- 02 Jul, 2022 20 commits
-
-
Arun Ramadoss authored
This patch add the support for port_max_mtu, port_change_mtu and port_fast_age dsa functionality. Signed-off-by:
Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arun Ramadoss authored
This patch register mdio-bus for the lan937x series switch. mdio read and write uses the vphy for accessing the phy register. Signed-off-by:
-
Arun Ramadoss authored
This patch add support for the writing and reading of the phy registers. LAN937x uses the Vphy indirect addressing method for accessing the phys. Signed-off-by:
-
Arun Ramadoss authored
This patch update the ksz_get_tag_protocol to return LAN937x specific tag if the chip id matches one of LAN937x series switch Signed-off-by:
-
Arun Ramadoss authored
Basic DSA driver support for lan937x and the device will be configured through SPI interface. It adds the lan937x_dev_ops in ksz_common.c file and tries to reuse the functionality of ksz9477 series switch. drivers/net/dsa/microchip/ path is already part of MAINTAINERS & the new files come under this path. Hence no update needed to the MAINTAINERS Signed-off-by:
-
Arun Ramadoss authored
The ksz9477 and lan937x has few difference in the static and reserved table register 0x041C. For the ksz9477 if the bit 0 is 1 - read operation and 0 - write operation. But for lan937x bit 1:0 used for selecting the read/write operation, 01 - write and 10 - read. To use ksz9477 mdb add/del and enable_stp_addr for the lan937x, masks & shifts are introduced for ksz9477 & lan937x in ksz_common.c. Then updated the function with masks & shifts based on the switch instead of hard coding it. Signed-off-by:
-
Prasanna Vengateshan authored
The Microchip LAN937X switches have a tagging protocol which is very similar to KSZ tagging. So that the implementation is added to tag_ksz.c and reused common APIs Signed-off-by:
Prasanna Vengateshan <prasanna.vengateshan@microchip.com> Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Prasanna Vengateshan authored
Documentation in .yaml format and updates to the MAINTAINERS Also 'make dt_binding_check' is passed. RGMII internal delay values for the mac is retrieved from rx-internal-delay-ps & tx-internal-delay-ps as per the feedback from v3 patch series. https://lore.kernel.org/netdev/20210802121550.gqgbipqdvp5x76ii@skbuf/ It supports only the delay value of 0ns and 2ns. Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
-
Prasanna Vengateshan authored
*-internal-delay-ps properties would be applicable only for RGMII interface modes. It is changed as per the request. Ran dt_binding_check to confirm nothing is broken. link: https://lore.kernel.org/netdev/d8e5f6a8-a7e1-dabd-f4b4-ea8ea21d0a1d@gmail.com/Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
-
David S. Miller authored
Divya Koppera says: ==================== net: LED feature for LAN8814 PHY Enable LED mode configuration for LAN8814 PHY v2 -> v3: - Fixed compilation issues v1 -> v2: - Updated dt-bindings for micrel,led-mode in LAN8814 PHY ==================== Signed-off-by: -
Divya Koppera authored
LED support for extended mode where LED 1: Enhanced Mode 5 (10M/1000M/Activity) LED 2: Enhanced Mode 4 (100M/1000M/Activity) By default it supports KSZ9031 LED mode Signed-off-by:
Divya Koppera <Divya.Koppera@microchip.com> Signed-off-by:
-
Divya Koppera authored
Enable led-mode configuration for LAN8814 phy Signed-off-by:
-
Eric Dumazet authored
Most drivers use "skb_transport_offset(skb) + tcp_hdrlen(skb)" to compute headers length for a TCP packet, but others use more convoluted (but equivalent) ways. Add skb_tcp_all_headers() and skb_inner_tcp_all_headers() helpers to harmonize this a bit. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Jilin Yuan authored
Delete the redundant word 'a'. Signed-off-by:
Jilin Yuan <yuanjilin@cdjrlc.com> Link: https://lore.kernel.org/r/20220630123924.7531-1-yuanjilin@cdjrlc.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jilin Yuan authored
Delete the redundant word 'are'. Signed-off-by:
-
Jilin Yuan authored
Delete the redundant word 'all'. Signed-off-by:
-
Jilin Yuan authored
Delete the redundant word 'the'. Delete the redundant word 'is'. Delete the redundant word 'start'. Delete the redundant word 'checking'. Signed-off-by:
-
Oliver Neukum authored
The driver has long since be converted to dynamic debugging. The internal compile options for more debugging can simply be deleted. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20220630110741.21314-1-oneukum@suse.comSigned-off-by:
-
Clément Léger authored
As stated by Russel King, miic_config() can be called as a result of ethtool setting the configuration while the link is already up. Since the speed is also set in this function, it could potentially modify the current speed that is set. This will only happen if there is no PHY present and we aren't using fixed-link mode. Handle that by storing the current interface mode in the miic_port structure and update the speed only if the interface mode is going to be changed. Signed-off-by:
Clément Léger <clement.leger@bootlin.com> Link: https://lore.kernel.org/r/20220629122003.189397-1-clement.leger@bootlin.comSigned-off-by:
-
Shijith Thotton authored
Made size of operands same in bitwise operations. The patch fixes the klocwork issue, operands in a bitwise operation have different size at line 375 and 483. Signed-off-by:
Shijith Thotton <sthotton@marvell.com> Link: https://lore.kernel.org/r/f4fba33fe4f89b420b4da11d51255e7cc6ea1dbf.1656586269.git.sthotton@marvell.comSigned-off-by:
-
- 01 Jul, 2022 20 commits
-
-
Li kunyu authored
Remove the repeated ';' from code. Signed-off-by:
Li kunyu <kunyu@nfschina.com> Signed-off-by:
-
Bin Chen authored
Support VF rate limiting with NFDK by adding ndo_set_vf_rate to the NFDK ops structure. NFDK is used to communicate via PCIE to NFP-3800 based NICs while NFD3 is used for other NICs supported by the NFP driver. The VF rate limit feature is already supported by the driver for NFD3. Signed-off-by:
Bin Chen <bin.chen@corigine.com> Reviewed-by:
Baowen Zheng <baowen.zheng@corigine.com> Reviewed-by:
Louis Peens <louis.peens@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
Oliver Neukum authored
Either you use BIT(x) or 1 << x in the same expression. Mixing them is ridiculous. Go to BIT() Signed-off-by:
-
Li kunyu authored
Remove the repeated ',' from string Signed-off-by:
-
Alaa Mohamed authored
parsing and usage of -t got missed in the previous patch. this patch fixes it Fixes: 816cda9a ("selftests: net: fib_rule_tests: add support to select a test to run") Signed-off-by:
Alaa Mohamed <eng.alaamohamedsoliman.am@gmail.com> Signed-off-by:
-
David S. Miller authored
Mat Martineau says: ==================== mptcp: Updates for mem scheduling and SK_RECLAIM In the "net: reduce tcp_memory_allocated inflation" series (merge commit e10b02ee), Eric Dumazet noted that "Removal of SK_RECLAIM_CHUNK and SK_RECLAIM_THRESHOLD is left to MPTCP maintainers as a follow up." Patches 1-3 align MPTCP with the above TCP changes to forward memory allocation, reclaim, and memory scheduling. Patch 4 removes the SK_RECLAIM_* macros as Eric requested. ==================== Signed-off-by:
-
Paolo Abeni authored
There are no more users for the mentioned macros, just drop them. Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Paolo Abeni authored
Similar to commit 7c80b038 ("net: fix sk_wmem_schedule() and sk_rmem_schedule() errors"), let the MPTCP receive path schedule exactly the required amount of memory. Signed-off-by:
-
Paolo Abeni authored
After commit 4890b686 ("net: keep sk->sk_forward_alloc as small as possible"), the MPTCP protocol is the last SK_RECLAIM_CHUNK and SK_RECLAIM_THRESHOLD users. Update the MPTCP reclaim schema to match the core/TCP one and drop the mentioned macros. This additionally clean the MPTCP code a bit. Signed-off-by:
-
Paolo Abeni authored
The memory accounting is broken in such exceptional code path, and after commit 4890b686 ("net: keep sk->sk_forward_alloc as small as possible") we can't find much help there. Drop the broken code. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/nexDavid S. Miller authored
t-queue Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2022-06-30 This series contains updates to ice driver only. Martyna adds support for VLAN related TC switchdev filters and reworks dummy packet implementation of VLANs to enable dynamic header insertion to allow for more rule types. Lu Wei utilizes eth_broadcast_addr() helper over an open coded version. Ziyang Xuan removes unneeded NULL checks. ==================== Signed-off-by: -
Jilin Yuan authored
Delete the redundant word 'frame'. Signed-off-by:
-
Jilin Yuan authored
Delete the redundant word 'the'. Delete the redundant word 'a'. Delete the redundant word 'frame'. Delete the redundant word 'is'. Delete the redundant word 'not'. Signed-off-by:
-
Jilin Yuan authored
Delete the redundant word 'in'. Signed-off-by:
-
Jilin Yuan authored
Delete the redundant word 'action'. Delete the redundant word 'refer'. Delete the redundant word 'for'. Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
-
Jilin Yuan authored
Delete the redundant word 'a'. Signed-off-by:
-
Jilin Yuan authored
Delete the redundant word 'so'. Signed-off-by:
-
Jakub Kicinski authored
