Skip to content

L
linux
Switch branch/tag
  1. 22 Dec, 2016 1 commit
    • Luis de Bethencourt's avatar
      befs: fix style issues in debug.c · a83179a8
      Luis de Bethencourt authored 
      Fix all checkpatch.pl errors and warnings in debug.c:
ERROR: trailing whitespace
+ * $

WARNING: Missing a blank line after declarations
+       va_list args;
+       va_start(args, fmt);

ERROR: "foo * bar" should be "foo *bar"
+befs_dump_inode(const struct super_block *sb, befs_inode * inode)

ERROR: "foo * bar" should be "foo *bar"
+befs_dump_super_block(const struct super_block *sb, befs_super_block * sup)

ERROR: "foo * bar" should be "foo *bar"
+befs_dump_small_data(const struct super_block *sb, befs_small_data * sd)

WARNING: line over 80 characters
+befs_dump_index_entry(const struct super_block *sb, befs_disk_btree_super * super)

ERROR: "foo * bar" should be "foo *bar"
+befs_dump_index_entry(const struct super_block *sb, befs_disk_btree_super * super)

ERROR: "foo * bar" should be "foo *bar"
+befs_dump_index_node(const struct super_block *sb, befs_btree_nodehead * node)
Signed-off-by: default avatarLuis de Bethencourt <luisbg@osg.samsung.com>
      a83179a8
  3. 11 Dec, 2016 4 commits
  5. 10 Dec, 2016 5 commits
    • Linus Torvalds's avatar
      Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 · 04516981
      Linus Torvalds authored 
      Pull crypto fixes from Herbert Xu:
 "This fixes the following issues:

   - Fix pointer size when caam is used with AArch64 boot loader on
     AArch32 kernel.

   - Fix ahash state corruption in marvell driver.

   - Fix buggy algif_aed tag handling.

   - Prevent mcryptd from being used with incompatible algorithms which
     can cause crashes"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: algif_aead - fix uninitialized variable warning
  crypto: mcryptd - Check mcryptd algorithm compatibility
  crypto: algif_aead - fix AEAD tag memory handling
  crypto: caam - fix pointer size for AArch64 boot loader, AArch32 kernel
  crypto: marvell - Don't corrupt state of an STD req for re-stepped ahash
  crypto: marvell - Don't copy hash operation twice into the SRAM
      04516981
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · cd662895
      Linus Torvalds authored 
      Pull networking fixes from David Miller:

 1) Limit the number of can filters to avoid > MAX_ORDER allocations.
    Fix from Marc Kleine-Budde.

 2) Limit GSO max size in netvsc driver to avoid problems with NVGRE
    configurations. From Stephen Hemminger.

 3) Return proper error when memory allocation fails in
    ser_gigaset_init(), from Dan Carpenter.

 4) Missing linkage undo in error paths of ipvlan_link_new(), from Gao
    Feng.

 5) Missing necessayr SET_NETDEV_DEV in lantiq and cpmac drivers, from
    Florian Fainelli.

 6) Handle probe deferral properly in smsc911x driver.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  net: mlx5: Fix Kconfig help text
  net: smsc911x: back out silently on probe deferrals
  ibmveth: set correct gso_size and gso_type
  net: ethernet: cpmac: Call SET_NETDEV_DEV()
  net: ethernet: lantiq_etop: Call SET_NETDEV_DEV()
  vhost-vsock: fix orphan connection reset
  cxgb4/cxgb4vf: Assign netdev->dev_port with port ID
  driver: ipvlan: Unlink the upper dev when ipvlan_link_new failed
  ser_gigaset: return -ENOMEM on error instead of success
  NET: usb: cdc_mbim: add quirk for supporting Telit LE922A
  can: peak: fix bad memory access and free sequence
  phy: Don't increment MDIO bus refcount unless it's a different owner
  netvsc: reduce maximum GSO size
  drivers: net: cpsw-phy-sel: Clear RGMII_IDMODE on "rgmii" links
  can: raw: raw_setsockopt: limit number of can_filter that can be set
      cd662895
    • Christopher Covington's avatar
      net: mlx5: Fix Kconfig help text · d33695fb
      Christopher Covington authored 
      Since the following commit, Infiniband and Ethernet have not been
mutually exclusive.

Fixes: 4aa17b28 mlx5: Enable mutual support for IB and Ethernet
Signed-off-by: default avatarChristopher Covington <cov@codeaurora.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d33695fb
    • Linus Walleij's avatar
      net: smsc911x: back out silently on probe deferrals · ab4e4c07
      Linus Walleij authored 
      When trying to get a regulator we may get deferred and we see
this noise:

smsc911x 1b800000.ethernet-ebi2 (unnamed net_device) (uninitialized):
   couldn't get regulators -517

Then the driver continues anyway. Which means that the regulator
may not be properly retrieved and reference counted, and may be
switched off in case noone else is using it.

Fix this by returning silently on deferred probe and let the
system work it out.

