* pci/host-mediatek:
  PCI: mediatek: Use PCI_NUM_INTX
  PCI: mediatek: Add MSI support for MT2712 and MT7622
  PCI: mediatek: Use bus->sysdata to get host private data
  dt-bindings: PCI: Add support for MT2712 and MT7622
  PCI: mediatek: Add controller support for MT2712 and MT7622
  dt-bindings: PCI: Cleanup MediaTek binding text
  dt-bindings: PCI: Rename MediaTek binding
  PCI: mediatek: Switch to use platform_get_resource_byname()
  PCI: mediatek: Add a structure to abstract the controller generations
  PCI: mediatek: Rename port->index and mtk_pcie_parse_ports()
  PCI: mediatek: Use readl_poll_timeout() to wait for Gen2 training
  PCI: mediatek: Explicitly request exclusive reset control

* pci/host-layerscape:
  PCI: layerscape: Add support for ls1088a
  PCI: layerscape: Add support for ls2088a
  PCI: artpec6: Stop enabling writes to DBI read-only registers
  PCI: layerscape: Remove unnecessary class code fixup
  PCI: dwc: Enable write permission for Class Code, Interrupt Pin updates
  PCI: dwc: Add accessors for write permission of DBI read-only registers
  PCI: layerscape: Disable outbound windows configured by bootloader
  PCI: layerscape: Refactor ls1021_pcie_host_init()
  PCI: layerscape: Move generic init functions earlier in file
  PCI: layerscape: Add class code and multifunction fixups for ls1021a
  PCI: layerscape: Move STRFMR1 access out from the DBI write-enable bracket
  PCI: layerscape: Call dw_pcie_setup_rc() from ls_pcie_host_init()

* pci/host-kirin:
  PCI: kirin: Constify dw_pcie_host_ops structure

* pci/host-keystone:
  PCI: keystone: Use PCI_NUM_INTX
  PCI: keystone: Remove duplicate MAX_*_IRQS defs
  PCI: keystone-dw: Remove unused ks_pcie, pci variables

* pci/host-iproc:
  PCI: iproc: Clean up whitespace
  PCI: iproc: Rename PCI_EXP_CAP to IPROC_PCI_EXP_CAP
  PCI: iproc: Add 500ms delay during device shutdown
  PCI: iproc: Work around Stingray CRS defects
  PCI: iproc: Factor out memory-mapped config access address calculation
  PCI: iproc: Remove unused struct iproc_pcie *pcie

* pci/host-imx6:
  PCI: imx6: Explicitly request exclusive reset control

* pci/host-hv:
  PCI: hv: Do not sleep in compose_msi_msg()

* pci/host-hisi:
  PCI: hisi: Constify dw_pcie_host_ops structure
  PCI: hisi: Remove unused variable driver

* pci/host-faraday:
  PCI: faraday: Use PCI_NUM_INTX
  PCI: faraday: Fix of_irq_get() error check

* pci/host-exynos:
  PCI: exynos: Fix platform_get_irq() error handling

* pci/host-dra7xx:
  PCI: dra7xx: Fix platform_get_irq() error handling
  PCI: dra7xx: Propagate platform_get_irq() errors in dra7xx_pcie_probe()
  PCI: dra7xx: Use PCI_NUM_INTX

* pci/host-designware:
  PCI: dwc: Clear MSI interrupt status after it is handled, not before
  PCI: qcom: Allow ->post_init() to fail
  PCI: qcom: Don't unroll init if ->init() fails
  PCI: dwc: designware: Handle ->host_init() failures
  PCI: dwc: designware: Test PCIE_ATU_ENABLE bit specifically
  PCI: dwc: designware: Make dw_pcie_prog_*_atu_unroll() static

* pci/host-artpec6:
  PCI: artpec6: Fix platform_get_irq() error handling

* pci/host-armada:
  PCI: armada8k: Fix platform_get_irq() error handling
  PCI: armada8k: Check the return value from clk_prepare_enable()

* pci/host-altera:
  PCI: altera: Fix platform_get_irq() error handling
  PCI: altera: Use size=4 IRQ domain for legacy INTx
  PCI: altera: Remove unused num_of_vectors variable

* pci/host-aardvark:
  PCI: aardvark: Use PCI_NUM_INTX

* pci/irq-intx:
  PCI: Add pci_irqd_intx_xlate()
  PCI: Move enum pci_interrupt_pin to linux/pci.h

platform_get_irq() returns a negative number on failure, so adjust the
logic to detect such condition and propagate the real error value on
failure.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ley Foon Tan <lftan@altera.com>

platform_get_irq() returns a negative number on failure, so adjust the
logic to detect such condition and propagate the real error value on
failure.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Niklas Cassel <niklas.cassel@axis.com>

platform_get_irq() returns a negative number on failure, so adjust the
logic to detect such condition and propagate the real error value on
failure.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

When platform_get_irq() fails we should propagate the real error value
instead of always returning -EINVAL.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>

platform_get_irq() returns a negative number on failure, so adjust the
logic to detect such condition and propagate the real error value on
failure.
Reported-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jingoo Han <jingoohan1@gmail.com>

Use tabs (not spaces) for indentation.  No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

PCI_EXP_CAP is an iProc-specific value, so rename it to IPROC_PCI_EXP_CAP
to make it obvious that it's not related to the generic values like
PCI_EXP_RTCTL, etc.  No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

During soft reset (e.g., "reboot" from Linux) on some iProc-based SOCs, the
LCPLL clock and PERST both go off simultaneously.  This seems in accordance
with the PCIe Card Electromechanical spec, r2.0, sec 2.2.3, which says the
clock goes inactive after PERST# goes active, but doesn't specify how long
the clock should be valid after PERST#.

