- 05 Jul, 2020 20 commits
-
-
Vladimir Oltean authored
Phylink uses the .mac_an_restart method to offer the user an implementation of the "ethtool -r" behavior, when the media-side auto negotiation can be restarted by the local MAC PCS. This is the case for fiber modes 1000Base-X and 2500Base-X (IEEE clause 37) that don't have an Ethernet PHY connected locally, and the media is connected to the MAC PCS directly. On the other hand, the Cisco SGMII and USXGMII standards also have an auto negotiation mechanism based on IEEE 802.3 clause 37 (their respective specs require a MAC PCS and a PHY PCS to implement the same state machine, which is described in IEEE 802.3 "Auto-Negotiation Figure 37-6"), so the ability to restart auto-negotiation is intrinsically symmetrical (the MAC PCS can do it too). However, it appears that not all SGMII/USXGMII PHYs have logic to restart the MDI-side auto-negotiation process when they detect a transition of the SGMII link from data mode to configuration mode. Some do (VSC8234) and some don't (AR8033, MV88E1111). IEEE and/or Cisco specification wordings to not help to prove whether propagating the "AN restart" event from MII side ("mr_restart_an") to MDI side ("mr_restart_negotiation") is required behavior - neither of them specifies any mandatory interaction between the clause 37 AN state machine from Figure 37-6 and the clause 28 AN state machine from Figure 28-18. Therefore, even if a certain behavior could be proven as being required, real-life SGMII/USXGMII PHYs are inconsistent enough that a clause 37 AN restart cannot be used by phylink to reliably trigger a media-side renegotiation, when the user requests it via ethtool. The only remaining use that the .mac_an_restart callback might possibly have, given what we know now, is to implement some silicon quirks, but so far that has proven to not be necessary. So remove this code for now, since it never gets called and we don't foresee any circumstance in which it might be, either. Signed-off-by:Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
state->speed holds a value of 10, 100, 1000 or 2500, but SYS_MAC_FC_CFG_FC_LINK_SPEED expects a value in the range 0, 1, 2 or 3. So set the correct speed encoding into this register. Signed-off-by:
-
Vladimir Oltean authored
In VSC9959, the PCS is the one who performs rate adaptation (symbol duplication) to the speed negotiated by the PHY. The MAC is unaware of that and must remain configured for gigabit. If it is configured at OCELOT_SPEED_10 or OCELOT_SPEED_100, it'll start transmitting PAUSE frames out of control and never recover, _even if_ we then reconfigure it at OCELOT_SPEED_1000 afterwards. This patch fixes a bug that luckily did not have any functional impact. We were writing 10, 100, 1000 etc into this 2-bit field in DEV_CLOCK_CFG, but the hardware expects values in the range 0, 1, 2, 3. So all speed values were getting truncated to 0, which is OCELOT_SPEED_2500, and which also appears to be fine. Signed-off-by:
-
Vladimir Oltean authored
Ping tested: [ 11.808455] mscc_felix 0000:00:00.5 swp0: Link is Up - 1Gbps/Full - flow control rx/tx [ 11.816497] IPv6: ADDRCONF(NETDEV_CHANGE): swp0: link becomes ready [root@LS1028ARDB ~] # ethtool -s swp0 advertise 0x4 [ 18.844591] mscc_felix 0000:00:00.5 swp0: Link is Down [ 22.048337] mscc_felix 0000:00:00.5 swp0: Link is Up - 100Mbps/Half - flow control off [root@LS1028ARDB ~] # ip addr add 192.168.1.1/24 dev swp0 [root@LS1028ARDB ~] # ping 192.168.1.2 PING 192.168.1.2 (192.168.1.2): 56 data bytes (...) ^C--- 192.168.1.2 ping statistics --- 3 packets transmitted, 3 packets received, 0% packet loss round-trip min/avg/max = 0.383/0.611/1.051 ms [root@LS1028ARDB ~] # ethtool -s swp0 advertise 0x10 [ 355.637747] mscc_felix 0000:00:00.5 swp0: Link is Down [ 358.788034] mscc_felix 0000:00:00.5 swp0: Link is Up - 1Gbps/Half - flow control off [root@LS1028ARDB ~] # ping 192.168.1.2 PING 192.168.1.2 (192.168.1.2): 56 data bytes (...) ^C --- 192.168.1.2 ping statistics --- 16 packets transmitted, 16 packets received, 0% packet loss round-trip min/avg/max = 0.301/0.384/1.138 ms Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Vladimir Oltean authored
