When a thread is OOM-killed during swap_readpage() operation, an oops
occurs because end_swap_bio_read() is calling wake_up_process() based on
an assumption that the thread which called swap_readpage() is still
alive.

  Out of memory: Kill process 525 (polkitd) score 0 or sacrifice child
  Killed process 525 (polkitd) total-vm:528128kB, anon-rss:0kB, file-rss:4kB, shmem-rss:0kB
  oom_reaper: reaped process 525 (polkitd), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB
  general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC
  Modules linked in: nf_conntrack_netbios_ns nf_conntrack_broadcast ip6t_rpfilter ipt_REJECT nf_reject_ipv4 ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_raw ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter coretemp ppdev pcspkr vmw_balloon sg shpchp vmw_vmci parport_pc parport i2c_piix4 ip_tables xfs libcrc32c sd_mod sr_mod cdrom ata_generic pata_acpi vmwgfx ahci libahci drm_kms_helper ata_piix syscopyarea sysfillrect sysimgblt fb_sys_fops mptspi scsi_transport_spi ttm e1000 mptscsih drm mptbase i2c_core libata serio_raw
  CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.13.0-rc2-next-20170725 #129
  Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/31/2013
  task: ffffffffb7c16500 task.stack: ffffffffb7c00000
  RIP: 0010:__lock_acquire+0x151/0x12f0
  Call Trace:
   <IRQ>
   lock_acquire+0x59/0x80
   _raw_spin_lock_irqsave+0x3b/0x4f
   try_to_wake_up+0x3b/0x410
   wake_up_process+0x10/0x20
   end_swap_bio_read+0x6f/0xf0
   bio_endio+0x92/0xb0
   blk_update_request+0x88/0x270
   scsi_end_request+0x32/0x1c0
   scsi_io_completion+0x209/0x680
   scsi_finish_command+0xd4/0x120
   scsi_softirq_done+0x120/0x140
   __blk_mq_complete_request_remote+0xe/0x10
   flush_smp_call_function_queue+0x51/0x120
   generic_smp_call_function_single_interrupt+0xe/0x20
   smp_trace_call_function_single_interrupt+0x22/0x30
   smp_call_function_single_interrupt+0x9/0x10
   call_function_single_interrupt+0xa7/0xb0
   </IRQ>
  RIP: 0010:native_safe_halt+0x6/0x10
   default_idle+0xe/0x20
   arch_cpu_idle+0xa/0x10
   default_idle_call+0x1e/0x30
   do_idle+0x187/0x200
   cpu_startup_entry+0x6e/0x70
   rest_init+0xd0/0xe0
   start_kernel+0x456/0x477
   x86_64_start_reservations+0x24/0x26
   x86_64_start_kernel+0xf7/0x11a
   secondary_startup_64+0xa5/0xa5
  Code: c3 49 81 3f 20 9e 0b b8 41 bc 00 00 00 00 44 0f 45 e2 83 fe 01 0f 87 62 ff ff ff 89 f0 49 8b 44 c7 08 48 85 c0 0f 84 52 ff ff ff <f0> ff 80 98 01 00 00 8b 3d 5a 49 c4 01 45 8b b3 18 0c 00 00 85
  RIP: __lock_acquire+0x151/0x12f0 RSP: ffffa01f39e03c50
  ---[ end trace 6c441db499169b1e ]---
  Kernel panic - not syncing: Fatal exception in interrupt
  Kernel Offset: 0x36000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
  ---[ end Kernel panic - not syncing: Fatal exception in interrupt

Fix it by holding a reference to the thread.

[akpm@linux-foundation.org: add comment]
Fixes: 23955622 ("swap: add block io poll in swapin path")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Shaohua Li <shli@fb.com>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Mike reported kernel goes oops with ltp:zram03 testcase.

