- 02 Oct, 2021 1 commit
-
-
Rajesh Patil authored
Add device tree compatible for sc7180 SoC. Signed-off-by: Rajesh Patil <rajpat@codeaurora.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/1632997450-32293-2-git-send-email-rajpat@codeaurora.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 01 Oct, 2021 4 commits
-
-
Sai Krishna Potthuri authored
Add support to read the data from the flash using external DMA. Cadence Octal SPI Flash Controller has optional DMA peripheral interface to communicate indirect mode of operations with external DMA. Xilinx Versal OSPI has external DMA enabled, this will automatically request the external DMA to fetch the data from SRAM. It supports only reading the data from SRAM (DMA read) and doesn't support writing the data to SRAM (DMA write). Xilinx Versal OSPI read the data from the flash device using external DMA and write the data to the flash device using software triggered indirect mode. Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> Link: https://lore.kernel.org/r/1632478031-12242-5-git-send-email-lakshmi.sai.krishna.potthuri@xilinx.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Sai Krishna Potthuri authored
Add OSPI support for Xilinx Versal SoCs. Disable the Direct Access Controller for Xilinx Versal OSPI. On Xilinx Versal platform, AXI interface need to be selected as Linear mode (driven from interconnect rather than external DMA) to use Software triggered 'indirect' mode of operation. This will be achieved by calling Xilinx firmware API. Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> Link: https://lore.kernel.org/r/1632478031-12242-4-git-send-email-lakshmi.sai.krishna.potthuri@xilinx.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Sai Krishna Potthuri authored
Add new compatible to support Cadence Octal SPI(OSPI) controller on Xilinx Versal SoCs, also add power-domains property to the properties list and marked as required for Xilinx Versal OSPI compatible. Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> Link: https://lore.kernel.org/r/1632478031-12242-3-git-send-email-lakshmi.sai.krishna.potthuri@xilinx.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Sai Krishna Potthuri authored
Add OSPI Mux selection API support to select the AXI interface to OSPI. Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> Link: https://lore.kernel.org/r/1632478031-12242-2-git-send-email-lakshmi.sai.krishna.potthuri@xilinx.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 28 Sep, 2021 1 commit
-
-
Colin Ian King authored
There is a spelling mistake in a dev_err error message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Parshuram Thombare <pthombar@cadence.com> Link: https://lore.kernel.org/r/20210928130712.990474-1-colin.king@canonical.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 27 Sep, 2021 5 commits
-
-
Mark Brown authored
Merge series "add support for Cadence's XSPI controller" from Parshuram Thombare <pthombar@cadence.com>: This patch series adds support for Cadence's XSPI controller. It supports 3 work modes. 1. ACMD (auto command) work mode ACMD name is because it uses auto command engine in the controller. It further has 2 modes PIO and CDMA (command DMA). The CDMA work mode is dedicated for high-performance application where very low software overhead is required. In this mode the Command Engine is programmed by the series of linked descriptors stored in system memory. These descriptors provide commands to execute and store status information for finished commands. The PIO mode work mode is dedicated for single operation where constructing a linked list of descriptors would require too much effort. 2. STIG (Software Triggered Instruction Generator) work mode In STIG mode, controller sends low-level instructions to memory. Each instruction is 128-bit width. There is special instruction DataSequence which carries information about data phase. Driver uses Slave DMA interface to transfer data as only this interface can be used in STIG work mode. 3. Direct work mode This work mode allows sending data without invoking any command through the slave interface. Currently only STIG work mode is enabled, remaining work modes will be added later. Changes since v5: 1. Added adjust_op_size to adjust op size according to sdma size. Changes since v4: 1. Changed reg region names and lengths as suggested by Rob. Changes since v3: 1. Removed ACMD PIO mode. 2. Return IRQ_HANDLED only for handled interrupts. 