Merge tag 'qcom-arm64-for-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

More Qualcomm ARM64 DT updates for 5.13

This adds RPMh regulators, coresight, AOSS qmp, ipcc, llcc for the
SC7280. It adds interconnect, PRNG and thermal pieces to SM8350. It
specifies the now required clocks for the SDM845 gcc, corrects the
firmware-name for adsp and cdsp on the db845c and defines DSI and panel
bits for Xiaomi Pocophone F1.

SM8150 gains iommu settings and the remaining I2C controllers and SM8250
gains Venus and the QMP PHY is updated to include the DP portion.

It adds the MSM8998 based OnePlus 5/5T device and enables sound support
on the Trogdor device family.

Lastly it adds the GIC hypervisor registers & interrupt for when Linux
is booted in EL2 on MSM8916.

* tag 'qcom-arm64-for-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (25 commits)
  arm64: dts: qcom: update usb qmp phy clock-cells property
  arm64: dts: qcom: msm8916: Add GICv2 hypervisor registers/interrupt
  arm64: dts: sdm845-db845c: make firmware filenames follow linux-firmware
  arm64: dts: qcom: sdm845-xiaomi-beryllium: Add DSI and panel bits
  arm64: dts: qcom: sc7280: Add Coresight support
  arm64: dts: qcom: sc7280: Add AOSS QMP node
  arm64: dts: qcom: sc7280: Add IPCC for SC7280 SoC
  arm64: dts: qcom: sc7280: Add device tree node for LLCC
  arm64: dts: qcom: Add support for OnePlus 5/5T
  arm64: dts: qcom: msm8998: Disable MSS remoteproc by default
  arm64: dts: qcom: Move rmtfs memory region
  arm64: dts: qcom: Add sound node for sc7180-trogdor-coachz
  arm64: dts: qcom: sc7180-trogdor: Add lpass dai link for I2S driver
  arm64: dts: qcom: use dp_phy to provide clocks to dispcc
  arm64: dts: qcom: sm8250: switch usb1 qmp phy to USB3+DP mode
  arm64: dts: qcom: sm8250: Add venus DT node
  arm64: dts: qcom: sm8250: Add videocc DT node
  arm64: dts: qcom: sm8350: Add interconnects
  arm64: dts: qcom: sm8350: Add support for PRNG EE
  arm64: dts: qcom: sc7280: Add RPMh regulators for sc7280-idp
  ...

Link: https://lore.kernel.org/r/20210409163949.776530-1-bjorn.andersson@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-dts-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm dts updates for v5.13

This adds Bluetooth support on the Samsung Galaxy S5, corrects the mount
matrix for the IMU on Nexus 5 and corrects the fuel gauge irq trigger
for the two devices.

* tag 'qcom-dts-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  ARM: dts: qcom: msm8974-klte: Add bluetooth support
  ARM: dts: qcom: msm8974: add blsp2_uart8
  ARM: dts: qcom: msm8974-samsung-klte: correct fuel gauge interrupt trigger level
  ARM: dts: qcom: msm8974-lge-nexus5: correct fuel gauge interrupt trigger level
  ARM: dts: qcom: msm8974-hammerhead: add mount matrix for IMU

Link: https://lore.kernel.org/r/20210409162359.776076-1-bjorn.andersson@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

The kernelci.org bot reports a build time regression:

arch/arm/boot/dts/ep7209.dtsi:187.17-192.4: Warning (interrupts_property): /keypad: Missing interrupt-parent

There is only one interrupt controller in this SoC, so I assume this
is the parent.

Fixes: 2bd86203 ("ARM: dts: clps711x: Add keypad node")
Reported-by: kernelci.org bot <bot@kernelci.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

dtc warns about a mismatched address:

arch/arm/boot/dts/armada-385-atl-x530.dts:171.14-199.4: Warning (spi_bus_reg): /soc/spi@10680/spi-flash@0: SPI bus unit address format error, expected "1"

I assume the "reg" property is correct here, so adjust the unit address
accordingly.

Fixes: c6dfc019 ("ARM: dts: mvebu: Add device tree for ATL-x530 Board")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kernelci.org bot <bot@kernelci.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'bmc-5.13-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt

BMC device tree updates for 5.13

The ASPEED and Nuvoton pull request now comes as a combined BMC pull
request.

