LTC2952 is an external power control chip, which signals
the OS to shut down. This patch documents the DT binding
for the chip.
Signed-off-by: René Moll <rene.moll@xsens.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

This adds a driver for the LTC2952, an external power control chip,
which signals the OS to shut down. Additionally this driver lets the
kernel power down the board.
Signed-off-by: René Moll <rene.moll@xsens.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

This piece of code was added so that we return -EPROBE_DEFER when no devices are
registered. But even if class_for_each_device() returns 0, we are going to
return -EPROBE_DEFER only.

And so this code isn't required at all. Remove it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

Using 'goto' statements for freeing resources on failures is a good choice as it
makes code very clean, and reduces the chances of human errors.

Though in most cases compiler may take care of this. But adding unnecessary
'goto' statements wouldn't make anything better. Code becomes less readable
actually.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

In power_supply_show_property() routine, we call ->get_property() conditionally
and should check for failure in that case only. There is no point comparing
'ret' for errors when 'ret' is surely zero.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

At multiple places we are doing exactly what PTR_ERR_OR_ZERO() does. And so that
routine can be reused instead of increasing lines of code here.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

The 'if' statements in power_supply_changed_work() are mostly there for taking
care of races and normally they will always evaluate to true. Optimize them for
fast execution with 'likely' statements.

Also there is need to have better comments in code to mention about the races
clearly. Get them in place.

Cc: Zoran Markovic <zrn.markovic@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

There is no need to check the value of ret.intval before returning it, as we
will be returning zero explicitly when ret.intval is zero.

So essentially we will end up returning value of ret.intval as it is. Drop the
unnecessary 'if' statements.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

We need to stop 'class_for_each_device' loop when a supply matches with the
of-node. In order to achieve this we currently return -EINVAL from
__power_supply_populate_supplied_from() on successful match.

class_for_each_device() is free to return similar errors in other cases as well
and so the choice of return value here isn't particularly great.

This commit isn't removing the Hack but making it more elegant by returning '1'
instead.

Also power_supply_find_supply_from_node() can return errors other than
-EPROBE_DEFER now if class_for_each_device() fails.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

Callers of power_supply_find_supply_from_node(), i.e.
power_supply_check_supplies(), must propagate the errors returned by it instead
of returning their own.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

of_node_put() was called twice in power_supply_check_supplies() whereas a single
call will also work. Rearrange code a bit to make that feasible.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

In few routines, we need to end the do-while loop when no more "power-supplies"
are available. Currently we are doing 'continue' which will make the
'while(np)' conditional statement run again.

Skip this by doing a 'break' instead.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

Typecast from 'void *' to any other pointer type falls under implicit typecasts
category and so doesn't require explicit typecasts. Drop them.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

power_supply.h requires to forward declare few structures. One of them is done
at the top of the file and other one just before it is used. Declare them
together for better readability.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

'unnecessary' was wrongly spelled as 'unncessary', also it should have been
'unnecessarily'.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

If power-supply's DT node doesn't have a valid "power-supplies" entry, then
power_supply_check_supplies() should return early instead of trying to allocate
memory for "supplied_from" array.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

In routine power_supply_check_supplies(), 'cnt' is counting the number of
supplies passed in "power-supplies" field of a node. The value of 'cnt' will
always be one more than the number of supplies after the do-while loop ends. And
so we need to allocate memory for 'cnt - 1' char pointers. But we are allocating
memory for 'cnt' instead.

Fix this by not over-allocating memory.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

Casting the return value which is a void pointer is redundant.
The conversion from void pointer to any other pointer type is
guaranteed by the C programming language.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

Usually PMIC's come with coulomb counting mechanism which can be
used to implement a Fuel Gauginig solution in Software itself.
One of key input to these SW Fuel Gauge solutioons is the boot up
parameters like boot voltage and boot current.

This patch adds the VOLTAGE_BOOT and CURRENT_BOOT power supply attributes
to report bootup voltage and current.

This patch also adds CALIBRATE power supply attribute which useful is
for calibrating the battery/coulomb counter.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

This patch check the charging state after completed initialization of charger-
manager and update current charging state. If charger-manager never check and
update current charging state, charger-manager would have the mismatch issue
between real state of cable connection and the charging state of charger-manager
until first polling time of charger-manager.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

This patch fix minor issue about checking wrong return type.

