This reverts commits

  9984d666 ("drm/vc4: hdmi: Make sure the controller is powered in detect")
  411efa18 ("drm/vc4: hdmi: Move the HSM clock enable to runtime_pm")

as Michael Stapelberg reports that the new runtime PM changes cause his
Raspberry Pi 3 to hang on boot, probably due to interactions with other
changes in the DRM tree (because a bisect points to the merge in commit
e058a84b: "Merge tag 'drm-next-2021-07-01' of git://.../drm").

Revert these two commits until it's been resolved.

Link: https://lore.kernel.org/all/871r5mp7h2.fsf@midna.i-did-not-set--mail-host-address--so-tickle-me/Reported-and-tested-by: Michael Stapelberg <michael@stapelberg.ch>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Cc: Dave Airlie <airlied@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We already had the implementation for __udiv_qrnnd (unsigned divide for
multi-precision arithmetic) as part of the alpha math emulation code.

But you can disable the math emulation code - even if you shouldn't -
and then the MPI code that actually wants this functionality (and is
needed by various crypto functions) will fail to build.

So move the extended-precision divide code to be a regular library
function, just like all the regular division code is.  That way ie is
available regardless of math-emulation.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Ok, it almost certainly is still broken on actual hardware, but the
immediate reason for it having been marked BROKEN was a build error that
is fixed by just making sure the low-level IO header file is included
sufficiently early that the __EXTERN_INLINE hackery takes effect.

This was marked broken back in 2017 by commit 1883c9f4 ("alpha: mark
jensen as broken"), but Ulrich Teichert made me look at it as part of my
cross-build work to make sure -Werror actually does the right thing.

There are lots of alpha configurations that do not build cleanly, but
now it's no longer because Jensen wouldn't be buildable.  That said,
because the Jensen platform doesn't force PCI to be enabled (Jensen only
had EISA), it ends up being somewhat interesting as a source of odd
configs.
Reported-by: Ulrich Teichert <krypton@ulrich-teichert.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull s390 fixes from Vasily Gorbik:

 - Fix potential out-of-range access during secure boot facility
   detection.

 - Fully validate the VMA before calling follow_pte() in pci code.

 - Remove arch specific WARN_DYNAMIC_STACK config option.

 - Fix zcrypto kernel doc comments.

 - Update defconfigs.

* tag 's390-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: remove WARN_DYNAMIC_STACK
  s390/ap: fix kernel doc comments
  s390: update defconfigs
  s390/sclp: fix Secure-IPL facility detection
  s390/pci_mmio: fully validate the VMA before calling follow_pte()

Pull devicetree fixes from Rob Herring:

 - Revert fw_devlink tracking 'phy-handle' links. This broke at least a
   few platforms. A better solution is being worked on.

 - Add Samsung UFS binding which fell thru the cracks

 - Doc reference fixes from Mauro

 - Fix for restricted DMA error handling

* tag 'devicetree-fixes-for-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: arm: Fix Toradex compatible typo
  of: restricted dma: Fix condition for rmem init
  dt-bindings: arm: mediatek: mmsys: update mediatek,mmsys.yaml reference
  dt-bindings: net: dsa: sja1105: update nxp,sja1105.yaml reference
  dt-bindings: ufs: Add bindings for Samsung ufs host
  Revert "of: property: fw_devlink: Add support for "phy-handle" property"

The TGA boards were based on the DECchip 21030 PCI graphics accelerator
used mainly for alpha, and existed in a TURBOchannel (TC) version for
the DECstation (MIPS) workstations.

However, the config option for the TGA code is a bit confused, and says

	depends on FB && (ALPHA || TC)

because people didn't really want to enable the option for random PCI
environments, so the "ALPHA" stands in for that case (while the TC case
is then the MIPS DECstation case).