 - New machines

  * ASRock E3C246D4I, an AST2500 BMC for an Xeon E-2100/E-2200 mini-ITX
    system
  * Quanta GBS, an NPCM730 BMC for an x86 server

 - Power10 BMC updates for Everest and Rainier

 - GPIO line names for Mihawk

* tag 'bmc-5.13-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: (21 commits)
  ARM: dts: nuvoton: Add Quanta GBS BMC Device Tree
  ARM: dts: aspeed: mihawk: Add GPIO line names
  ARM: dts: aspeed: Add Rainier 1S4U machine
  ARM: dts: aspeed: everest: Add size/address cells
  ARM: dts: aspeed: everest: Enable fan watchdog
  ARM: dts: aspeed: everest: Add RTC
  ARM: dts: aspeed: everest: GPIOs support
  ARM: dts: aspeed: everest: Add UCD90320 power sequencer
  ARM: dts: aspeed: everest: Add power supply i2c devices
  ARM: dts: aspeed: everest: Add pca9552 fan presence
  ARM: dts: aspeed: everest: Add FSI CFAMs and re-number engines
  ARM: dts: aspeed: everest: Add max31785 fan controller device
  ARM: dts: aspeed: everest: Add I2C components
  ARM: dts: aspeed: rainier 4U: Fix fan configuration
  ARM: dts: aspeed: rainier: Add missing fan nodes
  ARM: dts: aspeed: rainier: Enable fan watchdog
  ARM: dts: aspeed: rainier: Add presence GPIOs
  ARM: dts: aspeed: rainier: Add additional processor CFAMs
  ARM: dts: aspeed: rainier: Add gpio-keys-polled for fans
  ARM: dts: aspeed: rainier: Add directly controlled LEDs
  ...

Link: https://lore.kernel.org/r/CACPK8Xe-KV5BeQwOH6NKC1++FCVqwwNCGBh7hEbBORfrmxfTtQ@mail.gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Add device tree node for ATC2603C PMIC and remove the 'fixed-3.1V'
dummy regulator used for the uSD supply.

Additionally, add 'SYSPWR' fixed regulator and provide cpu0 supply.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/2e0a2931ae3757f016948e7c78e8e54afa325ae0.1615538629.git.cristian.ciocaltea@gmail.com
Link: https://lore.kernel.org/r/20210408062232.3575-1-mani@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'mvebu-dt-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt

mvebu dt for 5.13 (part 1)

Add support for ATL-x530 Board (Armada 38x based)

* tag 'mvebu-dt-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
  ARM: dts: mvebu: Add device tree for ATL-x530 Board

Link: https://lore.kernel.org/r/87v98xbzir.fsf@BL-laptopSigned-off-by: Arnd Bergmann <arnd@arndb.de>

The top-level node doesn't provide any clocks, the subnode provides a
single clock with of_clk_hw_simple_get.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20201123143705.14277-1-jonathan@marek.caSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The ARM Cortex-A53 CPU cores and QGIC2 interrupt controller
(an implementation of the ARM GIC 2.0 specification) used in MSM8916
support virtualization, e.g. for KVM on Linux. However, so far it was
not possible to make use of this functionality, because Qualcomm's
proprietary "hyp" firmware blocks the EL2 mode of the CPU and only
allows booting Linux in EL1.

However, on devices without (firmware) secure boot there is no need
to rely on all of Qualcomm's firmware. The "hyp" firmware on MSM8916
seems simple enough that it can be replaced with an open-source
alternative created only based on trial and error - with some similar
EL2/EL1 initialization code adapted from Linux and U-Boot.

qhypstub [1] is such an open-source firmware for MSM8916 that
can be used as drop-in replacement for Qualcomm's "hyp" firmware.
It does not implement any hypervisor functionality.
Instead, it allows booting Linux/KVM (or other hypervisors) in EL2.

