Skip to content

L
linux
Switch branch/tag
  1. 01 Mar, 2023 3 commits
    • Pablo Neira Ayuso's avatar
      netfilter: nft_quota: copy content when cloning expression · aabef97a
      Pablo Neira Ayuso authored 
      If the ruleset contains consumed quota, restore them accordingly.
Otherwise, listing after restoration shows never used items.

Restore the user-defined quota and flags too.

Fixes: ed0a0c60 ("netfilter: nft_quota: move stateful fields out of expression data")
Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      aabef97a
    • Pablo Neira Ayuso's avatar
      netfilter: nft_last: copy content when cloning expression · 860e8742
      Pablo Neira Ayuso authored 
      If the ruleset contains last timestamps, restore them accordingly.
Otherwise, listing after restoration shows never used items.

Fixes: 33a24de3 ("netfilter: nft_last: move stateful fields out of expression data")
Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      860e8742
    • Hangbin Liu's avatar
      selftests: nft_nat: ensuring the listening side is up before starting the client · 2067e7a0
      Hangbin Liu authored 
      The test_local_dnat_portonly() function initiates the client-side as
soon as it sets the listening side to the background. This could lead to
a race condition where the server may not be ready to listen. To ensure
that the server-side is up and running before initiating the
client-side, a delay is introduced to the test_local_dnat_portonly()
function.

Before the fix:
  # ./nft_nat.sh
  PASS: netns routing/connectivity: ns0-rthlYrBU can reach ns1-rthlYrBU and ns2-rthlYrBU
  PASS: ping to ns1-rthlYrBU was ip NATted to ns2-rthlYrBU
  PASS: ping to ns1-rthlYrBU OK after ip nat output chain flush
  PASS: ipv6 ping to ns1-rthlYrBU was ip6 NATted to ns2-rthlYrBU
  2023/02/27 04:11:03 socat[6055] E connect(5, AF=2 10.0.1.99:2000, 16): Connection refused
  ERROR: inet port rewrite

After the fix:
  # ./nft_nat.sh
  PASS: netns routing/connectivity: ns0-9sPJV6JJ can reach ns1-9sPJV6JJ and ns2-9sPJV6JJ
  PASS: ping to ns1-9sPJV6JJ was ip NATted to ns2-9sPJV6JJ
  PASS: ping to ns1-9sPJV6JJ OK after ip nat output chain flush
  PASS: ipv6 ping to ns1-9sPJV6JJ was ip6 NATted to ns2-9sPJV6JJ
  PASS: inet port rewrite without l3 address

Fixes: 282e5f8f ("netfilter: nat: really support inet nat without l3 address")
Signed-off-by: default avatarHangbin Liu <liuhangbin@gmail.com>
Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      2067e7a0
  3. 28 Feb, 2023 3 commits
  5. 27 Feb, 2023 19 commits
  7. 26 Feb, 2023 15 commits
    • Linus Torvalds's avatar
      Merge tag 'rproc-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux · f3a2439f
      Linus Torvalds authored 
      Pull remoteproc updates from Bjorn Andersson:

 - Support for PRU clients to acquire a control reference to the PRU
   instances is introduced, and the PRU now allows specifying
   firmware-name in Devicetree. sysfs is requested to be read-only when
   the remoteproc instance is consumed by another kernel driver

 - Support for the C7xv DSP on AM62A SoC is introduced

 - The Devicetree binding for the Qualcomm PAS devices are split up in
   multiple files, to better account for the differences in resources
   between them. A number of missing Devicetree bindings are added, and
   the Qualcomm WCNSS binding is converted to YAML

 - A few cleanups are introduced for the Mediatek SCP driver. And a
   sanity check of the firmware image is introduced in the Mediatek
   driver

 - For Qualcomm SC7280 ADSP support is added, MSM8953 gains ADSP and
   modem support, SM6115 and SM8550 gains ADSP, CDSP and modem support,
   and support for pronto v3 support (used on e.g. MSM8953) is added

 - The Qualcomm modem remoteproc driver is modified to use a no-map
   reserved-memory region for it's authentication metadata, in order to
   avoid fatal security violations caused by accesses from Linux during
   the authentication process

 - Support for separate loading of a Devicetree blob is added to the PAS
   driver, and support for the PAS driver to carve out DSM memory for
   the modem is added as well

 - The Qualcomm ADSP remoteproc driver gains support for mapping memory
   into specific range using the IOMMU. The sysmon driver is
   transitioned to strlcpy()

