pstate: Use del_timer_sync in intel_pstate_cpu_stop
  cpufreq: resume drivers before enabling governors
  PM / Runtime: Spelling s/competing/completing/
  PM / Runtime: s/foo_process_requests/foo_process_next_request/
  PM / Runtime: GENERIC_SUBSYS_PM_OPS is gone
  PM / Runtime: Correct documented return values for generic PM callbacks
  PM / Runtime: Split line longer than 80 characters
  PM / Runtime: dev_pm_info.runtime_error is signed
  Revert "ACPI / processor: Make it possible to get APIC ID via GIC"
  ACPICA: Enable auto-serialization as a default kernel behavior.
  ACPICA: Ignore sync_level for methods that have been auto-serialized.
  ACPICA: Add additional named objects for the auto-serialize method scan.
  ACPICA: Add auto-serialization support for ill-behaved control methods.
  ACPICA: Remove global option to serialize all control methods.
  PNP: remove deprecated IRQF_DISABLED

Pull powerpc non-virtualized cpuidle from Ben Herrenschmidt:
 "This is the branch I mentioned in my other pull request which contains
  our improved cpuidle support for the "powernv" platform
  (non-virtualized).

  It adds support for the "fast sleep" feature of the processor which
  provides higher power savings than our usual "nap" mode but at the
  cost of losing the timers while asleep, and thus exploits the new
  timer broadcast framework to work around that limitation.

  It's based on a tip timer tree that you seem to have already merged"

* 'powernv-cpuidle' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  cpuidle/powernv: Parse device tree to setup idle states
  cpuidle/powernv: Add "Fast-Sleep" CPU idle state
  powerpc/powernv: Add OPAL call to resync timebase on wakeup
  powerpc/powernv: Add context management for Fast Sleep
  powerpc: Split timer_interrupt() into timer handling and interrupt handling routines
  powerpc: Implement tick broadcast IPI as a fixed IPI message
  powerpc: Free up the slot of PPC_MSG_CALL_FUNC_SINGLE IPI message

Pull main powerpc updates from Ben Herrenschmidt:
 "This time around, the powerpc merges are going to be a little bit more
  complicated than usual.

  This is the main pull request with most of the work for this merge
  window.  I will describe it a bit more further down.

  There is some additional cpuidle driver work, however I haven't
  included it in this tree as it depends on some work in tip/timer-core
  which Thomas accidentally forgot to put in a topic branch.  Since I
  didn't want to carry all of that tip timer stuff in powerpc -next, I
  setup a separate branch on top of Thomas tree with just that cpuidle
  driver in it, and Stephen has been carrying that in next separately
  for a while now.  I'll send a separate pull request for it.

  Additionally, two new pieces in this tree add users for a sysfs API
  that Tejun and Greg have been deprecating in drivers-core-next.
  Thankfully Greg reverted the patch that removes the old API so this
  merge can happen cleanly, but once merged, I will send a patch
  adjusting our new code to the new API so that Greg can send you the
  removal patch.

  Now as for the content of this branch, we have a lot of perf work for
  power8 new counters including support for our new "nest" counters
  (also called 24x7) under pHyp (not natively yet).

  We have new functionality when running under the OPAL firmware
  (non-virtualized or KVM host), such as access to the firmware error
  logs and service processor dumps, system parameters and sensors, along
  with a hwmon driver for the latter.

  There's also a bunch of bug fixes accross the board, some LE fixes,
  and a nice set of selftests for validating our various types of copy
  loops.

  On the Freescale side, we see mostly new chip/board revisions, some
  clock updates, better support for machine checks and debug exceptions,
  etc..."

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (70 commits)
  powerpc/book3s: Fix CFAR clobbering issue in machine check handler.
  powerpc/compat: 32-bit little endian machine name is ppcle, not ppc
  powerpc/le: Big endian arguments for ppc_rtas()
  powerpc: Use default set of netfilter modules (CONFIG_NETFILTER_ADVANCED=n)
  powerpc/defconfigs: Enable THP in pseries defconfig
  powerpc/mm: Make sure a local_irq_disable prevent a parallel THP split
  powerpc: Rate-limit users spamming kernel log buffer
  powerpc/perf: Fix handling of L3 events with bank == 1
  powerpc/perf/hv_{gpci, 24x7}: Add documentation of device attributes
  powerpc/perf: Add kconfig option for hypervisor provided counters
  powerpc/perf: Add support for the hv 24x7 interface
  powerpc/perf: Add support for the hv gpci (get performance counter info) interface
  powerpc/perf: Add macros for defining event fields & formats
  powerpc/perf: Add a shared interface to get gpci version and capabilities
  powerpc/perf: Add 24x7 interface headers
  powerpc/perf: Add hv_gpci interface header
  powerpc: Add hvcalls for 24x7 and gpci (Get Performance Counter Info)
  sysfs: create bin_attributes under the requested group
  powerpc/perf: Enable BHRB access for EBB events
  powerpc/perf: Add BHRB constraint and IFM MMCRA handling for EBB
  ...