The driver appears to write to BMCR_SPEED and BMCR_DUPLEX, fields which are read-only, since they are actually configured through the vendor-specific IF_MODE (0x14) register. But the reason we're writing back the read-only values of MII_BMCR is to alter these writable fields: BMCR_RESET BMCR_LOOPBACK BMCR_ANENABLE BMCR_PDOWN BMCR_ISOLATE BMCR_ANRESTART In particular, the only field which is really relevant to this driver is BMCR_ANENABLE. Clarify that intention by spelling it out, using phy_set_bits and phy_clear_bits. The driver also made a few writes to BMCR_RESET and BMCR_ANRESTART which are unnecessary and may temporarily disrupt the link to the PHY. Remove them. Signed-off-by:
-
David S. Miller authored
Vaibhav Gupta says: ==================== qlogic: use generic power management Linux Kernel Mentee: Remove Legacy Power Management. The purpose of this patch series is to remove legacy power management callbacks from qlogic ethernet drivers. The callbacks performing suspend() and resume() operations are still calling pci_save_state(), pci_set_power_state(), etc. and handling the power management themselves, which is not recommended. The conversion requires the removal of the those function calls and change the callback definition accordingly and make use of dev_pm_ops structure. All patches are compile-tested only. V2: Fix unused variable warning in v1. ==================== Signed-off-by: -
Vaibhav Gupta authored
With legacy PM, drivers themselves were responsible for managing the device's power states and taking care of register states. And they use PCI helper functions to do it. After upgrading to the generic structure, PCI core will take care of required tasks and drivers should do only device-specific operations. .suspend() calls __qlcnic_shutdown, which then calls qlcnic_82xx_shutdown; .resume() calls __qlcnic_resume, which then calls qlcnic_82xx_resume; Both ...82xx..() are define in drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c and are used only in drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c. Hence upgrade them and remove PCI function calls, like pci_save_state() and pci_enable_wake(), inside them Compile-tested only. Signed-off-by:
Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by:
-
Vaibhav Gupta authored
With legacy PM, drivers themselves were responsible for managing the device's power states and takes care of register states. And they use PCI helper functions to do it. After upgrading to the generic structure, PCI core will take care of required tasks and drivers should do only device-specific operations. In this driver: netxen_nic_resume() calls netxen_nic_attach_func() which then invokes PCI helper functions like pci_enable_device(), pci_set_power_state() and pci_restore_state(). Other function: - netxen_io_slot_reset() also calls netxen_nic_attach_func(). Also, netxen_io_slot_reset() returns specific value based on the return value of netxen_nic_attach_func() as whole. Thus, cannot simply move some piece of code from netxen_nic_attach_func() to it. Hence, define a new function netxen_nic_attach_late_func() to do the tasks which has to be done after PCI helper functions have done their job. Now, netxen_nic_attach_func() invokes netxen_nic_attach_late_func(), thus netxen_io_slot_reset() behaves normally. And, netxen_nic_resume() calls netxen_nic_attach_late_func() to avoid PCI helper functions calls. Compile-tested only. Signed-off-by:
-
Codrin Ciubotariu authored