* tag 'rproc-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (69 commits)
  dt-bindings: mailbox: qcom,apcs-kpss-global: drop mbox-names from example
  dt-bindings: remoteproc: qcom,glink-edge: correct label description
  dt-bindings: remoteproc: qcom,glink-rpm-edge: convert to DT schema
  dt-bindings: remoteproc: qcom,sm8550-pas: correct power domains
  remoteproc: qcom_q6v5_pas: enable sm8550 adsp & cdsp autoboot
  dt-bindings: remoteproc: qcom: Add sm6115 pas yaml file
  remoteproc: qcom: pas: Add sm6115 remoteprocs
  remoteproc: qcom: pas: Adjust the phys addr wrt the mem region
  remoteproc: qcom: fix sparse warnings
  remoteproc: qcom: replace kstrdup with kstrndup
  remoteproc: mediatek: Check the SCP image format
  remoteproc: qcom_q6v5_mss: Use a carveout to authenticate modem headers
  Revert "remoteproc: qcom_q6v5_mss: map/unmap metadata region before/after use"
  dt-bindings: remoteproc: qcom,sc7280-mss-pil: Update memory-region
  dt-bindings: remoteproc: qcom,sc7180-mss-pil: Update memory-region
  dt-bindings: remoteproc: qcom,msm8996-mss-pil: Update memory region
  dt-bindings: remoteproc: qcom,q6v5: Move MSM8996 to schema
  remoteproc: qcom_q6v5_pas: add sm8550 adsp, cdsp & mpss compatible & data
  remoteproc: qcom_q6v5_pas: add support for assigning memory to firmware
  remoteproc: qcom_q6v5_pas: add support for dtb co-firmware loading
  ...
      f3a2439f
    • Linus Torvalds's avatar
      Merge tag 'rpmsg-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux · cc38a46d
      Linus Torvalds authored 
      Pull rpmsg updates from Bjorn Andersson:

 - rpmsg ctrl and char driver locking is ensure ordering in cases where
   the communication link is being torn down in parallel with calls to
   open(2) or poll(2)

 - The glink driver is refactored, to move rpm/smem-specifics out of the
   common logic and better suite further improvements, such as
   transports without a mailbox controller. The handling of remoteproc
   shutdown is improved, to fail clients immediately instead of having
   them to wait for timeouts. A driver_override memory leak is corrected
   and a few spelling improvements are introduced

 - glink_ssr is transitioned off strlcpy() and "gpr" is added as a valid
   child node of the glink-edge DT binding

* tag 'rpmsg-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  rpmsg: glink: Release driver_override
  rpmsg: glink: Avoid infinite loop on intent for missing channel
  rpmsg: glink: Fix GLINK command prefix
  rpmsg: glink: Fix spelling of peek
  rpmsg: glink: Cancel pending intent requests at removal
  rpmsg: glink: Fail qcom_glink_tx() once remove has been initiated
  rpmsg: glink: Move irq and mbox handling to transports
  rpmsg: glink: rpm: Wrap driver context
  rpmsg: glink: smem: Wrap driver context
  rpmsg: glink: Extract tx kick operation
  rpmsg: glink: Include types in qcom_glink_native.h
  rpmsg: ctrl: Add lock to rpmsg_ctrldev_remove
  rpmsg: char: Add lock to avoid race when rpmsg device is released
  rpmsg: move from strlcpy with unused retval to strscpy
  dt-bindings: remoteproc: qcom,glink-edge: add GPR node
      cc38a46d
    • Linus Torvalds's avatar
      Merge tag 'hwlock-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux · 9b0b0dd8
      Linus Torvalds authored 
      Pull hwspinlock updates from Bjorn Andersson:
 "This updates the sun6i DT binding to allow (and require) #hwlock-cells
  and makes use of device_match_of_node() to slight clean up the
  condition in of_hwspin_lock_get_id()"

* tag 'hwlock-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  dt-bindings: hwlock: sun6i: Add #hwlock-cells to example
  dt-bindings: hwlock: sun6i: Add missing #hwlock-cells
  hwspinlock: Use device_match_of_node()
      9b0b0dd8
    • Linus Torvalds's avatar
      Merge tag 'kbuild-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild · 498a1cf9
      Linus Torvalds authored 
      Pull Kbuild updates from Masahiro Yamada:

 - Change V=1 option to print both short log and full command log

 - Allow V=1 and V=2 to be combined as V=12

 - Make W=1 detect wrong .gitignore files

 - Tree-wide cleanups for unused command line arguments passed to Clang

 - Stop using -Qunused-arguments with Clang

 - Make scripts/setlocalversion handle only correct release tags instead
   of any arbitrary annotated tag