3. DT binding changes. Changes since v2: 1. Removed extra lock around exec_op. 2. Removed PHY parameters setting from the driver, those will be handled by bootstrap pins available in the controller. Changes since v1: 1. Use ACMD PIO work mode for NOR read, program and erase operations, for everything else use STIG(Software Triggered Instruction Generator) work mode. 2. Changes suggested by Lukas. Parshuram Thombare (2): spi: cadence: add dt-bindings documentation for Cadence XSPI controller spi: cadence: add support for Cadence XSPI controller .../devicetree/bindings/spi/cdns,xspi.yaml | 77 +++ drivers/spi/Kconfig | 12 + drivers/spi/Makefile | 1 + drivers/spi/spi-cadence-xspi.c | 640 +++++++++++++++++++++ 4 files changed, 730 insertions(+) create mode 100644 Documentation/devicetree/bindings/spi/cdns,xspi.yaml create mode 100644 drivers/spi/spi-cadence-xspi.c -- 2.7.4
-
Rajesh Patil authored
Add compatible for sc7280 SoC. Signed-off-by: Rajesh Patil <rajpat@codeaurora.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1632725335-4570-1-git-send-email-rajpat@codeaurora.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Krzysztof Kozlowski authored
Describe better which driver applies to which SoC, to make configuring kernel for Samsung SoC easier. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210924133114.111777-1-krzysztof.kozlowski@canonical.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Parshuram Thombare authored
This patch adds driver for Cadence's XSPI controller. It supports 3 work modes. 1. ACMD (auto command) work mode ACMD name is because it uses auto command engine in the controller. It further has 2 modes PIO and CDMA (command DMA). The CDMA work mode is dedicated for high-performance application where very low software overhead is required. In this mode the Command Engine is programmed by the series of linked descriptors stored in system memory. These descriptors provide commands to execute and store status information for finished commands. The PIO mode work mode is dedicated for single operation where constructing a linked list of descriptors would require too much effort. 2. STIG (Software Triggered Instruction Generator) work mode In STIG mode, controller sends low-level instructions to memory. Each instruction is 128-bit width. There is special instruction DataSequence which carries information about data phase. Driver uses Slave DMA interface to transfer data as only this interface can be used in STIG work mode. 3. Direct work mode This work mode allows sending data without invoking any command through the slave interface. Currently only STIG work mode is enabled, remaining work modes will be added later. Signed-off-by: Konrad Kociolek <konrad@cadence.com> Signed-off-by: Jayshri Pawar <jpawar@cadence.com> Signed-off-by: Parshuram Thombare <pthombar@cadence.com> Acked-by: Pratyush Yadav <p.yadav@ti.com> Link: https://lore.kernel.org/r/1632038734-23999-1-git-send-email-pthombar@cadence.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Parshuram Thombare authored
Add DT binding for Cadence's XSPI controller driver. Signed-off-by: Konrad Kociolek <konrad@cadence.com> Signed-off-by: Jayshri Pawar <jpawar@cadence.com> Signed-off-by: Parshuram Thombare <pthombar@cadence.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1632038705-23805-1-git-send-email-pthombar@cadence.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 21 Sep, 2021 2 commits
-
-
Mark Brown authored
-
Mark Brown authored
Linux 5.15-rc2
-
- 20 Sep, 2021 3 commits
-
-
Yoshitaka Ikeda authored
The reason for dividing by zero is because the dummy bus width is zero, but if the dummy n bytes is zero, it indicates that there is no data transfer, so there is no need for calculation. Fixes: 7512eaf5 ("spi: cadence-quadspi: Fix dummy cycle calculation when buswidth > 1") Signed-off-by: Yoshitaka Ikeda <ikeda@nskint.co.jp> Acked-by: Pratyush Yadav <p.yadav@ti.com> Link: https://lore.kernel.org/r/OSZPR01MB70049C8F56ED8902852DF97B8BD49@OSZPR01MB7004.jpnprd01.prod.outlook.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Linus Torvalds authored
-
Linus Torvalds authored