The of_cm_parse_desc() return ERR_PTR(errnor number) when some error happen
in this function. But, charger_manager_probe() has only checked whether
desc is NULL or not. If of_cm_parse_desc() returns ERR_PTR(-ENOMEM), desc
isn't NULL but desc is (void *)(-ENOMEM). Althouhg some error happen for parsing
DT, charger_manager_probe() can't detect error of desc instance.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

The xgene-reset driver uses xgene_restart() as arm_pm_restart() but that
function should take an enum reset_type as the first argument rather than
a char. Fix this; the paramter is not referenced in the implementation.
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

sbs-battery has a max design voltage but not a min design voltage field.
The SBS spec only has one design voltage:
http://www.sbs-forum.org/specs/sbdat110.pdf

Currently this is being used for max design voltage.  This patch uses it
for min design voltage as well.
Signed-off-by: Simon Que <sque@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Todd Broch <tbroch@chromium.org>
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

This CL supports two power_supply_property items for smart battery:
POWER_SUPPLY_PROP_MANUFACTURER and POWER_SUPPLY_PROP_MODEL_NAME such
that battery information 'manufacturer' and 'model_name' can be exported
to sysfs.
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Reviewed-by: Olof Johansson <olofj@chromium.org>
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

Pull i2c bugfixes from Wolfram Sang:
 "I2C driver bugfixes for the 3.17 release.  Details can be found in the
  commit messages, yet I think this is typical driver stuff"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  Revert "i2c: rcar: remove spinlock"
  i2c: at91: add bound checking on SMBus block length bytes
  i2c: rk3x: fix bug that cause transfer fails in master receive mode
  i2c: at91: Fix a race condition during signal handling in at91_do_twi_xfer.
  i2c: mv64xxx: continue probe when clock-frequency is missing
  i2c: rcar: fix MNR interrupt handling

Pull m68k updates from Geert Uytterhoeven:
 "Wire up new syscalls getrandom and memfd_create"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Wire up memfd_create
  m68k: Wire up getrandom

Dave Hansen reports a massive scalability regression in an uncontained
page fault benchmark with more than 30 concurrent threads, which he
bisected down to 05b84301 ("mm: memcontrol: use root_mem_cgroup
res_counter") and pin-pointed on res_counter spinlock contention.

That change relied on the per-cpu charge caches to mostly swallow the
res_counter costs, but it's apparent that the caches don't scale yet.

Revert memcg back to bypassing res_counters on the root level in order
to restore performance for uncontained workloads.
Reported-by: Dave Hansen <dave@sr71.net>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Dave Hansen <dave.hansen@intel.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch changes sync_filesystem() to be EXPORT_SYMBOL().

The reason this is needed is that starting with 3.15 kernel, due to
Theodore Ts'o's commit 02b9984d ("fs: push sync_filesystem() down to
the file system's remount_fs()"), all file systems that have dirty data
to be written out need to call sync_filesystem() from their
->remount_fs() method when remounting read-only.

As this is now a generically required function rather than an internal
only function it should be EXPORT_SYMBOL() so that all file systems can
call it.
Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull regulator documentation fixes from Mark Brown:
 "All the fixes people have found for the regulator API have been
  documentation fixes, avoiding warnings while building the kerneldoc,
  fixing some errors in one of the DT bindings documents and fixing some
  typos in the header"

* tag 'regulator-v3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: fix kernel-doc warnings in header files
  regulator: Proofread documentation
  regulator: tps65090: Fix tps65090 typos in example

Pull GPIO fixes from Linus Walleij:
 - some documentation sync
 - resource leak in the bt8xx driver
 - again fix the way varargs are used to handle the optional flags on
   the gpiod_* accessors.  Now hopefully nailed the entire problem.