 - Create Debian and RPM source packages without cleaning the source
   tree

 - Various cleanups for packaging

* tag 'kbuild-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (74 commits)
  kbuild: rpm-pkg: remove unneeded KERNELRELEASE from modules/headers_install
  docs: kbuild: remove description of KBUILD_LDS_MODULE
  .gitattributes: use 'dts' diff driver for *.dtso files
  kbuild: deb-pkg: improve the usability of source package
  kbuild: deb-pkg: fix binary-arch and clean in debian/rules
  kbuild: tar-pkg: use tar rules in scripts/Makefile.package
  kbuild: make perf-tar*-src-pkg work without relying on git
  kbuild: deb-pkg: switch over to source format 3.0 (quilt)
  kbuild: deb-pkg: make .orig tarball a hard link if possible
  kbuild: deb-pkg: hide KDEB_SOURCENAME from Makefile
  kbuild: srcrpm-pkg: create source package without cleaning
  kbuild: rpm-pkg: build binary packages from source rpm
  kbuild: deb-pkg: create source package without cleaning
  kbuild: add a tool to list files ignored by git
  Documentation/llvm: add Chimera Linux, Google and Meta datacenters
  setlocalversion: use only the correct release tag for git-describe
  setlocalversion: clean up the construction of version output
  .gitignore: ignore *.cover and *.mbx
  kbuild: remove --include-dir MAKEFLAG from top Makefile
  kbuild: fix trivial typo in comment
  ...
      498a1cf9
    • Linus Torvalds's avatar
      Merge tag 'media/v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media · 4b8c673b
      Linus Torvalds authored 
      Pull media updates from Mauro Carvalho Chehab:

 - Removal of several VB1-only deprecated drivers: cpia2, fsl-viu, meye,
   stkwebcam, tm6000, vpfe_capture and zr364xx

 - saa7146 recovered from staging/deprecated. We opted to give ti a
   chance, and, instead of deprecating it, the intention is to write
   patches migrating it from VB1 to VB2.

 - av7110 returned from staging/deprecated/ to staging/ as we're not
   planning on dropping it any time soon

 - media controller API has gained experimental support for G_ROUTING
   and streams API. No drivers use it right now. We're planning to add
   one after -rc1, giving some time to experience the API and eventually
   have changes during the next development cycle

 - New sensor drivers: imx296, imx415, ov8858

 - Atomisp had lots of changes, specially on its sensor's interface,
   making atomisp sensor drivers closer to normal sensor drivers

 - media controller kAPI has gained some helpers to traverse pipelines

 - uvcvideo now better support power line control

 - lots of bug fixes, cleanups and driver improvements

* tag 'media/v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (296 commits)
  media: imx-mipi-csis: Check csis_fmt validity before use
  media: v4l2-subdev.c: clear stream field
  media: v4l2-ctrls-api.c: move ctrl->is_new = 1 to the correct line
  media: Revert "media: saa7146: deprecate hexium_gemini/orion, mxb and ttpci"
  media: Revert "media: av7110: move to staging/media/deprecated/saa7146"
  media: imx-pxp: convert to regmap
  media: imx-pxp: Use non-threaded IRQ
  media: imx-pxp: Introduce pxp_read() and pxp_write() wrappers
  media: imx-pxp: Implement frame size enumeration
  media: imx-pxp: Pass pixel format value to find_format()
  media: imx-pxp: Add media controller support
  media: imx-pxp: Don't set bus_info manually in .querycap()
  media: imx-pxp: Sort headers alphabetically
  media: imx-pxp: add support for i.MX7D
  media: imx-pxp: make data_path_ctrl0 platform dependent
  media: imx-pxp: disable LUT block
  media: imx-pxp: explicitly disable unused blocks
  media: imx-pxp: extract helper function to setup data path
  media: imx-pxp: detect PXP version
  media: dt-bindings: media: fsl-pxp: convert to yaml
  ...
      4b8c673b
    • Linus Torvalds's avatar
      Documentation: simplify and clarify DCO contribution example language · d4563201
      Linus Torvalds authored 
      Long long ago, in a more innocent time, Greg wrote the clarification for
how the DCO should work and that you couldn't make anonymous
contributions, because the sign-off needed to be something we could
check back with.