Nathan Chancellor reports that the recent change to pci_iounmap in commit 9caea000 ("parisc: Declare pci_iounmap() parisc version only when CONFIG_PCI enabled") causes build errors on arm64. It took me about two hours to convince myself that I think I know what the logic of that mess of #ifdef's in the <asm-generic/io.h> header file really aim to do, and rewrite it to be easier to follow. Famous last words. Anyway, the code has now been lifted from that grotty header file into lib/pci_iomap.c, and has fairly extensive comments about what the logic is. It also avoids indirecting through another confusing (and badly named) helper function that has other preprocessor config conditionals. Let's see what odd architecture did something else strange in this area to break things. But my arm64 cross build is clean. Fixes: 9caea000 ("parisc: Declare pci_iounmap() parisc version only when CONFIG_PCI enabled") Reported-by: Nathan Chancellor <nathan@kernel.org> Cc: Helge Deller <deller@gmx.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Ulrich Teichert <krypton@ulrich-teichert.org> Cc: James Bottomley <James.Bottomley@hansenpartnership.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 19 Sep, 2021 18 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: - Prevent a infinite loop in the MCE recovery on return to user space, which was caused by a second MCE queueing work for the same page and thereby creating a circular work list. - Make kern_addr_valid() handle existing PMD entries, which are marked not present in the higher level page table, correctly instead of blindly dereferencing them. - Pass a valid address to sanitize_phys(). This was caused by the mixture of inclusive and exclusive ranges. memtype_reserve() expect 'end' being exclusive, but sanitize_phys() wants it inclusive. This worked so far, but with end being the end of the physical address space the fail is exposed. - Increase the maximum supported GPIO numbers for 64bit. Newer SoCs exceed the previous maximum. * tag 'x86_urgent_for_v5.15_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Avoid infinite loop for copy from user recovery x86/mm: Fix kern_addr_valid() to cope with existing but not present entries x86/platform: Increase maximum GPIO number for X86_64 x86/pat: Pass valid address to sanitize_phys()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf event fix from Thomas Gleixner: "A single fix for the perf core where a value read with READ_ONCE() was checked and then reread which makes all the checks invalid. Reuse the already read value instead" * tag 'perf-urgent-2021-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: events: Reuse value read using READ_ONCE instead of re-reading it
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixes from Thomas Gleixner: "A set of updates for the RT specific reader/writer locking base code: - Make the fast path reader ordering guarantees correct. - Code reshuffling to make the fix simpler" [ This plays ugly games with atomic_add_return_release() because we don't have a plain atomic_add_release(), and should really be cleaned up, I think - Linus ] * tag 'locking-urgent-2021-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/rwbase: Take care of ordering guarantee for fastpath reader locking/rwbase: Extract __rwbase_write_trylock() locking/rwbase: Properly match set_and_save_state() to restore_state()
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Fix crashes when scv (System Call Vectored) is used to make a syscall when a transaction is active, on Power9 or later. - Fix bad interactions between rfscv (Return-from scv) and Power9 fake-suspend mode. - Fix crashes when handling machine checks in LPARs using the Hash MMU. - Partly revert a recent change to our XICS interrupt controller code, which broke the recently added Microwatt support. Thanks to Cédric Le Goater, Eirik Fuller, Ganesh Goudar, Gustavo Romero, Joel Stanley, Nicholas Piggin. * tag 'powerpc-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/xics: Set the IRQ chip data for the ICS native backend powerpc/mce: Fix access error in mce handler KVM: PPC: Book3S HV: Tolerate treclaim. in fake-suspend mode changing registers powerpc/64s: system call rfscv workaround for TM bugs selftests/powerpc: Add scv versions of the basic TM syscall tests powerpc/64s: system call scv tabort fix for corrupt irq soft-mask state