So that config dependency is kind of a mixture of architecture and bus
choices.  But it's incorrect, in that there were non-PCI-based alpha
hardware, and then the driver just causes warnings:

  drivers/video/fbdev/tgafb.c:1532:13: error: ‘tgafb_unregister’ defined but not used [-Werror=unused-function]
   1532 | static void tgafb_unregister(struct device *dev)
        |             ^~~~~~~~~~~~~~~~
  drivers/video/fbdev/tgafb.c:1387:12: error: ‘tgafb_register’ defined but not used [-Werror=unused-function]
   1387 | static int tgafb_register(struct device *dev)
        |            ^~~~~~~~~~~~~~

so let's make the config option dependencies a bit more explict:

	depends on FB
	depends on PCI || TC
	depends on ALPHA || TC

where that first "FB" is the software configuration dependency, the
second "PCI || TC" is the hardware bus dependency, while that final
"ALPHA || TC" dependency is the "don't bother asking except for these
situations.

We could make that third case have "COMPILE_TEST" as an option, and mark
the register/unregister functions as __maybe_unused, but I'm not sure
it's really worth it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The Jensen IO functions are overly copmplicated because some of the IO
addresses refer to special 'local IO' ports, and they get accessed
differently.

That then makes gcc not actually inline them, and since they were marked
"extern inline" when included through the regular <asm/io.h> path, and
then only marked "inline" when included from sys_jensen.c, you never
necessarily got a body for the IO functions at all.

The intent of the sys_jensen.c code is to actually get the non-inlined
copy generated, so remove the 'inline' from the magic macro that is
supposed to sort this all out.

Also, do not mix 'extern inline' functions (that may or may not be
inlined and will not generate a function body if they are not) with
'static inline' (that _will_ generate a function body when not inlined).
Because gcc will complain about this situation:

   error: ‘jensen_bus_outb’ is static but used in inline function ‘jensen_outb’ which is not static

because gcc basically doesn't know whether to generate a body for that
static inline function or not for that call site.

So make all of these use that __EXTERN_INLINE marker.  Gcc will
generally not inline these things on use, and then generate the function
body out-of-line in sys_jensen.c.

This makes the core IO functions build for the alpha Jensen config.

Not that the rest then builds, because it turns out Jensen also doesn't
enable PCI, which then makes other drievrs very unhappy, but that's a
separate issue.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Without CONFIG_PM enabled, the SET_RUNTIME_PM_OPS() macro ends up being
empty, and the only use of tegra_slink_runtime_{resume,suspend} goes
away, resulting in

  drivers/spi/spi-tegra20-slink.c:1200:12: error: ‘tegra_slink_runtime_resume’ defined but not used [-Werror=unused-function]
   1200 | static int tegra_slink_runtime_resume(struct device *dev)
        |            ^~~~~~~~~~~~~~~~~~~~~~~~~~
  drivers/spi/spi-tegra20-slink.c:1188:12: error: ‘tegra_slink_runtime_suspend’ defined but not used [-Werror=unused-function]
   1188 | static int tegra_slink_runtime_suspend(struct device *dev)
        |            ^~~~~~~~~~~~~~~~~~~~~~~~~~~

mark the functions __maybe_unused to make the build happy.

This hits the alpha allmodconfig build (and others).
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix board compatible typo reported by dtbs_check.

Fixes: f4d1577e ("dt-bindings: arm: Convert Tegra board/soc bindings to json-schema")
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20210912165120.188490-1-david@ixit.czSigned-off-by: Rob Herring <robh@kernel.org>

of_dma_set_restricted_buffer fails to handle negative return values from
of_property_count_elems_of_size, e.g. when the property does not exist.
This results in an attempt to assign a non-existent reserved memory
region to the device and a warning being printed. Fix the condition to
take negative values into account.

Fixes: f3cfd136 ("of: restricted dma: Don't fail device probe on rmem init failure")
Cc: Will Deacon <will@kernel.org>
Signed-off-by: David Brazdil <dbrazdil@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210917131423.2760155-1-dbrazdil@google.comSigned-off-by: Rob Herring <robh@kernel.org>

Pull power management fixes from Rafael Wysocki:
 "These fix two cpufreq issues, one in the intel_pstate driver and one
  in the core.

  Specifics:

   - Prevent intel_pstate from avoiding to use HWP, even if instructed
     to do so via the kernel command line, when HWP has been enabled
     already by the platform firmware (Doug Smythies).

