- 12 Mar, 2017 13 commits
-
-
Guennadi Liakhovetski authored
commit 17c341ec upstream. Don't mix up UVC_BUF_STATE_* and VB2_BUF_STATE_* codes. Fixes: 6998b6fb ("[media] uvcvideo: Use videobuf2-vmalloc") Signed-off-by:
Guennadi Liakhovetski <guennadi.liakhovetski@intel.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nicolas Iooss authored
commit 6ebf7577 upstream. In vpfe_s_fmt(), when the sensor format and the requested format were the same, bpp was assigned to vpfe->bpp without being initialized first. Grab the bpp value that is currently used by using __vpfe_get_format() instead of its wrapper, vpfe_try_fmt(). This use of uninitialized variable has been found by compiling the kernel with clang. Fixes: 417d2e50 ("[media] media: platform: add VPFE capture driver support for AM437X") Signed-off-by:
Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Paul Burton authored
commit 096a0de4 upstream. is_jump_ins() checks for plain jump ("j") instructions since commit e7438c4b ("MIPS: Fix sibling call handling in get_frame_info") but that commit didn't make the same change to the microMIPS code, leaving it inconsistent with the MIPS32/MIPS64 code. Handle the microMIPS encoding of the jump instruction too such that it behaves consistently. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Fixes: e7438c4b ("MIPS: Fix sibling call handling in get_frame_info") Cc: Tony Wu <tung7970@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14533/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Paul Burton authored
commit bb9bc468 upstream. get_frame_info() calculates the offset of the return address within a stack frame simply by dividing a the bottom 16 bits of the instruction, treated as a signed integer, by the size of a long. Whilst this works for MIPS32 & MIPS64 ISAs where the sw or sd instructions are used, it's incorrect for microMIPS where encodings differ. The result is that we typically completely fail to unwind the stack on microMIPS. Fix this by adjusting is_ra_save_ins() to calculate the return address offset, and take into account the various different encodings there in the same place as we consider whether an instruction is storing the ra/$31 register. With this we are now able to unwind the stack for kernels targetting the microMIPS ISA, for example we can produce: Call Trace: [<80109e1f>] show_stack+0x63/0x7c [<8011ea17>] __warn+0x9b/0xac [<8011ea45>] warn_slowpath_fmt+0x1d/0x20 [<8013fe53>] register_console+0x43/0x314 [<8067c58d>] of_setup_earlycon+0x1dd/0x1ec [<8067f63f>] early_init_dt_scan_chosen_stdout+0xe7/0xf8 [<8066c115>] do_early_param+0x75/0xac [<801302f9>] parse_args+0x1dd/0x308 [<8066c459>] parse_early_options+0x25/0x28 [<8066c48b>] parse_early_param+0x2f/0x38 [<8066e8cf>] setup_arch+0x113/0x488 [<8066c4f3>] start_kernel+0x57/0x328 ---[ end trace 0000000000000000 ]--- Whereas previously we only produced: Call Trace: [<80109e1f>] show_stack+0x63/0x7c ---[ end trace 0000000000000000 ]--- Signed-off-by:
-
Paul Burton authored
commit 67c75057 upstream. is_jump_ins() checks 16b instruction fields without verifying that the instruction is indeed 16b, as is done by is_ra_save_ins() & is_sp_move_ins(). Add the appropriate check. Signed-off-by:
-
Paul Burton authored
commit b6c7a324 upstream. get_frame_info() is meant to iterate over up to the first 128 instructions within a function, but for microMIPS kernels it will not reach that many instructions unless the function is 512 bytes long since we calculate the maximum number of instructions to check by dividing the function length by the 4 byte size of a union mips_instruction. In microMIPS kernels this won't do since instructions are variable length. Fix this by instead checking whether the pointer to the current instruction has reached the end of the function, and use max_insns as a simple constant to check the number of iterations against. Signed-off-by:
-
Paul Burton authored
commit a3552dac upstream. During stack unwinding we call a number of functions to determine what type of instruction we're looking at. The union mips_instruction pointer provided to them may be pointing at a 2 byte, but not 4 byte, aligned address & we thus cannot directly access the 4 byte wide members of the union mips_instruction. To avoid this is_ra_save_ins() copies the required half-words of the microMIPS instruction to a correctly aligned union mips_instruction on the stack, which it can then access safely. The is_jump_ins() & is_sp_move_ins() functions do not correctly perform this temporary copy, and instead attempt to directly dereference 4 byte fields which may be misaligned and lead to an address exception. Fix this by copying the instruction halfwords to a temporary union mips_instruction in get_frame_info() such that we can provide a 4 byte aligned union mips_instruction to the is_*_ins() functions and they do not need to deal with misalignment themselves. Signed-off-by:
-
Paul Burton authored
commit ccaf7caf upstream. get_frame_info() can be called in microMIPS kernels with the ISA bit already clear. For example this happens when unwind_stack_by_address() is called because we begin with a PC that has the ISA bit set & subtract the (odd) offset from the preceding symbol (which does not have the ISA bit set). Since get_frame_info() unconditionally subtracts 1 from the PC in microMIPS kernels it incorrectly misaligns the address it then attempts to access code at, leading to an address error exception. Fix this by using msk_isa16_mode() to clear the ISA bit, which allows get_frame_info() to function regardless of whether it is provided with a PC that has the ISA bit set or not. Signed-off-by:
-
Felix Fietkau authored
commit 774f0c64 upstream. Disabling ethernet during reboot (only to enable it again when the ethernet driver attaches) can put the chip into a faulty state where it corrupts the header of all incoming packets. This happens if packets arrive during the time window where the core is disabled, and it can be easily reproduced by rebooting while sending a flood ping to the broadcast address. Fixes: 95135bfa ("MIPS: Lantiq: Deactivate most of the devices by default") Signed-off-by:
Felix Fietkau <nbd@nbd.name> Acked-by:
John Crispin <john@phrozen.org> Cc: hauke.mehrtens@lantiq.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15078/Signed-off-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
-
James Cowgill authored
commit 884b4269 upstream. If copy_from_user is called with a large buffer (>= 128 bytes) and the userspace buffer refers partially to unreadable memory, then it is possible for Octeon's copy_from_user to report the wrong number of bytes have been copied. In the case where the buffer size is an exact multiple of 128 and the fault occurs in the last 64 bytes, copy_from_user will report that all the bytes were copied successfully but leave some garbage in the destination buffer. The bug is in the main __copy_user_common loop in octeon-memcpy.S where in the middle of the loop, src and dst are incremented by 128 bytes. The l_exc_copy fault handler is used after this but that assumes that "src < THREAD_BUADDR($28)". This is not the case if src has already been incremented. Fix by adding an extra fault handler which rewinds the src and dst pointers 128 bytes before falling though to l_exc_copy. Thanks to the pwritev test from the strace test suite for originally highlighting this bug! Fixes: 5b3b1688 ("MIPS: Add Cavium OCTEON processor support ...") Signed-off-by:
James Cowgill <James.Cowgill@imgtec.com> Acked-by:
David Daney <david.daney@cavium.com> Reviewed-by:
-
Mirko Parthey authored
commit bdfdaf1a upstream. The Asus WL-500W buttons are active high, but the software treats them as active low. Fix the inverted logic. Fixes: 3be97255 ("MIPS: BCM47XX: Import buttons database from OpenWrt") Signed-off-by:
Mirko Parthey <mirko.parthey@web.de> Acked-by:
Rafał Miłecki <rafal@milecki.pl> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15295/Signed-off-by:
-
Ralf Baechle authored
commit 66fd848c upstream. For certain arguments such as saddr = 0xc0a8fd60, daddr = 0xc0a8fda1, len = 80, proto = 17, sum = 0x7eae049d there will be a carry when folding the intermediate 64 bit checksum to 32 bit but the code doesn't add the carry back to the one's complement sum, thus an incorrect result will be generated. Reported-by:
Mark Zhang <bomb.zhang@gmail.com> Signed-off-by:
-
Shuah Khan authored
commit 6bee835d upstream. Move mic/mpssd examples to samples and remove it from Documentation Makefile. Create a new Makefile to build mic/mpssd. It can be built from top level directory or from mic/mpssd directory: Run make -C samples/mic/mpssd or cd samples/mic/mpssd; make Acked-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> [backported to 4.4-stable as this code is broken on newer versions of gcc and we don't want to break the build for a Documentation sample. - gregkh] Signed-off-by:
-
- 26 Feb, 2017 26 commits
-
-
Greg Kroah-Hartman authored
-
Peter Feiner authored