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix bugs in checkkconfigsymbols.py - Fix missing sys import in gen_compile_commands.py - Fix missing FORCE warning for ARCH=sh builds - Fix -Wignored-optimization-argument warnings for Clang builds - Turn -Wignored-optimization-argument into an error in order to stop building instead of sprinkling warnings * tag 'kbuild-fixes-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: Add -Werror=ignored-optimization-argument to CLANG_FLAGS x86/build: Do not add -falign flags unconditionally for clang kbuild: Fix comment typo in scripts/Makefile.modpost sh: Add missing FORCE prerequisites in Makefile gen_compile_commands: fix missing 'sys' package checkkconfigsymbols.py: Remove skipping of help lines in parse_kconfig_file checkkconfigsymbols.py: Forbid passing 'HEAD' to --commit
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v5.15-2021-09-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix ip display in 'perf script' when output type != attr->type. - Ignore deprecation warning when using libbpf'sg btf__get_from_id(), fixing the build with libbpf v0.6+. - Make use of FD() robust in libperf, fixing a segfault with 'perf stat --iostat list'. - Initialize addr_location:srcline pointer to NULL when resolving callchain addresses. - Fix fused instruction logic for assembly functions in 'perf annotate'. * tag 'perf-tools-fixes-for-v5.15-2021-09-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf bpf: Ignore deprecation warning when using libbpf's btf__get_from_id() libperf evsel: Make use of FD robust. perf machine: Initialize srcline string member in add_location struct perf script: Fix ip display when type != attr->type perf annotate: Fix fused instr logic for assembly functions
-
Linus Torvalds authored
The old dmascc driver depends on the legacy ISA_DMA_API, and blindly just casts the kernel virtual address to 'int' for set_dma_addr(). That works only incidentally, and because the high bits of the address will be ignored anyway. And on 64-bit architectures it causes warnings. Admittedly, 64-bit architectures with ISA are basically dead - I think the only example of this is alpha, and nobody would ever use the dmascc driver there. But hey, the fix is easy enough, the end result is cleaner, and it's yet another configuration that now builds without warnings. If somebody actually uses this driver on an alpha and this fixes it for you, please email me. Because that is just incredibly bizarre. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
With the previous commit (9caea000: "parisc: Declare pci_iounmap() parisc version only when CONFIG_PCI enabled") we can now enable GENERIC_PCI_IOMAP unconditionally on alpha, and if PCI is not enabled we will just get the nice empty helper functions that allow mixed-bus drivers to build. Example driver: the old 3com/3c59x.c driver works with either the PCI or the EISA version of the 3x59x card, but wouldn't build in an EISA-only configuration because of missing pci_iomap() and pci_iounmap() dummy wrappers. Most of the other PCI infrastructure just becomes empty wrappers even without GENERIC_PCI_IOMAP, and it's not obvious that the pci_iomap functionality shouldn't do the same, but this works. Cc: Ulrich Teichert <krypton@ulrich-teichert.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Helge Deller authored
Linus noticed odd declaration rules for pci_iounmap() in iomap.h and pci_iomap.h, where it dependend on either NO_GENERIC_PCI_IOPORT_MAP or GENERIC_IOMAP when CONFIG_PCI was disabled. Testing on parisc seems to indicate that we need pci_iounmap() only when CONFIG_PCI is enabled, so the declaration of pci_iounmap() can be moved cleanly into pci_iomap.h in sync with the declarations of pci_iomap(). Link: https://lore.kernel.org/all/CAHk-=wjRrh98pZoQ+AzfWmsTZacWxTJKXZ9eKU2X_0+jM=O8nw@mail.gmail.com/Signed-off-by: Helge Deller <deller@gmx.de> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Fixes: 97a29d59 ("[PARISC] fix compile break caused by iomap: make IOPORT/PCI mapping functions conditional") Cc: Arnd Bergmann <arnd@arndb.de> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Ulrich Teichert <krypton@ulrich-teichert.org> Cc: James Bottomley <James.Bottomley@hansenpartnership.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
