- 05 Aug, 2020 20 commits
-
-
Rik van Riel authored
commit cdea5459 upstream. The code in xlog_wait uses the spinlock to make adding the task to the wait queue, and setting the task state to UNINTERRUPTIBLE atomic with respect to the waker. Doing the wakeup after releasing the spinlock opens up the following race condition: Task 1 task 2 add task to wait queue wake up task set task state to UNINTERRUPTIBLE This issue was found through code inspection as a result of kworkers being observed stuck in UNINTERRUPTIBLE state with an empty wait queue. It is rare and largely unreproducable. Simply moving the spin_unlock to after the wake_up_all results in the waker not being able to see a task on the waitqueue before it has set its state to UNINTERRUPTIBLE. This bug dates back to the conversion of this code to generic waitqueue infrastructure from a counting semaphore back in 2008 which didn't place the wakeups consistently w.r.t. to the relevant spin locks. [dchinner: Also fix a similar issue in the shutdown path on xc_commit_wait. Update commit log with more details of the issue.] Fixes: d748c623 ("[XFS] Convert l_flushsema to a sv_t") Reported-by:
Chris Mason <clm@fb.com> Signed-off-by:
Rik van Riel <riel@surriel.com> Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Samuel Mendoza-Jonas <samjonas@amazon.com> Reviewed-by:
Frank van der Linden <fllinden@amazon.com> Reviewed-by:
Suraj Jitindar Singh <surajjs@amazon.com> Reviewed-by:
Benjamin Herrenschmidt <benh@amazon.com> Reviewed-by:
Anchal Agarwal <anchalag@amazon.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peilin Ye authored
commit bbc8a99e upstream. rds_notify_queue_get() is potentially copying uninitialized kernel stack memory to userspace since the compiler may leave a 4-byte hole at the end of `cmsg`. In 2016 we tried to fix this issue by doing `= { 0 };` on `cmsg`, which unfortunately does not always initialize that 4-byte hole. Fix it by using memset() instead. Cc: stable@vger.kernel.org Fixes: f037590f ("rds: fix a leak of kernel memory") Fixes: bdbe6fbc ("RDS: recv.c") Suggested-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Peilin Ye <yepeilin.cs@gmail.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Steve Cohen authored
commit 8490d6a7 upstream. A use-after-free in drm_gem_open_ioctl can happen if the GEM object handle is closed between the idr lookup and retrieving the size from said object since a local reference is not being held at that point. Hold the local reference while the object can still be accessed to fix this and plug the potential security hole. Signed-off-by:
Steve Cohen <cohens@codeaurora.org> Cc: stable@vger.kernel.org Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1595284250-31580-1-git-send-email-cohens@codeaurora.orgSigned-off-by:
-
Peilin Ye authored
commit 543e8669 upstream. Compiler leaves a 4-byte hole near the end of `dev_info`, causing amdgpu_info_ioctl() to copy uninitialized kernel stack memory to userspace when `size` is greater than 356. In 2015 we tried to fix this issue by doing `= {};` on `dev_info`, which unfortunately does not initialize that 4-byte hole. Fix it by using memset() instead. Cc: stable@vger.kernel.org Fixes: c193fa91 ("drm/amdgpu: information leak in amdgpu_info_ioctl()") Fixes: d38ceaf9 ("drm/amdgpu: add core driver (v4)") Suggested-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 87004abf upstream. This regressed some working configurations so revert it. Will fix this properly for 5.9 and backport then. This reverts commit 38e0c89a. Signed-off-by:
-
Will Deacon authored
commit eec13b42 upstream. Unprivileged memory accesses generated by the so-called "translated" instructions (e.g. LDRT) in kernel mode can cause user watchpoints to fire unexpectedly. In such cases, the hw_breakpoint logic will invoke the user overflow handler which will typically raise a SIGTRAP back to the current task. This is futile when returning back to the kernel because (a) the signal won't have been delivered and (b) userspace can't handle the thing anyway. Avoid invoking the user overflow handler for watchpoints triggered by kernel uaccess routines, and instead single-step over the faulting instruction as we would if no overflow handler had been installed. Cc: <stable@vger.kernel.org> Fixes: f81ef4a9 ("ARM: 6356/1: hw-breakpoint: add ARM backend for the hw-breakpoint framework") Reported-by:
Luis Machado <luis.machado@linaro.org> Tested-by:
Will Deacon <will@kernel.org> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Pi-Hsun Shih authored
commit 6989310f upstream. Use offsetof to calculate offset of a field to take advantage of compiler built-in version when possible, and avoid UBSAN warning when compiling with Clang: ================================================================== UBSAN: Undefined behaviour in net/wireless/wext-core.c:525:14 member access within null pointer of type 'struct iw_point' CPU: 3 PID: 165 Comm: kworker/u16:3 Tainted: G S W 4.19.23 #43 Workqueue: cfg80211 __cfg80211_scan_done [cfg80211] Call trace: dump_backtrace+0x0/0x194 show_stack+0x20/0x2c __dump_stack+0x20/0x28 dump_stack+0x70/0x94 ubsan_epilogue+0x14/0x44 ubsan_type_mismatch_common+0xf4/0xfc __ubsan_handle_type_mismatch_v1+0x34/0x54 wireless_send_event+0x3cc/0x470 ___cfg80211_scan_done+0x13c/0x220 [cfg80211] __cfg80211_scan_done+0x28/0x34 [cfg80211] process_one_work+0x170/0x35c worker_thread+0x254/0x380 kthread+0x13c/0x158 ret_from_fork+0x10/0x18 =================================================================== Signed-off-by:
Pi-Hsun Shih <pihsun@chromium.org> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20191204081307.138765-1-pihsun@chromium.orgSigned-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Wang Hai authored
commit 74d6a5d5 upstream. p9_read_work and p9_fd_cancelled may be called concurrently. In some cases, req->req_list may be deleted by both p9_read_work and p9_fd_cancelled. We can fix it by ignoring replies associated with a cancelled request and ignoring cancelled request if message has been received before lock. Link: http://lkml.kernel.org/r/20200612090833.36149-1-wanghai38@huawei.com Fixes: 60ff779c ("9p: client: remove unused code and any reference to "cancelled" function") Cc: <stable@vger.kernel.org> # v3.12+ Reported-by: syzbot+77a25acfa0382e06ab23@syzkaller.appspotmail.com Signed-off-by:
Wang Hai <wanghai38@huawei.com> Signed-off-by:
Dominique Martinet <asmadeus@codewreck.org> Signed-off-by:
-
Robert Hancock authored
commit b361663c upstream. Recently ASPM handling was changed to allow ASPM on PCIe-to-PCI/PCI-X bridges. Unfortunately the ASMedia ASM1083/1085 PCIe to PCI bridge device doesn't seem to function properly with ASPM enabled. On an Asus PRIME H270-PRO motherboard, it causes errors like these: pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID) pcieport 0000:00:1c.0: AER: device [8086:a292] error status/mask=00003000/00002000 pcieport 0000:00:1c.0: AER: [12] Timeout pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0 pcieport 0000:00:1c.0: AER: can't find device of ID00e0 In addition to flooding the kernel log, this also causes the machine to wake up immediately after suspend is initiated. The device advertises ASPM L0s and L1 support in the Link Capabilities register, but the ASMedia web page for ASM1083 [1] claims "No PCIe ASPM support". Windows 10 (build 2004) enables L0s, but it also logs correctable PCIe errors. Add a quirk to disable ASPM for this device. [1] https://www.asmedia.com.tw/eng/e_show_products.php?cate_index=169&item=114 [bhelgaas: commit log] Fixes: 66ff14e5 ("PCI/ASPM: Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208667 Link: https://lore.kernel.org/r/20200722021803.17958-1-hancockrwd@gmail.comSigned-off-by:
Robert Hancock <hancockrwd@gmail.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Filipe Manana authored