Private structure members live_ports, on_ports, rx_ports, tx_ports are initialized but not used anywhere. Let's remove them. Suggested-by:
Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by:
-
Codrin Ciubotariu authored
The DSA subsystem moved to phylink and adjust_link() became deprecated in the process. This patch removes adjust_link from the KSZ DSA switches and adds phylink_mac_link_up() and phylink_mac_link_down(). Signed-off-by:
-
David S. Miller authored
Florian Westphal says: ==================== mptcp: add REUSEADDR/REUSEPORT/V6ONLY setsockopt support restarting an mptcp-patched sshd yields following error: sshd: error: Bind to port 22 on 0.0.0.0 failed: Address already in use. sshd: error: setsockopt IPV6_V6ONLY: Operation not supported sshd: error: Bind to port 22 on :: failed: Address already in use. sshd: fatal: Cannot bind any address. This series adds support for the needed setsockopts: First patch skips the generic SOL_SOCKET handler for MPTCP: in mptcp case, the setsockopt needs to alter the tcp socket, not the mptcp parent socket. Second patch adds minimal SOL_SOCKET support: REUSEPORT and REUSEADDR. Rest is still handled by the generic SOL_SOCKET code. Last patch adds IPV6ONLY support. This makes ipv6 work for openssh: It creates two listening sockets, before this patch, binding the ipv6 socket will fail because the port is already bound by the ipv4 one. ==================== Signed-off-by: -
Florian Westphal authored
Without this, Opensshd fails to open an ipv6 socket listening socket: error: setsockopt IPV6_V6ONLY: Operation not supported error: Bind to port 22 on :: failed: Address already in use. Opensshd opens an ipv4 and and ipv6 listening socket, but because IPV6_V6ONLY setsockopt fails, the port number is already in use. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Florian Westphal authored
This will e.g. make 'sshd restart' work when MPTCP is used, as we will now set this option on the listener socket instead of only the mptcp socket (where it has no effect). We still need to copy the setting to the master socket so that a subsequent getsockopt() returns the expected value. Reported-by:
Christoph Paasch <cpaasch@apple.com> Suggested-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Florian Westphal authored
setsockopt(mptcp_fd, SOL_SOCKET, ...)... appears to work (returns 0), but it has no effect -- this is because the MPTCP layer never has a chance to copy the settings to the subflow socket. Skip the generic handling for the mptcp case and instead call the mptcp specific handler instead for SOL_SOCKET too. Next patch adds more specific handling for SOL_SOCKET to mptcp. Signed-off-by:
-
Tanner Love authored
Before, clang version 9 threw errors such as: error: use of GNU old-style field designator extension [-Werror,-Wgnu-designator] { tstamp: true, swtstamp: true } ^~~~~~~ .tstamp = Fix these warnings in tools/testing/selftests/net in the same manner as commit 121e357a ("selftests/harness: Update named initializer syntax"). N.B. rxtimestamp.c is the only affected file in the directory. Signed-off-by:Tanner Love <tannerlove@google.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
David S. Miller authored
Sudarsana Reddy Kalluru says: ==================== bnx2x: Perform IdleChk dump. Idlechk test verifies that the chip is in idle state. If there are any errors, Idlechk dump would capture the same. This data will help in debugging the device related issues. The patch series adds driver support for dumping IdleChk data during the debug dump collection. Patch (1) adds register definitions required in this implementation. Patch (2) adds the implementation for Idlechk tests. Patch (3) adds driver changes to invoke Idlechk implementation. Changes from previous version: ------------------------------- v3: Combined the test data creation and implementation to a single patch. v2: Addressed issues reported by kernel test robot. ==================== Signed-off-by: -
