Program USB2 pad PD controls during port connect/disconnect, port
suspend/resume, and test mode, to reduce power consumption on
disconnect or suspend.
Signed-off-by: Petlozu Pravareshwar <petlozup@nvidia.com>
Co-developed-by: Jim Lin <jilin@nvidia.com>
Signed-off-by: Jim Lin <jilin@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20221111101813.32482-4-jilin@nvidia.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

XHCI host drivers may override the default xhci_hub_control() with
their own device specific function. To allow these host drivers to
call the xhci_hub_control() function from within their own
hub_control() callback and be built as a module, export the symbol
for xhci_hub_control.
Signed-off-by: Jim Lin <jilin@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20221111101813.32482-3-jilin@nvidia.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a hub_control() callback to the xhci_driver_overrides structure to
allow host drivers to override the default hub_control function. This
is required for Tegra which requires device specific actions for power
management to be executed during USB state transitions.
Signed-off-by: Jim Lin <jilin@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20221111101813.32482-2-jilin@nvidia.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This change adds Tegra234 XUSB host mode controller support.

In Tegra234, some of the registers have moved to bar2 space.
The new soc variable has_bar2 indicates the chip with bar2
area. This patch adds new reg helper to let the driver reuse
the same code for those chips with bar2 support.
Signed-off-by: Sing-Han Chen <singhanc@nvidia.com>
Co-developed-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20230111110450.24617-7-jonathanh@nvidia.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add support for the XUSB pad controller found on Tegra234 SoCs. It is
mostly similar to the same IP found on Tegra194, because most of
the Tegra234 XUSB PADCTL registers definition and programming sequence
are the same as Tegra194, Tegra234 XUSB PADCTL can share the same
driver with Tegra186 and Tegra194 XUSB PADCTL.

Introduce a new feature, USB2 HW tracking, for Tegra234.
The feature is to enable HW periodical PAD tracking which measure
and capture the electric parameters of USB2.0 PAD.
Signed-off-by: Sing-Han Chen <singhanc@nvidia.com>
Co-developed-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20230111110450.24617-6-jonathanh@nvidia.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pad tracking is a one-time calibration for Tegra186 and Tegra194.
Clk should be disabled after calibration.

Disable clk after calibration.
While at it add 100us delay for HW recording the calibration value.
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20230111110450.24617-5-jonathanh@nvidia.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit enables XUSB host and pad controller on Jetson AGX Orin.
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20230111110450.24617-4-jonathanh@nvidia.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add device-tree binding documentation for the XUSB host controller present
on Tegra234 SoC. This controller supports the USB 3.1 specification.
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230111110450.24617-2-jonathanh@nvidia.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Color matching attributes in the configfs for UVC are named with the
phrase "default". The implication of that is that they will only be
used _with_ the default color matching descriptor, and that will
shortly no longer be the case.

Remove the "default" from the color matching descriptor attribute
variables.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Link: https://lore.kernel.org/r/20221213083736.2284536-2-dan.scally@ideasonboard.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The USB controllers in the i.MX8MP are located inside the HSIO
power domain. Add the power-domains property to the DT binding
to be able to describe the hardware properly.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230110180804.594462-1-l.stach@pengutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Enable wakeup when pluging or unpluging USB cable. It is up to other
components to hold system in active mode, such as display, so that
user can receive the notification.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20230105075058.924680-2-jun.nie@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add wakeup property description. People can enable it with adding
the property.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230105075058.924680-1-jun.nie@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time.  To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic at
once.

Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Jilin Yuan <yuanjilin@cdjrlc.com>
Link: https://lore.kernel.org/r/20230106152828.3790902-1-gregkh@linuxfoundation.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

After contributing the driver, add myself as the maintainer
for Renesas RZ/N1 USBF controller.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230105152257.310642-6-herve.codina@bootlin.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add the USBF controller available in the r9a06g032 SoC.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230105152257.310642-5-herve.codina@bootlin.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add support for the Renesas USBF controller.
This controller is an USB2.0 UDC controller available in the
Renesas r9a06g032 SoC (RZ/N1 family).
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20230105152257.310642-4-herve.codina@bootlin.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The CFG_USB[H2MODE] allows to switch the USB configuration. The
configuration supported are:
  - One host and one device
or
  - Two hosts

Set CFG_USB[H2MODE] based on the USBF controller (USB device)
availability.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230105152257.310642-3-herve.codina@bootlin.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Renesas RZ/N1 USBF controller is an USB2.0 device controller
(UDC) available in the Renesas r9a06g032 SoC (RZ/N1 family).
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230105152257.310642-2-herve.codina@bootlin.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is no need to call acpi_dev_present() followed by
acpi_dev_get_first_match_dev() as they both do the same
with only difference in the returning value. Instead,
call the latter and check its result.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230102202933.15968-2-andriy.shevchenko@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When acpi_dev_get_memory_resources() fails, the reference count is
left bumped. Drop it as it's done in the other error paths.