However, we have observed that with the iProc Stingray, some Intel NVMe
endpoints, e.g., the P3700 400GB series, are not detected correctly upon
the next boot sequence unless the clock remains valid for some time after
PERST# is asserted.

Delay 500ms after asserting PERST# before performing a reboot.  The 500ms
is experimentally determined.
Signed-off-by: Oza Pawandeep <oza.oza@broadcom.com>
[bhelgaas: changelog, add spec reference, fold in iproc_pcie_shutdown()
export from Arnd Bergmann <arnd@arndb.de>]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>

Switch from using custom INTX_NUM macro to the generic PCI_NUM_INTX definition
for the number of INTx interrupts.
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
[bhelgaas: use subject/changelog from similar patches]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

MT2712 and MT7622's PCIe host controller support MSI, but only 32-bit MSI
addresses are supported. It connects to GIC with the same IRQ number as the
INTx IRQ, so it shares the same IRQ with INTx IRQ.

Add MSI support for MT2712 and MT7622.
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
[bhelgaas: changes to follow rcar & tegra: rename to mtk_pcie_msi_alloc(),
add mtk_pcie_msi_free(), free hwirq if irq_create_mapping() fails, call
irq_dispose_mapping() from mtk_msi_teardown_irq()]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>

75983c6d1f38 ("PCI: mediatek: Add controller support for MT2712 and
MT7622") has put the mtk_pcie * into bus->sysdata.  Take advantage of that
to get the private data and simplify the code.
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>

Add controller support for MT2712/MT7622 and update related properties.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>

MT2712 and MT7622 using a new IP block of Gen2 controller which has two
root ports and shares the same probing flow with MT2701/MT7623.

Both MT2712 and MT7622 have the same per-port control registers, but
there are slight differences between them:

  - MT7622 has more clocks than MT2712.

  - MT7622 has shared control registers which are used to enable LTSSM and
    ASPM while MT2712 does not.

Add host controller support for MT2712/MT7622.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
[bhelgaas: folded in fix from http://lkml.kernel.org/r/1502715868-17651-2-git-send-email-honghui.zhang@mediatek.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

To accommodate other SoC generations, regroup specific properties by SoC,
and remove redundant descriptions.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
[bhelgaas: split into a rename patch and a cleanup patch]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>

To accommodate other SoC generations, rename mediatek,mt7623-pcie.txt to
mediatek-pcie.txt.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
[bhelgaas: split rename to separate patch so updates are obvious]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>

This is a transitional patch.  We currently use platfarm_get_resource() for
retrieving the IOMEM resources, but there might be some chips don't have
subsys/shared registers part, which depends on platform design, and these
will be introduced in further patches.

Switch this function to use the platform_get_resource_byname() so that the
binding can be agnostic of the resource order.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Introduce a structure "mtk_pcie_soc" to abstract the differences between
controller generations, and the .startup() hook is used to encapsulate some
SoC-dependent related setting.  In doing so, the common code which will be
reused by future chips.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Rename "port->index" to "port->slot" since the ports are hardwired at
PCI_SLOT.  Also rename "mtk_pcie_parse_ports()" to "mtk_pcie_parse_port()"
since it parses one port each time.

No functional change in this patch.
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Wait for Gen2 training with readl_poll_timeout(), and simplify the hardware
assert logical by merging it into a new mtk_pcie_startup_port() interface.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Commit a53e35db ("reset: Ensure drivers are explicit when requesting
reset lines") started to transition the reset control request API calls to
explicitly state whether the driver needs exclusive or shared reset control
behavior. Convert all drivers requesting exclusive resets to the explicit
API call so the temporary transition helpers can be removed.

No functional changes.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ryder Lee <ryder.lee@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>

Add support for ls1088a.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Minghuan Lian <minghuan.Lian@nxp.com>

The ls2088a PCIe controller's register addresses are different from
ls2080a, so add a match entry to identify ls2088a PCIe.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Minghuan Lian <minghuan.Lian@nxp.com>

Previously we enabled writes to the DBI read-only registers so the Class
Code fix in dw_pcie_setup_rc() would work.  But now dw_pcie_setup_rc()
enables write permission itself, so we don't need to do it here.

Stop enabling writes to the DBI read-only registers.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Roy Zang <tie-fei.zang@freescale.com>