- 05 Jul, 2010 7 commits
-
-
Tony Lindgren authored
Allow compiling in new mux code on all mach-omap2 systems Signed-off-by:Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
Only POP and SIP are known to exist for 2420, 2430 seems to only have SIP package available. Signed-off-by: -
Tony Lindgren authored
Looks like 24xx uses mode3 instead of mode4 for muxable GPIO pins. This will be needed when 24xx mux code is converted to use the new mux functions. Signed-off-by: -
Tony Lindgren authored
Move omap1 FS USB platform init code into mach-omap1/usb.c Signed-off-by: -
Tony Lindgren authored
Looks like this code was only working on boards that had the usb_l4_ick enabled in the bootloader. Signed-off-by: -
Tony Lindgren authored
Move omap2 FS USB platform init code into mach-omap2/usb-fs.c. This will allow further work later on to use omap hwmod for initializing the device. Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: -
Tony Lindgren authored
We want to split old FS USB platform init code and stop doing pin multiplexing under plat-omap. First move 24xx specific init code into omap2_usb[012]_init functions. Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
- 02 Jul, 2010 1 commit
-
-
Tony Lindgren authored
Merge branch 'v2.6.35-rc3-iommu-for-next' of git://gitorious.org/~doyu/lk/mainline into omap-for-linus
-
- 30 Jun, 2010 28 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (22 commits) USB: gadget: f_mass_storage: stale common->fsg value bug fix USB: gadget: f_mass_storage: fixed fs descriptors not being updated USB: musb: Enable the maximum supported burst mode for DMA USB: musb: fix Blackfin ulpi stubs USB: MUSB: make non-OMAP platforms build with CONFIG_PM=y USB: musb_core: make disconnect and suspend interrupts work again USB: obey the sysfs power/wakeup setting USB: gadget eth: Fix calculate CRC32 in EEM USB: qcserial: fix a memory leak in qcprobe error path USB: gadget/printer, fix sleep inside atomic USB: isp1362-hcd, fix double lock USB: serial: ftdi: correct merge conflict with CONTEC id USB: fix oops in usb_sg_init() USB: s3c2410: deactivate endpoints before gadget unbinding USB: ehci-mxc: bail out on transceiver problems USB: otg/ulpi: bail out on read errors usb: musb: Fix a bug by making suspend interrupt available in device mode USB: r8a66597: Fix failure in change of status USB: xHCI: Fix bug in link TRB activation change. USB: gadget: g_fs: possible invalid pointer reference bug fixed ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: serial: cpm_uart: implement the cpm_uart_early_write() function for console poll
-
Linus Torvalds authored
Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: OMAP: hwmod: Fix the missing braces OMAP4: clock: Fix multi-omap boot with reset un-used clocks OMAP3: PM: fix IO daisy chain enable to use PM_WKEN reg omap: GPIO: fix auto-disable of debounce clock omap: DMTIMER: Ack pending interrupt always when stopping a timer omap: Stalker board: switch over to gpio_set_debounce omap: fix build failure due to missing include dma-mapping.h omap iommu: Fix Memory leak
-
Jes Sorensen authored
As discussed with Mike Reed, add him as the maintainer of the qla1280 driver as I no longer have any hardware and he is actively looking after it. Signed-off-by:
Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Michal Hocko authored
futex_find_get_task is currently used (through lookup_pi_state) from two contexts, futex_requeue and futex_lock_pi_atomic. None of the paths looks it needs the credentials check, though. Different (e)uids shouldn't matter at all because the only thing that is important for shared futex is the accessibility of the shared memory. The credentail check results in glibc assert failure or process hang (if glibc is compiled without assert support) for shared robust pthread mutex with priority inheritance if a process tries to lock already held lock owned by a process with a different euid: pthread_mutex_lock.c:312: __pthread_mutex_lock_full: Assertion `(-(e)) != 3 || !robust' failed. The problem is that futex_lock_pi_atomic which is called when we try to lock already held lock checks the current holder (tid is stored in the futex value) to get the PI state. It uses lookup_pi_state which in turn gets task struct from futex_find_get_task. ESRCH is returned either when the task is not found or if credentials check fails. futex_lock_pi_atomic simply returns if it gets ESRCH. glibc code, however, doesn't expect that robust lock returns with ESRCH because it should get either success or owner died. Signed-off-by:
Michal Hocko <mhocko@suse.cz> Acked-by:
Darren Hart <dvhltc@us.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Nick Piggin <npiggin@suse.de> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Michal Nazarewicz authored
On fsg_unbind the common->fsg pointer was not NULLed if the unbound fsg_dev instance was the current one. As an effect, the incorrect pointer was preserved in all further operations which caused do_set_interface to reference an invalid region. This commit fixes this by raising an exception in fsg_bind which will change the common->fsg pointer. This also requires an wait queue so that the thread in fsg_bind can wait till the worker thread handles the exception. This commit removes also a config and new_config fields of fsg_common as they are no longer needed since fsg can be used to determine whether function is active or not. Moreover, this commit removes possible race condition where the fsg field was modified in both the worker thread and form various other contexts. This is fixed by replacing prev_fsg with new_fsg. At this point, fsg is assigned only in worker thread. Signed-off-by:
Michal Nazarewicz <m.nazarewicz@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Michal Nazarewicz authored
The full speed descriptors were copied to the usb_function structure in the fsg_bind_config function before call to the usb_ep_autoconfig. The usb_ep_autoconfig was called in fsg_bind using the original descriptors. In effect copied descriptors were not updated. This patch changes the copy full speed descriptors after the call to usb_op_autoconfig is performed. This way, copied full speed descriptors have updated values. Signed-off-by:
Dries Van Puymbroeck <Dries.VanPuymbroeck@dekimo.com> Tested-by:
-
Hema HK authored
Setting MUSB Burst Mode 3 automatically enables support for lower burst modes (BURST4, BURST8, BURST16 or bursts of unspecified length). There is no need to set these burst modes based on the packet size. Also enable the burst mode for both mode1 and mode0. This is a fix for buggy hardware - having the lower burst modes enabled can potentially cause lockups of the DMA engine used in OMAP2/3/4 chips. Signed-off-by:
Hema HK <hemahk@ti.com> Signed-off-by:
Anand Gadiyar <gadiyar@ti.com> Signed-off-by:
Ajay Kumar Gupta <ajay.gupta@ti.com> Acked-by:
Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by:
-
Mike Frysinger authored
The new ulpi code defines fallback stubs for the Blackfin arch, but does so incorrectly leading to a build failure: drivers/usb/musb/musb_core.c:227: error: 'musb_ulpi_read' undeclared here (not in a function) drivers/usb/musb/musb_core.c:228: error: 'musb_ulpi_write' undeclared here (not in a function) Tweak the fallback stubs so that they do work as intended. Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Signed-off-by:
-
Sergei Shtylyov authored
Attempt to build MUSB driver with CONFIG_PM=y (e.g. in the OTG mode) on DaVinci results in these link errors: drivers/built-in.o: In function `musb_restore_context': led-triggers.c:(.text+0x714d8): undefined reference to `musb_platform_restore_context' drivers/built-in.o: In function `musb_save_context': led-triggers.c:(.text+0x71788): undefined reference to `musb_platform_save_context' This turned out to be caused by commit 9957dd97 (usb: musb: Fix compile error for omaps for musb_hdrc). Revert it, taking into account the rename of CONFIG_ARCH_OMAP34XX into CONFIG_ARCH_OMAP3 (which that commit fixed in a completely inappropriate way) and the recent addition of OMAP4 support. Signed-off-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
-
Sergei Shtylyov authored
Commit 1c25fda4 (usb: musb: handle irqs in the order dictated by programming guide) forgot to get rid of the old 'STAGE0_MASK' filter for calling musb_stage0_irq(), so now disconnect and suspend interrupts are effectively ignored... Signed-off-by:
-
Alan Stern authored
This patch (as1403) is a partial reversion of an earlier change (commit 5f677f1d "USB: fix remote wakeup settings during system sleep"). After hearing from a user, I realized that remote wakeup should be enabled during system sleep whenever userspace allows it, and not only if a driver requests it too. Indeed, there could be a device with no driver, that does nothing but generate a wakeup request when the user presses a button. Such a device should be allowed to do its job. The problem fixed by the earlier patch -- device generating a wakeup request for no reason, causing system suspend to abort -- was also addressed by a later patch ("USB: don't enable remote wakeup by default", accepted but not yet merged into mainline). The device won't be able to generate the bogus wakeup requests because it will be disabled for remote wakeup by default. Hence this reversion will not re-introduce any old problems. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> [.34] Signed-off-by:
-
Jiri Pinkava authored
CRC should be calculated for Ethernet frame, not for whole recievede EEM data. This bug shows rarely, because in many times len == skb->len. Signed-off-by:
Jiri Pinkava <jiri.pinkava@vscht.cz> Signed-off-by:
-
Axel Lin authored
This patch adds missing kfree(data) before return -ENODEV. Signed-off-by:
Axel Lin <axel.lin@gmail.com> Signed-off-by:
-
Jiri Slaby authored
Stanse found that sleep is called inside atomic context created by lock_printer_io spinlock in several functions. It's used in process context only and some functions sleep inside its critical section. As this is not allowed for spinlocks, switch it to mutex. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: Craig W. Nadler <craig@nadler.us> Acked-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Jiri Slaby authored
Stanse found that isp1362_sw_reset tries to take a isp1362_hcd->lock, but it is already held in isp1362_hc_stop. Avoid that by introducing __isp1362_sw_reset which doesn't take the lock and call it from isp1362_hc_stop. isp1362_sw_reset is then as simple as lock -- __isp1362_sw_reset -- unlock. Signed-off-by:
-
Daniel Sangorrin authored
This patch corrects a problem with the merge of a previous patch to add the CONTEC identifier. I believe the merge problem occurred with the commit: dee5658b Originally I submitted a patch and then they asked me to order the IDs and resubmit, so did I. But unfortunately in the end somehow both patches were merged. Signed-off-by:
Daniel Sangorrin <daniel.sangorrin@gmail.com> Signed-off-by:
-
Alan Stern authored
This patch (as1401) fixes a bug in usb_sg_init() that can cause an invalid pointer dereference. An inner loop reuses some local variables in an unsafe manner, so new variables are introduced. Signed-off-by:
-
Vladimir Zapolskiy authored
Gadget disconnect must be called before unbinding to avoid races. The change fixes an oops on g_ether module unregistering. Signed-off-by:
Vladimir Zapolskiy <vzapolskiy@gmail.com> Signed-off-by:
-
Wolfram Sang authored
The old code registered the hcd even if there were no transceivers detected, leading to oopses like this if we try to probe a non-existant ULPI: [ 2.730000] mxc-ehci mxc-ehci.0: unable to init transceiver [ 2.740000] timeout polling for ULPI device [ 2.740000] timeout polling for ULPI device [ 2.750000] mxc-ehci mxc-ehci.0: unable to enable vbus on transceiver [ 2.750000] mxc-ehci mxc-ehci.0: Freescale On-Chip EHCI Host Controller [ 2.760000] mxc-ehci mxc-ehci.0: new USB bus registered, assigned bus number 2 [ 2.770000] Unhandled fault: external abort on non-linefetch (0x808) at 0xc4876184 [ 2.770000] Internal error: : 808 [#1] PREEMPT [ 2.770000] last sysfs file: [ 2.770000] Modules linked in: [ 2.770000] CPU: 0 Not tainted (2.6.33.5 #5) [ 2.770000] PC is at ehci_hub_control+0x4d4/0x8f8 [ 2.770000] LR is at ehci_mxc_setup+0xbc/0xdc [ 2.770000] pc : [<c0196dfc>] lr : [<c019bc8c>] psr: 00000093 [ 2.770000] sp : c3815e40 ip : 00000001 fp : 60000013 [ 2.770000] r10: c4876184 r9 : 00000000 r8 : c3814000 [ 2.770000] r7 : c391d2cc r6 : 00000001 r5 : 00000001 r4 : 00000000 [ 2.770000] r3 : 80000000 r2 : 00000007 r1 : 80000000 r0 : c4876184 [ 2.770000] Flags: nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel [ 2.770000] Control: 0005317f Table: a0004000 DAC: 00000017 [ 2.770000] Process swapper (pid: 1, stack limit = 0xc3814270) ... Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: stable <stable@kernel.org> Acked-by:
Daniel Mack <daniel@caiaq.de> Signed-off-by:
-
Wolfram Sang authored
otg_read may return errnos, so bail out correctly to prevent bogus ID-numbers. Signed-off-by:
-
Maulik Mankad authored
As a part of aligning the ISR code for MUSB with the specs, the ISR code was re-written. See Commit 1c25fda4 (usb: musb: handle irqs in the order dictated by programming guide) With this the suspend interrupt came accidently under CONFIG_USB_MUSB_HDRC_HCD. The fix brings suspend interrupt handling outside CONFIG_USB_MUSB_HDRC_HCD. Signed-off-by:
Maulik Mankad <x0082077@ti.com> Cc: David Brownell <david-b@pacbell.net> Acked-by:
-
Nobuhiro Iwamatsu authored
In the change by 749da5f8, The change in the status when the USB device is connected is wrong. Therefore, the device is not recognized. Acked-by:
Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by:
-
Sarah Sharp authored
