Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, tsc: Fix a preemption leak in restore_sched_clock_state()
  sched: Move sched_avg_update() to update_cpu_load()

Doh, a real life genuine preemption leak..

This caused a suspend failure.

Reported-bisected-and-tested-by-the-invaluable: Jeff Chua <jeff.chua.linux@gmail.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Nico Schottelius <nico-linux-20100709@schottelius.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Florian Pritz <flo@xssn.at>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: <stable@kernel.org> # Greg, please apply after: cd7240c0 ("x86, tsc, sched: Recompute cyc2ns_offset's during resume from")
sleep states
LKML-Reference: <1284150773.402.122.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel:
  drm/i915: don't enable self-refresh on Ironlake
  drm/i915: Double check that the wait_request is not pending before warning
  Revert "drm/i915: Warn if we run out of FIFO space for a mode"
  Revert "drm/i915: Allow LVDS on pipe A on gen4+"
  Revert "drm/i915: Enable RC6 on Ironlake."

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: log IO completion workqueue is a high priority queue
  xfs: prevent reading uninitialized stack memory

A real life genuine preemption leak..
Reported-and-tested-by: Jeff Chua <jeff.chua.linux@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The workqueue implementation in 2.6.36-rcX has changed, resulting
in the workqueues no longer having dedicated threads for work
processing. This has caused severe livelocks under heavy parallel
create workloads because the log IO completions have been getting
held up behind metadata IO completions.  Hence log commits would
stall, memory allocation would stall because pages could not be
cleaned, and lock contention on the AIL during inode IO completion
processing was being seen to slow everything down even further.

By making the log Io completion workqueue a high priority workqueue,
they are queued ahead of all data/metadata IO completions and
processed before the data/metadata completions. Hence the log never
gets stalled, and operations needed to clean memory can continue as
quickly as possible. This avoids the livelock conditions and allos
the system to keep running under heavy load as per normal.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>

An execve with a very large total of argument/environment strings
can take a really long time in the execve system call.  It runs
uninterruptibly to count and copy all the strings.  This change
makes it abort the exec quickly if sent a SIGKILL.

Note that this is the conservative change, to interrupt only for
SIGKILL, by using fatal_signal_pending().  It would be perfectly
correct semantics to let any signal interrupt the string-copying in
execve, i.e. use signal_pending() instead of fatal_signal_pending().
We'll save that change for later, since it could have user-visible
consequences, such as having a timer set too quickly make it so that
an execve can never complete, though it always happened to work before.
Signed-off-by: Roland McGrath <roland@redhat.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This adds a preemption point during the copying of the argument and
environment strings for execve, in copy_strings().  There is already
a preemption point in the count() loop, so this doesn't add any new
points in the abstract sense.

When the total argument+environment strings are very large, the time
spent copying them can be much more than a normal user time slice.
So this change improves the interactivity of the rest of the system
when one process is doing an execve with very large arguments.
Signed-off-by: Roland McGrath <roland@redhat.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The CONFIG_STACK_GROWSDOWN variant of setup_arg_pages() does not
check the size of the argument/environment area on the stack.
When it is unworkably large, shift_arg_pages() hits its BUG_ON.
This is exploitable with a very large RLIMIT_STACK limit, to
create a crash pretty easily.

Check that the initial stack is not too large to make it possible
to map in any executable.  We're not checking that the actual
executable (or intepreter, for binfmt_elf) will fit.  So those
mappings might clobber part of the initial stack mapping.  But
that is just userland lossage that userland made happen, not a
kernel problem.
Signed-off-by: Roland McGrath <roland@redhat.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'kvm-updates/2.6.36' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Perform hardware_enable in CPU_STARTING callback
  KVM: i8259: fix migration
  KVM: fix i8259 oops when no vcpus are online
  KVM: x86 emulator: fix regression with cmpxchg8b on i386 hosts

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  tracing: t_start: reset FTRACE_ITER_HASH in case of seek/pread
  perf symbols: Fix multiple initialization of symbol system
  perf: Fix CPU hotplug
  perf, trace: Fix module leak
  tracing/kprobe: Fix handling of C-unlike argument names
  tracing/kprobes: Fix handling of argument names
  perf probe: Fix handling of arguments names
  perf probe: Fix return probe support
  tracing/kprobe: Fix a memory leak in error case
  tracing: Do not allow llseek to set_ftrace_filter

Fix a bug in keyctl_session_to_parent() whereby it tries to check the ownership
of the parent process's session keyring whether or not the parent has a session
keyring [CVE-2010-2960].