[ Upstream commit 9f7fec0b ] Some of the self tests create a test inode, setup some extents and then do calls to btrfs_get_extent() to test that the corresponding extent maps exist and are correct. However btrfs_get_extent(), since the 5.2 merge window, now errors out when it finds a regular or prealloc extent for an inode that does not correspond to a regular file (its ->i_mode is not S_IFREG). This causes the self tests to fail sometimes, specially when KASAN, slub_debug and page poisoning are enabled: $ modprobe btrfs modprobe: ERROR: could not insert 'btrfs': Invalid argument $ dmesg [ 9414.691648] Btrfs loaded, crc32c=crc32c-intel, debug=on, assert=on, integrity-checker=on, ref-verify=on [ 9414.692655] BTRFS: selftest: sectorsize: 4096 nodesize: 4096 [ 9414.692658] BTRFS: selftest: running btrfs free space cache tests [ 9414.692918] BTRFS: selftest: running extent only tests [ 9414.693061] BTRFS: selftest: running bitmap only tests [ 9414.693366] BTRFS: selftest: running bitmap and extent tests [ 9414.696455] BTRFS: selftest: running space stealing from bitmap to extent tests [ 9414.697131] BTRFS: selftest: running extent buffer operation tests [ 9414.697133] BTRFS: selftest: running btrfs_split_item tests [ 9414.697564] BTRFS: selftest: running extent I/O tests [ 9414.697583] BTRFS: selftest: running find delalloc tests [ 9415.081125] BTRFS: selftest: running find_first_clear_extent_bit test [ 9415.081278] BTRFS: selftest: running extent buffer bitmap tests [ 9415.124192] BTRFS: selftest: running inode tests [ 9415.124195] BTRFS: selftest: running btrfs_get_extent tests [ 9415.127909] BTRFS: selftest: running hole first btrfs_get_extent test [ 9415.128343] BTRFS critical (device (efault)): regular/prealloc extent found for non-regular inode 256 [ 9415.131428] BTRFS: selftest: fs/btrfs/tests/inode-tests.c:904 expected a real extent, got 0 This happens because the test inodes are created without ever initializing the i_mode field of the inode, and neither VFS's new_inode() nor the btrfs callback btrfs_alloc_inode() initialize the i_mode. Initialization of the i_mode is done through the various callbacks used by the VFS to create new inodes (regular files, directories, symlinks, tmpfiles, etc), which all call btrfs_new_inode() which in turn calls inode_init_owner(), which sets the inode's i_mode. Since the tests only uses new_inode() to create the test inodes, the i_mode was never initialized. This always happens on a VM I used with kasan, slub_debug and many other debug facilities enabled. It also happened to someone who reported this on bugzilla (on a 5.3-rc). Fix this by setting i_mode to S_IFREG at btrfs_new_test_inode(). Fixes: 6bf9e4bd ("btrfs: inode: Verify inode mode to avoid NULL pointer dereference") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204397Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Xin Long authored
[ Upstream commit 1033990a ] Now when sending packets, sk_mem_charge() and sk_mem_uncharge() have been used to set sk_forward_alloc. We just need to call sk_wmem_schedule() to check if the allocated should be raised, and call sk_mem_reclaim() to check if the allocated should be reduced when it's under memory pressure. If sk_wmem_schedule() returns false, which means no memory is allowed to allocate, it will block and wait for memory to become available. Note different from tcp, sctp wait_for_buf happens before allocating any skb, so memory accounting check is done with the whole msg_len before it too. Reported-by:
Matteo Croce <mcroce@redhat.com> Tested-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Qu Wenruo authored
[ Upstream commit 6bf9e4bd ] [BUG] When accessing a file on a crafted image, btrfs can crash in block layer: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 PGD 136501067 P4D 136501067 PUD 124519067 PMD 0 CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.0.0-rc8-default #252 RIP: 0010:end_bio_extent_readpage+0x144/0x700 Call Trace: <IRQ> blk_update_request+0x8f/0x350 blk_mq_end_request+0x1a/0x120 blk_done_softirq+0x99/0xc0 __do_softirq+0xc7/0x467 irq_exit+0xd1/0xe0 call_function_single_interrupt+0xf/0x20 </IRQ> RIP: 0010:default_idle+0x1e/0x170 [CAUSE] The crafted image has a tricky corruption, the INODE_ITEM has a different type against its parent dir: item 20 key (268 INODE_ITEM 0) itemoff 2808 itemsize 160 generation 13 transid 13 size 1048576 nbytes 1048576 block group 0 mode 121644 links 1 uid 0 gid 0 rdev 0 sequence 9 flags 0x0(none) This mode number 0120000 means it's a symlink. But the dir item think it's still a regular file: item 8 key (264 DIR_INDEX 5) itemoff 3707 itemsize 32 location key (268 INODE_ITEM 0) type FILE transid 13 data_len 0 name_len 2 name: f4 item 40 key (264 