   - Prevent use-after-free from occurring in the schedutil cpufreq
     governor on exit by fixing a core helper function that attempts to
     access memory associated with a kobject after calling kobject_put()
     on it (James Morse)"

* tag 'pm-5.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: schedutil: Destroy mutex before kobject_put() frees the memory
  cpufreq: intel_pstate: Override parameters if HWP forced by BIOS

Pull dma-mapping fixes from Christoph Hellwig:

 - page align size in sparc32 arch_dma_alloc (Andreas Larsson)

 - tone down a new dma-debug message (Hamza Mahfooz)

 - fix the kerneldoc for dma_map_sg_attrs (me)

* tag 'dma-mapping-5.15-1' of git://git.infradead.org/users/hch/dma-mapping:
  sparc32: page align size in arch_dma_alloc
  dma-debug: prevent an error message from causing runtime problems
  dma-mapping: fix the kerneldoc for dma_map_sg_attrs

Pull PCI fixes from Bjorn Helgaas:

 - Defer VPD sizing until we actually need the contents; fixes a
   boot-time slowdown reported by Dave Jones (Bjorn Helgaas)

 - Stop clobbering OF fwnodes when we look for an ACPI fwnode; fixes a
   virtio-iommu boot regression (Jean-Philippe Brucker)

 - Add AMD GPU multi-function power dependencies; fixes runtime power
   management, including GPU resume and temp and fan sensor issues (Evan
   Quan)

 - Update VMD maintainer to Nirmal Patel (Jon Derrick)

* tag 'pci-v5.15-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  MAINTAINERS: Add Nirmal Patel as VMD maintainer
  PCI: Add AMD GPU multi-function power dependencies
  PCI/ACPI: Don't reset a fwnode set by OF
  PCI/VPD: Defer VPD sizing until first access

Pull io_uring iov_iter retry fixes from Jens Axboe:
 "This adds a helper to save/restore iov_iter state, and modifies
  io_uring to use it.

  After that is done, we can now kill the iter->truncated addition that
  we added for this release. The io_uring change is being overly
  cautious with the save/restore/advance, but better safe than sorry and
  we can always improve that and reduce the overhead if it proves to be
  of concern. The only case to be worried about in this regard is huge
  IO, where iteration can take a while to iterate segments.

  I spent some time writing test cases, and expanded the coverage quite
  a bit from the last posting of this. liburing carries this regression
  test case now:

      https://git.kernel.dk/cgit/liburing/tree/test/file-verify.c

  which exercises all of this. It now also supports provided buffers,
  and explicitly tests for end-of-file/device truncation as well.

  On top of that, Pavel sanitized the IOPOLL retry path to follow the
  exact same pattern as normal IO"

* tag 'iov_iter.3-5.15-2021-09-17' of git://git.kernel.dk/linux-block:
  io_uring: move iopoll reissue into regular IO path
  Revert "iov_iter: track truncated size"
  io_uring: use iov_iter state save/restore helpers
  iov_iter: add helper to save iov_iter state

Pull io_uring fixes from Jens Axboe:
 "Mostly fixes for regressions in this cycle, but also a few fixes that
  predate this release.

  The odd one out is a tweak to the direct files added in this release,
  where attempting to reuse a slot is allowed instead of needing an
  explicit removal of that slot first. It's a considerable improvement
  in usability to that API, hence I'm sending it for -rc2.

   - io-wq race fix and cleanup (Hao)

   - loop_rw_iter() type fix

   - SQPOLL max worker race fix

   - Allow poll arm for O_NONBLOCK files, fixing a case where it's
     impossible to properly use io_uring if you cannot modify the file
     flags

   - Allow direct open to simply reuse a slot, instead of needing it
     explicitly removed first (Pavel)

   - Fix a case where we missed signal mask restoring in cqring_wait, if
     we hit -EFAULT (Xiaoguang)"

* tag 'io_uring-5.15-2021-09-17' of git://git.kernel.dk/linux-block:
  io_uring: allow retry for O_NONBLOCK if async is supported
  io_uring: auto-removal for direct open/accept
  io_uring: fix missing sigmask restore in io_cqring_wait()
  io_uring: pin SQPOLL data before unlocking ring lock
  io-wq: provide IO_WQ_* constants for IORING_REGISTER_IOWQ_MAX_WORKERS arg items
  io-wq: fix potential race of acct->nr_workers
  io-wq: code clean of io_wqe_create_worker()
  io_uring: ensure symmetry in handling iter types in loop_rw_iter()