This results in the following oops:

  BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0
  IP: [<ffffffff811ae4dd>] keyctl_session_to_parent+0x251/0x443
  ...
  Call Trace:
   [<ffffffff811ae2f3>] ? keyctl_session_to_parent+0x67/0x443
   [<ffffffff8109d286>] ? __do_fault+0x24b/0x3d0
   [<ffffffff811af98c>] sys_keyctl+0xb4/0xb8
   [<ffffffff81001eab>] system_call_fastpath+0x16/0x1b

if the parent process has no session keyring.

If the system is using pam_keyinit then it mostly protected against this as all
processes derived from a login will have inherited the session keyring created
by pam_keyinit during the log in procedure.

To test this, pam_keyinit calls need to be commented out in /etc/pam.d/.
Reported-by: Tavis Ormandy <taviso@cmpxchg8b.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Tavis Ormandy <taviso@cmpxchg8b.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There's an protected access to the parent process's credentials in the middle
of keyctl_session_to_parent().  This results in the following RCU warning:

  ===================================================
  [ INFO: suspicious rcu_dereference_check() usage. ]
  ---------------------------------------------------
  security/keys/keyctl.c:1291 invoked rcu_dereference_check() without protection!

  other info that might help us debug this:

  rcu_scheduler_active = 1, debug_locks = 0
  1 lock held by keyctl-session-/2137:
   #0:  (tasklist_lock){.+.+..}, at: [<ffffffff811ae2ec>] keyctl_session_to_parent+0x60/0x236

  stack backtrace:
  Pid: 2137, comm: keyctl-session- Not tainted 2.6.36-rc2-cachefs+ #1
  Call Trace:
   [<ffffffff8105606a>] lockdep_rcu_dereference+0xaa/0xb3
   [<ffffffff811ae379>] keyctl_session_to_parent+0xed/0x236
   [<ffffffff811af77e>] sys_keyctl+0xb4/0xb6
   [<ffffffff81001eab>] system_call_fastpath+0x16/0x1b

The code should take the RCU read lock to make sure the parents credentials
don't go away, even though it's holding a spinlock and has IRQ disabled.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  block: Range check cpu in blk_cpu_to_group
  scatterlist: prevent invalid free when alloc fails
  writeback: Fix lost wake-up shutting down writeback thread
  writeback: do not lose wakeup events when forking bdi threads
  cciss: fix reporting of max queue depth since init
  block: switch s390 tape_block and mg_disk to elevator_change()
  block: add function call to switch the IO scheduler from a driver
  fs/bio-integrity.c: return -ENOMEM on kmalloc failure
  bio-integrity.c: remove dependency on __GFP_NOFAIL
  BLOCK: fix bio.bi_rw handling
  block: put dev->kobj in blk_register_queue fail path
  cciss: handle allocation failure
  cfq-iosched: Documentation help for new tunables
  cfq-iosched: blktrace print per slice sector stats
  cfq-iosched: Implement tunable group_idle
  cfq-iosched: Do group share accounting in IOPS when slice_idle=0
  cfq-iosched: Do not idle if slice_idle=0
  cciss: disable doorbell reset on reset_devices
  blkio: Fix return code for mkdir calls

* 'at91-fixes-for-linus' of git://github.com/at91linux/linux-2.6-at91:
  AT91: at91sam9261ek: remove C99 comments but keep information
  AT91: at91sam9261ek board: remove warnings related to use of SPI or SD/MMC
  AT91: dm9000 initialization update
  AT91: SAM9G45 - add a separate clock entry for every single TC block
  AT91: clock: peripheral clocks can have other parent than mck
  AT91: change dma resource index

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: rawmidi: fix the get next midi device ioctl
  ALSA: hda - Fix wrong HP pin detection in snd_hda_parse_pin_def_config()
  ALSA: seq/oss - Fix double-free at error path of snd_seq_oss_open()
  ALSA: msnd-classic: Fix invalid cfg parameter
  ALSA: hda - Enable PC-beep for EeePC with ALC269 codec
  ALSA: hda - Add errata initverb sequence for CS42xx codecs
  ALSA: usb - Release capture substream URBs properly
  ALSA: virtuoso: fix setting of Xonar DS line-in/mic-in controls
  ALSA: virtuoso: work around missing reset in the Xonar DS Windows driver
  ALSA: hda - Add quirk for Lenovo T400s
  ALSA: usb-audio: fix detection of vendor-specific device protocol settings
  ALSA: usb-audio: Assume first control interface is for audio
  ALSA: hda - Add a new hp-laptop model for Conexant 5066, tested on HP G60