DIR_ITEM 51821248) itemoff 1573 itemsize 32 location key (268 INODE_ITEM 0) type FILE transid 13 data_len 0 name_len 2 name: f4 For symlink, we don't set BTRFS_I(inode)->io_tree.ops and leave it empty, as symlink is only designed to have inlined extent, all handled by tree block read. Thus no need to trigger btrfs_submit_bio_hook() for inline file extent. However end_bio_extent_readpage() expects tree->ops populated, as it's reading regular data extent. This causes NULL pointer dereference. [FIX] This patch fixes the problem in two ways: - Verify inode mode against its dir item when looking up inode So in btrfs_lookup_dentry() if we find inode mode mismatch with dir item, we error out so that corrupted inode will not be accessed. - Verify inode mode when getting extent mapping Only regular file should have regular or preallocated extent. If we found regular/preallocated file extent for symlink or the rest, we error out before submitting the read bio. With this fix that crafted image can be rejected gracefully: BTRFS critical (device loop0): inode mode mismatch with dir: inode mode=0121644 btrfs type=7 dir type=1 Reported-by:
Yoon Jungyeon <jungyeon@gatech.edu> Link: https://bugzilla.kernel.org/show_bug.cgi?id=202763Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
-
Navid Emamdoost authored
[ Upstream commit 104c3071 ] In dcn*_create_resource_pool the allocated memory should be released if construct pool fails. Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by:
-
Navid Emamdoost authored
[ Upstream commit 728c1e2a ] In ath9k_wmi_cmd, the allocated network buffer needs to be released if timeout happens. Otherwise memory will be leaked. Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Navid Emamdoost authored
[ Upstream commit 853acf7c ] In htc_config_pipe_credits, htc_setup_complete, and htc_connect_service if time out happens, the allocated buffer needs to be released. Otherwise there will be memory leak. Signed-off-by:
-
Navid Emamdoost authored
[ Upstream commit 96c5c6e6 ] In predicate_parse, there is an error path that is not going to out_free instead it returns directly which leads to a memory leak. Link: http://lkml.kernel.org/r/20190920225800.3870-1-navid.emamdoost@gmail.comSigned-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Navid Emamdoost authored
[ Upstream commit 57be09c6 ] In acp_hw_init there are some allocations that needs to be released in case of failure: 1- adev->acp.acp_genpd should be released if any allocation attemp for adev->acp.acp_cell, adev->acp.acp_res or i2s_pdata fails. 2- all of those allocations should be released if mfd_add_hotplug_devices or pm_genpd_add_device fail. 3- Release is needed in case of time out values expire. Reviewed-by:
-
Sasha Levin authored
[ Upstream commit 9c0530e8 ] In adis_update_scan_mode_burst, if adis->buffer allocation fails release the adis->xfer. Signed-off-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Navid Emamdoost authored
[ Upstream commit a7b2df76 ] In cx23888_ir_probe if kfifo_alloc fails the allocated memory for state should be released. Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Navid Emamdoost authored
[ Upstream commit 128c6642 ] Release all allocated memory if sha type is invalid: In ccp_run_sha_cmd, if the type of sha is invalid, the allocated hmac_buf should be released. v2: fix the goto. Signed-off-by:
Gary R Hook <gary.hook@amd.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
- 31 Jul, 2020 18 commits
-
-
Greg Kroah-Hartman authored
Signed-off-by: -
Peng Fan authored
commit 74edd08a upstream. When executing the following command, we met kernel dump. dmesg -c > /dev/null; cd /sys; for i in `ls /sys/kernel/debug/regmap/* -d`; do echo "Checking regmap in $i"; cat $i/registers; done && grep -ri "0x02d0" *; It is because the count value is too big, and kmalloc fails. So add an upper bound check to allow max size `PAGE_SIZE << (MAX_ORDER - 1)`. Signed-off-by:
Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/1584064687-12964-1-git-send-email-peng.fan@nxp.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Weilong Chen authored