It was 2006, and nobody reacted to the wording, the whole Facebook 'real
name' controversy was a decade in the future, and nobody even thought
about it.  And despite the language, we've always accepted nicknames and
that language was never meant to be any kind of exclusionary wording.

In fact, even when it became a discussion in other adjacent projects,
apparently nobody even thought to just clarify the language in the
kernel docs, and instead we had projects like the CNCF that had long
discussions about it, and wrote their own clarifications [1] of it.

Just simplify the wording to the point where it shouldn't be causing
unnecessary angst and pain, or scare away people who go by preferred
naming.

Link: https://github.com/cncf/foundation/blob/659fd32c86dc/dco-guidelines.md [1]
Fixes: af45f32d ("We can not allow anonymous contributions to the kernel")
Acked-by: default avatarGreg KH <gregkh@linuxfoundation.org>
Acked-by: default avatarMichael Dolan <mdolan@linuxfoundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      d4563201
    • Russell King (Oracle)'s avatar
      net: dsa: ocelot_ext: remove unnecessary phylink.h include · 724337be
      Russell King (Oracle) authored 
      During review of ocelot_ext, it created a private phylink instance
that wasn't necessary. This was removed for subsequent postings,
but the include file seems to have been left behind. Remove it.
Signed-off-by: default avatarRussell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      724337be
    • David S. Miller's avatar
      Merge branch 'net-ocelot-switch-regressions' · 5f79f12c
      David S. Miller authored 
      Vladimir Oltean says:

====================
Regressions in Ocelot switch drivers

These are 3 patches which resolve a regression in the Seville driver,
one in the Felix driver and a generic one which affects any kernel
compiled with 2 Kconfig options enabled. All of them have in common my
lack of attention during review/testing. The patches touch the DSA, MFD
and MDIO drivers for Ocelot. I think it would be preferable if all
patches went through netdev (with Lee's Ack).
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5f79f12c
    • Vladimir Oltean's avatar
      net: mscc: ocelot: fix duplicate driver name error · ef1a99c6
      Vladimir Oltean authored 
      When compiling a kernel which has both CONFIG_NET_DSA_MSCC_OCELOT_EXT
and CONFIG_MSCC_OCELOT_SWITCH enabled, the following error message will
be printed:

[    5.266588] Error: Driver 'ocelot-switch' is already registered, aborting...

Rename the ocelot_ext.c driver to "ocelot-ext-switch" to avoid the name
duplication, and update the mfd_cell entry for its resources.

Fixes: 3d7316ac ("net: dsa: ocelot: add external ocelot switch control")
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ef1a99c6
    • Vladimir Oltean's avatar
      net: dsa: felix: fix internal MDIO controller resource length · 940af261
      Vladimir Oltean authored 
      The blamed commit did not properly convert the resource start/end format
into the DEFINE_RES_MEM_NAMED() start/length format, resulting in a
resource for vsc9959_imdio_res which is much longer than expected:

$ cat /proc/iomem
1f8000000-1f815ffff : pcie@1f0000000
  1f8140000-1f815ffff : 0000:00:00.5
    1f8148030-1f815006f : imdio

vs (correct)

$ cat /proc/iomem
1f8000000-1f815ffff : pcie@1f0000000
  1f8140000-1f815ffff : 0000:00:00.5
    1f8148030-1f814803f : imdio

Luckily it's not big enough to exceed the size of the parent resource
(pci_resource_end(pdev, VSC9959_IMDIO_PCI_BAR)), and it doesn't overlap
with anything else that the Linux driver uses currently, so the larger
than expected size isn't a practical problem that I can see. Although it
is clearly wrong in the /proc/iomem output.

Fixes: 044d447a ("net: dsa: felix: use DEFINE_RES_MEM_NAMED for resources")
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      940af261
    • Vladimir Oltean's avatar
      net: dsa: seville: ignore mscc-miim read errors from Lynx PCS · 0322ef49
      Vladimir Oltean authored 
      During the refactoring in the commit below, vsc9953_mdio_read() was
replaced with mscc_miim_read(), which has one extra step: it checks for
the MSCC_MIIM_DATA_ERROR bits before returning the result.