commit 4e59516a upstream. Between loading the new VMCS and enabling PML, the CPU was unpinned. If the vCPU thread were migrated to another CPU in the interim (e.g., due to preemption or sleeping alloc_page), then the VMWRITEs to enable PML would target the wrong VMCS -- or no VMCS at all: [ 2087.266950] vmwrite error: reg 200e value 3fe1d52000 (err -506126336) [ 2087.267062] vmwrite error: reg 812 value 1ff (err 511) [ 2087.267125] vmwrite error: reg 401e value 12229c00 (err 304258048) This patch ensures that the VMCS remains current while enabling PML by doing the VMWRITEs while the CPU is pinned. Allocation of the PML buffer is hoisted out of the critical section. Signed-off-by:
Peter Feiner <pfeiner@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Cc: "Herongguang (Stephen)" <herongguang.he@huawei.com> Signed-off-by:
-
Peter Chen authored
commit 1bc7da87 upstream. This reverts commit e765bfb7. In the most of cases, we only use one transaction per frame and the frame rate may be high, If the platforms want to support multiple transactions but less frame rate cases like [1] and [2], it can set "non-zero-ttctrl-ttha" at dts. [1] http://www.spinics.net/lists/linux-usb/msg123125.html [2] http://www.spinics.net/lists/linux-usb/msg118679.htmlSigned-off-by:
Peter Chen <peter.chen@nxp.com> Cc: Martin Fuzzey <mfuzzey@parkeon.com> Signed-off-by:
-
Michael Schenk authored
commit 575ddce0 upstream. In the function rtl_usb_start we pre-allocate a certain number of urbs for RX path but they will not be freed when calling rtl_usb_stop. This results in leaking urbs when doing ifconfig up and down. Eventually, the system has no available urbs. Signed-off-by:
Michael Schenk <michael.schenk@albis-elcon.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Tejun Heo authored
commit 5f478e4e upstream. When !CONFIG_CGROUP_WRITEBACK, bdi has single bdi_writeback_congested at bdi->wb_congested. cgwb_bdi_init() allocates it with kzalloc() and doesn't do further initialization. This usually works fine as the reference count gets bumped to 1 by wb_init() and the put from wb_exit() releases it. However, when wb_init() fails, it puts the wb base ref automatically freeing the wb and the explicit kfree() in cgwb_bdi_init() error path ends up trying to free the same pointer the second time causing a double-free. Fix it by explicitly initilizing the refcnt to 1 and putting the base ref from cgwb_bdi_destroy(). Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Fixes: a13f35e8 ("writeback: don't embed root bdi_writeback_congested in bdi_writeback") Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Thomas Gleixner authored
commit 6cf18e69 upstream. This interrupt handler is broken in several ways: - It loops forever when the op code is not decodeable - It never returns IRQ_HANDLED because the only way to exit the loop returns IRQ_NONE unconditionally. The whole concept of this is broken. Creating devices in an interrupt handler is beyond any point of sanity. Make it at least behave halfways sane so accidental users do not have to deal with a hard to debug lockup. Fixes: e809c22b ("goldfish: add the goldfish virtual bus") Reported-by:
Gabriel C <nix.or.die@gmail.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Thomas Gleixner authored
commit 47512cfd upstream. The goldfish platform code registers the platform device unconditionally which causes havoc in several ways if the goldfish_pdev_bus driver is enabled: - Access to the hardcoded physical memory region, which is either not available or contains stuff which is completely unrelated. - Prevents that the interrupt of the serial port can be requested - In case of a spurious interrupt it goes into a infinite loop in the interrupt handler of the pdev_bus driver (which needs to be fixed seperately). Add a 'goldfish' command line option to make the registration opt-in when the platform is compiled in. I'm seriously grumpy about this engineering trainwreck, which has seven SOBs from Intel developers for 50 lines of code. And none of them figured out that this is broken. Impressive fail! Fixes: ddd70cf9 ("goldfish: platform device for x86") Reported-by:
-
Johan Hovold authored