Pull block fixes from Jens Axboe:

 - NVMe pull request via Christoph:
       - fix ANA state updates when a namespace is not present (Anton
         Eidelman)
       - nvmet: fix a width vs precision bug in
         nvmet_subsys_attr_serial_show (Dan Carpenter)
       - avoid race in shutdown namespace removal (Daniel Wagner)
       - fix io_work priority inversion in nvme-tcp (Keith Busch)
       - destroy cm id before destroy qp to avoid use after free (Ruozhu
         Li)

 - blk-integrity profile registration fixes (Christoph, Lihong)

 - blk-cgroup UAF fix (Li)

 - blk-mq tag iterator fix (Ming)

 - blkcg memory leak fix (Yanfei)

* tag 'block-5.15-2021-09-17' of git://git.kernel.dk/linux-block:
  blk-cgroup: fix UAF by grabbing blkcg lock before destroying blkg pd
  blkcg: fix memory leak in blk_iolatency_init
  nvme: remove the call to nvme_update_disk_info in nvme_ns_remove
  block: flush the integrity workqueue in blk_integrity_unregister
  block: check if a profile is actually registered in blk_integrity_unregister
  nvme-tcp: fix io_work priority inversion
  nvme-rdma: destroy cm id before destroy qp to avoid use after free
  nvme-multipath: fix ANA state updates when a namespace is not present
  nvme: avoid race in shutdown namespace removal
  nvmet: fix a width vs precision bug in nvmet_subsys_attr_serial_show()
  blk-mq: avoid to iterate over stale request

Pull arm64 fixes and cleanups from Catalin Marinas:

 - Fix the memset() size when re-initialising the SVE state.

 - Mark __stack_chk_guard as __ro_after_init.

 - Remove duplicate include.

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Mark __stack_chk_guard as __ro_after_init
  arm64/kernel: remove duplicate include in process.c
  arm64/sve: Use correct size when reinitialising SVE state

Pull xen fixes from Juergen Gross:

 - The first hunk of a Xen swiotlb fixup series fixing multiple minor
   issues and doing some small cleanups

 - Some further Xen related fixes avoiding WARN() splats when running as
   Xen guests or dom0

 - A Kconfig fix allowing the pvcalls frontend to be built as a module

* tag 'for-linus-5.15b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  swiotlb-xen: drop DEFAULT_NSLABS
  swiotlb-xen: arrange to have buffer info logged
  swiotlb-xen: drop leftover __ref
  swiotlb-xen: limit init retries
  swiotlb-xen: suppress certain init retries
  swiotlb-xen: maintain slab count properly
  swiotlb-xen: fix late init retry
  swiotlb-xen: avoid double free
  xen/pvcalls: backend can be a module
  xen: fix usage of pmd_populate in mremap for pv guests
  xen: reset legacy rtc flag for PV domU
  PM: base: power: don't try to use non-existing RTC for storing data
  xen/balloon: use a kernel thread instead a workqueue

Changeset cba3c40d ("dt-bindings: arm: mediatek: mmsys: convert to YAML format")
renamed: Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
to: Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml.

Update its cross-reference accordingly.

Fixes: cba3c40d ("dt-bindings: arm: mediatek: mmsys: convert to YAML format")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/a87eb079a73e8ab41cdf6e40e80b1d1f868da6bd.1631785820.git.mchehab+huawei@kernel.org

Changeset 62568bdb ("dt-bindings: net: dsa: sja1105: convert to YAML schema")
renamed: Documentation/devicetree/bindings/net/dsa/sja1105.txt
to: Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml.

Update its cross-reference accordingly.

Fixes: 62568bdb ("dt-bindings: net: dsa: sja1105: convert to YAML schema")
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/994ce6c6358746ff600459822b9f6e336db933c9.1631785820.git.mchehab+huawei@kernel.org

Pull drm fixes from Dave Airlie:
 "Slightly busier than usual rc2, but mostly scattered amdgpu fixes,
  some i915 and etnaviv resolves an MMU/runtime PM blowup.