On T1040RDB, there are 8 QSGMII PCSes belonging to the switch, and they
are organized in 2 groups. First group responds to MDIO addresses 4-7
because QSGMIIACR1[MDEV_PORT] is 1, and the second group responds to
MDIO addresses 8-11 because QSGMIIBCR1[MDEV_PORT] is 2. I have double
checked that these values are correctly set in the SERDES, as well as
PCCR1[QSGMA_CFG] and PCCR1[QSGMB_CFG] are both 0b01.

mscc_miim_read: phyad 8 reg 0x1 MIIM_DATA 0x2d
mscc_miim_read: phyad 8 reg 0x5 MIIM_DATA 0x5801
mscc_miim_read: phyad 8 reg 0x1 MIIM_DATA 0x2d
mscc_miim_read: phyad 8 reg 0x5 MIIM_DATA 0x5801
mscc_miim_read: phyad 9 reg 0x1 MIIM_DATA 0x2d
mscc_miim_read: phyad 9 reg 0x5 MIIM_DATA 0x5801
mscc_miim_read: phyad 9 reg 0x1 MIIM_DATA 0x2d
mscc_miim_read: phyad 9 reg 0x5 MIIM_DATA 0x5801
mscc_miim_read: phyad 10 reg 0x1 MIIM_DATA 0x2d
mscc_miim_read: phyad 10 reg 0x5 MIIM_DATA 0x5801
mscc_miim_read: phyad 10 reg 0x1 MIIM_DATA 0x2d
mscc_miim_read: phyad 10 reg 0x5 MIIM_DATA 0x5801
mscc_miim_read: phyad 11 reg 0x1 MIIM_DATA 0x2d
mscc_miim_read: phyad 11 reg 0x5 MIIM_DATA 0x5801
mscc_miim_read: phyad 11 reg 0x1 MIIM_DATA 0x2d
mscc_miim_read: phyad 11 reg 0x5 MIIM_DATA 0x5801
mscc_miim_read: phyad 4 reg 0x1 MIIM_DATA 0x3002d, ERROR
mscc_miim_read: phyad 4 reg 0x5 MIIM_DATA 0x3da01, ERROR
mscc_miim_read: phyad 5 reg 0x1 MIIM_DATA 0x3002d, ERROR
mscc_miim_read: phyad 5 reg 0x5 MIIM_DATA 0x35801, ERROR
mscc_miim_read: phyad 5 reg 0x1 MIIM_DATA 0x3002d, ERROR
mscc_miim_read: phyad 5 reg 0x5 MIIM_DATA 0x35801, ERROR
mscc_miim_read: phyad 6 reg 0x1 MIIM_DATA 0x3002d, ERROR
mscc_miim_read: phyad 6 reg 0x5 MIIM_DATA 0x35801, ERROR
mscc_miim_read: phyad 6 reg 0x1 MIIM_DATA 0x3002d, ERROR
mscc_miim_read: phyad 6 reg 0x5 MIIM_DATA 0x35801, ERROR
mscc_miim_read: phyad 7 reg 0x1 MIIM_DATA 0x3002d, ERROR
mscc_miim_read: phyad 7 reg 0x5 MIIM_DATA 0x35801, ERROR
mscc_miim_read: phyad 7 reg 0x1 MIIM_DATA 0x3002d, ERROR
mscc_miim_read: phyad 7 reg 0x5 MIIM_DATA 0x35801, ERROR

As can be seen, the data in MIIM_DATA is still valid despite having the
MSCC_MIIM_DATA_ERROR bits set. The driver as introduced in commit
84705fc1 ("net: dsa: felix: introduce support for Seville VSC9953
switch") was ignoring these bits, perhaps deliberately (although
unbeknownst to me).

This is an old IP and the hardware team cannot seem to be able to help
me track down a plausible reason for these failures. I'll keep
investigating, but in the meantime, this is a direct regression which
must be restored to a working state.

The only thing I can do is keep ignoring the errors as before.

Fixes: b9965845 ("net: dsa: ocelot: felix: utilize shared mscc-miim driver for indirect MDIO access")
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0322ef49
    • David S. Miller's avatar
      Merge branch 'net-sched-action-bind' · 3fa10563
      David S. Miller authored 
      Pedro Tammela says:

====================
net/sched: fix action bind logic

Some actions are not handling the case where an action can be created and bound to a
filter independently. These actions are checking for parameters only passed
in the netlink message for create/change/replace, which then errors out
for valid uses like:
tc filter ... action pedit index 1

In the iproute2 side, we saw a couple of actions with their parsers
broken when passing "index 1" as the only action argument, while the kernel
side accepted it correctly. We fixed those as well.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3fa10563
    • Pedro Tammela's avatar
      net/sched: act_sample: fix action bind logic · 4a20056a
      Pedro Tammela authored 
      The TC architecture allows filters and actions to be created independently.
In filters the user can reference action objects using:
tc action add action sample ... index 1
tc filter add ... action pedit index 1