commit 9fef37d7 upstream. The current implementation failed to detect short transfers, something which could lead to bits of the uninitialised heap transfer buffer leaking to user space. Fixes: 149fc791 ("USB: ark3116: Setup some basic infrastructure for new ark3116 driver.") Fixes: f4c1e8d5 ("USB: ark3116: Make existing functions 16450-aware and add close and release functions.") Reviewed-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 2eee0502 upstream. The opticon driver used a control request at open to trigger a CTS status notification to be sent over the bulk-in pipe. When the driver was converted to using the generic read implementation, an inverted test prevented this request from being sent, something which could lead to TIOCMGET reporting an incorrect CTS state. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Fixes: 7a6ee2b0 ("USB: opticon: switch to generic read implementation") Reviewed-by:
-
Johan Hovold authored
commit 5ed8d410 upstream. Make sure to detect short control transfers and return zero on success when retrieving the modem status. This fixes the TIOCMGET implementation which since e1ed212d ("USB: spcp8x5: add proper modem-status support") has returned TIOCM_LE on successful retrieval, and avoids leaking bits from the stack on short transfers. This also fixes the carrier-detect implementation which since the above mentioned commit unconditionally has returned true. Fixes: e1ed212d ("USB: spcp8x5: add proper modem-status support") Reviewed-by:
-
Johan Hovold authored
commit a6bb1e17 upstream. FTDI devices use a receive latency timer to periodically empty the receive buffer and report modem and line status (also when the buffer is empty). When a break or error condition is detected the corresponding status flags will be set on a packet with nonzero data payload and the flags are not updated until the break is over or further characters are received. In order to avoid over-reporting break and error conditions, these flags must therefore only be processed for packets with payload. This specifically fixes the case where after an overrun, the error condition is continuously reported and NULL-characters inserted until further data is received. Reported-by:
Michael Walle <michael@walle.cc> Fixes: 72fda3ca ("USB: serial: ftd_sio: implement sysrq handling on break") Fixes: 166ceb69 ("USB: ftdi_sio: clean up line-status handling") Signed-off-by:
-
Johan Hovold authored
commit c6dce262 upstream. Since commit 557aaa7f ("ft232: support the ASYNC_LOW_LATENCY flag") the FTDI driver has been using a receive latency-timer value of 1 ms instead of the device default of 16 ms. The latency timer is used to periodically empty a non-full receive buffer, but a status header is always sent when the timer expires including when the buffer is empty. This means that a two-byte bulk message is received every millisecond also for an otherwise idle port as long as it is open. Let's restore the pre-2009 behaviour which reduces the rate of the status messages to 1/16th (e.g. interrupt frequency drops from 1 kHz to 62.5 Hz) by not setting ASYNC_LOW_LATENCY by default. Anyone willing to pay the price for the minimum-latency behaviour should set the flag explicitly instead using the TIOCSSERIAL ioctl or a tool such as setserial (e.g. setserial /dev/ttyUSB0 low_latency). Note that since commit 0cbd81a9 ("USB: ftdi_sio: remove tty->low_latency") the ASYNC_LOW_LATENCY flag has no other effects but to set a minimal latency timer. Reported-by:
Antoine Aubert <a.aubert@overkiz.com> Fixes: 557aaa7f ("ft232: support the ASYNC_LOW_LATENCY flag") Signed-off-by:
-
Johan Hovold authored
commit 427c3a95 upstream. Make sure to detect short responses when fetching the modem status in order to avoid parsing uninitialised buffer data and having bits of it leak to user space. Note that we still allow for short 1-byte responses. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reviewed-by:
-
Ken Lin authored
commit 9a593656 upstream. Add new USB IDs for cp2104/5 devices on Bx50v3 boards due to the design change. Signed-off-by:
Ken Lin <yungching0725@gmail.com> Signed-off-by:
-
Johan Hovold authored
commit 5182c2cf upstream. Fix another NULL-pointer dereference at open should a malicious device lack an interrupt-in endpoint. Note that the driver has a broken check for an interrupt-in endpoint which means that an interrupt URB has never even been submitted. Fixes: 3f542974 ("USB: Moschip 7840 USB-Serial Driver") Reviewed-by:
-
Javier Martinez Canillas authored
commit abe81f3b upstream. If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/tty/serial/msm_serial.ko | grep alias $ After this patch: $ modinfo drivers/tty/serial/msm_serial.ko | grep alias alias: of:N*T*Cqcom,msm-uartdmC* alias: of:N*T*Cqcom,msm-uartdm alias: of:N*T*Cqcom,msm-uartC* alias: of:N*T*Cqcom,msm-uart Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Acked-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Maxime Jayat authored