  zram: Added device: zram0
  zram0: detected capacity change from 0 to 107374182400
  BUG: unable to handle kernel paging request at 0000306d61727a77
  IP: zs_map_object+0xb9/0x260
  PGD 0
  P4D 0
  Oops: 0000 [#1] SMP
  Dumping ftrace buffer:
     (ftrace buffer empty)
  Modules linked in: zram(E) xfs(E) libcrc32c(E) btrfs(E) xor(E) raid6_pq(E) loop(E) ebtable_filter(E) ebtables(E) ip6table_filter(E) ip6_tables(E) iptable_filter(E) ip_tables(E) x_tables(E) af_packet(E) br_netfilter(E) bridge(E) stp(E) llc(E) iscsi_ibft(E) iscsi_boot_sysfs(E) nls_iso8859_1(E) nls_cp437(E) vfat(E) fat(E) intel_powerclamp(E) coretemp(E) cdc_ether(E) kvm_intel(E) usbnet(E) mii(E) kvm(E) irqbypass(E) crct10dif_pclmul(E) crc32_pclmul(E) crc32c_intel(E) iTCO_wdt(E) ghash_clmulni_intel(E) bnx2(E) iTCO_vendor_support(E) pcbc(E) ioatdma(E) ipmi_ssif(E) aesni_intel(E) i5500_temp(E) i2c_i801(E) aes_x86_64(E) lpc_ich(E) shpchp(E) mfd_core(E) crypto_simd(E) i7core_edac(E) dca(E) glue_helper(E) cryptd(E) ipmi_si(E) button(E) acpi_cpufreq(E) ipmi_devintf(E) pcspkr(E) ipmi_msghandler(E)
   nfsd(E) auth_rpcgss(E) nfs_acl(E) lockd(E) grace(E) sunrpc(E) ext4(E) crc16(E) mbcache(E) jbd2(E) sd_mod(E) ata_generic(E) i2c_algo_bit(E) ata_piix(E) drm_kms_helper(E) ahci(E) syscopyarea(E) sysfillrect(E) libahci(E) sysimgblt(E) fb_sys_fops(E) uhci_hcd(E) ehci_pci(E) ttm(E) ehci_hcd(E) libata(E) drm(E) megaraid_sas(E) usbcore(E) sg(E) dm_multipath(E) dm_mod(E) scsi_dh_rdac(E) scsi_dh_emc(E) scsi_dh_alua(E) scsi_mod(E) efivarfs(E) autofs4(E) [last unloaded: zram]
  CPU: 6 PID: 12356 Comm: swapon Tainted: G            E   4.13.0.g87b2c3fc-default #194
  Hardware name: IBM System x3550 M3 -[7944K3G]-/69Y5698     , BIOS -[D6E150AUS-1.10]- 12/15/2010
  task: ffff880158d2c4c0 task.stack: ffffc90001680000
  RIP: 0010:zs_map_object+0xb9/0x260
  Call Trace:
   zram_bvec_rw.isra.26+0xe8/0x780 [zram]
   zram_rw_page+0x6e/0xa0 [zram]
   bdev_read_page+0x81/0xb0
   do_mpage_readpage+0x51a/0x710
   mpage_readpages+0x122/0x1a0
   blkdev_readpages+0x1d/0x20
   __do_page_cache_readahead+0x1b2/0x270
   ondemand_readahead+0x180/0x2c0
   page_cache_sync_readahead+0x31/0x50
   generic_file_read_iter+0x7e7/0xaf0
   blkdev_read_iter+0x37/0x40
   __vfs_read+0xce/0x140
   vfs_read+0x9e/0x150
   SyS_read+0x46/0xa0
   entry_SYSCALL_64_fastpath+0x1a/0xa5
  Code: 81 e6 00 c0 3f 00 81 fe 00 00 16 00 0f 85 9f 01 00 00 0f b7 13 65 ff 05 5e 07 dc 7e 66 c1 ea 02 81 e2 ff 01 00 00 49 8b 54 d4 08 <8b> 4a 48 41 0f af ce 81 e1 ff 0f 00 00 41 89 c9 48 c7 c3 a0 70
  RIP: zs_map_object+0xb9/0x260 RSP: ffffc90001683988
  CR2: 0000306d61727a77

He bisected the problem is [1].

After commit cf8e0fed ("mm/zsmalloc: simplify zs_max_alloc_size
handling"), zram doesn't use double pointer for pool->size_class any
more in zs_create_pool so counter function zs_destroy_pool don't need to
free it, either.

Otherwise, it does kfree wrong address and then, kernel goes Oops.

Link: http://lkml.kernel.org/r/20170725062650.GA12134@bbox
Fixes: cf8e0fed ("mm/zsmalloc: simplify zs_max_alloc_size handling")
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reported-by: Mike Galbraith <efault@gmx.de>
Tested-by: Mike Galbraith <efault@gmx.de>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The kerneldoc comment for kthread_create() had an incorrect argument
name, leading to a warning in the docs build.

Correct it, and make one more small step toward a warning-free build.

Link: http://lkml.kernel.org/r/20170724135916.7f486c6f@lwn.netSigned-off-by: Jonathan Corbet <corbet@lwn.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gcc-7 produces this warning:

  mm/kasan/report.c: In function 'kasan_report':
  mm/kasan/report.c:351:3: error: 'info.first_bad_addr' may be used uninitialized in this function [-Werror=maybe-uninitialized]
     print_shadow_for_address(info->first_bad_addr);
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  mm/kasan/report.c:360:27: note: 'info.first_bad_addr' was declared here

The code seems fine as we only print info.first_bad_addr when there is a
shadow, and we always initialize it in that case, but this is relatively
hard for gcc to figure out after the latest rework.