In the current code for act_sample this is broken as it checks netlink
attributes for create/update before actually checking if we are binding to an
existing action.

tdc results:
1..29
ok 1 9784 - Add valid sample action with mandatory arguments
ok 2 5c91 - Add valid sample action with mandatory arguments and continue control action
ok 3 334b - Add valid sample action with mandatory arguments and drop control action
ok 4 da69 - Add valid sample action with mandatory arguments and reclassify control action
ok 5 13ce - Add valid sample action with mandatory arguments and pipe control action
ok 6 1886 - Add valid sample action with mandatory arguments and jump control action
ok 7 7571 - Add sample action with invalid rate
ok 8 b6d4 - Add sample action with mandatory arguments and invalid control action
ok 9 a874 - Add invalid sample action without mandatory arguments
ok 10 ac01 - Add invalid sample action without mandatory argument rate
ok 11 4203 - Add invalid sample action without mandatory argument group
ok 12 14a7 - Add invalid sample action without mandatory argument group
ok 13 8f2e - Add valid sample action with trunc argument
ok 14 45f8 - Add sample action with maximum rate argument
ok 15 ad0c - Add sample action with maximum trunc argument
ok 16 83a9 - Add sample action with maximum group argument
ok 17 ed27 - Add sample action with invalid rate argument
ok 18 2eae - Add sample action with invalid group argument
ok 19 6ff3 - Add sample action with invalid trunc size
ok 20 2b2a - Add sample action with invalid index
ok 21 dee2 - Add sample action with maximum allowed index
ok 22 560e - Add sample action with cookie
ok 23 704a - Replace existing sample action with new rate argument
ok 24 60eb - Replace existing sample action with new group argument
ok 25 2cce - Replace existing sample action with new trunc argument
ok 26 59d1 - Replace existing sample action with new control argument
ok 27 0a6e - Replace sample action with invalid goto chain control
ok 28 3872 - Delete sample action with valid index
ok 29 a394 - Delete sample action with invalid index

Fixes: 5c5670fa ("net/sched: Introduce sample tc action")
Reviewed-by: default avatarJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: default avatarPedro Tammela <pctammela@mojatatu.com>
Reviewed-by: default avatarSimon Horman <simon.horman@corigine.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4a20056a
    • Pedro Tammela's avatar
      net/sched: act_mpls: fix action bind logic · e88d78a7
      Pedro Tammela authored 
      The TC architecture allows filters and actions to be created independently.
In filters the user can reference action objects using:
tc action add action mpls ... index 1
tc filter add ... action mpls index 1

In the current code for act_mpls this is broken as it checks netlink
attributes for create/update before actually checking if we are binding to an
existing action.

