Change return values of function r8712_setrfreg_cmd from _SUCCESS/_FAIL
to 0/-ENOMEM respectively. Modify call site accordingly.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove function r8712_setassocsta_cmd as it is only called by
mp_start_joinbss, which was removed in the previous patch.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unused function mp_start_joinbss.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove function r8712_find_network as all it does is call
_r8712_find_network.
Rename _r8712_find_network to r8712_find_network for compatibility with
call sites.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unused function r8712_setrttbl_cmd.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove function r8712_free_evt_priv as all it does is call
_free_evt_priv.
Rename _free_evt_priv to r8712_free_evt_priv to maintain compatibility
with call sites.
Change type of new r8712_free_evt_priv from static to non-static to
match old definition.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove function r8712_free_cmd_priv as all it does is call
_free_cmd_priv.
Change type of new r8712_free_cmd_priv from static to non-static to
match definition of original r8712_free_cmd_priv.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change return values of the function r8712_init_evt_priv from
_SUCCESS/_FAIL to 0/-ENOMEM. Modify call site accordingly.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove function r8712_init_evt_priv as all it does is call
_init_evt_priv.
Rename _init_evt_priv to r8712_init_evt_priv to maintain compatibility
with call sites.
Change type of new r8712_init_evt_priv from static to non-static as
original r8712_init_evt_priv was non-static.
Change return type of new r8712_init_evt_priv to int as original had
return type u32 but new (formerly _init_evt_priv) had return type sint.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change return values in r8712_init_cmd_priv from _SUCCESS/_FAIL to
0/-ENOMEM. Modify call site accordingly.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove function block_resume as it was only called by
vchiq_arm_force_suspend, which was removed in a previous patch.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove function output_timeout_error as it was only called by
vchiq_arm_force_suspend, which was deleted in a previous patch.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unused function vchiq_send_remote_release.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unused function vchiq_use_service_no_resume.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unused function vchiq_resume_internal.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unused function vchiq_pause_internal.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unused function vchiq_arm_force_suspend.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unused function vchiq_arm_allow_resume.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unused function vchiu_queue_is_full.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes checkpatch errors:
- spaces required around that '=' (ctx:VxV)
- space required before the open parenthesis '('
- spaces preferred around that '-' (ctx:VxV)
- space required before the open brace '{'
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes checkpatch "CHECK: spaces preferred around that '+' (ctx:VxV)".
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Function is_ap_in_wep() is not used in the driver code, so remove it.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Function get_bsstype() is not used in the driver code, so remove it.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtw_init_default_value() func always returns a value (u8)_SUCCESS.
Modified return type to void to resolve coccicheck warnings
of unneeded variable.
Signed-off-by: Shobhit Kukreti <shobhitkukreti@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Changed return type of function rtw_suspend_wow() to void.
The function always return _SUCCESS and the value is never
checked in the calling function.

Resolves coccicheck Unneeded variable "ret" warning.
Signed-off-by: Shobhit Kukreti <shobhitkukreti@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Coccicheck issues Unneeded variable "ret" warning.
The return value of function rtw_suspend_normal() is set to _SUCCESS.
The return value is never never checked by the calling function.
Modified return type to void to remove the coccicheck warning..
Signed-off-by: Shobhit Kukreti <shobhitkukreti@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function rtw_reset_drv_sw() return value is set to _SUCCESS.
The return value is never checked when the function is called.
Modified the return value to void to remove "Unneeded Variable warning
of coccicheck.
Signed-off-by: Shobhit Kukreti <shobhitkukreti@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function static uint loadparam(struct adapter *padapter, _nic_hdl
pnetdev) return type is modified to void.
The initial return value was always returning _SUCCESS and the return value
is never checked when the function is called.
This resolves coccicheck warnings of unneeded variables.
Signed-off-by: Shobhit Kukreti <shobhitkukreti@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Function hal_init_macaddr() just calls rtw_hal_set_hwreg().
Use rtw_hal_set_hwreg() directly and remove hal_init_macaddr().
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup checkpatch issues in usb_halinit.c.
CHECK: Lines should not end with a '('
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Decompressor needs to know whether it's a partial
or full decompression since only full decompression
can be decompressed in-place.

On kirin980 platform, sequential read is finally
increased to 812MiB/s after decompression inplace
is enabled.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch integrates new decompression framework to
erofs decompression path, and remove the old
decompression implementation as well.

On kirin980 platform, sequential read is slightly
improved to 778MiB/s after the new decompression
backend is used.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

compressed data will be usually loaded into last pages of
the extent (the last page for 4k) for in-place decompression
(more specifically, in-place IO), as ilustration below,

         start of compressed logical extent
           |                          end of this logical extent
           |                           |
     ______v___________________________v________
... |  page 6  |  page 7  |  page 8  |  page 9  | ...
    |__________|__________|__________|__________|
           .                         ^ .        ^
           .                         |compressed|
           .                         |   data   |
           .                           .        .
           |<          dstsize        >|<margin>|
                                       oend     iend
           op                        ip

Therefore, it's possible to do decompression inplace (thus no
memcpy at all) if the margin is sufficient and safe enough [1],
and it can be implemented only for fixed-size output compression
compared with fixed-size input compression.