Adding an intialization to the most likely value together with the other
struct members shuts up that warning.

Fixes: b235b9808664 ("kasan: unify report headers")
Link: https://patchwork.kernel.org/patch/9641417/
Link: http://lkml.kernel.org/r/20170725152739.4176967-1-arnd@arndb.deSigned-off-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Alexander Potapenko <glider@google.com>
Suggested-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When mremap is called with MREMAP_FIXED it unmaps memory at the
destination address without notifying userfaultfd monitor.

If the destination were registered with userfaultfd, the monitor has no
way to distinguish between the old and new ranges and to properly relate
the page faults that would occur in the destination region.

Fixes: 897ab3e0 ("userfaultfd: non-cooperative: add event for memory unmaps")
Link: http://lkml.kernel.org/r/1500276876-3350-1-git-send-email-rppt@linux.vnet.ibm.comSigned-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Acked-by: Pavel Emelyanov <xemul@virtuozzo.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Nadav Amit identified a theoritical race between page reclaim and
mprotect due to TLB flushes being batched outside of the PTL being held.

He described the race as follows:

        CPU0                            CPU1
        ----                            ----
                                        user accesses memory using RW PTE
                                        [PTE now cached in TLB]
        try_to_unmap_one()
        ==> ptep_get_and_clear()
        ==> set_tlb_ubc_flush_pending()
                                        mprotect(addr, PROT_READ)
                                        ==> change_pte_range()
                                        ==> [ PTE non-present - no flush ]

                                        user writes using cached RW PTE
        ...

        try_to_unmap_flush()

The same type of race exists for reads when protecting for PROT_NONE and
also exists for operations that can leave an old TLB entry behind such
as munmap, mremap and madvise.

For some operations like mprotect, it's not necessarily a data integrity
issue but it is a correctness issue as there is a window where an
mprotect that limits access still allows access.  For munmap, it's
potentially a data integrity issue although the race is massive as an
munmap, mmap and return to userspace must all complete between the
window when reclaim drops the PTL and flushes the TLB.  However, it's
theoritically possible so handle this issue by flushing the mm if
reclaim is potentially currently batching TLB flushes.

Other instances where a flush is required for a present pte should be ok
as either the page lock is held preventing parallel reclaim or a page
reference count is elevated preventing a parallel free leading to
corruption.  In the case of page_mkclean there isn't an obvious path
that userspace could take advantage of without using the operations that
are guarded by this patch.  Other users such as gup as a race with
reclaim looks just at PTEs.  huge page variants should be ok as they
don't race with reclaim.  mincore only looks at PTEs.  userfault also
should be ok as if a parallel reclaim takes place, it will either fault
the page back in or read some of the data before the flush occurs
triggering a fault.

Note that a variant of this patch was acked by Andy Lutomirski but this
was for the x86 parts on top of his PCID work which didn't make the 4.13
merge window as expected.  His ack is dropped from this version and
there will be a follow-on patch on top of PCID that will include his
ack.

[akpm@linux-foundation.org: tweak comments]
[akpm@linux-foundation.org: fix spello]
Link: http://lkml.kernel.org/r/20170717155523.emckq2esjro6hf3z@suse.deReported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: <stable@vger.kernel.org>	[v4.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

After commit 3d375d78 ("mm: update callers to use HASH_ZERO flag"),
drop unused pidhash_size in pidhash_init().

Link: http://lkml.kernel.org/r/1500389267-49222-1-git-send-email-wangkefeng.wang@huawei.comSigned-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Pavel Tatashin <Pasha.Tatashin@Oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 9a291a7c ("mm/hugetlb: report -EHWPOISON not -EFAULT when
FOLL_HWPOISON is specified") causes __get_user_pages to ignore certain
errors from follow_hugetlb_page.  After such error, __get_user_pages
subsequently calls faultin_page on the same VMA and start address that
follow_hugetlb_page failed on instead of returning the error immediately
as it should.

In follow_hugetlb_page, when hugetlb_fault returns a value covered under
VM_FAULT_ERROR, follow_hugetlb_page returns it without setting nr_pages
to 0 as __get_user_pages expects in this case, which causes the
following to happen in __get_user_pages: the "while (nr_pages)" check
succeeds, we skip the "if (!vma..." check because we got a VMA the last
time around, we find no page with follow_page_mask, and we call
faultin_page, which calls hugetlb_fault for the second time.