This reverts commit 27da370e. Sudip Mukherjee reports that this broke pulseaudio with a NULL pointer dereference in vc4_hdmi_audio_prepare(), bisected it to this commit, and confirmed that a revert fixed the problem. Revert the problematic commit until fixed. Link: https://lore.kernel.org/all/CADVatmPB9-oKd=ypvj25UYysVo6EZhQ6bCM7EvztQBMyiZfAyw@mail.gmail.com/ Link: https://lore.kernel.org/all/CADVatmN5EpRshGEPS_JozbFQRXg5w_8LFB3OMP1Ai-ghxd3w4g@mail.gmail.com/Reported-and-tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Emma Anholt <emma@anholt.net> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
This reverts commits 9984d666 ("drm/vc4: hdmi: Make sure the controller is powered in detect") 411efa18 ("drm/vc4: hdmi: Move the HSM clock enable to runtime_pm") as Michael Stapelberg reports that the new runtime PM changes cause his Raspberry Pi 3 to hang on boot, probably due to interactions with other changes in the DRM tree (because a bisect points to the merge in commit e058a84b: "Merge tag 'drm-next-2021-07-01' of git://.../drm"). Revert these two commits until it's been resolved. Link: https://lore.kernel.org/all/871r5mp7h2.fsf@midna.i-did-not-set--mail-host-address--so-tickle-me/Reported-and-tested-by: Michael Stapelberg <michael@stapelberg.ch> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Dave Stevenson <dave.stevenson@raspberrypi.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Nathan Chancellor authored
Similar to commit 589834b3 ("kbuild: Add -Werror=unknown-warning-option to CLANG_FLAGS"). Clang ignores certain GCC flags that it has not implemented, only emitting a warning: $ echo | clang -fsyntax-only -falign-jumps -x c - clang-14: warning: optimization flag '-falign-jumps' is not supported [-Wignored-optimization-argument] When one of these flags gets added to KBUILD_CFLAGS unconditionally, all subsequent cc-{disable-warning,option} calls fail because -Werror was added to these invocations to turn the above warning and the equivalent -W flag warning into errors. To catch the presence of these flags earlier, turn -Wignored-optimization-argument into an error so that the flags can either be implemented or ignored via cc-option and there are no more weird errors. Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
-
Nathan Chancellor authored
clang does not support -falign-jumps and only recently gained support for -falign-loops. When one of the configuration options that adds these flags is enabled, clang warns and all cc-{disable-warning,option} that follow fail because -Werror gets added to test for the presence of this warning: clang-14: warning: optimization flag '-falign-jumps=0' is not supported [-Wignored-optimization-argument] To resolve this, add a couple of cc-option calls when building with clang; gcc has supported these options since 3.2 so there is no point in testing for their support. -falign-functions was implemented in clang-7, -falign-loops was implemented in clang-14, and -falign-jumps has not been implemented yet. Link: https://lore.kernel.org/r/YSQE2f5teuvKLkON@Ryzen-9-3900X.localdomain/ Link: https://lore.kernel.org/r/20210824022640.2170859-2-nathan@kernel.org/Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
-
Ramji Jiyani authored
Change comment "create one <module>.mod.c file pr. module" to "create one <module>.mod.c file per module" Signed-off-by: Ramji Jiyani <ramjiyani@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
-
Geert Uytterhoeven authored
make: arch/sh/boot/Makefile:87: FORCE prerequisite is missing Add the missing FORCE prerequisites for all build targets identified by "make help". Fixes: e1f86d7b ("kbuild: warn if FORCE is missing for if_changed(_dep,_rule) and filechk") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
-
Kortan authored
We need to import the 'sys' package since the script has called sys.exit() method. Fixes: 6ad7cbc0 ("Makefile: Add clang-tidy and static analyzer support to makefile") Signed-off-by: Kortan <kortanzh@gmail.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
-
Ariel Marcovitch authored