Cc: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ab4e4c07
    • Thomas Falcon's avatar
      ibmveth: set correct gso_size and gso_type · 7b596738
      Thomas Falcon authored 
      This patch is based on an earlier one submitted
by Jon Maxwell with the following commit message:

"We recently encountered a bug where a few customers using ibmveth on the
same LPAR hit an issue where a TCP session hung when large receive was
enabled. Closer analysis revealed that the session was stuck because the
one side was advertising a zero window repeatedly.

We narrowed this down to the fact the ibmveth driver did not set gso_size
which is translated by TCP into the MSS later up the stack. The MSS is
used to calculate the TCP window size and as that was abnormally large,
it was calculating a zero window, even although the sockets receive buffer
was completely empty."

We rely on the Virtual I/O Server partition in a pseries
environment to provide the MSS through the TCP header checksum
field. The stipulation is that users should not disable checksum
offloading if rx packet aggregation is enabled through VIOS.

Some firmware offerings provide the MSS in the RX buffer.
This is signalled by a bit in the RX queue descriptor.
Reviewed-by: default avatarBrian King <brking@linux.vnet.ibm.com>
Reviewed-by: default avatarPradeep Satyanarayana <pradeeps@linux.vnet.ibm.com>
Reviewed-by: default avatarMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: default avatarJonathan Maxwell <jmaxwell37@gmail.com>
Reviewed-by: default avatarDavid Dai <zdai@us.ibm.com>
Signed-off-by: default avatarThomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7b596738
  7. 09 Dec, 2016 11 commits
  9. 08 Dec, 2016 17 commits
  11. 07 Dec, 2016 2 commits
    • Nicolai Stange's avatar
      libata-scsi: disable SCT Write Same for the moment · e185934f
      Nicolai Stange authored 
      SCT Write Same support had been introduced with
commit 7b203094 ("libata: Add support for SCT Write Same")

Some problems, namely excessive userspace segfaults, had been reported at

  http://lkml.kernel.org/r/20160908192736.GA4356@gmail.com

This lead to commit 0ce1b18c ("libata: Some drives failing on
SCT Write Same") which strived to disable SCT Write Same on !ZAC devices.
Due to the way this was done and to the logic in sd_config_write_same(),
this didn't work for those devices that have
->max_ws_blocks > SD_MAX_WS10_BLOCKS: for these, ->no_write_same and
->max_write_same_sectors would still be non-zero,
but ->ws10 == ->ws16 == 0. This would cause sd_setup_write_same_cmnd() to
demultiplex REQ_OP_WRITE_SAME requests to WRITE_SAME, and these in turn
aren't supported by libata-scsi:

  EXT4-fs (dm-1): Delayed block allocation failed for inode 2625094 at
                  logical offset 2032 with max blocks 2 with error 121
  EXT4-fs (dm-1): This should not happen!! Data will be lost

121 == EREMOTEIO is what scsi_io_completion() asserts in case of
invalid opcodes.

Back to the original problem of userspace segfaults: this can be tracked
down to ata_format_sct_write_same() overwriting the input page. Sometimes,
this page is ZERO_PAGE(0) which ceases to be filled with zeros from that
point on. Since ZERO_PAGE(0) is used for userspace .bss mappings, code of
the following is doomed:

  static char *a = NULL; /* .bss */
  ...
  if (a)
    *a = 'a';

This problem is not solved by disabling SCT Write Same for !ZAC devices
only.

It can certainly be fixed, but the final release is quite close -- so
disable SCT Write Same for all ATA devices rather than introducing some
SCT key buffer allocation schemes at this point.

Fixes: 7b203094 ("libata: Add support for SCT Write Same")
Signed-off-by: default avatarNicolai Stange <nicstange@gmail.com>
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      e185934f
    • Stefan Agner's avatar
      ARM: dts: imx7d: fix LCDIF clock assignment · 4b707fa0
      Stefan Agner authored 
      The eLCDIF IP of the i.MX 7 SoC knows multiple clocks and lists them
separately:

Clock      Clock Root              Description
apb_clk    MAIN_AXI_CLK_ROOT       AXI clock
pix_clk    LCDIF_PIXEL_CLK_ROOT    Pixel clock
ipg_clk_s  MAIN_AXI_CLK_ROOT       Peripheral access clock

All of them are switched by a single gate, which is part of the
IMX7D_LCDIF_PIXEL_ROOT_CLK clock. Hence using that clock also for
the AXI bus clock (clock-name "axi") makes sure the gate gets
enabled when accessing registers.

There seem to be no separate AXI display clock, and the clock is
optional. Hence remove the dummy clock.

This fixes kernel freezes when starting the X-Server (which
disables/re-enables the display controller).

Fixes: e8ed73f6 ("ARM: dts: imx7d: add lcdif support")
Signed-off-by: default avatarStefan Agner <stefan@agner.ch>
Reviewed-by: default avatarFabio Estevam <fabio.estevam@nxp.com>
Acked-by: default avatarShawn Guo <shawnguo@kernel.org>
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      4b707fa0
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7