This issue also slightly changes how __get_user_pages works.  Before, it
only returned error if it had made no progress (i = 0).  But now,
follow_hugetlb_page can clobber "i" with an error code since its new
return path doesn't check for progress.  So if "i" is nonzero before a
failing call to follow_hugetlb_page, that indication of progress is lost
and __get_user_pages can return error even if some pages were
successfully pinned.

To fix this, change follow_hugetlb_page so that it updates nr_pages,
allowing __get_user_pages to fail immediately and restoring the "error
only if no progress" behavior to __get_user_pages.

Tested that __get_user_pages returns when expected on error from
hugetlb_fault in follow_hugetlb_page.

Fixes: 9a291a7c ("mm/hugetlb: report -EHWPOISON not -EFAULT when FOLL_HWPOISON is specified")
Link: http://lkml.kernel.org/r/1500406795-58462-1-git-send-email-daniel.m.jordan@oracle.comSigned-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Acked-by: Punit Agrawal <punit.agrawal@arm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: James Morse <james.morse@arm.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: zhong jiang <zhongjiang@huawei.com>
Cc: <stable@vger.kernel.org>	[4.12.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull x86 platform driver fixes from Darren Hart:
 "Fix two bugs under error or abnormal usage conditions. Correct a
  config dependency:

  dell-wmi:
   - Fix driver interface version query

  wmi:
   - Fix error handling in acpi_wmi_init()

  peaq-wmi:
   - select INPUT_POLLDEV"

* tag 'platform-drivers-x86-v4.13-3' of git://git.infradead.org/linux-platform-drivers-x86:
  platform/x86: dell-wmi: Fix driver interface version query
  platform/x86: wmi: Fix error handling in acpi_wmi_init()
  platform/x86: peaq-wmi: select INPUT_POLLDEV

Pull SCSI fixes from James Bottomley:
 "These seven patches are mostly minor build, Kconfig and error leg
  fixes"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qedi: Fix return code in qedi_ep_connect()
  scsi: lpfc: fix linking against modular NVMe support
  scsi: scsi_transport_fc: return -EBUSY for deleted vport
  scsi: libcxgbi: add check for valid cxgbi_task_data
  scsi: aic7xxx: fix firmware build with O=path
  scsi: megaraid_sas: fix memleak in megasas_alloc_cmdlist_fusion
  scsi: qedi: Add ISCSI_BOOT_SYSFS to Kconfig

When I converted dell-wmi to the new bus infrastructure, I left the
call to dell_wmi_check_descriptor_buffer() in dell_wmi_init().  This
could cause two problems:

 - An error message when loading the driver on a system without
   dell-wmi.  We'd try to read the event descriptor even if the WMI
   GUID wasn't there.

 - A possible race if dell-wmi was loaded manually before wmi was
   fully initialized.

Fix it by moving the call to the probe function where it belongs.

Fixes: bff589be ("platform/x86: dell-wmi: Convert to the WMI bus infrastructure")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Pull parsic fixes from Helge Deller:

 - Our cache flushing code ran into a BUG in case context is not
   current. Fix it by flushing the whole cache in such rare situations
   (by Dave Anglin).

 - Fix a "sleeping function called from invalid context BUG" in our
   pdc_stable driver by rearranging our locks (by James Bottomley)

 - The thread and irq stacks require more than 16 KB since kernel 4.11.
   Increase both to 32 KB.

 - Define CONFIG_CPU_BIG_ENDIAN unconditionally on parisc to avoid wrong
   behaviour in qrwlock functions (by Babu Moger).

* 'parisc-4.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Define CONFIG_CPU_BIG_ENDIAN
  parisc: pdc_stable: Fix locking when creating sysfs links
  parisc: Increase thread and stack size to 32kb
  parisc: Handle vma's whose context is not current in flush_cache_range

Pull networking fixes from David Miller:

 1) Handle notifier registry failures properly in tun/tap driver, from
    Tonghao Zhang.

 2) Fix bpf verifier handling of subtraction bounds and add a testcase
    for this, from Edward Cree.

 3) Increase reset timeout in ftgmac100 driver, from Ben Herrenschmidt.

 4) Fix use after free in prd_retire_rx_blk_timer_exired() in AF_PACKET,
    from Cong Wang.

 5) Fix SElinux regression due to recent UDP optimizations, from Paolo
    Abeni.

 6) We accidently increment IPSTATS_MIB_FRAGFAILS in the ipv6 code
    paths, fix from Stefano Brivio.

 7) Fix some mem leaks in dccp, from Xin Long.

 8) Adjust MDIO_BUS kconfig deps to avoid build errors, from Arnd
    Bergmann.

