- 28 May, 2020 30 commits
-
-
Ricardo Cañuelo authored
This converts the Analogix ANX7814 bridge DT binding to yaml. Port definitions and descriptions were expanded, apart from that it's a direct translation from the original binding. Signed-off-by:
Ricardo Cañuelo <ricardo.canuelo@collabora.com> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by:
Rob Herring <robh@kernel.org>
-
Anson Huang authored
Convert the imx tpm pwm binding to DT schema format using json-schema. Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Signed-off-by:
-
Anson Huang authored
Convert the imx pwm binding to DT schema format using json-schema. Signed-off-by:
-
Anson Huang authored
Convert the MXC RTC V2 binding to DT schema format using json-schema. Signed-off-by:
Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by:
-
Anson Huang authored
Convert the MXC RTC binding to DT schema format using json-schema. Signed-off-by:
-
Niklas Söderlund authored
Convert Renesas R-Car Gen3 Thermal bindings documentation to json-schema. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Charles Keepax authored
Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> [robh: Drop $ref on *-supply] Signed-off-by:
-
Charles Keepax authored
Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Charles Keepax authored
Signed-off-by:
-
Charles Keepax authored
Signed-off-by:
-
Charles Keepax authored
Signed-off-by:
-
Charles Keepax authored
Acked-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
-
Charles Keepax authored
Signed-off-by:
-
Kunihiko Hayashi authored
Convert UniPhier watchdog timer binding to DT schema format. Cc: Keiji Hayashibara <hayashibara.keiji@socionext.com> Signed-off-by:
Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by:
-
Qi Zheng authored
The code is using of_dev_lookup() rather than of_devname_lookup(). Signed-off-by:
Qi Zheng <arch0.zheng@gmail.com> Signed-off-by:
-
Dan Carpenter authored
The problem in this code is that if kobject_add() fails, then it should call of_node_put(np) to drop the reference count. I've actually moved the of_node_get(np) later in the function to avoid needing to do clean up. Fixes: 5b2c2f5a ("of: overlay: add missing of_node_get() in __of_attach_node_sysfs") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Charles Keepax authored
Signed-off-by:
-
Charles Keepax authored
Signed-off-by:
-
Charles Keepax authored
Signed-off-by:
-
Charles Keepax authored
Signed-off-by:
-
Charles Keepax authored
Signed-off-by:
-
Lad Prabhakar authored
RZ/G1H (R8A7742) watchdog implementation is compatible with R-Car Gen2, therefore add relevant documentation. Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by:
Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Reviewed-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Nikita Travkin authored
Add the "awinic" vendor prefix for Shanghai Awinic Technology Co., Ltd. Website: https://www.awinic.com/Reviewed-by:
Nikita Travkin <nikitos.tr@gmail.com> Signed-off-by:
-
Anson Huang authored
Convert the i.MX6UL clock binding to DT schema format using json-schema. Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Anson Huang authored
Convert the i.MX6SLL clock binding to DT schema format using json-schema. Signed-off-by:
-
Anson Huang authored
Convert the i.MX6SL clock binding to DT schema format using json-schema. Signed-off-by:
-
Anson Huang authored
Convert the i.MX6SX clock binding to DT schema format using json-schema. Signed-off-by:
-
Anson Huang authored
Convert the i.MX6Q clock binding to DT schema format using json-schema. Signed-off-by:
-
Sandeep Maheswaram authored
Add compatible for SC7180 in usb dwc3 bindings. Signed-off-by:
Sandeep Maheswaram <sanm@codeaurora.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Acked-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
-
Sandeep Maheswaram authored
Convert USB DWC3 bindings to DT schema format using json-schema. Signed-off-by:
-
- 19 May, 2020 3 commits
-
-
Etienne Carriere authored
Introduce boolean property st,non-secure-otp for OTP data located in a factory programmed area that only secure firmware can access by default and that shall be reachable from the non-secure world. This change also allows additional properties for NVMEM nodes that were forbidden prior this change. Signed-off-by:
Etienne Carriere <etienne.carriere@st.com> Signed-off-by:
-
Geert Uytterhoeven authored
"258" is an odd power-of-two ;-) Obviously this is a typo, and the intended value is "256". Fixes: 7f3bf420 ("dt-bindings: at24: convert the binding document to yaml") Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by:
-
chenqiwu authored
Currently, there are some descriptions of function not consistent with function name, fixing them will make the code more readable. Signed-off-by:
chenqiwu <chenqiwu@xiaomi.com> Signed-off-by:
-
- 18 May, 2020 2 commits
-
-
Kangmin Park authored
This is a trivial patch to fix node id to match the reg in example. Signed-off-by:
Kangmin Park <l4stpr0gr4m@gmail.com> Signed-off-by:
-
Oleksij Rempel authored
Convert the Qualcomm Atheros AR9330 High-Speed UART Device Tree binding documentation to json-schema. Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by:
-
- 15 May, 2020 4 commits
-
-
Andre Przywara authored
A OHCI/EHCI controller could be behind an IOMMU, in which case an iommus property assigns the stream ID for this device. Allow that property in the DT bindings to fix a complaint about the Arm Juno board's DTS file. Signed-off-by:
Andre Przywara <andre.przywara@arm.com> Signed-off-by:
-
Andre Przywara authored
Add the boolean dma-coherent property to the list of allowed properties, since some boards (Arm Juno) integrate the GPU this way. Signed-off-by:
-
Andre Przywara authored
The arm,gic-400 compatible is probably the best matching string for the GIC in most modern SoCs, but was only introduced later into the kernel. For historic reasons and to keep compatibility, some SoC DTs were thus using a combination of this name and one of the older strings, which currently the binding denies. Add a stanza to the DT binding to allow "arm,gic-400", followed by either "arm,cortex-a15-gic" or "arm,cortex-a7-gic". This fixes binding compliance for quite some SoC .dtsi files in the kernel tree. Signed-off-by:
-
Yoshihiro Kaneko authored
Convert the Renesas Interrupt Controller (INTC) for external pins Device Tree binding documentation to json-schema. Signed-off-by:
Yoshihiro Kaneko <ykaneko0929@gmail.com> Co-developed-by:
-
- 14 May, 2020 1 commit
-
-
Rob Herring authored
The examples template is a 'simple-bus' with a size of 1 cell for had between 2 and 4 cells which really only errors on I2C or SPI type devices with a single cell. The easiest fix in most cases is to change the 'reg' property to for 1 cell address and size. In some cases with child devices having 2 cells, that doesn't make sense so a bus node is needed. Acked-by: Stephen Boyd <sboyd@kernel.org> # clk Reviewed-by:
-