  amdgpu:
   - UBSAN fix
   - Powerplay table update fix
   - Fix use after free in BO moves
   - Debugfs init fixes
   - vblank workqueue fixes for headless devices
   - FPU fixes
   - sysfs_emit fixes
   - SMU updates for cyan skillfish
   - Backlight fixes when DMCU is not initialized
   - DP MST fixes
   - HDCP compliance fix
   - Link training fix
   - Runtime pm fix
   - Panel orientation fixes
   - Display GPUVM fix for yellow carp
   - Add missing license

  amdkfd:
   - Drop PCI atomics requirement if proper firmware is available
   - Suspend/resume fixes for IOMMUv2 cases

  radeon:
   - AGP fix

  i915:
   - Propagate DP link training error returns
   - Use max link params for eDP 1.3 and earlier
   - Build warning fixes
   - Gem selftest fixes
   - Ensure wakeref is held before hardware access

  etnaviv:
   - MMU context vs runtime PM fix"

* tag 'drm-fixes-2021-09-17' of git://anongit.freedesktop.org/drm/drm: (44 commits)
  drm/amdgpu/display: add a proper license to dc_link_dp.c
  drm/amd/display: Fix white screen page fault for gpuvm
  amd/display: enable panel orientation quirks
  drm/amdgpu: Demote TMZ unsupported log message from warning to info
  drm/amdgpu: Drop inline from amdgpu_ras_eeprom_max_record_count
  drm/amd/pm: fix runpm hang when amdgpu loaded prior to sound driver
  drm/radeon: pass drm dev radeon_agp_head_init directly
  drm/amdgpu: move iommu_resume before ip init/resume
  drm/amdgpu: add amdgpu_amdkfd_resume_iommu
  drm/amdkfd: separate kfd_iommu_resume from kfd_resume
  drm/amd/display: Link training retry fix for abort case
  drm/amd/display: Fix unstable HPCP compliance on Chrome Barcelo
  drm/amd/display: dsc mst 2 4K displays go dark with 2 lane HBR3
  drm/amd/display: Get backlight from PWM if DMCU is not initialized
  drm/amdkfd: make needs_pcie_atomics FW-version dependent
  drm/amdgpu: add manual sclk/vddc setting support for cyan skilfish(v3)
  drm/amdgpu: add some pptable funcs for cyan skilfish(v3)
  drm/amdgpu: update SMU driver interface for cyan skilfish(v3)
  drm/amdgpu: update SMU PPSMC for cyan skilfish
  drm/amdgpu: fix sysfs_emit/sysfs_emit_at warnings(v2)
  ...

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bpf.

  Current release - regressions:

   - vhost_net: fix OoB on sendmsg() failure

   - mlx5: bridge, fix uninitialized variable usage

   - bnxt_en: fix error recovery regression

  Current release - new code bugs:

   - bpf, mm: fix lockdep warning triggered by stack_map_get_build_id_offset()

  Previous releases - regressions:

   - r6040: restore MDIO clock frequency after MAC reset

   - tcp: fix tp->undo_retrans accounting in tcp_sacktag_one()

   - dsa: flush switchdev workqueue before tearing down CPU/DSA ports

  Previous releases - always broken:

   - ptp: dp83640: don't define PAGE0, avoid compiler warning

   - igc: fix tunnel segmentation offloads

   - phylink: update SFP selected interface on advertising changes

   - stmmac: fix system hang caused by eee_ctrl_timer during suspend/resume

   - mlx5e: fix mutual exclusion between CQE compression and HW TS

  Misc:

   - bpf, cgroups: fix cgroup v2 fallback on v1/v2 mixed mode

   - sfc: fallback for lack of xdp tx queues

   - hns3: add option to turn off page pool feature"

* tag 'net-5.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (67 commits)
  mlxbf_gige: clear valid_polarity upon open
  igc: fix tunnel offloading
  net/{mlx5|nfp|bnxt}: Remove unnecessary RTNL lock assert
  net: wan: wanxl: define CROSS_COMPILE_M68K
  selftests: nci: replace unsigned int with int
  net: dsa: flush switchdev workqueue before tearing down CPU/DSA ports
  Revert "net: phy: Uniform PHY driver access"
  net: dsa: destroy the phylink instance on any error in dsa_slave_phy_setup
  ptp: dp83640: don't define PAGE0
  bnx2x: Fix enabling network interfaces without VFs
  Revert "Revert "ipv4: fix memory leaks in ip_cmsg_send() callers""
  tcp: fix tp->undo_retrans accounting in tcp_sacktag_one()
  net-caif: avoid user-triggerable WARN_ON(1)
  bpf, selftests: Add test case for mixed cgroup v1/v2
  bpf, selftests: Add cgroup v1 net_cls classid helpers
  bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode
  bpf: Add oversize check before call kvcalloc()
  net: hns3: fix the timing issue of VF clearing interrupt sources
  net: hns3: fix the exception when query imp info
  net: hns3: disable mac in flr process
  ...