 9) Mac address length check and buffer size fixes from Cong Wang.

10) Don't leak sockets in ipv6 udp early demux, from Paolo Abeni.

11) Fix return value when copy_from_user() fails in
    bpf_prog_get_info_by_fd(), from Daniel Borkmann.

12) Handle PHY_HALTED properly in phy library state machine, from
    Florian Fainelli.

13) Fix OOPS in fib_sync_down_dev(), from Ido Schimmel.

14) Fix truesize calculation in virtio_net which led to performance
    regressions, from Michael S Tsirkin.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits)
  samples/bpf: fix bpf tunnel cleanup
  udp6: fix jumbogram reception
  ppp: Fix a scheduling-while-atomic bug in del_chan
  Revert "net: bcmgenet: Remove init parameter from bcmgenet_mii_config"
  virtio_net: fix truesize for mergeable buffers
  mv643xx_eth: fix of_irq_to_resource() error check
  MAINTAINERS: Add more files to the PHY LIBRARY section
  ipv4: fib: Fix NULL pointer deref during fib_sync_down_dev()
  net: phy: Correctly process PHY_HALTED in phy_stop_machine()
  sunhme: fix up GREG_STAT and GREG_IMASK register offsets
  bpf: fix bpf_prog_get_info_by_fd to dump correct xlated_prog_len
  tcp: avoid bogus gcc-7 array-bounds warning
  net: tc35815: fix spelling mistake: "Intterrupt" -> "Interrupt"
  bpf: don't indicate success when copy_from_user fails
  udp6: fix socket leak on early demux
  net: thunderx: Fix BGX transmit stall due to underflow
  Revert "vhost: cache used event for better performance"
  team: use a larger struct for mac address
  net: check dev->addr_len for dev_set_mac_address()
  phy: bcm-ns-usb3: fix MDIO_BUS dependency
  ...

test_tunnel_bpf.sh fails to remove the vxlan11 tunnel device, causing the
next geneve tunnelling test case fails.  In addition, the geneve reserved bit
in tcbpf2_kern.c should be zero, according to the RFC.
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit 67a51780 ("ipv6: udp: leverage scratch area
helpers") udp6_recvmsg() read the skb len from the scratch area,
to avoid a cache miss.
But the UDP6 rx path support RFC 2675 UDPv6 jumbograms, and their
length exceeds the 16 bits available in the scratch area. As a side
effect the length returned by recvmsg() is:
<ingress datagram len> % (1<<16)

This commit addresses the issue allocating one more bit in the
IP6CB flags field and setting it for incoming jumbograms.
Such field is still in the first cacheline, so at recvmsg()
time we can check it and fallback to access skb->len if
required, without a measurable overhead.

Fixes: 67a51780 ("ipv6: udp: leverage scratch area helpers")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The PPTP set the pptp_sock_destruct as the sock's sk_destruct, it would
trigger this bug when __sk_free is invoked in atomic context, because of
the call path pptp_sock_destruct->del_chan->synchronize_rcu.

Now move the synchronize_rcu to pptp_release from del_chan. This is the
only one case which would free the sock and need the synchronize_rcu.

The following is the panic I met with kernel 3.3.8, but this issue should
exist in current kernel too according to the codes.

BUG: scheduling while atomic
__schedule_bug+0x5e/0x64
__schedule+0x55/0x580
? ppp_unregister_channel+0x1cd5/0x1de0 [ppp_generic]
? dev_hard_start_xmit+0x423/0x530
? sch_direct_xmit+0x73/0x170
__cond_resched+0x16/0x30
_cond_resched+0x22/0x30
wait_for_common+0x18/0x110
? call_rcu_bh+0x10/0x10
wait_for_completion+0x12/0x20
wait_rcu_gp+0x34/0x40
? wait_rcu_gp+0x40/0x40
synchronize_sched+0x1e/0x20
0xf8417298
0xf8417484
? sock_queue_rcv_skb+0x109/0x130
__sk_free+0x16/0x110
? udp_queue_rcv_skb+0x1f2/0x290
sk_free+0x16/0x20
__udp4_lib_rcv+0x3b8/0x650
Signed-off-by: Gao Feng <gfree.wind@vip.163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 28b45910 ("net: bcmgenet: Remove init parameter
from bcmgenet_mii_config") because in the process of moving from
dev_info() to dev_info_once() we essentially lost the helpful printed
messages once the second instance of the driver is loaded.
dev_info_once() does not actually print the message once per device
instance, but once period.