When parsing Kconfig files to find symbol definitions and references, lines after a 'help' line are skipped until a new config definition starts. However, Kconfig statements can actually be after a help section, as long as these have shallower indentation. These are skipped by the parser. This means that symbols referenced in this kind of statements are ignored by this function and thus are not considered undefined references in case the symbol is not defined. Remove the 'skip' logic entirely, as it is not needed if we just use the STMT regex to find the end of help lines. However, this means that keywords that appear as part of the help message (i.e. with the same indentation as the help lines) it will be considered as a reference/definition. This can happen now as well, but only with REGEX_KCONFIG_DEF lines. Also, the keyword must have a SYMBOL after it, which probably means that someone referenced a config in the help so it seems like a bonus :) The real solution is to keep track of the indentation when a the first help line in encountered and then handle DEF and STMT lines only if the indentation is shallower. Signed-off-by: Ariel Marcovitch <arielmarcovitch@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
-
Ariel Marcovitch authored
As opposed to the --diff option, --commit can get ref names instead of commit hashes. When using the --commit option, the script resets the working directory to the commit before the given ref, by adding '~' to the end of the ref. However, the 'HEAD' ref is relative, and so when the working directory is reset to 'HEAD~', 'HEAD' points to what was 'HEAD~'. Then when the script resets to 'HEAD' it actually stays in the same commit. In this case, the script won't report any cases because there is no diff between the cases of the two refs. Prevent the user from using HEAD refs. A better solution might be to resolve the refs before doing the reset, but for now just disallow such refs. Signed-off-by: Ariel Marcovitch <arielmarcovitch@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
-
- 18 Sep, 2021 6 commits
-
-
Linus Torvalds authored
We already had the implementation for __udiv_qrnnd (unsigned divide for multi-precision arithmetic) as part of the alpha math emulation code. But you can disable the math emulation code - even if you shouldn't - and then the MPI code that actually wants this functionality (and is needed by various crypto functions) will fail to build. So move the extended-precision divide code to be a regular library function, just like all the regular division code is. That way ie is available regardless of math-emulation. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Ok, it almost certainly is still broken on actual hardware, but the immediate reason for it having been marked BROKEN was a build error that is fixed by just making sure the low-level IO header file is included sufficiently early that the __EXTERN_INLINE hackery takes effect. This was marked broken back in 2017 by commit 1883c9f4 ("alpha: mark jensen as broken"), but Ulrich Teichert made me look at it as part of my cross-build work to make sure -Werror actually does the right thing. There are lots of alpha configurations that do not build cleanly, but now it's no longer because Jensen wouldn't be buildable. That said, because the Jensen platform doesn't force PCI to be enabled (Jensen only had EISA), it ends up being somewhat interesting as a source of odd configs. Reported-by: Ulrich Teichert <krypton@ulrich-teichert.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andrii Nakryiko authored
Perf code re-implements libbpf's btf__load_from_kernel_by_id() API as a weak function, presumably to dynamically link against old version of libbpf shared library. Unfortunately this causes compilation warning when perf is compiled against libbpf v0.6+. For now, just ignore deprecation warning, but there might be a better solution, depending on perf's needs. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: kernel-team@fb.com LPU-Reference: 20210914170004.4185659-1-andrii@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Ian Rogers authored