Commit 6c12db90 introduced a bug for control transfers. The patch was supposed to change when the link TRBs at the end of each ring segment were given to the hardware. If a transfer descriptor (TD) ended just before the link TRB, the code wouldn't give back the link TRB to the hardware; instead it would be given back in prepare_ring() just before the next TD was enqueued at the top of the ring. Unfortunately, the code relied on checking the chain bit of the TRB to determine whether the TD ended just before the link TRB. It assumed that the ring enqueuing code would call prepare_ring() before enqueuing the next TD. However, control transfers are made of multiple TDs, and prepare_ring() is only called once before enqueuing two or three TDs. If the first or second TD of the control transfer ended just before the link TRB, then the code in inc_enq() would not move the enqueue pointer past the link TRB, and the link TRB would get overwritten. This would cause the xHCI driver to start writing to memory past the ring segment, and eventually the system would crash or hang. The fix is to add a flag to inc_enq() that says whether the caller will enqueue more TDs before calling prepare_ring(). If the chain bit is cleared (meaning this is the last TRB in a TD), and the caller will not enqueue more TDs, then we defer giving back the link TRB. Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
Michal Nazarewicz authored
During __gfs_do_config() some invalid pointers may be left in usb_configuration::interfaces array from previous calls to the __gfs_do_config() for the same configuration. This will always happen if an user space function which has a fewer then the last user space function registers itself. Composite's set_config() function that a pointer after the last interface in usb_configuration::interface is NULL unless the array is full. This patch makes the __gfs_do_config() make sure that if the usb_configuration::interface is not full then a pointer after the last interface is NULL. Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Jon Povey authored
Call put_tty_driver() in cleanup function, to fix Oops when trying to open gadget serial char device after module unload. Signed-off-by:
Jon Povey <jon.povey@racelogic.co.uk> Acked-by:
-
Jon Povey authored
No longer set low_latency flag as it causes this warning backtrace: WARNING: at kernel/mutex.c:207 __mutex_lock_slowpath+0x6c/0x288() Fix associated locking and wakeups. Signed-off-by:
-
Dongdong Deng authored
The cpm_uart_early_write() function which was used for console poll isn't implemented in the cpm uart driver. Implementing this function both fixes the build when CONFIG_CONSOLE_POLL is set and allows kgdboc to work via the cpm uart. Signed-off-by:
Dongdong Deng <dongdong.deng@windriver.com> Reviewed-by:
Bruce Ashfield <bruce.ashfield@windriver.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
- 29 Jun, 2010 4 commits
-
-
Andrew Morton authored
Fix a lockdep-splat-causing regression introduced by commit 989a2979 ("fasync: RCU and fine grained locking"). kill_fasync() can be called from both process and hard-irq context, so fa_lock must be taken with IRQs disabled. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16230Reported-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reported-by:
Dominik Brodowski <linux@dominikbrodowski.net> Tested-by:
Eric Dumazet <eric.dumazet@gmail.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: "David S. Miller" <davem@davemloft.net> Acked-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Liu Aleaxander authored
The os-linux/mem.c file calls fchmod function, which is declared in sys/stat.h header file, so include it. Fixes build breakage under FC13. Signed-off-by:
Liu Aleaxander <Aleaxander@gmail.com> Acked-by:
Boaz Harrosh <bharrosh@panasas.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: <stable@kernel.org> Signed-off-by:
-
Wan ZongShun authored
Fix a nuc900 lcd build error. Since the 'nuc900_driver_clksrc_div()' API cannot be merged into mainline successfully, I removed this clock source selection hook in this driver. This means nuc900 lcd driver has to select default clock source from the external crystal now. Signed-off-by:
Wan ZongShun <mcuos.com@gmail.com> Cc: Qiang Wang <rurality.wq@gmail.com> Signed-off-by:
-
Lubomir Rintel authored
A call to sysv_write_inode() in sysv_new_inode() to its new interface that replaced wait flag with writeback structure. This was broken by a9185b41 ("pass writeback_control to ->write_inode"). Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@kernel.org> [2.6.34.x] Signed-off-by:
-