Fixes: 28b45910 ("net: bcmgenet: Remove init parameter from bcmgenet_mii_config")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Seth Forshee noticed a performance degradation with some workloads.
This turns out to be due to packet drops.  Euan Kemp noticed that this
is because we drop all packets where length exceeds the truesize, but
for some packets we add in extra memory without updating the truesize.
This in turn was kept around unchanged from ab7db917 ("virtio-net:
auto-tune mergeable rx buffer size for improved performance").  That
commit had an internal reason not to account for the extra space: not
enough bits to do it.  No longer true so let's account for the allocated
length exactly.

Many thanks to Seth Forshee for the report and bisecting and Euan Kemp
for debugging the issue.

Fixes: 680557cf ("virtio_net: rework mergeable buffer handling")
Reported-by: Euan Kemp <euan.kemp@coreos.com>
Tested-by: Euan Kemp <euan.kemp@coreos.com>
Reported-by: Seth Forshee <seth.forshee@canonical.com>
Tested-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

of_irq_to_resource() has recently been  fixed to return negative error #'s
along with 0 in case of failure,  however the Marvell MV643xx Ethernet
driver still only regards 0  as invalid IRQ -- fix it up.

Fixes: 7a4228bb ("of: irq: use of_irq_get() in of_irq_to_resource()")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Include missing files that are provided by, used, or directly maintained
within the PHY LIBRARY, this include uapi header, header files used by
Device Tree code etc.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michał reported a NULL pointer deref during fib_sync_down_dev() when
unregistering a netdevice. The problem is that we don't check for
'in_dev' being NULL, which can happen in very specific cases.

Usually routes are flushed upon NETDEV_DOWN sent in either the netdev or
the inetaddr notification chains. However, if an interface isn't
configured with any IP address, then it's possible for host routes to be
flushed following NETDEV_UNREGISTER, after NULLing dev->ip_ptr in
inetdev_destroy().

To reproduce:
$ ip link add type dummy
$ ip route add local 1.1.1.0/24 dev dummy0
$ ip link del dev dummy0

Fix this by checking for the presence of 'in_dev' before referencing it.

Fixes: 982acb97 ("ipv4: fib: Notify about nexthop status changes")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

Marc reported that he was not getting the PHY library adjust_link()
callback function to run when calling phy_stop() + phy_disconnect()
which does not indeed happen because we set the state machine to
PHY_HALTED but we don't get to run it to process this state past that
point.

Fix this with a synchronous call to phy_state_machine() in order to have
the state machine actually act on PHY_HALTED, set the PHY device's link
down, turn the network device's carrier off and finally call the
adjust_link() function.
Reported-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Fixes: a390d1f3 ("phylib: convert state_queue work to delayed_work")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update the values to match those from the STP2002QFP documentation.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull cgroup fixes from Tejun Heo:
 "Several cgroup bug fixes.

   - cgroup core was calling a migration callback on empty migrations,
     which could make cpuset crash.

   - There was a very subtle bug where the controller interface files
     aren't created directly when cgroup2 is mounted. Because later
     operations create them, this bug didn't get noticed earlier.

   - Failed writes to cgroup.subtree_control were incorrectly returning
     zero"

* 'for-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: fix error return value from cgroup_subtree_control()
  cgroup: create dfl_root files on subsys registration
  cgroup: don't call migration methods if there are no tasks to migrate

Pull workqueue fixes from Tejun Heo:
 "Two notable fixes.

   - While adding NUMA affinity support to unbound workqueues, the
     assumption that an unbound workqueue with max_active == 1 is
     ordered was broken.

     The plan was to use explicit alloc_ordered_workqueue() for those
     cases. Unfortunately, I forgot to update the documentation properly
     and we grew a handful of use cases which depend on that assumption.

     While we want to convert them to alloc_ordered_workqueue(), we
     don't really lose anything by enforcing ordered execution on
     unbound max_active == 1 workqueues and it doesn't make sense to
     risk subtle bugs. Restore the assumption.

   - Workqueue assumes that CPU <-> NUMA node mapping remains static.

     This is a general assumption - we don't have any synchronization
     mechanism around CPU <-> node mapping. Unfortunately, powerpc may
     change the mapping dynamically leading to crashes. Michael added a
     workaround so that we at least don't crash while powerpc hotplug
     code gets updated"

* 'for-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Work around edge cases for calc of pool's cpumask
  workqueue: implicit ordered attribute should be overridable
  workqueue: restore WQ_UNBOUND/max_active==1 to be ordered

Pull libata fixes from Tejun Heo:
 "Dan found a really old bug where libata hotplug code wasn't sanitizing
  index value from userland and may end up indexing with a negative
  number. It is scary but fortunately can only be triggered by root.