[ Upstream commit cebb6975 ] When vlan_newlink call register_vlan_dev fails, it might return error with dev->reg_state = NETREG_UNREGISTERED. The rtnl_newlink should free the memory. But currently rtnl_newlink only free the memory which state is NETREG_UNINITIALIZED. BUG: memory leak unreferenced object 0xffff8881051de000 (size 4096): comm "syz-executor139", pid 560, jiffies 4294745346 (age 32.445s) hex dump (first 32 bytes): 76 6c 61 6e 32 00 00 00 00 00 00 00 00 00 00 00 vlan2........... 00 45 28 03 81 88 ff ff 00 00 00 00 00 00 00 00 .E(............. backtrace: [<0000000047527e31>] kmalloc_node include/linux/slab.h:578 [inline] [<0000000047527e31>] kvmalloc_node+0x33/0xd0 mm/util.c:574 [<000000002b59e3bc>] kvmalloc include/linux/mm.h:753 [inline] [<000000002b59e3bc>] kvzalloc include/linux/mm.h:761 [inline] [<000000002b59e3bc>] alloc_netdev_mqs+0x83/0xd90 net/core/dev.c:9929 [<000000006076752a>] rtnl_create_link+0x2c0/0xa20 net/core/rtnetlink.c:3067 [<00000000572b3be5>] __rtnl_newlink+0xc9c/0x1330 net/core/rtnetlink.c:3329 [<00000000e84ea553>] rtnl_newlink+0x66/0x90 net/core/rtnetlink.c:3397 [<0000000052c7c0a9>] rtnetlink_rcv_msg+0x540/0x990 net/core/rtnetlink.c:5460 [<000000004b5cb379>] netlink_rcv_skb+0x12b/0x3a0 net/netlink/af_netlink.c:2469 [<00000000c71c20d3>] netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] [<00000000c71c20d3>] netlink_unicast+0x4c6/0x690 net/netlink/af_netlink.c:1329 [<00000000cca72fa9>] netlink_sendmsg+0x735/0xcc0 net/netlink/af_netlink.c:1918 [<000000009221ebf7>] sock_sendmsg_nosec net/socket.c:652 [inline] [<000000009221ebf7>] sock_sendmsg+0x109/0x140 net/socket.c:672 [<000000001c30ffe4>] ____sys_sendmsg+0x5f5/0x780 net/socket.c:2352 [<00000000b71ca6f3>] ___sys_sendmsg+0x11d/0x1a0 net/socket.c:2406 [<0000000007297384>] __sys_sendmsg+0xeb/0x1b0 net/socket.c:2439 [<000000000eb29b11>] do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359 [<000000006839b4d0>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: cb626bf5 ("net-sysfs: Fix reference count leak") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Weilong Chen <chenweilong@huawei.com> Signed-off-by:
-
Kuniyuki Iwashima authored
[ Upstream commit efc6b6f6 ] Currently, SO_REUSEPORT does not work well if connected sockets are in a UDP reuseport group. Then reuseport_has_conns() returns true and the result of reuseport_select_sock() is discarded. Also, unconnected sockets have the same score, hence only does the first unconnected socket in udp_hslot always receive all packets sent to unconnected sockets. So, the result of reuseport_select_sock() should be used for load balancing. The noteworthy point is that the unconnected sockets placed after connected sockets in sock_reuseport.socks will receive more packets than others because of the algorithm in reuseport_select_sock(). index | connected | reciprocal_scale | result --------------------------------------------- 0 | no | 20% | 40% 1 | no | 20% | 20% 2 | yes | 20% | 0% 3 | no | 20% | 40% 4 | yes | 20% | 0% If most of the sockets are connected, this can be a problem, but it still works better than now. Fixes: acdcecc6 ("udp: correct reuseport selection with connected sockets") CC: Willem de Bruijn <willemb@google.com> Reviewed-by:
Kuniyuki Iwashima <kuniyu@amazon.co.jp> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Kuniyuki Iwashima authored
[ Upstream commit f2b2c55e ] If an unconnected socket in a UDP reuseport group connect()s, has_conns is set to 1. Then, when a packet is received, udp[46]_lib_lookup2() scans all sockets in udp_hslot looking for the connected socket with the highest score. However, when the number of sockets bound to the port exceeds max_socks, reuseport_grow() resets has_conns to 0. It can cause udp[46]_lib_lookup2() to return without scanning all sockets, resulting in that packets sent to connected sockets may be distributed to unconnected sockets. Therefore, reuseport_grow() should copy has_conns. Fixes: acdcecc6 ("udp: correct reuseport selection with connected sockets") CC: Willem de Bruijn <willemb@google.com> Reviewed-by:
-
Xin Long authored