[ Upstream commit e623a9e9 ] Commit 34b88a68 ("net: Fix use after free in the recvmmsg exit path"), changed the exit path of recvmmsg to always return the datagrams variable and modified the error paths to set the variable to the error code returned by recvmsg if necessary. However in the case sock_error returned an error, the error code was then ignored, and recvmmsg returned 0. Change the error path of recvmmsg to correctly return the error code of sock_error. The bug was triggered by using recvmmsg on a CAN interface which was not up. Linux 4.6 and later return 0 in this case while earlier releases returned -ENETDOWN. Fixes: 34b88a68 ("net: Fix use after free in the recvmmsg exit path") Signed-off-by:
Maxime Jayat <maxime.jayat@mobile-devices.fr> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit ca4ef457 ] The skbs processed by ip_cmsg_recv() are not guaranteed to be linear e.g. when sending UDP packets over loopback with MSGMORE. Using csum_partial() on [potentially] the whole skb len is dangerous; instead be on the safe side and use skb_checksum(). Thanks to syzkaller team to detect the issue and provide the reproducer. v1 -> v2: - move the variable declaration in a tighter scope Fixes: ad6f939a ("ip: Add offset parameter to ip_cmsg_recv") Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
David S. Miller authored
[ Upstream commit 4c03b862 ] A nested lock depth was added to the hasbin_delete() code but it doesn't actually work some well and results in tons of lockdep splats. Fix the code instead to properly drop the lock around the operation and just keep peeking the head of the hashbin queue. Reported-by:
-
Andrey Konovalov authored
[ Upstream commit 5edabca9 ] In the current DCCP implementation an skb for a DCCP_PKT_REQUEST packet is forcibly freed via __kfree_skb in dccp_rcv_state_process if dccp_v6_conn_request successfully returns. However, if IPV6_RECVPKTINFO is set on a socket, the address of the skb is saved to ireq->pktopts and the ref count for skb is incremented in dccp_v6_conn_request, so skb is still in use. Nevertheless, it gets freed in dccp_rcv_state_process. Fix by calling consume_skb instead of doing goto discard and therefore calling __kfree_skb. Similar fixes for TCP: fb7e2399 [TCP]: skb is unexpectedly freed. 0aea76d3 tcp: SYN packets are now simply consumed Signed-off-by:
-
Anoob Soman authored
[ Upstream commit 2bd624b4 ] Commit 66644982 ("packet: call fanout_release, while UNREGISTERING a netdev"), unfortunately, introduced the following issues. 1. calling mutex_lock(&fanout_mutex) (fanout_release()) from inside rcu_read-side critical section. rcu_read_lock disables preemption, most often, which prohibits calling sleeping functions. [ ] include/linux/rcupdate.h:560 Illegal context switch in RCU read-side critical section! [ ] [ ] rcu_scheduler_active = 1, debug_locks = 0 [ ] 4 locks held by ovs-vswitchd/1969: [ ] #0: (cb_lock){++++++}, at: [<ffffffff8158a6c9>] genl_rcv+0x19/0x40 [ ] #1: (ovs_mutex){+.+.+.}, at: [<ffffffffa04878ca>] ovs_vport_cmd_del+0x4a/0x100 [openvswitch] [ ] #2: (rtnl_mutex){+.+.+.}, at: [<ffffffff81564157>] rtnl_lock+0x17/0x20 [ ] #3: (rcu_read_lock){......}, at: [<ffffffff81614165>] packet_notifier+0x5/0x3f0 [ ] [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff810c9077>] lockdep_rcu_suspicious+0x107/0x110 [ ] [<ffffffff810a2da7>] ___might_sleep+0x57/0x210 [ ] [<ffffffff810a2fd0>] __might_sleep+0x70/0x90 [ ] [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0 [ ] [<ffffffff810de93f>] ? vprintk_default+0x1f/0x30 [ ] [<ffffffff81186e88>] ? printk+0x4d/0x4f [ ] [<ffffffff816106dd>] fanout_release+0x1d/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 2. calling mutex_lock(&fanout_mutex) inside spin_lock(&po->bind_lock). "sleeping function called from invalid context" [ ] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 [ ] in_atomic(): 1, irqs_disabled(): 0, pid: 1969, name: ovs-vswitchd [ ] INFO: lockdep is turned off. [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff810a2f52>] ___might_sleep+0x202/0x210 [ ] [<ffffffff810a2fd0>] __might_sleep+0x70/0x90 [ ] [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0 [ ] [<ffffffff816106dd>] fanout_release+0x1d/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 3. calling dev_remove_pack(&fanout->prot_hook), from inside spin_lock(&po->bind_lock) or rcu_read-side critical-section. dev_remove_pack() -> synchronize_net(), which