We don't know how to enable it safely, especially as outputs turn on and
off.  When disabling LP1 we also need to make sure LP2 and 3 are already
disabled.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29173
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29082Reported-by: Chris Lord <chris@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@kernel.org
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

The XFS_IOC_FSGETXATTR ioctl allows unprivileged users to read 12
bytes of uninitialized stack memory, because the fsxattr struct
declared on the stack in xfs_ioc_fsgetxattr() does not alter (or zero)
the 12-byte fsx_pad member before copying it back to the user.  This
patch takes care of it.
Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

The sd/mmc data structure is not used if SPI is selected. The configuration
of PIO on the board prevent from using both interfaces at the same time
(board dependent).
Remove the warnings at compilation time adding a preprocessor condition.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Add information in dm9000 mac/phy chip initialization:
- irq resource details
- platform data details
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

While testing CPU DLPAR, the following problem was discovered.
We were DLPAR removing the first CPU, which in this case was
logical CPUs 0-3. CPUs 0-2 were already marked offline and
we were in the process of offlining CPU 3. After marking
the CPU inactive and offline in cpu_disable, but before the
cpu was completely idle (cpu_die), we ended up in __make_request
on CPU 3. There we looked at the topology map to see which CPU
to complete the I/O on and found no CPUs in the cpu_sibling_map.
This resulted in the block layer setting the completion cpu
to be NR_CPUS, which then caused an oops when we tried to
complete the I/O.

Fix this by sanity checking the value we return from blk_cpu_to_group
to be a valid cpu value.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

Merge branch 'tip/perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/urgent

Merge branch 'perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/urgent

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata-sff: Reenable Port Multiplier after libata-sff remodeling.
  libata: skip EH autopsy and recovery during suspend
  ahci: AHCI and RAID mode SATA patch for Intel Patsburg DeviceIDs
  ata_piix: IDE Mode SATA patch for Intel Patsburg DeviceIDs
  libata,pata_via: revert ata_wait_idle() removal from ata_sff/via_tf_load()
  ahci: fix hang on failed softreset
  pata_artop: Fix device ID parity check

Be sure to avoid entering t_show() with FTRACE_ITER_HASH set without
having properly started the iterator to iterate the hash.  This case is
degenerate and, as discovered by Robert Swiecki, can cause t_hash_show()
to misuse a pointer.  This causes a NULL ptr deref with possible security
implications.  Tracked as CVE-2010-3079.

Cc: Robert Swiecki <swiecki@google.com>
Cc: Eugene Teo <eugene@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Keep track of the link on the which the current request is in progress.
It allows support of links behind port multiplier.

Not all libata-sff is PMP compliant. Code for native BMDMA controller
does not take in accound PMP.

Tested on Marvell 7042 and Sil7526.
Signed-off-by: Gwendal Grignou <gwendal@google.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

For some mysterious reason, certain hardware reacts badly to usual EH
actions while the system is going for suspend.  As the devices won't
be needed until the system is resumed, ask EH to skip usual autopsy
and recovery and proceed directly to suspend.
Signed-off-by: Tejun Heo <tj@kernel.org>
Tested-by: Stephan Diestelhorst <stephan.diestelhorst@amd.com>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

This patch adds the Intel Patsburg (PCH) SATA AHCI and RAID Controller
DeviceIDs.
Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

This patch adds the Intel Patsburg (PCH) IDE mode SATA Controller DeviceIDs.
Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Commit 978c0666 (libata: Remove excess delay in the tf_load path)
removed ata_wait_idle() from ata_sff_tf_load() and via_tf_load().
This caused obscure detection problems in sata_sil.

  https://bugzilla.kernel.org/show_bug.cgi?id=16606

The commit was pure performance optimization.  Revert it for now.
Reported-by: Dieter Plaetinck <dieter@plaetinck.be>
Reported-by: Jan Beulich <JBeulich@novell.com>
Bisected-by: gianluca <gianluca@sottospazio.it>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Commit 9eed1fb7 ("minix: replace inode uid,gid,mode init with helper")
broke directory creation on minix filesystems.