[ Upstream commit 3ecdda3e ] When adding a stream with stream reconf, the new stream firstly is in CLOSED state but new out chunks can still be enqueued. Then once gets the confirmation from the peer, the state will change to OPEN. However, if the peer denies, it needs to roll back the stream. But when doing that, it only sets the stream outcnt back, and the chunks already in the new stream don't get purged. It caused these chunks can still be dequeued in sctp_outq_dequeue_data(). As its stream is still in CLOSE, the chunk will be enqueued to the head again by sctp_outq_head_data(). This chunk will never be sent out, and the chunks after it can never be dequeued. The assoc will be 'hung' in a dead loop of sending this chunk. To fix it, this patch is to purge these chunks already in the new stream by calling sctp_stream_shrink_out() when failing to do the addstream reconf. Fixes: 11ae76e6 ("sctp: implement receiver-side procedures for the Reconf Response Parameter") Reported-by:
Ying Xu <yinxu@redhat.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit 8f13399d ] It's not necessary to go list_for_each for outq->out_chunk_list when new outcnt >= old outcnt, as no chunk with higher sid than new (outcnt - 1) exists in the outqueue. While at it, also move the list_for_each code in a new function sctp_stream_shrink_out(), which will be used in the next patch. Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 17ad73e9 ] We recently added some bounds checking in ax25_connect() and ax25_sendmsg() and we so we removed the AX25_MAX_DIGIS checks because they were no longer required. Unfortunately, I believe they are required to prevent integer overflows so I have added them back. Fixes: 8885bb06 ("AX.25: Prevent out-of-bounds read in ax25_sendmsg()") Fixes: 2f2a7ffa ("AX.25: Fix out-of-bounds read in ax25_connect()") Signed-off-by:
-
Yuchung Cheng authored
[ Upstream commit 76be93fc ] Previously TLP may send multiple probes of new data in one flight. This happens when the sender is cwnd limited. After the initial TLP containing new data is sent, the sender receives another ACK that acks partial inflight. It may re-arm another TLP timer to send more, if no further ACK returns before the next TLP timeout (PTO) expires. The sender may send in theory a large amount of TLP until send queue is depleted. This only happens if the sender sees such irregular uncommon ACK pattern. But it is generally undesirable behavior during congestion especially. The original TLP design restrict only one TLP probe per inflight as published in "Reducing Web Latency: the Virtue of Gentle Aggression", SIGCOMM 2013. This patch changes TLP to send at most one probe per inflight. Note that if the sender is app-limited, TLP retransmits old data and did not have this issue. Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
David Howells authored
[ Upstream commit 639f181f ] rxrpc_sendmsg() returns EPIPE if there's an outstanding error, such as if rxrpc_recvmsg() indicating ENODATA if there's nothing for it to read. Change rxrpc_recvmsg() to return EAGAIN instead if there's nothing to read as this particular error doesn't get stored in ->sk_err by the networking core. Also change rxrpc_sendmsg() so that it doesn't fail with delayed receive errors (there's no way for it to report which call, if any, the error was caused by). Fixes: 17926a79 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Cong Wang authored
[ Upstream commit af9f691f ] We have to detach sock from socket in qrtr_release(), otherwise skb->sk may still reference to this socket when the skb is released in tun->queue, particularly sk->sk_wq still points to &sock->wq, which leads to a UAF. Reported-and-tested-by: syzbot+6720d64f31c081c2f708@syzkaller.appspotmail.com Fixes: 28fb4e59 ("net: qrtr: Expose tunneling endpoint to user space") Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by:
-
Miaohe Lin authored
[ Upstream commit b0a42277 ] We can't use IS_UDPLITE to replace udp_sk->pcflag when UDPLITE_RECV_CC is checked. Fixes: b2bf1e26 ("[UDP]: Clean up for IS_UDPLITE macro") Signed-off-by:
Miaohe Lin <linmiaohe@huawei.com> Signed-off-by:
-
Xiongfeng Wang authored
[ Upstream commit 9bb5fbea ] When I cat 'tx_timeout' by sysfs, it displays as follows. It's better to add a newline for easy reading. root@syzkaller:~# cat /sys/devices/virtual/net/lo/queues/tx-0/tx_timeout 0root@syzkaller:~# Signed-off-by:
Xiongfeng Wang <wangxiongfeng2@huawei.com> Signed-off-by:
-
Wei Yongjun authored
[ Upstream commit 46ef5b89 ] KASAN report null-ptr-deref error when register_netdev() failed: KASAN: null-ptr-deref in range [0x00000000000003c0-0x00000000000003c7] CPU: 2 PID: 422 Comm: ip Not tainted 5.8.0-rc4+ #12 Call Trace: ip6gre_init_net+0x4ab/0x580 ? ip6gre_tunnel_uninit+0x3f0/0x3f0 ops_init+0xa8/0x3c0 setup_net+0x2de/0x7e0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? ops_init+0x3c0/0x3c0 ? kasan_unpoison_shadow+0x33/0x40 ? __kasan_kmalloc.constprop.0+0xc2/0xd0 copy_net_ns+0x27d/0x530 create_new_namespaces+0x382/0xa30 unshare_nsproxy_namespaces+0xa1/0x1d0 ksys_unshare+0x39c/0x780 ? walk_process_tree+0x2a0/0x2a0 ? trace_hardirqs_on+0x4a/0x1b0 ? _raw_spin_unlock_irq+0x1f/0x30 ? syscall_trace_enter+0x1a7/0x330 ? do_syscall_64+0x1c/0xa0 __x64_sys_unshare+0x2d/0x40 do_syscall_64+0x56/0xa0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ip6gre_tunnel_uninit() has set 'ign->fb_tunnel_dev' to NULL, later access to ign->fb_tunnel_dev cause null-ptr-deref. Fix it by saving 'ign->fb_tunnel_dev' to local variable ndev. Fixes: dafabb65 ("ip6_gre: fix use-after-free in ip6gre_tunnel_lookup()") Reported-by:
Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by:
-
Xie He authored
[ Upstream commit 8fdcabea ] This driver is not working because of problems of its receiving code. This patch fixes it to make it work. When the driver receives an LAPB frame, it should first pass the frame to the LAPB module to process. After processing, the LAPB module passes the data (the packet) back to the driver, the driver should then add a one-byte pseudo header and pass the data to upper layers. The changes to the "x25_asy_bump" function and the "x25_asy_data_indication" function are to correctly implement this procedure. Also, the "x25_asy_unesc" function ignores any frame that is shorter than 3 bytes. However the shortest frames are 2-byte long. So we need to change it to allow 2-byte frames to pass. Cc: Eric Dumazet <edumazet@google.com> Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by:
Xie He <xie.he.0141@gmail.com> Reviewed-by:
Martin Schiller <ms@dev.tdt.de> Signed-off-by:
-
Subash Abhinov Kasiviswanathan authored
[ Upstream commit 7df5cb75 ] IRQs are disabled when freeing skbs in input queue. Use the IRQ safe variant to free skbs here. Fixes: 145dd5f9 ("net: flush the softnet backlog in process context") Signed-off-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by:
-
Peilin Ye authored
[ Upstream commit 8885bb06 ] Checks on `addr_len` and `usax->sax25_ndigis` are insufficient. ax25_sendmsg() can go out of bounds when `usax->sax25_ndigis` equals to 7 or 8. Fix it. It is safe to remove `usax->sax25_ndigis > AX25_MAX_DIGIS`, since `addr_len` is guaranteed to be less than or equal to `sizeof(struct full_sockaddr_ax25)` Signed-off-by:
-
Peilin Ye authored
[ Upstream commit 2f2a7ffa ] Checks on `addr_len` and `fsa->fsa_ax25.sax25_ndigis` are insufficient. ax25_connect() can go out of bounds when `fsa->fsa_ax25.sax25_ndigis` equals to 7 or 8. Fix it. This issue has been reported as a KMSAN uninit-value bug, because in such a case, ax25_connect() reaches into the uninitialized portion of the `struct sockaddr_storage` statically allocated in __sys_connect(). It is safe to remove `fsa->fsa_ax25.sax25_ndigis > AX25_MAX_DIGIS` because `addr_len` is guaranteed to be less than or equal to `sizeof(struct full_sockaddr_ax25)`. Reported-by: syzbot+c82752228ed975b0a623@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=55ef9d629f3b3d7d70b69558015b63b48d01af66Signed-off-by:
-
- 29 Jul, 2020 2 commits
-
-
Greg Kroah-Hartman authored
Tested-by:
Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
-
Mark O'Donovan authored
commit 92f53e2f upstream. This fix allows ath9k_htc modules to connect to WLAN once again. Fixes: 2bbcaaee ("ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb") Link: https://bugzilla.kernel.org/show_bug.cgi?id=208251Signed-off-by:
Mark O'Donovan <shiftee@posteo.net> Reported-by:
Roman Mamedov <rm@romanrm.net> Tested-by:
Viktor Jägersküpper <viktor_jaegerskuepper@freenet.de> Signed-off-by:
-
