- 08 Nov, 2022 30 commits
-
-
Stephen Boyd authored
Update the fingerprint node on Herobrine to match the fingerprint DT binding. This will allow us to drive the reset and boot gpios from the driver when it is re-attached after flashing. We'll also be able to boot the fingerprint processor if the BIOS isn't doing it for us. Cc: Douglas Anderson <dianders@chromium.org> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Alexandru M Stan <amstan@chromium.org> Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221107191535.624371-2-swboyd@chromium.org
-
Marijn Suijten authored
Downstream sources confirm sm6125 supports CQE, and after fixing the reg name for this range [1] this feature probes and enables correctly: [ 0.391950] sdhci_msm 4744000.mmc: mmc0: CQE init: success [1]: https://lore.kernel.org/all/20221026163646.37433-1-krzysztof.kozlowski@linaro.org/Signed-off-by:Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by:
-
Krzysztof Kozlowski authored
SM6125 comes with SDCC (SDHCI controller) v5, so the second range of registers is cqhci, not core. Fixes: cff4bbaf ("arm64: dts: qcom: Add support for SM6125") Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
-
Luca Weiss authored
The spmi-pmic bindings say that pm8941-coincell should be called 'charger'. Reviewed-by:
Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by:
Luca Weiss <luca@z3ntu.xyz> Signed-off-by:
-
Konrad Dybcio authored
Make sure all multiline C-style commends begin with just '/*' with the comment text starting on a new line. Signed-off-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by:
-
Konrad Dybcio authored
Switch '//' comments to C-style /* */. Signed-off-by:
-
Konrad Dybcio authored
Make sure all multiline C-style commends begin with just '/*' with the comment text starting on a new line. Signed-off-by:
-
Konrad Dybcio authored
Make sure all multiline C-style commends begin with just '/*' with the comment text starting on a new line. Also, trim off downstream regulator properties from comments to prevent them from accidentally landing into mainline one day.. Signed-off-by:
-
Konrad Dybcio authored
Make sure all multiline C-style commends begin with just '/*' with the comment text starting on a new line. Also, fix up some whitespace within comments. Signed-off-by:
-
Konrad Dybcio authored
Switch '//' comments to C-style /* */. Make sure all multiline C-style commends begin with just '/*' with the comment text starting on a new line. Signed-off-by:
-
Konrad Dybcio authored
Switch '//' comments to C-style /* */. Signed-off-by:
-
Konrad Dybcio authored
Switch '//' comments to C-style /* */ and fix up the contents of some. Signed-off-by:
-
Konrad Dybcio authored
Switch '//' comments to C-style /* */ and fix up the contents of some. Signed-off-by:
-
Konrad Dybcio authored
Switch '//' comments to C-style /* */ and fix up the contents of some. Make sure all multiline C-style commends begin with just '/*' with the comment text starting on a new line. Also, fix up a single raw '2' to PM8994_GPIO_S4 while at it. Signed-off-by:
-
Konrad Dybcio authored
Switch '//' comments to C-style /* */ and fix up the contents of some. Make sure all multiline C-style commends begin with just '/*' with the comment text starting on a new line. Signed-off-by:
-
Krzysztof Kozlowski authored
DT schema expects TLMM pin configuration nodes to be named with '-state' suffix and their optional children with '-pins' suffix. Signed-off-by:
-
Robert Marko authored
Use respective GPIO_ACTIVE_LOW/HIGH flags for tlmm GPIOs instead of harcoding the cell value. Signed-off-by:
Robert Marko <robimarko@gmail.com> Reviewed-by:
-
Robert Marko authored
Use respective GPIO_ACTIVE_LOW/HIGH flags for tlmm GPIOs instead of harcoding the cell value. Signed-off-by:
-
Robert Marko authored
Use "okay" instead of "ok" in USB nodes as "ok" is deprecated. Signed-off-by:
-
Konrad Dybcio authored
Use my new Linaro address in place of my SoMainline one. Signed-off-by:
Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by:
-
Johan Hovold authored