FD uses xyarray__entry that may return NULL if an index is out of bounds. If NULL is returned then a segv happens as FD unconditionally dereferences the pointer. This was happening in a case of with perf iostat as shown below. The fix is to make FD an "int*" rather than an int and handle the NULL case as either invalid input or a closed fd. $ sudo gdb --args perf stat --iostat list ... Breakpoint 1, perf_evsel__alloc_fd (evsel=0x5555560951a0, ncpus=1, nthreads=1) at evsel.c:50 50 { (gdb) bt #0 perf_evsel__alloc_fd (evsel=0x5555560951a0, ncpus=1, nthreads=1) at evsel.c:50 #1 0x000055555585c188 in evsel__open_cpu (evsel=0x5555560951a0, cpus=0x555556093410, threads=0x555556086fb0, start_cpu=0, end_cpu=1) at util/evsel.c:1792 #2 0x000055555585cfb2 in evsel__open (evsel=0x5555560951a0, cpus=0x0, threads=0x555556086fb0) at util/evsel.c:2045 #3 0x000055555585d0db in evsel__open_per_thread (evsel=0x5555560951a0, threads=0x555556086fb0) at util/evsel.c:2065 #4 0x00005555558ece64 in create_perf_stat_counter (evsel=0x5555560951a0, config=0x555555c34700 <stat_config>, target=0x555555c2f1c0 <target>, cpu=0) at util/stat.c:590 #5 0x000055555578e927 in __run_perf_stat (argc=1, argv=0x7fffffffe4a0, run_idx=0) at builtin-stat.c:833 #6 0x000055555578f3c6 in run_perf_stat (argc=1, argv=0x7fffffffe4a0, run_idx=0) at builtin-stat.c:1048 #7 0x0000555555792ee5 in cmd_stat (argc=1, argv=0x7fffffffe4a0) at builtin-stat.c:2534 #8 0x0000555555835ed3 in run_builtin (p=0x555555c3f540 <commands+288>, argc=3, argv=0x7fffffffe4a0) at perf.c:313 #9 0x0000555555836154 in handle_internal_command (argc=3, argv=0x7fffffffe4a0) at perf.c:365 #10 0x000055555583629f in run_argv (argcp=0x7fffffffe2ec, argv=0x7fffffffe2e0) at perf.c:409 #11 0x0000555555836692 in main (argc=3, argv=0x7fffffffe4a0) at perf.c:539 ... (gdb) c Continuing. Error: The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (uncore_iio_0/event=0x83,umask=0x04,ch_mask=0xF,fc_mask=0x07/). /bin/dmesg | grep -i perf may provide additional information. Program received signal SIGSEGV, Segmentation fault. 0x00005555559b03ea in perf_evsel__close_fd_cpu (evsel=0x5555560951a0, cpu=1) at evsel.c:166 166 if (FD(evsel, cpu, thread) >= 0) v3. fixes a bug in perf_evsel__run_ioctl where the sense of a branch was backward. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20210918054440.2350466-1-irogers@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Michael Petlan authored
It's later supposed to be either a correct address or NULL. Without the initialization, it may contain an undefined value which results in the following segmentation fault: # perf top --sort comm -g --ignore-callees=do_idle terminates with: #0 0x00007ffff56b7685 in __strlen_avx2 () from /lib64/libc.so.6 #1 0x00007ffff55e3802 in strdup () from /lib64/libc.so.6 #2 0x00005555558cb139 in hist_entry__init (callchain_size=<optimized out>, sample_self=true, template=0x7fffde7fb110, he=0x7fffd801c250) at util/hist.c:489 #3 hist_entry__new (template=template@entry=0x7fffde7fb110, sample_self=sample_self@entry=true) at util/hist.c:564 #4 0x00005555558cb4ba in hists__findnew_entry (hists=hists@entry=0x5555561d9e38, entry=entry@entry=0x7fffde7fb110, al=al@entry=0x7fffde7fb420, sample_self=sample_self@entry=true) at util/hist.c:657 #5 0x00005555558cba1b in __hists__add_entry (hists=hists@entry=0x5555561d9e38, al=0x7fffde7fb420, sym_parent=<optimized out>, bi=bi@entry=0x0, mi=mi@entry=0x0, sample=sample@entry=0x7fffde7fb4b0, sample_self=true, ops=0x0, block_info=0x0) at util/hist.c:288 #6 0x00005555558cbb70 in hists__add_entry (sample_self=true, sample=0x7fffde7fb4b0, mi=0x0, bi=0x0, sym_parent=<optimized out>, al=<optimized out>, hists=0x5555561d9e38) at util/hist.c:1056 #7 iter_add_single_cumulative_entry (iter=0x7fffde7fb460, al=<optimized out>) at util/hist.c:1056 #8 0x00005555558cc8a4 in hist_entry_iter__add (iter=iter@entry=0x7fffde7fb460, al=al@entry=0x7fffde7fb420, max_stack_depth=<optimized out>, arg=arg@entry=0x7fffffff7db0) at util/hist.c:1231 #9 0x00005555557cdc9a in perf_event__process_sample (machine=<optimized out>, sample=0x7fffde7fb4b0, evsel=<optimized out>, event=<optimized out>, tool=0x7fffffff7db0) at builtin-top.c:842 #10 deliver_event (qe=<optimized out>, qevent=<optimized out>) at builtin-top.c:1202 #11 0x00005555558a9318 in do_flush (show_progress=false, oe=0x7fffffff80e0) at util/ordered-events.c:244 #12 __ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP, timestamp=timestamp@entry=0) at util/ordered-events.c:323 #13 0x00005555558a9789 in __ordered_events__flush (timestamp=<optimized out>, how=<optimized out>, oe=<optimized out>) at util/ordered-events.c:339 #14 ordered_events__flush (how=OE_FLUSH__TOP, oe=0x7fffffff80e0) at util/ordered-events.c:341 #15 ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP) at util/ordered-events.c:339 #16 0x00005555557cd631 