Fix it by passing the needed mode flag to inode init helper.
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Cc: Dmitry Monakhov <dmonakhov@openvz.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@kernel.org>		[2.6.35.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When under significant memory pressure, a process enters direct reclaim
and immediately afterwards tries to allocate a page.  If it fails and no
further progress is made, it's possible the system will go OOM.  However,
on systems with large amounts of memory, it's possible that a significant
number of pages are on per-cpu lists and inaccessible to the calling
process.  This leads to a process entering direct reclaim more often than
it should increasing the pressure on the system and compounding the
problem.

This patch notes that if direct reclaim is making progress but allocations
are still failing that the system is already under heavy pressure.  In
this case, it drains the per-cpu lists and tries the allocation a second
time before continuing.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: page allocator: calculate a better estimate of NR_FREE_PAGES when memory is low and kswapd is awake

Ordinarily watermark checks are based on the vmstat NR_FREE_PAGES as it is
cheaper than scanning a number of lists.  To avoid synchronization
overhead, counter deltas are maintained on a per-cpu basis and drained
both periodically and when the delta is above a threshold.  On large CPU
systems, the difference between the estimated and real value of
NR_FREE_PAGES can be very high.  If NR_FREE_PAGES is much higher than
number of real free page in buddy, the VM can allocate pages below min
watermark, at worst reducing the real number of pages to zero.  Even if
the OOM killer kills some victim for freeing memory, it may not free
memory if the exit path requires a new page resulting in livelock.

This patch introduces a zone_page_state_snapshot() function (courtesy of
Christoph) that takes a slightly more accurate view of an arbitrary vmstat
counter.  It is used to read NR_FREE_PAGES while kswapd is awake to avoid
the watermark being accidentally broken.  The estimate is not perfect and
may result in cache line bounces but is expected to be lighter than the
IPI calls necessary to continually drain the per-cpu counters while kswapd
is awake.
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When allocating a page, the system uses NR_FREE_PAGES counters to
determine if watermarks would remain intact after the allocation was made.
This check is made without interrupts disabled or the zone lock held and
so is race-prone by nature.  Unfortunately, when pages are being freed in
batch, the counters are updated before the pages are added on the list.
During this window, the counters are misleading as the pages do not exist
yet.  When under significant pressure on systems with large numbers of
CPUs, it's possible for processes to make progress even though they should
have been stalled.  This is particularly problematic if a number of the
processes are using GFP_ATOMIC as the min watermark can be accidentally
breached and in extreme cases, the system can livelock.

This patch updates the counters after the pages have been added to the
list.  This makes the allocator more cautious with respect to preserving
the watermarks and mitigates livelock possibilities.

[akpm@linux-foundation.org: avoid modifying incoming args]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

refresh_zone_stat_thresholds() calculates parameter based on the number of
online cpus.  It's called at cpu offlining but needs to be called at
onlining, too.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

O_NONBLOCK on parisc has a dual value:

#define O_NONBLOCK	000200004 /* HPUX has separate NDELAY & NONBLOCK */

It is caught by the O_* bits uniqueness check and leads to a parisc
compile error.  The fix would be to take O_NONBLOCK out.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Cc: Jamie Lokier <jamie@shareable.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Tests with recent firmware on Intel X25-M 80GB and OCZ Vertex 60GB SSDs
show a shift since I last tested in December: in part because of firmware
updates, in part because of the necessary move from barriers to awaiting
completion at the block layer.  While discard at swapon still shows as
slightly beneficial on both, discarding 1MB swap cluster when allocating
is now disadvanteous: adds 25% overhead on Intel, adds 230% on OCZ (YMMV).

Surrender: discard as presently implemented is more hindrance than help
for swap; but might prove useful on other devices, or with improvements.
So continue to do the discard at swapon, but make discard while swapping
conditional on a SWAP_FLAG_DISCARD to sys_swapon() (which has been using
only the lower 16 bits of int flags).

We can add a --discard or -d to swapon(8), and a "discard" to swap in
/etc/fstab: matching the mount option for btrfs, ext4, fat, gfs2, nilfs2.
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Nigel Cunningham <nigel@tuxonice.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <jaxboe@fusionio.com>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The swap code already uses synchronous discards, no need to add I/O
barriers.

This fixes the worst of the terrible slowdown in swap allocation for
hibernation, reported on 2.6.35 by Nigel Cunningham; but does not entirely
eliminate that regression.

[tj@kernel.org: superflous newlines removed]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Nigel Cunningham <nigel@tuxonice.net>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Jens Axboe <jaxboe@fusionio.com>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>