Vladimir Oltean says: ==================== Prevent permanently closed tc-taprio gates from blocking a Felix DSA switch port Richie Pearn reports that if we install a tc-taprio schedule on a Felix switch port, and that schedule has at least one gate that never opens (for example TC0 below): tc qdisc add dev swp1 root taprio num_tc 8 map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ base-time 0 sched-entry S fe 1000000 flags 0x2 then packets classified to the permanently closed traffic class will not be dequeued by the egress port. They will just remain in the queue system, to consume resources. Frame aging does not trigger either, because in order for that to happen, the packets need to be eligible for egress scheduling in the first place, which they aren't. If that port is allowed to consume the entire shared buffer of the switch (as we configure things by default using devlink-sb), then eventually, by sending enough packets, the entire switch will hang. If we think enough about the problem, we realize that this is only a special case of a more general issue, and can also be reproduced with gates that aren't permanently closed, but are not large enough to send an entire frame. In that sense, a permanently closed gate is simply a case where all frames are oversized. The ENETC has logic to reject transmitted packets that would overrun the time window - see commit 285e8ded ("net: enetc: count the tc-taprio window drops"). The Felix switch has no such thing on a per-packet basis, but it has a register replicated per {egress port, TC} which essentially limits the max MTU. A packet which exceeds the per-port-TC MTU is immediately discarded and therefore will not hang the port anymore (albeit, sadly, this only bumps a generic drop hardware counter and we cannot really infer the reason such as to offer a dedicated counter for these events). This patch set calculates the max MTU per {port, TC} when the tc-taprio config, or link speed, or port-global MTU values change. This solves the larger "gate too small for packet" problem, but also the original issue with the gate permanently closed that was reported by Richie. ==================== Link: https://lore.kernel.org/r/20220628145238.3247853-1-vladimir.oltean@nxp.comSigned-off-by:
-
Vladimir Oltean authored
Time-sensitive networking code needs to work with PTP times expressed in nanoseconds, and with packet transmission times expressed in picoseconds, since those would be fractional at higher than gigabit speed when expressed in nanoseconds. Convert the existing uses in tc-taprio and the ocelot/felix DSA driver to a PSEC_PER_NSEC macro. This macro is placed in include/linux/time64.h as opposed to its relatives (PSEC_PER_SEC etc) from include/vdso/time64.h because the vDSO library does not (yet) need/use it. Cc: Andy Lutomirski <luto@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> # for the vDSO parts Signed-off-by:
-
Vladimir Oltean authored
Currently, sending a packet into a time gate too small for it (or always closed) causes the queue system to hold the frame forever. Even worse, this frame isn't subject to aging either, because for that to happen, it needs to be scheduled for transmission in the first place. But the frame will consume buffer memory and frame references while it is forever held in the queue system. Before commit a4ae997a ("net: mscc: ocelot: initialize watermarks to sane defaults"), this behavior was somewhat subtle, as the switch had a more intricately tuned default watermark configuration out of reset, which did not allow any single port and tc to consume the entire switch buffer space. Nonetheless, the held frames are still there, and they reduce the total backplane capacity of the switch. However, after the aforementioned commit, the behavior can be very clearly seen, since we deliberately allow each {port, tc} to consume the entire shared buffer of the switch minus the reservations (and we disable all reservations by default). That is to say, we allow a permanently closed tc-taprio gate to hang the entire switch. A careful inspection of the documentation shows that the QSYS:Q_MAX_SDU per-port-tc registers serve 2 purposes: one is for guard band calculation (when zero, this falls back to QSYS:PORT_MAX_SDU), and the other is to enable oversized frame dropping (when non-zero). Currently the QSYS:Q_MAX_SDU registers are all zero, so oversized frame dropping is disabled. The goal of the change is to enable it seamlessly. For that, we need to hook into the MTU change, tc-taprio change, and port link speed change procedures, since we depend on these variables. Frames are not dropped on egress due to a queue system oversize condition, instead that egress port is simply excluded from the mask of valid destination ports for the packet. If there are no destination ports at all, the ingress counter that increments is the generic "drop_tail" in ethtool -S. The issue exists in various forms since the tc-taprio offload was introduced. Fixes: de143c0e ("net: dsa: felix: Configure Time-Aware Scheduler via taprio offload") Reported-by:
Richie Pearn <richard.pearn@nxp.com> Signed-off-by:
-