Pull MIPS updates from Ralf Baechle:
 - Support for Imgtec's Aptiv family of MIPS cores.
 - Improved detection of BCM47xx configurations.
 - Fix hiberation for certain configurations.
 - Add support for the Chinese Loongson 3 CPU, a MIPS64 R2 core and
   systems.
 - Detection and support for the MIPS P5600 core.
 - A few more random fixes that didn't make 3.14.
 - Support for the EVA Extended Virtual Addressing
 - Switch Alchemy to the platform PATA driver
 - Complete unification of Alchemy support
 - Allow availability of I/O cache coherency to be runtime detected
 - Improvments to multiprocessing support for Imgtec platforms
 - A few microoptimizations
 - Cleanups of FPU support
 - Paul Gortmaker's fixes for the init stuff
 - Support for seccomp

* 'mips-for-linux-next' of git://git.linux-mips.org/pub/scm/ralf/upstream-sfr: (165 commits)
  MIPS: CPC: Use __raw_ memory access functions
  MIPS: CM: use __raw_ memory access functions
  MIPS: Fix warning when including smp-ops.h with CONFIG_SMP=n
  MIPS: Malta: GIC IPIs may be used without MT
  MIPS: smp-mt: Use common GIC IPI implementation
  MIPS: smp-cmp: Remove incorrect core number probe
  MIPS: Fix gigaton of warning building with microMIPS.
  MIPS: Fix core number detection for MT cores
  MIPS: MT: core_nvpes function to retrieve VPE count
  MIPS: Provide empty mips_mt_set_cpuoptions when CONFIG_MIPS_MT=n
  MIPS: Lasat: Replace del_timer by del_timer_sync
  MIPS: Malta: Setup PM I/O region on boot
  MIPS: Loongson: Add a Loongson-3 default config file
  MIPS: Loongson 3: Add CPU hotplug support
  MIPS: Loongson 3: Add Loongson-3 SMP support
  MIPS: Loongson: Add Loongson-3 Kconfig options
  MIPS: Loongson: Add swiotlb to support All-Memory DMA
  MIPS: Loongson 3: Add serial port support
  MIPS: Loongson 3: Add IRQ init and dispatch support
  MIPS: Loongson 3: Add HT-linked PCI support
  ...

Commit 74397174 attempted to clean up the power management options
for arm64, but when things were merged it didn't fully take effect.  Fix
it again.
Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'x86-nuke-platforms-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 old platform removal from Peter Anvin:
 "This patchset removes support for several completely obsolete
  platforms, where the maintainers either have completely vanished or
  acked the removal.  For some of them it is questionable if there even
  exists functional specimens of the hardware"

Geert Uytterhoeven apparently thought this was a April Fool's pull request ;)

* 'x86-nuke-platforms-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, platforms: Remove NUMAQ
  x86, platforms: Remove SGI Visual Workstation
  x86, apic: Remove support for IBM Summit/EXA chipset
  x86, apic: Remove support for ia32-based Unisys ES7000

Pull compat time conversion changes from Peter Anvin:
 "Despite the branch name this is really neither an x86 nor an
  x32-specific patchset, although it the implementation of the
  discussions that followed the x32 security hole a few months ago.

  This removes get/put_compat_timespec/val() and replaces them with
  compat_get/put_timespec/val() which are savvy as to the current status
  of COMPAT_USE_64BIT_TIME.

  It removes several unused and/or incorrect/misleading functions (like
  compat_put_timeval_convert which doesn't in fact do any conversion)
  and also replaces several open-coded implementations what is now
  called compat_convert_timespec() with that function"

* 'x86-x32-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  compat: Fix sparse address space warnings
  compat: Get rid of (get|put)_compat_time(val|spec)

Pull x86 vdso changes from Peter Anvin:
 "This is the revamp of the 32-bit vdso and the associated cleanups.