might sleep. [ ] BUG: scheduling while atomic: ovs-vswitchd/1969/0x00000002 [ ] INFO: lockdep is turned off. [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff81186274>] __schedule_bug+0x64/0x73 [ ] [<ffffffff8162b8cb>] __schedule+0x6b/0xd10 [ ] [<ffffffff8162c5db>] schedule+0x6b/0x80 [ ] [<ffffffff81630b1d>] schedule_timeout+0x38d/0x410 [ ] [<ffffffff810ea3fd>] synchronize_sched_expedited+0x53d/0x810 [ ] [<ffffffff810ea6de>] synchronize_rcu_expedited+0xe/0x10 [ ] [<ffffffff8154eab5>] synchronize_net+0x35/0x50 [ ] [<ffffffff8154eae3>] dev_remove_pack+0x13/0x20 [ ] [<ffffffff8161077e>] fanout_release+0xbe/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 4. fanout_release() races with calls from different CPU. To fix the above problems, remove the call to fanout_release() under rcu_read_lock(). Instead, call __dev_remove_pack(&fanout->prot_hook) and netdev_run_todo will be happy that &dev->ptype_specific list is empty. In order to achieve this, I moved dev_{add,remove}_pack() out of fanout_{add,release} to __fanout_{link,unlink}. So, call to {,__}unregister_prot_hook() will make sure fanout->prot_hook is removed as well. Fixes: 66644982 ("packet: call fanout_release, while UNREGISTERING a netdev") Reported-by:
Anoob Soman <anoob.soman@citrix.com> Acked-by:
-
Eric Dumazet authored
[ Upstream commit d199fab6 ] Multiple threads can call fanout_add() at the same time. We need to grab fanout_mutex earlier to avoid races that could lead to one thread freeing po->rollover that was set by another thread. Do the same in fanout_release(), for peace of mind, and to help us finding lockdep issues earlier. Fixes: dc99f600 ("packet: Add fanout support.") Fixes: 0648ab70 ("packet: rollover prepare: per-socket state") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 8b74d439 ] It seems nobody used LLC since linux-3.12. Fortunately fuzzers like syzkaller still know how to run this code, otherwise it would be no fun. Setting skb->sk without skb->destructor leads to all kinds of bugs, we now prefer to be very strict about it. Ideally here we would use skb_set_owner() but this helper does not exist yet, only CAN seems to have a private helper for that. Fixes: 376c7311 ("net: add a temporary sanity check in skb_orphan()") Signed-off-by:
-
Omar Sandoval authored
commit 87c279e6 upstream. Commit 0809e3ac ("block: fix plug list flushing for nomerge queues") updated blk_mq_make_request() to set request_count even when blk_queue_nomerges() returns true. However, blk_mq_make_request() only does limited plugging and doesn't use request_count; blk_sq_make_request() is the one that should have been fixed. Do that and get rid of the unnecessary work in the mq version. Fixes: 0809e3ac ("block: fix plug list flushing for nomerge queues") Signed-off-by:
Omar Sandoval <osandov@fb.com> Reviewed-by:
Ming Lei <tom.leiming@gmail.com> Reviewed-by:
Jeff Moyer <jmoyer@redhat.com> Signed-off-by:
-
Colin Ian King authored
commit 2b2f5ff0 upstream. This patch fixes a RTC wakealarm issue, namely, the event fires during hibernate and is not cleared from the list, causing hwclock to block. The current enqueuing does not trigger an alarm if any expired timers already exist on the timerqueue. This can occur when a RTC wake alarm is used to wake a machine out of hibernate and the resumed state has old expired timers that have not been removed from the timer queue. This fix skips over any expired timers and triggers an alarm if there are no pending timers on the timerqueue. Note that the skipped expired timer will get reaped later on, so there is no need to clean it up immediately. The issue can be reproduced by putting a machine into hibernate and waking it with the RTC wakealarm. Running the example RTC test program from tools/testing/selftests/timers/rtctest.c after the hibernate will block indefinitely. With the fix, it no longer blocks after the hibernate resume. BugLink: http://bugs.launchpad.net/bugs/1333569Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by:
-
Larry Finger authored
commit 60f59ce0 upstream. These drivers need to be able to reference "struct ieee80211_hw" from the driver's private data, and vice versa. The USB driver failed to store the address of ieee80211_hw in the private data. Although this bug has been present for a long time, it was not exposed until commit ba9f93f8 ("rtlwifi: Fix enter/exit power_save"). Fixes: ba9f93f8 ("rtlwifi: Fix enter/exit power_save") Signed-off-by:
-
- 23 Feb, 2017 1 commit
-
-
Greg Kroah-Hartman authored
-