in process_thread (arg=0x7fffffff7db0) at builtin-top.c:1114 #17 0x00007ffff7bb817a in start_thread () from /lib64/libpthread.so.0 #18 0x00007ffff5656dc3 in clone () from /lib64/libc.so.6 If you look at the frame #2, the code is: 488 if (he->srcline) { 489 he->srcline = strdup(he->srcline); 490 if (he->srcline == NULL) 491 goto err_rawdata; 492 } If he->srcline is not NULL (it is not NULL if it is uninitialized rubbish), it gets strdupped and strdupping a rubbish random string causes the problem. Also, if you look at the commit 1fb7d06a, it adds the srcline property into the struct, but not initializing it everywhere needed. Committer notes: Now I see, when using --ignore-callees=do_idle we end up here at line 2189 in add_callchain_ip(): 2181 if (al.sym != NULL) { 2182 if (perf_hpp_list.parent && !*parent && 2183 symbol__match_regex(al.sym, &parent_regex)) 2184 *parent = al.sym; 2185 else if (have_ignore_callees && root_al && 2186 symbol__match_regex(al.sym, &ignore_callees_regex)) { 2187 /* Treat this symbol as the root, 2188 forgetting its callees. */ 2189 *root_al = al; 2190 callchain_cursor_reset(cursor); 2191 } 2192 } And the al that doesn't have the ->srcline field initialized will be copied to the root_al, so then, back to: 1211 int hist_entry_iter__add(struct hist_entry_iter *iter, struct addr_location *al, 1212 int max_stack_depth, void *arg) 1213 { 1214 int err, err2; 1215 struct map *alm = NULL; 1216 1217 if (al) 1218 alm = map__get(al->map); 1219 1220 err = sample__resolve_callchain(iter->sample, &callchain_cursor, &iter->parent, 1221 iter->evsel, al, max_stack_depth); 1222 if (err) { 1223 map__put(alm); 1224 return err; 1225 } 1226 1227 err = iter->ops->prepare_entry(iter, al); 1228 if (err) 1229 goto out; 1230 1231 err = iter->ops->add_single_entry(iter, al); 1232 if (err) 1233 goto out; 1234 That al at line 1221 is what hist_entry_iter__add() (called from sample__resolve_callchain()) saw as 'root_al', and then: iter->ops->add_single_entry(iter, al); will go on with al->srcline with a bogus value, I'll add the above sequence to the cset and apply, thanks! Signed-off-by: Michael Petlan <mpetlan@redhat.com> CC: Milian Wolff <milian.wolff@kdab.com> Cc: Jiri Olsa <jolsa@redhat.com> Fixes: 1fb7d06a ("perf report Use srcline from callchain for hist entries") Link: https //lore.kernel.org/r/20210719145332.29747-1-mpetlan@redhat.com Reported-by: Juri Lelli <jlelli@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Adrian Hunter authored
set_print_ip_opts() was not being called when type != attr->type because there is not a one-to-one relationship between output types and attr->type. That resulted in ip not printing. The attr_type() function is removed, and the match of attr->type to output type is corrected. Example on ADL using taskset to select an atom cpu: # perf record -e cpu_atom/cpu-cycles/ taskset 0x1000 uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.003 MB perf.data (7 samples) ] Before: # perf script | head taskset 428 [-01] 10394.179041: 1 cpu_atom/cpu-cycles/: taskset 428 [-01] 10394.179043: 1 cpu_atom/cpu-cycles/: taskset 428 [-01] 10394.179044: 11 cpu_atom/cpu-cycles/: taskset 428 [-01] 10394.179045: 407 cpu_atom/cpu-cycles/: taskset 428 [-01] 10394.179046: 16789 cpu_atom/cpu-cycles/: taskset 428 [-01] 10394.179052: 676300 cpu_atom/cpu-cycles/: uname 428 [-01] 10394.179278: 4079859 cpu_atom/cpu-cycles/: After: # perf script | head taskset 428 10394.179041: 1 cpu_atom/cpu-cycles/: ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms]) taskset 428 10394.179043: 1 cpu_atom/cpu-cycles/: ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms]) taskset 428 10394.179044: 11 cpu_atom/cpu-cycles/: ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms]) taskset 428 10394.179045: 407 cpu_atom/cpu-cycles/: ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms]) taskset 428 10394.179046: 16789 cpu_atom/cpu-cycles/: ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms]) taskset 428 10394.179052: 676300 cpu_atom/cpu-cycles/: 7f829ef73800 cfree+0x0 (/lib/libc-2.32.so) uname 428 10394.179278: 4079859 cpu_atom/cpu-cycles/: ffffffff95bae912 vma_interval_tree_remove+0x1f2 ([kernel.kallsyms]) Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lore.kernel.org/lkml/20210911133053.15682-1-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-