* tag 'gpio-v3.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: move varargs hack outside #ifdef GPIOLIB
  gpio: bt8xx: fix release of managed resources
  Documentation: gpio: documentation for optional getters functions

Pull drm fixes from Dave Airlie:
 - i915 fixes: a few display regressions
 - vmwgfx: possible loop forever fix
 - nouveau: one userspace interface fix

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/nouveau/core: don't leak oclass type bits to user
  drm/i915: Fix lock dropping in intel_tv_detect()
  drm/i915: handle G45/GM45 pulse detection connected state.
  drm/vmwgfx: Fix a potential infinite spin waiting for fifo idle
  drm/vmwgfx: Fix an incorrect OOM return value
  drm/i915: Remove bogus __init annotation from DMI callbacks
  drm/i915: don't warn if backlight unexpectedly enabled
  drm/i915: Move intel_ddi_set_vc_payload_alloc(false) to haswell_crtc_disable()
  drm/i915: fix plane/cursor handling when runtime suspended
  drm/i915: Ignore VBT backlight presence check on Acer C720 (4005U)

Merge remote-tracking branches 'regulator/fix/doc' and 'regulator/fix/tps65090' into regulator-linus

single fix for nouveau.

* 'linux-3.17' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
  drm/nouveau/core: don't leak oclass type bits to user

Fixes not being able to init fence subsystem when multiple boards are
present.
Reported-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Pull aio bugfixes from Ben LaHaise:
 "Two small fixes"

* git://git.kvack.org/~bcrl/aio-fixes:
  aio: block exit_aio() until all context requests are completed
  aio: add missing smp_rmb() in read_events_ring

It seems that exit_aio() also needs to wait for all iocbs to complete (like
io_destroy), but we missed the wait step in current implemention, so fix
it in the same way as we did in io_destroy.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
Cc: stable@vger.kernel.org

This reverts commit 150b8be3.

The I2C core's per-adapter locks can't protect from IRQs, so the driver still
needs a spinlock to protect the register accesses.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: stable@vger.kernel.org # 3.16+
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Pull hwmon bugfix from Guenter Roeck:
 "Fix a bug in the ds1621 driver"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (ds1621) Update zbits after conversion rate change

Merge tag 'platform-drivers-x86-v3.17-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull x86 platform drivers fixes from Darren Hart:
 "This is my first pull request since taking on maintenance for the
  platform-drivers-x86 tree from Matthew Garrett.  These have passed my
  build testing and been run through Fengguang's LKP tests.  Due to
  timing this round, these have not spent any time in linux-next.  I
  have asked Stephen to include my for-next branch in linux-next going
  forward, once he's back from vacation.

  Details from tag:

   - toshiba_acpi: re-enable hotkeys and cleanups
   - ideapad-laptop: revert touchpad disable, and cleanup static/const
     usage
   - MAINTAINERS: update platform-drivers-x86 maintainer and tree"

* tag 'platform-drivers-x86-v3.17-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
  toshiba_acpi: fix and cleanup toshiba_kbd_bl_mode_store()
  platform/x86: toshiba: re-enable acpi hotkeys after suspend to disk
  ideapad-laptop: Constify DMI table for real!
  Revert "ideapad-laptop: Disable touchpad interface on Yoga models"
  MAINTAINERS: Update platform-drivers-x86 maintainer and tree

Pull sound fixes from Takashi Iwai:
 "This time it contains a bunch of small ASoC fixes that slipped from in
  previous updates, in addition to the usual HD-audio fixes and the
  regression fixes for FireWire updates in 3.17.

  All commits are reasonably small fixes"

* tag 'sound-3.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Fix COEF setups for ALC1150 codec
  ASoC: simple-card: Fix bug of wrong decrement DT node's refcount
  ALSA: hda - Fix digital mic on Acer Aspire 3830TG
  ASoC: omap-twl4030: Fix typo in 2nd dai link's platform_name
  ALSA: firewire-lib/dice: add arrangements of PCM pointer and interrupts for Dice quirk
  ALSA: dice: fix wrong channel mappping at higher sampling rate
  ASoC: cs4265: Fix setting of functional mode and clock divider
  ASoC: cs4265: Fix clock rates in clock map table
  ASoC: rt5677: correct mismatch widget name
  ASoC: rt5640: Do not allow regmap to use bulk read-write operations
  ASoC: tegra: Fix typo in include guard
  ASoC: da732x: Fix typo in include guard
  ASoC: core: fix .info for SND_SOC_BYTES_TLV
  ASoC: rcar: Use && instead of & for boolean expressions
  ASoC: Use dev_set_name() instead of init_name
  ASoC: axi: Fix ADI AXI SPDIF specification