With Linux booting in EL2, KVM seems to be working just fine on MSM8916.
However, so far it is not possible to make use of the virtualization
features in the GICv2. To use KVM's VGICv2 code, the QGIC2 device tree
node needs additional resources (according to binding documentation):

  - The CPU interface region (second reg) must be at least 8 KiB large
    to access the GICC_DIR register (mapped at 0x1000 offset)
  - Virtual control/CPU interface register base and size
  - Hypervisor maintenance interrupt

Fortunately, the public APQ8016E TRM [2] provides the required information:

  - The CPU interface region (at 0x0B002000) actually has a size of 8 KiB
  - Virtual control/CPU interface register is at 0x0B001000/0x0B004000
  - Hypervisor maintenance interrupt is "PPI #0"
      Note: This is a bit strange since almost all other ARM SoCs use
            GIC_PPI 9 for this. However, I have verified that this is
            indeed the interrupt that fires when bits are set in GICH_HCR.

Add the additional resources to the QGIC2 device tree node in msm8916.dtsi.
There is no functional difference when Linux is started in EL1 since the
additional resources are ignored in that case.

With these changes (and qhypstub), KVM seems to be fully working on
the DragonBoard 410c (apq8016-sbc) and BQ Aquaris X5 (longcheer-l8910).

[1]: https://github.com/msm8916-mainline/qhypstub
[2]: https://developer.qualcomm.com/download/sd410/snapdragon-410e-technical-reference-manual.pdfAcked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210407163648.4708-1-stephan@gerhold.netSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add the device tree for the Quanta GBS BMC based on NPCM730 SoC.
Signed-off-by: George Hung <george.hung@quantatw.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210330071336.18370-1-george.hung@quantatw.comSigned-off-by: Joel Stanley <joel@jms.id.au>

Name the GPIOs to help userspace work with them. The names describe the
functionality the lines provide, not the net or ball name. This makes it
easier to share userspace code across different systems and makes the
use of the lines more obvious.
Signed-off-by: Nichole Wang <Nichole_Wang@wistron.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210330020808.830-1-Nichole_Wang@wistron.comSigned-off-by: Joel Stanley <joel@jms.id.au>

The 1S4U version of the Rainier system has only 4 fans. Create a new
tree, include the 4U version, and delete the 2 extra fans.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-23-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

The gpio and fan nodes reg properties cause dtc to emit a noisy warning
about relying on default sizes.
Signed-off-by: Joel Stanley <joel@jms.id.au>

Set watchdog 1 to pulse the fan watchdog circuit that drives the FAULT
pin of the MAX31785, resulting in fans running at full speed, if at
any point the BMC stops pulsing it, such as a BMC reboot at runtime.
Enable watchdog 2 for BMC reboots.
Signed-off-by: Matthew Barth <msbarth@linux.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-21-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

Add the RTC at the appropriate I2C bus and address.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-20-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

This commit adds support for-
- Presence GPIOs
- I2C control GPIOs
- Op-panel GPIOs (ex PHR)
Signed-off-by: Alpana Kumari <alpankum@in.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Brandon Wyman <bjwyman@gmail.com>
Link: https://lore.kernel.org/r/20210329150020.13632-19-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

Add UCD90320 chip to Everest device tree.
Signed-off-by: Jim Wright <jlwright@us.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-18-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

Add the i2c/pmbus power supply devices to the everest device tree.
Signed-off-by: Brandon Wyman <bjwyman@gmail.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-17-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

Add the pca9552 at address 0x61 on i2c14 behind mux0 channel 3 with the
4 GPIO fan presence inputs.
Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Brandon Wyman <bjwyman@gmail.com>
Link: https://lore.kernel.org/r/20210329150020.13632-16-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

Add additional CFAMs and re-number the existing engines for the
extra processors present on the Everest system.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-15-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

Add the max31785 configuration at address 0x52 on i2c14 behind mux0
channel 3.
Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-14-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

Tested and able to bound the devices with i2c driver.
Signed-off-by: Priyanga Ramasamy <priyanga24@in.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-13-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

The 4U fans didn't have the correct properties since the fan nodes
were redefined. Fix this by referencing each fan individually and
adding the differences to the 4U fans.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-12-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

The Maxim fan controller has six fans attached. Two of these were
missing from the description.
Signed-off-by: Joel Stanley <joel@jms.id.au>

Set watchdog 1 to pulse the fan watchdog circuit that drives the FAULT
pin of the MAX31785, resulting in fans running at full speed, if at
any point the BMC stops pulsing it, such as a BMC reboot at runtime.
Enable watchdog 2 for BMC reboots.
Signed-off-by: Matthew Barth <msbarth@linux.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210329150020.13632-11-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