  Other than that, minor fixes"

* 'for-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  libata: fix a couple of doc build warnings
  libata: array underflow in ata_find_dev()
  ata: sata_rcar: add gen[23] fallback compatibility strings
  libata: remove unused rc in ata_eh_handle_port_resume
  libata: Cleanup ata_read_log_page()
  ata: fix gemini Kconfig dependencies

While working on enabling queued rwlock on SPARC, found this following
code in include/asm-generic/qrwlock.h which uses CONFIG_CPU_BIG_ENDIAN
to clear a byte.

static inline u8 *__qrwlock_write_byte(struct qrwlock *lock)
 {
	return (u8 *)lock + 3 * IS_BUILTIN(CONFIG_CPU_BIG_ENDIAN);
 }

Problem is many of the fixed big endian architectures don't define
CPU_BIG_ENDIAN and clears the wrong byte.

Define CPU_BIG_ENDIAN for parisc architecture to fix it.
Signed-off-by: Babu Moger <babu.moger@oracle.com>
Signed-off-by: Helge Deller <deller@gmx.de>

The kerneldoc comments for a couple of functions in drivers/ata/libata-eh.c
had fallen behind the current implementation, resulting in these doc build
warnings:

  ./drivers/ata/libata-eh.c:1449: warning: No description found for parameter 'link'
  ./drivers/ata/libata-eh.c:1449: warning: Excess function parameter 'ap' description in 'ata_eh_done'
  ./drivers/ata/libata-eh.c:1590: warning: No description found for parameter 'qc'
  ./drivers/ata/libata-eh.c:1590: warning: Excess function parameter 'dev' description in 'ata_eh_request_sense'

Update the comments and make the warnings go away.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Tejun Heo <tj@kernel.org>

There's no need to take the write lock when creating sysfs links.

This patch fixes the following BUG:
 BUG: sleeping function called from invalid context at mm/slab.h:416
 in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: swapper/0
 CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.13.0-rc2-00110-g0b5477d9 #111
 Backtrace:
 [<0000000040217ac8>] show_stack+0x20/0x38
 [<00000000406fbbb0>] dump_stack+0xb0/0x128
 [<0000000040274090>] ___might_sleep+0x180/0x1b8
 [<0000000040274144>] __might_sleep+0x7c/0xe8
 [<0000000040373874>] kmem_cache_alloc+0x14c/0x1e0
 [<0000000040419514>] __kernfs_new_node+0x84/0x1b8
 [<000000004041b09c>] kernfs_new_node+0x3c/0x78
 [<000000004041e040>] kernfs_create_link+0x40/0xd8
 [<000000004041f320>] sysfs_do_create_link_sd.isra.0+0xb0/0x130
 [<000000004041f3d4>] sysfs_create_link+0x34/0x58
 [<000000004011b4a4>] pdc_stable_init+0x2c4/0x458
 [<0000000040200250>] do_one_initcall+0x70/0x1d8
 [<0000000040101644>] kernel_init_freeable+0x27c/0x390
 [<000000004020be44>] kernel_init+0x24/0x1c0
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Helge Deller <deller@gmx.de>

Since kernel 4.11 the thread and irq stacks on parisc randomly overflow
the default size of 16k. The reason why stack usage suddenly grew is yet
unknown.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # 4.11+
Signed-off-by: Helge Deller <deller@gmx.de>

In testing James' patch to drivers/parisc/pdc_stable.c, I hit the BUG
statement in flush_cache_range() during a system shutdown:

kernel BUG at arch/parisc/kernel/cache.c:595!
CPU: 2 PID: 6532 Comm: kworker/2:0 Not tainted 4.13.0-rc2+ #1
Workqueue: events free_ioctx

 IAOQ[0]: flush_cache_range+0x144/0x148
 IAOQ[1]: flush_cache_page+0x0/0x1a8
 RP(r2): flush_cache_range+0xec/0x148
Backtrace:
 [<00000000402910ac>] unmap_page_range+0x84/0x880
 [<00000000402918f4>] unmap_single_vma+0x4c/0x60
 [<0000000040291a18>] zap_page_range_single+0x110/0x160
 [<0000000040291c34>] unmap_mapping_range+0x174/0x1a8
 [<000000004026ccd8>] truncate_pagecache+0x50/0xa8
 [<000000004026cd84>] truncate_setsize+0x54/0x70
 [<000000004033d534>] put_aio_ring_file+0x44/0xb0
 [<000000004033d5d8>] aio_free_ring+0x38/0x140
 [<000000004033d714>] free_ioctx+0x34/0xa8
 [<00000000401b0028>] process_one_work+0x1b8/0x4d0
 [<00000000401b04f4>] worker_thread+0x1b4/0x648
 [<00000000401b9128>] kthread+0x1b0/0x208
 [<0000000040150020>] end_fault_vector+0x20/0x28
 [<0000000040639518>] nf_ip_reroute+0x50/0xa8
 [<0000000040638ed0>] nf_ip_route+0x10/0x78
 [<0000000040638c90>] xfrm4_mode_tunnel_input+0x180/0x1f8