Update the USB MP QMP PHY nodes to match the new binding which specifically includes the missing register regions (e.g. PCS_USB). Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Reviewed-by:
Andrew Halaney <ahalaney@redhat.com> Signed-off-by:
-
Sheng-Liang Pan authored
arm64: dts: qcom: sc7280: sort out the "Status" to last property with sc7280-herobrine-audio-rt5682.dtsi To keep diffs clean, sort out "Status" to last property. Signed-off-by:
Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-by:
-
Sheng-Liang Pan authored
add specific 3mic setting as sc7280-herobrine-audio-rt5682-3mic.dtsi, so we can include sc7280-herobrine-audio-rt5682-3mic.dtsi for evoker as it uses rt5682 with 3 mics. Signed-off-by:
-
Sheng-Liang Pan authored
Change touchpad and touchscreen node for evoker Touchpad: SA461D-1011 Touchscreen: GT7986U Signed-off-by:
-
Sheng-Liang Pan authored
evoker have wifi/lte sku, add different dts for each sku. Signed-off-by:
-
Luca Weiss authored
Use the node name as now defined in the spmi-pmic bindings. Signed-off-by:
-
Robert Marko authored
Pass XO and sleep clocks to the GCC controller so it does not have to find them by matching globaly by name. If not passed directly, driver maintains backwards compatibility by then falling back to global lookup. Since we are here, set cell numbers in decimal instead of hex. Signed-off-by:
-
Dmitry Baryshkov authored
Link dsi1_phy as a clock provider of "dsi1pll" and "dsi1pllbyte" clocks to the MMCC. Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
-
Dmitry Baryshkov authored
Link hdmi_phy as a clock provider of "hdmipll" clock to the MMCC. Signed-off-by:
-
Marijn Suijten authored
When enabling the APPS SMMU the mainline driver reconfigures the SMMU from its bootloader configuration, losing the stream mapping for (among which) the SDHCI hardware and breaking its ADMA feature. This feature can be disabled with: sdhci.debug_quirks=0x40 But it is of course desired to have this feature enabled and working through the SMMU. Signed-off-by:Luca Weiss <luca.weiss@fairphone.com> Tested-by: Luca Weiss <luca.weiss@fairphone.com> # sm7225-fairphone-fp4 Signed-off-by:
-
- 07 Nov, 2022 10 commits
-
-
Marijn Suijten authored
Use the generic samsung,s6sy761 touchscreen driver for this device, together with a few pins and regulators to power it up correctly. Signed-off-by:
-
Marijn Suijten authored
Enable QUP and GPI DMA hardware to be able to add functioning I2C nodes later. Signed-off-by:
-
Marijn Suijten authored
Without power the SDCard slot / hardware remains dormant. Like many other platforms these regulators are used exclusively by SDHCI, and have their maximum voltage decreased to what downstream sets on the consumer side. Additionally the SDHCI driver supports setting a load, for which the regulator definition is extended much the same. Signed-off-by:
-
Marijn Suijten authored
This regulator configuration was adopted from downstream, and is identical to the sm7225 FairPhone 4 configuration bar pm6350_l8a. Signed-off-by:
-
Marijn Suijten authored
Include pm6350 to inherit its GPIO and button configuration, and configure "resin" to serve as volume up, and gpio2 as volume down. Signed-off-by:
-
Marijn Suijten authored
Make pm6350.dtsi self-contained by including input.h, needed for the KEY_POWER constant used to define the power key. Fixes: d8a3c775 ("arm64: dts: qcom: Add PM6350 PMIC") Signed-off-by:
-
Marijn Suijten authored
In addition to the sdc2 pins, set the SD Card Detect pin in a sane state to be used as an interrupt when an SD Card is slotted in or removed. Signed-off-by:
-
Marijn Suijten authored
Use the generic pin functions specifically for sdc2. Signed-off-by:
-
Marijn Suijten authored
Make sure the SDHCI hardware is properly reset before interacting with it, to protect against any possibly indeterminate state left by the bootloader. Suggested-by:
-
Luca Weiss authored
Add temp-alarm device tree node and a default configuration for the corresponding thermal zone for this PMIC. Temperatures are based on downstream values, except for trip2 where 125°C is used instead of 145°C due to limitations without a configured ADC. Signed-off-by:
-