tdc results:
1..53
ok 1 a933 - Add MPLS dec_ttl action with pipe opcode
ok 2 08d1 - Add mpls dec_ttl action with pass opcode
ok 3 d786 - Add mpls dec_ttl action with drop opcode
ok 4 f334 - Add mpls dec_ttl action with reclassify opcode
ok 5 29bd - Add mpls dec_ttl action with continue opcode
ok 6 48df - Add mpls dec_ttl action with jump opcode
ok 7 62eb - Add mpls dec_ttl action with trap opcode
ok 8 09d2 - Add mpls dec_ttl action with opcode and cookie
ok 9 c170 - Add mpls dec_ttl action with opcode and cookie of max length
ok 10 9118 - Add mpls dec_ttl action with invalid opcode
ok 11 6ce1 - Add mpls dec_ttl action with label (invalid)
ok 12 352f - Add mpls dec_ttl action with tc (invalid)
ok 13 fa1c - Add mpls dec_ttl action with ttl (invalid)
ok 14 6b79 - Add mpls dec_ttl action with bos (invalid)
ok 15 d4c4 - Add mpls pop action with ip proto
ok 16 91fb - Add mpls pop action with ip proto and cookie
ok 17 92fe - Add mpls pop action with mpls proto
ok 18 7e23 - Add mpls pop action with no protocol (invalid)
ok 19 6182 - Add mpls pop action with label (invalid)
ok 20 6475 - Add mpls pop action with tc (invalid)
ok 21 067b - Add mpls pop action with ttl (invalid)
ok 22 7316 - Add mpls pop action with bos (invalid)
ok 23 38cc - Add mpls push action with label
ok 24 c281 - Add mpls push action with mpls_mc protocol
ok 25 5db4 - Add mpls push action with label, tc and ttl
ok 26 7c34 - Add mpls push action with label, tc ttl and cookie of max length
ok 27 16eb - Add mpls push action with label and bos
ok 28 d69d - Add mpls push action with no label (invalid)
ok 29 e8e4 - Add mpls push action with ipv4 protocol (invalid)
ok 30 ecd0 - Add mpls push action with out of range label (invalid)
ok 31 d303 - Add mpls push action with out of range tc (invalid)
ok 32 fd6e - Add mpls push action with ttl of 0 (invalid)
ok 33 19e9 - Add mpls mod action with mpls label
ok 34 1fde - Add mpls mod action with max mpls label
ok 35 0c50 - Add mpls mod action with mpls label exceeding max (invalid)
ok 36 10b6 - Add mpls mod action with mpls label of MPLS_LABEL_IMPLNULL (invalid)
ok 37 57c9 - Add mpls mod action with mpls min tc
ok 38 6872 - Add mpls mod action with mpls max tc
ok 39 a70a - Add mpls mod action with mpls tc exceeding max (invalid)
ok 40 6ed5 - Add mpls mod action with mpls ttl
ok 41 77c1 - Add mpls mod action with mpls ttl and cookie
ok 42 b80f - Add mpls mod action with mpls max ttl
ok 43 8864 - Add mpls mod action with mpls min ttl
ok 44 6c06 - Add mpls mod action with mpls ttl of 0 (invalid)
ok 45 b5d8 - Add mpls mod action with mpls ttl exceeding max (invalid)
ok 46 451f - Add mpls mod action with mpls max bos
ok 47 a1ed - Add mpls mod action with mpls min bos
ok 48 3dcf - Add mpls mod action with mpls bos exceeding max (invalid)
ok 49 db7c - Add mpls mod action with protocol (invalid)
ok 50 b070 - Replace existing mpls push action with new ID
ok 51 95a9 - Replace existing mpls push action with new label, tc, ttl and cookie
ok 52 6cce - Delete mpls pop action
ok 53 d138 - Flush mpls actions

Fixes: 2a2ea508 ("net: sched: add mpls manipulation actions to TC")
Reviewed-by: default avatarJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: default avatarPedro Tammela <pctammela@mojatatu.com>
Reviewed-by: default avatarSimon Horman <simon.horman@corigine.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e88d78a7
    • Pedro Tammela's avatar
      net/sched: act_pedit: fix action bind logic · e9e42292
      Pedro Tammela authored 
      The TC architecture allows filters and actions to be created independently.
In filters the user can reference action objects using:
tc action add action pedit ... index 1
tc filter add ... action pedit index 1

In the current code for act_pedit this is broken as it checks netlink
attributes for create/update before actually checking if we are binding to an
existing action.