Sudarsana Reddy Kalluru authored
The patch adds driver changes to perform Idlechk dump during the debug data collection. Signed-off-by:
Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
-
Sudarsana Reddy Kalluru authored
This patch populates a database of idlechk tests (registers and predicates) and performs the idlechk using this data. Signed-off-by:
-
Sudarsana Reddy Kalluru authored
The patch adds register definitions required for Idlechk implementation. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2020-07-04 The following pull-request contains BPF updates for your *net-next* tree. We've added 73 non-merge commits during the last 17 day(s) which contain a total of 106 files changed, 5233 insertions(+), 1283 deletions(-). The main changes are: 1) bpftool ability to show PIDs of processes having open file descriptors for BPF map/program/link/BTF objects, relying on BPF iterator progs to extract this info efficiently, from Andrii Nakryiko. 2) Addition of BPF iterator progs for dumping TCP and UDP sockets to seq_files, from Yonghong Song. 3) Support access to BPF map fields in struct bpf_map from programs through BTF struct access, from Andrey Ignatov. 4) Add a bpf_get_task_stack() helper to be able to dump /proc/*/stack via seq_file from BPF iterator progs, from Song Liu. 5) Make SO_KEEPALIVE and related options available to bpf_setsockopt() helper, from Dmitry Yakunin. 6) Optimize BPF sk_storage selection of its caching index, from Martin KaFai Lau. 7) Removal of redundant synchronize_rcu()s from BPF map destruction which has been a historic leftover, from Alexei Starovoitov. 8) Several improvements to test_progs to make it easier to create a shell loop that invokes each test individually which is useful for some CIs, from Jesper Dangaard Brouer. 9) Fix bpftool prog dump segfault when compiled without skeleton code on older clang versions, from John Fastabend. 10) Bunch of cleanups and minor improvements, from various others. ==================== Signed-off-by:
-
- 03 Jul, 2020 20 commits
-
-
David S. Miller authored
Matteo Croce says: ==================== mvpp2: XDP support Add XDP support to mvpp2. This series converts the driver to the page_pool API for RX buffer management, and adds native XDP support. XDP support comes with extack error reporting and statistics as well. These are the performance numbers, as measured by Sven: SKB fwd page pool: Rx bps 390.38 Mbps Rx pps 762.46 Kpps XDP fwd: Rx bps 1.39 Gbps Rx pps 2.72 Mpps XDP Drop: eth0: 12.9 Mpps eth1: 4.1 Mpps ==================== Signed-off-by: -
Sven Auhagen authored
Add ethtool statistics for XDP. Signed-off-by:
Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by:
-
Matteo Croce authored
Add the transmit part of XDP support, which includes: - support for XDP_TX in mvpp2_xdp() - .ndo_xdp_xmit hook for AF_XDP and XDP_REDIRECT with mvpp2 as destination mvpp2_xdp_submit_frame() is a generic function which is called by mvpp2_xdp_xmit_back() when doing XDP_TX, and by mvpp2_xdp_xmit when doing AF_XDP or XDP_REDIRECT target. The buffer allocation has been reworked to be able to map the buffers as DMA_FROM_DEVICE or DMA_BIDIRECTIONAL depending if native XDP is in use or not. Co-developed-by:
Matteo Croce <mcroce@microsoft.com> Signed-off-by:
-
Matteo Croce authored
Add XDP native support. By now only XDP_DROP, XDP_PASS and XDP_REDIRECT verdicts are supported. Co-developed-by:
-
Matteo Croce authored
Use the page_pool API for memory management. This is a prerequisite for native XDP support. Tested-by:
-
Matteo Croce authored
In mvpp2_swf_bm_pool_init_percpu(), a reference to a struct mvpp2_bm_pool is obtained traversing multiple structs, when a local variable already points to the same object. Fix it and, while at it, give the variable a meaningful name. Signed-off-by:
-
tannerlove authored
Add the options --ipv4, --ipv6 to specify running over ipv4 and/or ipv6. If neither is specified, then run both. Signed-off-by:
-
David S. Miller authored
Alex Elder says: ==================== net: ipa: fix HOLB timer register use The function ipa_reg_init_hol_block_timer_val() generates the value to write into the HOL_BLOCK_TIMER endpoint configuration register, to represent a given timeout value (in microseconds). It only supports a timer value of 0 though, in part because that's sufficient, but mainly because there was some confusion about how the register is formatted in newer hardware. I got clarification about the register format, so this series fixes ipa_reg_init_hol_block_timer_val() to work for any supported delay value. The delay is based on the IPA core clock, so determining the value to write for a given period requires access to the current core clock rate. So the first patch just creates a new function to provide that. ==================== Signed-off-by: -
Alex Elder authored
For IPA v4.2, the exact interpretation of the register that defines the timeout for avoiding head-of-line blocking was a little unclear. We're only assigning a 0 timeout to it right now, so that wasn't very important. But now that I know how it's supposed to work, I'm fixing it. The register represents a tick counter, where each tick is equal to 128 IPA core clock cycles. For IPA v3.5.1, the register contains a simple counter value. But for IPA v4.2, the register contains two fields, base and scale, which approximate the tick counter as: ticks = base << scale The base and scale values to use for a given tick count are computed using clever bit operations, and measures are taken to make the resulting time period as close as possible to that requested. There's no need for ipa_endpoint_init_hol_block_timer() to return an error, so change its return type to void. Signed-off-by:Alex Elder <elder@linaro.org> Signed-off-by:
-
Alex Elder authored
Create a new function that returns the current rate of the IPA core clock. Signed-off-by:
-
Willem de Bruijn authored
IPv6 ping sockets route based on fwmark, but do not yet set skb->mark. Add this. IPv4 ping sockets also do both. Signed-off-by:
-
Song Liu authored
BPF selftests show a compilation error as follows: libbpf: invalid relo for 'entries' in special section 0xfff2; forgot to initialize global var?.. Fix it by initializing 'entries' to zeros. Fixes: c7568114 ("selftests/bpf: Add bpf_iter test with bpf_get_task_stack()") Reported-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200703181719.3747072-1-songliubraving@fb.com
-
John Fastabend authored
Fix segfault from bpftool by adding emit_obj_refs_plain when skeleton code is disabled. Tested by deleting BUILD_BPF_SKELS in Makefile. We found this doing backports for Cilium when a testing image pulled in latest bpf-next bpftool, but kept using an older clang-7. # ./bpftool prog show Error: bpftool built without PID iterator support 3: cgroup_skb tag 7be49e3934a125ba gpl loaded_at 2020-07-01T08:01:29-0700 uid 0 Segmentation fault Fixes: d53dee3f ("tools/bpftool: Show info for processes holding BPF map/prog/link/btf FDs") Reported-by:Joe Stringer <joe@wand.net.nz> Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/159375071997.14984.17404504293832961401.stgit@john-XPS-13-9370
-
Daniel Drown authored
This adds kernel TX timestamps to the xen-netfront driver. Tested with chrony on an AWS EC2 instance. Signed-off-by:
Daniel Drown <dan-netdev@drown.org> Signed-off-by:
-
Florian Fainelli authored