Merge tag 'amd-drm-fixes-5.15-2021-09-16' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-5.15-2021-09-16:

amdgpu:
- UBSAN fix
- Powerplay table update fix
- Fix use after free in BO moves
- Debugfs init fixes
- vblank workqueue fixes for headless devices
- FPU fixes
- sysfs_emit fixes
- SMU updates for cyan skillfish
- Backlight fixes when DMCU is not initialized
- DP MST fixes
- HDCP compliance fix
- Link training fix
- Runtime pm fix
- Panel orientation fixes
- Display GPUVM fix for yellow carp
- Add missing license

amdkfd:
- Drop PCI atomics requirement if proper firmware is available
- Suspend/resume fixes for IOMMUv2 cases

radeon:
- AGP fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916140611.59816-1-alexander.deucher@amd.com

Merge tag 'drm-intel-fixes-2021-09-16' of ssh://git.freedesktop.org/git/drm/drm-intel into drm-fixes

drm/i915 fixes for v5.15-rc2:
- Propagate DP link training error returns
- Use max link params for eDP 1.3 and earlier
- Build warning fixes
- Gem selftest fixes
- Ensure wakeref is held before hardware access
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8735q4wsu7.fsf@intel.com

tx timeout and slot time are currently specified in units of HZ.  On
Alpha, HZ is defined as 1024.  When building alpha:allmodconfig, this
results in the following error message.

  drivers/net/hamradio/6pack.c: In function 'sixpack_open':
  drivers/net/hamradio/6pack.c:71:41: error:
  	unsigned conversion from 'int' to 'unsigned char'
  	changes value from '256' to '0'

In the 6PACK protocol, tx timeout is specified in units of 10 ms and
transmitted over the wire:

    https://www.linux-ax25.org/wiki/6PACK

Defining a value dependent on HZ doesn't really make sense, and
presumably comes from the (very historical) situation where HZ was
originally 100.

Note that the SIXP_SLOTTIME use explicitly is about 10ms granularity:

        mod_timer(&sp->tx_t, jiffies + ((when + 1) * HZ) / 100);

and the SIXP_TXDELAY walue is sent as a byte over the wire.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fixes a very annoying issue where the driver view of the MMU state gets
out of sync with the actual hardware state across a runtime PM cycle,
so we end up restarting the GPU with the wrong (potentially already
freed) MMU context. Hilarity ensues.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/729a561b6cfed090457bcc856a9e14ed6209fe21.camel@pengutronix.de

With the new static annotation, the compiler warns when the functions
are actually unused:

   drivers/gpu/drm/rockchip/cdn-dp-core.c:1123:12: error: 'cdn_dp_resume' defined but not used [-Werror=unused-function]
    1123 | static int cdn_dp_resume(struct device *dev)
         |            ^~~~~~~~~~~~~

Mark them __maybe_unused to suppress that warning as well.

[ Not so 'new' static annotations any more, and I removed the part of
  the patch that added __maybe_unused to cdn_dp_suspend(), because it's
  used by the shutdown/remove code.

  So only the resume function ends up possibly unused if CONFIG_PM isn't
  set     - Linus ]

Fixes: 7c49abb4 ("drm/rockchip: cdn-dp-core: Make cdn_dp_core_suspend/resume static")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arm:allmodconfig fails to build with the following error.

  drivers/cpufreq/vexpress-spc-cpufreq.c:454:13: error:
					unused variable 'cur_cluster'

Remove the unused variable.