tdc results:
1..69
ok 1 319a - Add pedit action that mangles IP TTL
ok 2 7e67 - Replace pedit action with invalid goto chain
ok 3 377e - Add pedit action with RAW_OP offset u32
ok 4 a0ca - Add pedit action with RAW_OP offset u32 (INVALID)
ok 5 dd8a - Add pedit action with RAW_OP offset u16 u16
ok 6 53db - Add pedit action with RAW_OP offset u16 (INVALID)
ok 7 5c7e - Add pedit action with RAW_OP offset u8 add value
ok 8 2893 - Add pedit action with RAW_OP offset u8 quad
ok 9 3a07 - Add pedit action with RAW_OP offset u8-u16-u8
ok 10 ab0f - Add pedit action with RAW_OP offset u16-u8-u8
ok 11 9d12 - Add pedit action with RAW_OP offset u32 set u16 clear u8 invert
ok 12 ebfa - Add pedit action with RAW_OP offset overflow u32 (INVALID)
ok 13 f512 - Add pedit action with RAW_OP offset u16 at offmask shift set
ok 14 c2cb - Add pedit action with RAW_OP offset u32 retain value
ok 15 1762 - Add pedit action with RAW_OP offset u8 clear value
ok 16 bcee - Add pedit action with RAW_OP offset u8 retain value
ok 17 e89f - Add pedit action with RAW_OP offset u16 retain value
ok 18 c282 - Add pedit action with RAW_OP offset u32 clear value
ok 19 c422 - Add pedit action with RAW_OP offset u16 invert value
ok 20 d3d3 - Add pedit action with RAW_OP offset u32 invert value
ok 21 57e5 - Add pedit action with RAW_OP offset u8 preserve value
ok 22 99e0 - Add pedit action with RAW_OP offset u16 preserve value
ok 23 1892 - Add pedit action with RAW_OP offset u32 preserve value
ok 24 4b60 - Add pedit action with RAW_OP negative offset u16/u32 set value
ok 25 a5a7 - Add pedit action with LAYERED_OP eth set src
ok 26 86d4 - Add pedit action with LAYERED_OP eth set src & dst
ok 27 f8a9 - Add pedit action with LAYERED_OP eth set dst
ok 28 c715 - Add pedit action with LAYERED_OP eth set src (INVALID)
ok 29 8131 - Add pedit action with LAYERED_OP eth set dst (INVALID)
ok 30 ba22 - Add pedit action with LAYERED_OP eth type set/clear sequence
ok 31 dec4 - Add pedit action with LAYERED_OP eth set type (INVALID)
ok 32 ab06 - Add pedit action with LAYERED_OP eth add type
ok 33 918d - Add pedit action with LAYERED_OP eth invert src
ok 34 a8d4 - Add pedit action with LAYERED_OP eth invert dst
ok 35 ee13 - Add pedit action with LAYERED_OP eth invert type
ok 36 7588 - Add pedit action with LAYERED_OP ip set src
ok 37 0fa7 - Add pedit action with LAYERED_OP ip set dst
ok 38 5810 - Add pedit action with LAYERED_OP ip set src & dst
ok 39 1092 - Add pedit action with LAYERED_OP ip set ihl & dsfield
ok 40 02d8 - Add pedit action with LAYERED_OP ip set ttl & protocol
ok 41 3e2d - Add pedit action with LAYERED_OP ip set ttl (INVALID)
ok 42 31ae - Add pedit action with LAYERED_OP ip ttl clear/set
ok 43 486f - Add pedit action with LAYERED_OP ip set duplicate fields
ok 44 e790 - Add pedit action with LAYERED_OP ip set ce, df, mf, firstfrag, nofrag fields
ok 45 cc8a - Add pedit action with LAYERED_OP ip set tos
ok 46 7a17 - Add pedit action with LAYERED_OP ip set precedence
ok 47 c3b6 - Add pedit action with LAYERED_OP ip add tos
ok 48 43d3 - Add pedit action with LAYERED_OP ip add precedence
ok 49 438e - Add pedit action with LAYERED_OP ip clear tos
ok 50 6b1b - Add pedit action with LAYERED_OP ip clear precedence
ok 51 824a - Add pedit action with LAYERED_OP ip invert tos
ok 52 106f - Add pedit action with LAYERED_OP ip invert precedence
ok 53 6829 - Add pedit action with LAYERED_OP beyond ip set dport & sport
ok 54 afd8 - Add pedit action with LAYERED_OP beyond ip set icmp_type & icmp_code
ok 55 3143 - Add pedit action with LAYERED_OP beyond ip set dport (INVALID)
ok 56 815c - Add pedit action with LAYERED_OP ip6 set src
ok 57 4dae - Add pedit action with LAYERED_OP ip6 set dst
ok 58 fc1f - Add pedit action with LAYERED_OP ip6 set src & dst
ok 59 6d34 - Add pedit action with LAYERED_OP ip6 dst retain value (INVALID)
ok 60 94bb - Add pedit action with LAYERED_OP ip6 traffic_class
ok 61 6f5e - Add pedit action with LAYERED_OP ip6 flow_lbl
ok 62 6795 - Add pedit action with LAYERED_OP ip6 set payload_len, nexthdr, hoplimit
ok 63 1442 - Add pedit action with LAYERED_OP tcp set dport & sport
ok 64 b7ac - Add pedit action with LAYERED_OP tcp sport set (INVALID)
ok 65 cfcc - Add pedit action with LAYERED_OP tcp flags set
ok 66 3bc4 - Add pedit action with LAYERED_OP tcp set dport, sport & flags fields
ok 67 f1c8 - Add pedit action with LAYERED_OP udp set dport & sport
ok 68 d784 - Add pedit action with mixed RAW/LAYERED_OP #1
ok 69 70ca - Add pedit action with mixed RAW/LAYERED_OP #2

Fixes: 71d0ed70 ("net/act_pedit: Support using offset relative to the conventional network headers")
Fixes: f67169fe ("net/sched: act_pedit: fix WARN() in the traffic path")
Reviewed-by: default avatarJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: default avatarPedro Tammela <pctammela@mojatatu.com>
Reviewed-by: default avatarSimon Horman <simon.horman@corigine.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e9e42292
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7