  This adds timekeeping support to the 32-bit vdso that we already have
  in the 64-bit vdso.  Although 32-bit x86 is legacy, it is likely to
  remain in the embedded space for a very long time to come.

  This removes the traditional COMPAT_VDSO support; the configuration
  variable is reused for simply removing the 32-bit vdso, which will
  produce correct results but obviously suffer a performance penalty.
  Only one beta version of glibc was affected, but that version was
  unfortunately included in one OpenSUSE release.

  This is not the end of the vdso cleanups.  Stefani and Andy have
  agreed to continue work for the next kernel cycle; in fact Andy has
  already produced another set of cleanups that came too late for this
  cycle.

  An incidental, but arguably important, change is that this ensures
  that unused space in the VVAR page is properly zeroed.  It wasn't
  before, and would contain whatever garbage was left in memory by BIOS
  or the bootloader.  Since the VVAR page is accessible to user space
  this had the potential of information leaks"

* 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  x86, vdso: Fix the symbol versions on the 32-bit vDSO
  x86, vdso, build: Don't rebuild 32-bit vdsos on every make
  x86, vdso: Actually discard the .discard sections
  x86, vdso: Fix size of get_unmapped_area()
  x86, vdso: Finish removing VDSO32_PRELINK
  x86, vdso: Move more vdso definitions into vdso.h
  x86: Load the 32-bit vdso in place, just like the 64-bit vdsos
  x86, vdso32: handle 32 bit vDSO larger one page
  x86, vdso32: Disable stack protector, adjust optimizations
  x86, vdso: Zero-pad the VVAR page
  x86, vdso: Add 32 bit VDSO time support for 64 bit kernel
  x86, vdso: Add 32 bit VDSO time support for 32 bit kernel
  x86, vdso: Patch alternatives in the 32-bit VDSO
  x86, vdso: Introduce VVAR marco for vdso32
  x86, vdso: Cleanup __vdso_gettimeofday()
  x86, vdso: Replace VVAR(vsyscall_gtod_data) by gtod macro
  x86, vdso: __vdso_clock_gettime() cleanup
  x86, vdso: Revamp vclock_gettime.c
  mm: Add new func _install_special_mapping() to mmap.c
  x86, vdso: Make vsyscall_gtod_data handling x86 generic
  ...

Pull x86 boot changes from Peter Anvin:
 "This patchset is a set of cleanups aiming at librarize some of the
  common code from the boot environments.  We currently have three
  different "little environments" (boot, boot/compressed, and
  realmode/rm) in x86, and we are likely to soon get a fourth one
  (kexec/purgatory, which will have to be integrated in the kernel to
  support secure kexec).  This is primarily a cleanup in the
  anticipation of the latter.

  While Vivek implemented this, he ran into some bugs, in particular the
  memcmp implementation for when gcc punts from using the builtin would
  have a misnamed symbol, causing compilation errors if we were ever
  unlucky enough that gcc didn't want to inline the test"

* 'x86/boot' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, boot: Move memset() definition in compressed/string.c
  x86, boot: Move memcmp() into string.h and string.c
  x86, boot: Move optimized memcpy() 32/64 bit versions to compressed/string.c
  x86, boot: Create a separate string.h file to provide standard string functions
  x86, boot: Undef memcmp before providing a new definition

Pull Metag architecture changes from James Hogan:
 - Remove unused NUMA definition (SD_NODE_INIT)
 - Refactor signal code to use struct ksignal
 - IRQ migration cleanup to use irq_set_affinity
 - Clean up main Kconfig file a little

* tag 'metag-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
  sched: remove unused SCHED_INIT_NODE
  metag: Use get_signal() signal_setup_done()
  metag: Fix METAG Kconfig symbol select ordering
  metag: Use irq_set_affinity instead of homebrewn code

Commit 2223f6f6 "x86: Clean up dumpstack_64.c code" changed
the irq_stack processing a little from what it was before.
The irq_stack_end variable needed to be cleared after its first
use. By setting irq_stack to the per cpu irq_stack and passing
that to analyze_stack(), and then clearing it after it is processed,
we can get back the original behavior.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 2223f6f6 "x86: Clean up dumpstack_64.c code" moved the used
variable to a local within the loop, but the in_exception_stack()
depended on being non-volatile with the ability to change it.

By always re-initializing the "used" variable to zero, it would cause
the in_exception_stack() to return the same thing each time, and
cause the dump_stack loop to go into an infinite loop.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>