Fixes: bb8c26d9 ("cpufreq: vexpress: Set CPUFREQ_IS_COOLING_DEV flag")
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Some drivers pass a pointer to volatile data to virt_to_bus() and
virt_to_phys(), and that works fine.  One exception is alpha.  This
results in a number of compile errors such as

  drivers/net/wan/lmc/lmc_main.c: In function 'lmc_softreset':
  drivers/net/wan/lmc/lmc_main.c:1782:50: error:
	passing argument 1 of 'virt_to_bus' discards 'volatile'
	qualifier from pointer target type

  drivers/atm/ambassador.c: In function 'do_loader_command':
  drivers/atm/ambassador.c:1747:58: error:
	passing argument 1 of 'virt_to_bus' discards 'volatile'
	qualifier from pointer target type

Declare the parameter of virt_to_phys and virt_to_bus as pointer to
volatile to fix the problem.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This driver isn't enabled most places because of the ISA config
dependency, but alpha still has it.  And I think the 'Jensen' actually
did have an ISA slot.

However, it doesn't build cleanly, because the "Vortex bus master" code
just casts the skb->data pointer to 'int':

        outl((int) (skb->data), ioaddr + Wn7_MasterAddr);

which is all kinds of broken.  Even on a good old traditional PC/AT it
would be broken because the high bits will be random kernel address
bits, but presumably the hardware ignores those bits.  I mean, it's ISA.
We're talking 16MB dma limits. The "good old days".

Make the build happy with this kind of craziness by using the proper
isa_virt_to_bus() handling that the full bus master code uses anyway
(the Vortex bus mastering is a limited special case).

Who knows, this might even work.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull parisc fix from Helge Deller:
 "Fix a build warning when using the PAGE0 pointer"

* tag 'for-5.15/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Use absolute_pointer() to define PAGE0

Pull m68k fixes from Geert Uytterhoeven:

 - Warning fixes to mitigate CONFIG_WERROR=y

* tag 'm68k-for-v5.15-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: mvme: Remove overdue #warnings in RTC handling
  m68k: Double cast io functions to unsigned long

__stack_chk_guard is setup once while init stage and never changed
after that.

Although the modification of this variable at runtime will usually
cause the kernel to crash (so does the attacker), it should be marked
as __ro_after_init, and it should not affect performance if it is
placed in the ro_after_init section.
Signed-off-by: Dan Li <ashimida@linux.alibaba.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1631612642-102881-1-git-send-email-ashimida@linux.alibaba.comSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

Remove all but the first include of linux/sched.h from process.c
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210902011126.29828-1-lv.ruyi@zte.com.cnSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

When we need a buffer for SVE register state we call sve_alloc() to make
sure that one is there. In order to avoid repeated allocations and frees
we keep the buffer around unless we change vector length and just memset()
it to ensure a clean register state. The function that deals with this
takes the task to operate on as an argument, however in the case where we
do a memset() we initialise using the SVE state size for the current task
rather than the task passed as an argument.

This is only an issue in the case where we are setting the register state
for a task via ptrace and the task being configured has a different vector
length to the task tracing it. In the case where the buffer is larger in
the traced process we will leak old state from the traced process to
itself, in the case where the buffer is smaller in the traced process we
will overflow the buffer and corrupt memory.

Fixes: bc0ee476 ("arm64/sve: Core task context handling")
Cc: <stable@vger.kernel.org> # 4.15.x
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210909165356.10675-1-broonie@kernel.orgSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

This patch adds DT bindings for Samsung ufs hci
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20210915111844.42752-1-chanho61.park@samsung.comSigned-off-by: Rob Herring <robh@kernel.org>

Was missing.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
The "base_addr_is_mc_addr" field was added for dcn3.1 support but
pa_config was never updated to set it to false.

Uninitialized memory causes it to be set to true which results in
address mistranslation and white screen.

[How]
Use memset to ensure all fields are initialized to 0 by default.

Fixes: 64b1d0e8 ("drm/amd/display: Add DCN3.1 HWSEQ")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This patch allows panel orientation quirks from DRM core to be
used. They attach a DRM connector property "panel orientation"
which indicates in which direction the panel has been mounted.
Some machines have the internal screen mounted with a rotation.

Since the panel orientation quirks need the native mode from the
EDID, check for it in amdgpu_dm_connector_ddc_get_modes.
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

As the user cannot do anything about the unsupported Trusted Memory Zone
(TMZ) feature, do not warn about it, but make it informational, so
demote the log level from warning to info.
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>