The GENET driver interfaces with internal MoCA interface as well as external MoCA chips like the BCM6802/6803 through a fixed link interface. It is desirable for the mocad user-space daemon to be able to control the carrier state based upon out of band messages that it receives from the MoCA chip. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5-updates-2020-07-02 Rx and Tx devlink health reporters enhancements. 1) Code cleanup 2) devlink output format improvements 3) Print more useful info on devlink health diagnose output 4) TX timeout recovery, on a single SQ recover failure, stop the loop and reset all rings (re-open netdev). ==================== Signed-off-by: -
Aya Levin authored
Upon a TX timeout handle, if the TX reporter was not able to recover from the error, reopen the channels. If tried to reopen channels, do not loop over TX queues for timeout. With that, the reporters state and separation will better expose the driver's state. Signed-off-by:
Aya Levin <ayal@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Aya Levin authored
When the RQ is in striding RQ mode, it uses the ICOSQ as a helper queue. In this mode, RX reporter dumps more info about the ICOSQ and its related CQ. $ devlink health diagnose pci/0000:00:0b.0 reporter rx Common config: RQ: type: 2 stride size: 2048 size: 8 CQ: stride size: 64 size: 1024 RQs: channel ix: 0 rqn: 2413 HW state: 1 SW state: 5 WQE counter: 7 posted WQEs: 7 cc: 7 CQ: cqn: 1032 HW status: 0 ci: 0 size: 1024 EQ: eqn: 7 irqn: 42 vecidx: 1 ci: 93 size: 2048 ICOSQ: sqn: 2411 HW state: 1 cc: 74 pc: 74 WQE size: 128 CQ: cqn: 1029 cc: 8 size: 128 channel ix: 1 rqn: 2418 HW state: 1 SW state: 5 WQE counter: 7 posted WQEs: 7 cc: 7 CQ: cqn: 1036 HW status: 0 ci: 0 size: 1024 EQ: eqn: 8 irqn: 43 vecidx: 2 ci: 2 size: 2048 ICOSQ: sqn: 2416 HW state: 1 cc: 74 pc: 74 WQE size: 128 CQ: cqn: 1033 cc: 8 size: 128 Signed-off-by: -
Aya Levin authored
Enhance TX/RX reporter's diagnose to include info about the corresponding EQ. $ devlink health diagnose pci/0000:00:0b.0 reporter rx Common config: RQ: type: 2 stride size: 2048 size: 8 CQ: stride size: 64 size: 1024 RQs: channel ix: 0 rqn: 1713 HW state: 1 SW state: 5 WQE counter: 7 posted WQEs: 7 cc: 7 ICOSQ HW state: 1 CQ: cqn: 1032 HW status: 0 ci: 0 size: 1024 EQ: eqn: 7 irqn: 42 vecidx: 1 ci: 93 size: 2048 channel ix: 1 rqn: 1718 HW state: 1 SW state: 5 WQE counter: 7 posted WQEs: 7 cc: 7 ICOSQ HW state: 1 CQ: cqn: 1036 HW status: 0 ci: 0 size: 1024 EQ: eqn: 8 irqn: 43 vecidx: 2 ci: 2 size: 2048 $ devlink health diagnose pci/0000:00:0b.0 reporter tx Common Config: SQ: stride size: 64 size: 1024 CQ: stride size: 64 size: 1024 SQs: channel ix: 0 tc: 0 txq ix: 0 sqn: 1712 HW state: 1 stopped: false cc: 91 pc: 91 CQ: cqn: 1030 HW status: 0 ci: 91 size: 1024 EQ: eqn: 7 irqn: 42 vecidx: 1 ci: 93 size: 2048 channel ix: 1 tc: 0 txq ix: 1 sqn: 1717 HW state: 1 stopped: false cc: 0 pc: 0 CQ: cqn: 1034 HW status: 0 ci: 0 size: 1024 EQ: eqn: 8 irqn: 43 vecidx: 2 ci: 2 size: 2048 Signed-off-by:Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Aya Levin authored
Add CQ's consumer index and size to the CQ's diagnose output retruved on RX/TX reporter diadgnose. $ devlink health diagnose pci/0000:00:0b.0 reporter rx Common config: RQ: type: 2 stride size: 2048 size: 8 CQ: stride size: 64 size: 1024 RQs: channel ix: 0 rqn: 2413 HW state: 1 SW state: 5 WQE counter: 7 posted WQEs: 7 cc: 7 ICOSQ HW state: 1 CQ: cqn: 1032 HW status: 0 ci: 0 size: 1024 channel ix: 1 rqn: 2418 HW state: 1 SW state: 5 WQE counter: 7 posted WQEs: 7 cc: 7 ICOSQ HW state: 1 CQ: cqn: 1036 HW status: 0 ci: 0 size: 1024 $ devlink health diagnose pci/0000:00:0b.0 reporter tx Common Config: SQ: stride size: 64 size: 1024 CQ: stride size: 64 size: 1024 SQs: channel ix: 0 tc: 0 txq ix: 0 sqn: 2412 HW state: 1 stopped: false cc: 0 pc: 0 CQ: cqn: 1030 HW status: 0 ci: 0 size: 1024 channel ix: 1 tc: 0 txq ix: 1 sqn: 2417 HW state: 1 stopped: false cc: 5 pc: 5 CQ: cqn: 1034 HW status: 0 ci: 5 size: 1024 Signed-off-by:
-