No memcpy for most of in-place IO (about 99% of enwik9) after
decompression inplace is implemented and sequential read will
be improved of course (see the following patches for test results).

[1] https://github.com/lz4/lz4/commit/b17f578a919b7e6b078cede2d52be29dd48c8e8c
    https://github.com/lz4/lz4/commit/5997e139f53169fa3a1c1b4418d2452a90b01602Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds a new generic decompression framework
in order to replace the old LZ4-specific decompression code.

Even though LZ4 is still the only supported algorithm, yet
it is more cleaner and easy to integrate new algorithm than
the old almost hard-coded decompression backend.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stagingpages are behaved as bounce pages for temporary use.
Move to compress.h since the upcoming decompressor will
allocate stagingpages as well.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch moves per-CPU buffers to utils.c in order for
the upcoming generic decompression framework to use it.

Note that I tried to use generic per-CPU buffer or
per-CPU page approaches to clean up further, but obvious
performanace regression (about 2% for sequential read) was
observed.

Therefore let's leave it as it is instead, just move
to utils.c and I'll try to dig into the root cause later.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch aims at compacted compression indexes:
 1) cleanup z_erofs_map_blocks_iter and move into zmap.c;
 2) add compacted 4/2B decoding support.

On kirin980 platform, sequential read is increased about
6% (725MiB/s -> 770MiB/s) on enwik9 dataset if compacted 2B
feature is enabled.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch introduces new compacted compression indexes.

In contract to legacy compression indexes that
   each 4k logical cluster has an 8-byte index,
compacted ondisk compression indexes will have
   amortized 2 bytes for each 4k logical cluster (compacted 2B)
   amortized 4 bytes for each 4k logical cluster (compacted 4B)

In detail, several continuous clusters will be encoded in
a compacted pack with cluster types, offsets, and one blkaddr
at the end of the pack to leave 4-byte margin for better
decoding performance, as illustrated below:
   _____________________________________________
  |___@_____ encoded bits __________|_ blkaddr _|
  0       .                                     amortized * vcnt
  .          .
  .             .                   amortized * vcnt - 4
  .                .
  .___________________.
  |_type_|_clusterofs_|

Note that compacted 2 / 4B should be aligned with 32 / 8 bytes
in order to avoid each pack crossing page boundary.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Comedi's acquisition buffer allocation code can allocate the buffer from
normal kernel memory or from DMA coherent memory depending on the
`dma_async_dir` value in the comedi subdevice.  (A value of `DMA_NONE`
causes the buffer to be allocated from normal kernel memory.  Other
values cause the buffer to be allocated from DMA coherent memory.)   The
buffer currently consists of a bunch of page-sized blocks that are
vmap'ed into a contiguous range of virtual addresses. The pages are also
mmap'able into user address space.  For DMA'able buffers, these
page-sized blocks are allocated by `dma_alloc_coherent()`.

For DMA-able buffers, the DMA API is currently abused in various ways,
the most serious abuse being the calling of `virt_to_page()` on the
blocks allocated by `dma_alloc_coherent()` and passing those pages to
`vmap()` (for mapping to the kernels vmalloc address space) and via
`page_to_pfn()` to `remap_pfn_range()` (for mmap'ing to user space).  it
also uses the `__GFP_COMP` flag when allocating the blocks, and marks
the allocated pages as reserved (which is unnecessary for DMA coherent
allocations).

The code can be changed to get rid of the vmap'ed address altogether if
necessary, since there are only a few places in the comedi code that use
the vmap'ed address directly and we also keep a list of the kernel
addresses for the individual pages prior to the vmap operation. This
would add some run-time overhead to buffer accesses.  The real killer is
the mmap operation.

For mmap, the address range specified in the VMA needs to be mmap'ed to
the individually allocated page-sized blocks.  That is not a problem
when the pages are allocated from normal kernel memory as the individual
pages can be remapped by `remap_pfn_range()`, but it is a problem when
the page-sized blocks are allocated by `dma_alloc_coherent()` because
the DMA API currently has no support for splitting a VMA across multiple
blocks of DMA coherent memory (or rather, no support for mapping part of
a VMA range to a single block of DMA coherent memory).

In order to comply with the DMA API and allow the buffer to be mmap'ed,
the buffer needs to be allocated as a single block by a single call to
`dma_alloc_coherent()`, freed by a single call to `dma_free_coherent()`,
and mmap'ed to user space by a single call to `dma_mmap_coherent()`.
This patch changes the buffer allocation, freeing, and mmap'ing code to
do that, with the unfortunate consequence that buffer allocation is more
likely to fail.  It also no longer uses the `__GFP_COMP` flag when
allocating DMA coherent memory, no longer marks the
allocated pages of DMA coherent memory as reserved, and no longer vmap's
the DMA coherent memory pages (since they are contiguous anyway).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 3e5bc68f as it
causes build errors in linux-next.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>