Fixes: 43d596e3 ("usb: typec: intel_pmc_mux: Check the port status before connect")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230102202933.15968-1-andriy.shevchenko@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Under resource constraints, this interrupt may use other interrupt line
or this interrupt line may be shared with other devices as long as they
meet the sharing requirements. Besides, This irq flag will not cause other
side effect if tcpci driver is the only user.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20221214022334.2520677-1-xu.yang_2@nxp.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add fsl,imx8mm-usbmisc compatible for i.MX8MM
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221223031012.92932-2-peng.fan@oss.nxp.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add fsl,imx8mm-usb compatible for i.MX8MM
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221223031012.92932-1-peng.fan@oss.nxp.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Document the transfer buffer requirement. That is, the buffer must be
DMAble - otherwise data corruption might occur.
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20221220-usb-dmadoc-v4-0-74a045bf14f4@chromium.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The notification call chain should be registered after the device gets
ready. Otherwise, we  might get errors when setting data roles in an
incomplete system.

This patch refactors update data role work and register the notifier
call chain after the system gets ready.
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Haotien Hsu <haotienh@nvidia.com>
Link: https://lore.kernel.org/r/20221216042026.98517-1-haotienh@nvidia.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Some platforms(for eg: RZ/V2M EVK) does not have interrupt pin
connected to HD3SS3220. Add polling support for role detection.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20221209171836.71610-3-biju.das.jz@bp.renesas.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

On some platforms(for eg: RZ/V2M EVK), interrupt is not populated. Update
the binding to make interrupt property as optional.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20221209171836.71610-2-biju.das.jz@bp.renesas.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull powerpc fixes from Michael Ellerman:

 - Three fixes for various bogosity in our linker script, revealed
   by the recent commit which changed discard behaviour with some
   toolchains.

* tag 'powerpc-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/vmlinux.lds: Don't discard .comment
  powerpc/vmlinux.lds: Don't discard .rela* for relocatable builds
  powerpc/vmlinux.lds: Define RUNTIME_DISCARD_EXIT

Pull memblock fixes from Mike Rapoport:
 "Small fixes in kernel-doc and tests:

   - Fix kernel-doc for memblock_phys_free() to use correct names for
     the counterpart allocation methods

   - Fix compilation error in memblock tests"

* tag 'fixes-2023-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  memblock: Fix doc for memblock_phys_free
  memblock tests: Fix compilation error.

Pull NFS client fixes from Trond Myklebust:

 - Fix a race in the RPCSEC_GSS upcall code that causes hung RPC calls

 - Fix a broken coalescing test in the pNFS file layout driver

 - Ensure that the access cache rcu path also applies the login test

 - Fix up for a sparse warning

* tag 'nfs-for-6.2-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFS: Fix up a sparse warning
  NFS: Judge the file access cache's timestamp in rcu path
  pNFS/filelayout: Fix coalescing test for single DS
  SUNRPC: ensure the matching upcall is in-flight upon downcall

Pull cifs fixes from Steve French:
 "cifs/smb3 client fixes:

   - two multichannel fixes

   - three reconnect fixes

   - unmap fix"

* tag '6.2-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix interface count calculation during refresh
  cifs: refcount only the selected iface during interface update
  cifs: protect access of TCP_Server_Info::{dstaddr,hostname}
  cifs: fix race in assemble_neg_contexts()
  cifs: ignore ipc reconnect failures during dfs failover
  cifs: Fix kmap_local_page() unmapping

Pull devicetree fixes from Rob Herring:

 - Fix DT memory scanning for some MIPS boards when memory is not
   specified in DT

 - Redo CONFIG_CMDLINE* handling for missing /chosen node. The first
   attempt broke PS3 (and possibly other PPC platforms).

 - Fix constraints in QCom Soundwire schema

* tag 'devicetree-fixes-for-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of: fdt: Honor CONFIG_CMDLINE* even without /chosen node, take 2
  Revert "of: fdt: Honor CONFIG_CMDLINE* even without /chosen node"
  dt-bindings: soundwire: qcom,soundwire: correct sizes related to number of ports
  of/fdt: run soc memory setup when early_init_dt_scan_memory fails

Pull USB fixes from Greg KH:
 "Here are some small USB driver fixes for 6.2-rc3 that resolve some
  reported issues. They include:

   - of-reported ulpi problem, so the offending commit is reverted

   - dwc3 driver bugfixes for recent changes

   - fotg210 fixes

  Most of these have been in linux-next for a while, the last few were
  on the mailing list for a long time and passed all the 0-day bot
  testing so all should be fine with them as well"

* tag 'usb-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: dwc3: gadget: Ignore End Transfer delay on teardown
  usb: dwc3: xilinx: include linux/gpio/consumer.h
  usb: fotg210-udc: fix error return code in fotg210_udc_probe()
  usb: fotg210: fix OTG-only build
  Revert "usb: ulpi: defer ulpi_register on ulpi_read_id timeout"

Pull rdma fixes from Jason Gunthorpe:
 "Most noticeable is that Yishai found a big data corruption regression
  due to a change in the scatterlist:

   - Do not wrongly combine non-contiguous pages in scatterlist

   - Fix compilation warnings on gcc 13

   - Oops when using some mlx5 stats

   - Bad enforcement of atomic responder resources in mlx5"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  lib/scatterlist: Fix to merge contiguous pages into the last SG properly
  RDMA/mlx5: Fix validation of max_rd_atomic caps for DC
  RDMA/mlx5: Fix mlx5_ib_get_hw_stats when used for device
  RDMA/srp: Move large values to a new enum for gcc13

Merge tag 'kbuild-fixes-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix single *.ko build

 - Fix module builds when vmlinux.o or Module.symver is missing

* tag 'kbuild-fixes-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: readd -w option when vmlinux.o or Module.symver is missing
  kbuild: fix single *.ko build

Pull drm fixes from Daniel Vetter:
 "Still not much, but more than last week. Dave should be back next week
  from the beaching.

  drivers:
   - i915-gvt fixes
   - amdgpu/kfd fixes
   - panfrost bo refcounting fix
   - meson afbc corruption fix
   - imx plane width fix

  core:
   - drm/sched fixes
   - drm/mm kunit test fix
   - dma-buf export error handling fixes"

* tag 'drm-fixes-2023-01-06' of git://anongit.freedesktop.org/drm/drm:
  Revert "drm/amd/display: Enable Freesync Video Mode by default"
  drm/i915/gvt: fix double free bug in split_2MB_gtt_entry
  drm/i915/gvt: use atomic operations to change the vGPU status
  drm/i915/gvt: fix vgpu debugfs clean in remove
  drm/i915/gvt: fix gvt debugfs destroy
  drm/i915: unpin on error in intel_vgpu_shadow_mm_pin()
  drm/amd/display: Uninitialized variables causing 4k60 UCLK to stay at DPM1 and not DPM0
  drm/amdkfd: Fix kernel warning during topology setup
  drm/scheduler: Fix lockup in drm_sched_entity_kill()
  drm/imx: ipuv3-plane: Fix overlay plane width
  drm/scheduler: Fix lockup in drm_sched_entity_kill()
  drm/virtio: Fix memory leak in virtio_gpu_object_create()
  drm/meson: Reduce the FIFO lines held when AFBC is not used
  drm/tests: reduce drm_mm_test stack usage
  drm/panfrost: Fix GEM handle creation ref-counting
  drm/plane-helper: Add the missing declaration of drm_atomic_state
  dma-buf: fix dma_buf_export init order v2

TPM 1 is sometimes broken across system suspends, due to races or
locking issues or something else that haven't been diagnosed or fixed
yet, most likely having to do with concurrent reads from the TPM's
hardware random number generator driver. These issues prevent the system
from actually suspending, with errors like:

  tpm tpm0: A TPM error (28) occurred continue selftest
  ...
  tpm tpm0: A TPM error (28) occurred attempting get random
  ...
  tpm tpm0: Error (28) sending savestate before suspend
  tpm_tis 00:08: PM: __pnp_bus_suspend(): tpm_pm_suspend+0x0/0x80 returns 28
  tpm_tis 00:08: PM: dpm_run_callback(): pnp_bus_suspend+0x0/0x10 returns 28
  tpm_tis 00:08: PM: failed to suspend: error 28
  PM: Some devices failed to suspend, or early wake event detected

This issue was partially fixed by 23393c64 ("char: tpm: Protect
tpm_pm_suspend with locks"), in a last minute 6.1 commit that Linus took
directly because the TPM maintainers weren't available. However, it
seems like this just addresses the most common cases of the bug, rather
than addressing it entirely. So there are more things to fix still,
apparently.

In lieu of actually fixing the underlying bug, just allow system suspend
to continue, so that laptops still go to sleep fine. Later, this can be
reverted when the real bug is fixed.

Link: https://lore.kernel.org/lkml/7cbe96cf-e0b5-ba63-d1b4-f63d2e826efa@suse.cz/
Cc: stable@vger.kernel.org # 6.1+
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Luigi Semenzato <semenzato@chromium.org>
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Johannes Altmanninger <aclopte@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 55d1cbbb ("hfs/hfsplus: use WARN_ON for sanity check") fixed
a build warning by turning a comment into a WARN_ON(), but it turns out
that syzbot then complains because it can trigger said warning with a
corrupted hfs image.

The warning actually does warn about a bad situation, but we are much
better off just handling it as the error it is.  So rather than warn
about us doing bad things, stop doing the bad things and return -EIO.

While at it, also fix a memory leak that was introduced by an earlier
fix for a similar syzbot warning situation, and add a check for one case
that historically wasn't handled at all (ie neither comment nor
subsequent WARN_ON).

Reported-by: syzbot+7bb7cd3595533513a9e7@syzkaller.appspotmail.com
Fixes: 55d1cbbb ("hfs/hfsplus: use WARN_ON for sanity check")
Fixes: 8d824e69 ("hfs: fix OOB Read in __hfs_brec_find")
Link: https://lore.kernel.org/lkml/000000000000dbce4e05f170f289@google.com/Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>