This commit adds presence detect GPIO chips for various FRUs on
Rainier. Also, correct the I2C address for the tca9554.
Signed-off-by: Alpana Kumari <alpankum@in.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-10-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

Rainier has two dual-chip modules and therefore four CFAMs with their
associated engines. Add these to the devicetree with the i2c busses
that have devices on them.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210329150020.13632-5-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

Add a gpio-keys-polled section to the Rainier device tree for the fan
presence signals on the PCA9552 I2C device on bus 7.
Signed-off-by: Brandon Wyman <bjwyman@gmail.com>
Signed-off-by: Matthew Barth <msbarth@linux.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-4-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

These LEDs are directly connected to the BMC's GPIO bank.
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-3-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

This is a relatively low-cost AST2500-based Xeon E-2100/E-2200 series
mini-ITX board that we hope can provide a decent platform for OpenBMC
development.

This initial device-tree provides the necessary configuration for
basic BMC functionality such as host power control, serial console and
KVM support, and POST code snooping.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210401044232.9637-1-zev@bewilderbeest.netSigned-off-by: Joel Stanley <joel@jms.id.au>

Add device tree file for x530 board. This has an Armada 385 SoC. Has
NAND-flash for user storage and SPI for booting. Covers majority of x530
and GS980MX variants.
Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

AT91 dt for 5.13:

- two little fixes (typo, W=1)
- a change in gpio button keycode for recent boards

* tag 'at91-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: dts: at91: sama5d2: add ETB and ETM unit name
  ARM: dts: at91: change the key code of the gpio key
  ARM: dts: at91: Fix a typo

Link: https://lore.kernel.org/r/20210407114415.13180-1-nicolas.ferre@microchip.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'samsung-dt64-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt

Samsung DTS ARM64 changes for v5.13

Two cleanups in DTS without expected impact.

* tag 'samsung-dt64-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: dts: exynos: white-space cleanups
  arm64: dts: exynos: re-order Slim SSS clocks to match dtschema

Link: https://lore.kernel.org/r/20210407065828.7213-2-krzysztof.kozlowski@canonical.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Samsung DTS ARM changes for v5.13

1. Configure battery charger and front camera on GT-I9100 phone.
2. Fix in several boards the Maxim PMIC/MUIC/fuel gauge interrupt flags
   to match real type of interrupt coming from the device.
3. Correct DTS with dtschema.  This brings back the commit adding input
   clock to CMU in Exynos4412 Odroid which was reverted some time ago
   due to unsupported deferred probes (now supported and tested).

* tag 'samsung-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: Add front camera support to I9100
  ARM: dts: exynos: white-space cleanups
  ARM: dts: exynos: replace deprecated NTC/Murata compatibles
  ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid
  ARM: dts: s5pv210: correct fuel gauge interrupt trigger level on Fascinate family
  ARM: dts: exynos: correct PMIC interrupt trigger level on Snow
  ARM: dts: exynos: correct PMIC interrupt trigger level on SMDK5250
  ARM: dts: exynos: correct PMIC interrupt trigger level on P4 Note family
  ARM: dts: exynos: correct PMIC interrupt trigger level on Odroid X/U3 family
  ARM: dts: exynos: correct PMIC interrupt trigger level on Midas family
  ARM: dts: exynos: correct MUIC interrupt trigger level on Midas family
  ARM: dts: exynos: correct fuel gauge interrupt trigger level on Midas family
  ARM: dts: exynos: correct fuel gauge interrupt trigger level on P4 Note family
  ARM: dts: exynos: correct fuel gauge interrupt trigger level on GT-I9100
  ARM: dts: exynos: add charger supply for I9100

Link: https://lore.kernel.org/r/20210407065828.7213-1-krzysztof.kozlowski@canonical.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'omap-for-v5.13/dt-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt

Devicetree changes for omaps for v5.13

Mostly configures addtional devices for various boards, and
updates the gpio line names for beagle boards so userspace can
optionally find the right lines:

- Use unique gpio line names for am335x-pocketbeagle

- Update omap3-echo led configuration and add ath6kl node

- Fix indentation for am3 tscadc node

- Prepare motorola-cpcap-mapphone for power supply dtbs_check_parsing

- Use unique gpio line names for am335x-boneblack.dts

* tag 'omap-for-v5.13/dt-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: am335x-boneblack.dts: unique gpio-line-names
  ARM: dts: motorola-cpcap-mapphone: Prepare for dtbs_check parsing
  ARM: dts: am33xx-l4: fix tscadc@0 node indentation
  ARM: dts: omap3-echo: Add ath6kl node
  ARM: dts: omap3-echo: Update LED configuration
  ARM: dts: am335x-pocketbeagle: unique gpio-line-names

Link: https://lore.kernel.org/r/pull-1617703816-65652@atomide.com-2Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

arm64: dts: amlogic updates for v5.13
- new boards: MeCool KII & KIII, Minix NEO U9-H
- used fixed index for MMC devices

* tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  arm64: dts: meson: add initial device-tree for MeCool KIII Pro
  arm64: dts: meson: add initial device-tree for MeCool KII Pro
  dt-bindings: arm: amlogic: add MeCool KII/KIII Pro bindings
  arm64: dts: amlogic: Assign a fixed index to mmc devices
  arm64: dts: meson: add initial device-tree for Minix NEO U9-H
  dt-bindings: arm: amlogic: add support for the Minix NEO U9-H

Link: https://lore.kernel.org/r/7h5z10mjpp.fsf@baylibre.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'ti-k3-dt-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux into arm/dt

Devicetree changes for TI K3 platforms for v5.13 merge window:

* New SoCs:
  - AM642 mean for industrial control, motor control, remote IO, IoT gateway etc.
* New Boards:
  - AM65: Siemens SIMATIC IOT2050 advanced and basic boards
  - AM64: EVM and SK boards
* New peripherals:
  - AM65: watchdog
  - AM65,J721E: ICSSG
  - J7200: OSPI, GPIO
* Fixes:
  - AM65: pcie node fixup, ospi speed updates
  - J721e, J7200: MMC speed updates, ospi speed updates and compatibles fixups.

* tag 'ti-k3-dt-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux: (39 commits)
  arm64: dts: ti: k3-am64-main: Fix ospi compatible
  arm64: dts: ti: k3-j7200-mcu: Fix ospi compatible
  arm64: dts: ti: k3-j721e-mcu: Fix ospi compatible
  arm64: dts: ti: k3-j7200: Add support for higher speed modes and update delay select values for MMCSD subsystems
  arm64: dts: ti: k3-j7200-common-proc-board: Disable unused gpio modules
  arm64: dts: ti: k3-j7200: Add gpio nodes
  arm64: dts: ti: k3-am642-evm/sk: Add IPC sub-mailbox nodes
  arm64: dts: ti: k3-am64-main: Add mailbox cluster nodes
  arm64: dts: ti: k3-am64-main: Add hwspinlock node
  arm64: dts: ti: k3-am642: reserve gpio in mcu domain for firmware usage
  arm64: dts: ti: k3-am64: Add GPIO DT nodes
  arm64: dts: ti: k3-am64-evm/sk: Add OSPI flash DT node
  arm64: dts: ti: k3-am64-main: Add OSPI node
  arm64: dts: ti: k3-am64-main: Add ADC nodes
  arm64: dts: ti: k3-am642-evm: Add USB support
  arm64: dts: ti: k3-am64-main: Add DT node for USB subsystem
  arm64: dts: ti: Add support for Siemens IOT2050 boards
  dt-bindings: arm: ti: Add bindings for Siemens IOT2050 boards
  dt-bindings: Add Siemens vendor prefix
  arm64: dts: ti: k3-am642-evm: Add support for SPI EEPROM
  ...

Link: https://lore.kernel.org/r/20210405155336.smohb7uzkperqwuz@reflexSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Missing "chosen" node can cause issues when booting a kernel
with a boot-loader that doesn't create a chosen node if this
isn't present in the DTB since the decompressor relies on a
pre-existing chosen node to be available to insert the command
line and merge other ATAGS info.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Link: https://lore.kernel.org/r/20210405051658.26779-5-shc_work@mail.ru'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The memory node requires a unit-address, add it.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Link: https://lore.kernel.org/r/20210405051658.26779-4-shc_work@mail.ru'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Preferred node name for serial ports is "serial".
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Link: https://lore.kernel.org/r/20210405051658.26779-3-shc_work@mail.ru'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>