CPU: 2 PID: 6532 Comm: kworker/2:0 Not tainted 4.13.0-rc2+ #1
Workqueue: events free_ioctx
Backtrace:
 [<0000000040163bf0>] show_stack+0x20/0x38
 [<0000000040688480>] dump_stack+0xa8/0x120
 [<0000000040163dc4>] die_if_kernel+0x19c/0x2b0
 [<0000000040164d0c>] handle_interruption+0xa24/0xa48

This patch modifies flush_cache_range() to handle non current contexts.
In as much as this occurs infrequently, the simplest approach is to
flush the entire cache when this happens.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # 4.9+
Signed-off-by: Helge Deller <deller@gmx.de>

Pull x86 fixes from Thomas Gleixner:
 "A small set of x86 fixes:

   - prevent the kernel from using the EFI reboot method when EFI is
     disabled.

   - two patches addressing clang issues"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Disable the address-of-packed-member compiler warning
  x86/efi: Fix reboot_mode when EFI runtime services are disabled
  x86/boot: #undef memcpy() et al in string.c

Pull scheduler fixes from Thomas Gleixner:
 "Two patches addressing build warnings caused by inconsistent kernel
  doc comments"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/wait: Clean up some documentation warnings
  sched/core: Fix some documentation build warnings

Pull perf fixes from Thomas Gleixner:
 "A couple of fixes for performance counters and kprobes:

   - a series of small patches which make the uncore performance
     counters on Skylake server systems work correctly

   - add a missing instruction slot release to the failure path of
     kprobes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  kprobes/x86: Release insn_slot in failure path
  perf/x86/intel/uncore: Fix missing marker for skx_uncore_cha_extra_regs
  perf/x86/intel/uncore: Fix SKX CHA event extra regs
  perf/x86/intel/uncore: Remove invalid Skylake server CHA filter field
  perf/x86/intel/uncore: Fix Skylake server CHA LLC_LOOKUP event umask
  perf/x86/intel/uncore: Fix Skylake server PCU PMU event format
  perf/x86/intel/uncore: Fix Skylake UPI PMU event masks

Pull irq fix from Thomas Gleixner:
 "Fix for a regression caused by the conversion of x86 to the generic
  hotplug code.

  Instead of doing a plain single line revert, this adds a pile of
  comments so the semantics of the force argument are clear"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq/cpuhotplug: Revert "Set force affinity flag on hotplug migration"

bpf_prog_size(prog->len) is not the correct length we want to dump
back to user space. The code in bpf_prog_get_info_by_fd() uses this
to copy prog->insnsi to user space, but bpf_prog_size(prog->len) also
includes the size of struct bpf_prog itself plus program instructions
and is usually used either in context of accounting or for bpf_prog_alloc()
et al, thus we copy out of bounds in bpf_prog_get_info_by_fd()
potentially. Use the correct bpf_prog_insn_size() instead.

Fixes: 1e270976 ("bpf: Add BPF_OBJ_GET_INFO_BY_FD")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When using CONFIG_UBSAN_SANITIZE_ALL, the TCP code produces a
false-positive warning:

net/ipv4/tcp_output.c: In function 'tcp_connect':
net/ipv4/tcp_output.c:2207:40: error: array subscript is below array bounds [-Werror=array-bounds]
   tp->chrono_stat[tp->chrono_type - 1] += now - tp->chrono_start;
                                        ^~
net/ipv4/tcp_output.c:2207:40: error: array subscript is below array bounds [-Werror=array-bounds]
   tp->chrono_stat[tp->chrono_type - 1] += now - tp->chrono_start;
   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~

I have opened a gcc bug for this, but distros have already shipped
compilers with this problem, and it's not clear yet whether there is
a way for gcc to avoid the warning. As the problem is related to the
bitfield access, this introduces a temporary variable to store the old
enum value.

I did not notice this warning earlier, since UBSAN is disabled when
building with COMPILE_TEST, and that was always turned on in both
allmodconfig and randconfig tests.

Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81601Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-for-davem-2017-07-28' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for 4.13

Two fixes for for brcmfmac, the crash was reported by two people
already so it's a high priority fix.

brcmfmac

* fix a crash in skb headroom handling in v4.13-rc1
* fix a memory leak due to a merge error in v4.6
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Trivial fix to spelling mistake in printk message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>