- 08 Dec, 2021 10 commits
-
-
Joakim Zhang authored
Background: We have a customer is running a Profinet stack on the 8MM which receives and responds PNIO packets every 4ms and PNIO-CM packets every 40ms. However, from time to time the received PNIO-CM package is "stock" and is only handled when receiving a new PNIO-CM or DCERPC-Ping packet (tcpdump shows the PNIO-CM and the DCERPC-Ping packet at the same time but the PNIO-CM HW timestamp is from the expected 40 ms and not the 2s delay of the DCERPC-Ping). After debugging, we noticed PNIO, PNIO-CM and DCERPC-Ping packets would be handled by different RX queues. The root cause should be driver ack all queues' interrupt when handle a specific queue in fec_enet_rx_queue(). The blamed patch is introduced to receive as much packets as possible once to avoid interrupt flooding. But it's unreasonable to clear other queues'interrupt when handling one queue, this patch tries to fix it. Fixes: ed63f1dc (net: fec: clear receive interrupts before processing a packet) Cc: Russell King <rmk+kernel@arm.linux.org.uk> Reported-by: Nicolas Diaz <nicolas.diaz@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20211206135457.15946-1-qiangqing.zhang@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-12-06 This series contains updates to iavf and i40e drivers. Mitch adds restoration of MSI state during reset for iavf. Michal fixes checking and reporting of descriptor count changes to communicate changes and/or issues for iavf. Karen resolves an issue with failed handling of VF requests while a VF reset is occurring for i40e. Mateusz removes clearing of VF requested queue count when configuring VF ADQ for i40e. Norbert fixes a NULL pointer dereference that can occur when getting VSI descriptors for i40e. ==================== Link: https://lore.kernel.org/r/20211206183519.2733180-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Yanteng Si says: ==================== net: phy: Fix doc build warnings ==================== Link: https://lore.kernel.org/r/cover.1638776933.git.siyanteng@loongson.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Yanteng Si authored
Fix warning as: Documentation/networking/kapi:147: ./drivers/net/phy/phylink.c:1657: WARNING: Unexpected indentation. Documentation/networking/kapi:147: ./drivers/net/phy/phylink.c:1658: WARNING: Block quote ends without a blank line; unexpected unindent. Signed-off-by: Yanteng Si <siyanteng@loongson.cn> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Yanteng Si authored
Fix warning as: linux-next/Documentation/networking/kapi:122: ./include/linux/phy.h:543: WARNING: Unexpected indentation. linux-next/Documentation/networking/kapi:122: ./include/linux/phy.h:544: WARNING: Block quote ends without a blank line; unexpected unindent. linux-next/Documentation/networking/kapi:122: ./include/linux/phy.h:546: WARNING: Unexpected indentation. Suggested-by: Akira Yokosawa <akiyks@gmail.com> Signed-off-by: Yanteng Si <siyanteng@loongson.cn> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Ameer Hamza authored
Avoid passing NULL skb to __skb_put() function call if napi_alloc_skb() returns NULL. Fixes: 37149e93 ("gve: Implement packet continuation for RX.") Signed-off-by: Ameer Hamza <amhamza.mgc@gmail.com> Link: https://lore.kernel.org/r/20211205183810.8299-1-amhamza.mgc@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Petr Machata authored
Jiri has moved on and will not carry out the mlxsw maintainership duty any longer. Add myself as a co-maintainer instead. Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/45b54312cdebaf65c5d110b15a5dd2df795bf2be.1638807297.git.petrm@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Vadim Fedorenko says: ==================== net: tls: cover all ciphers with tests Recent patches to Kernel TLS showed that some ciphers are not covered with tests. Let's cover missed. ==================== Link: https://lore.kernel.org/r/20211206213932.7508-1-vfedorenko@novek.ruSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Vadim Fedorenko authored
Add tests for TLSv1.2 and TLSv1.3 with AES256-GCM cipher Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Vadim Fedorenko authored
Add tests for TLSv1.2 and TLSv1.3 with AES-CCM cipher. Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 07 Dec, 2021 13 commits
-
-
Dan Carpenter authored
The ql_wait_for_drvr_lock() fails and returns false, then this function should return an error code instead of returning success. The other problem is that the success path prints an error message netdev_err(ndev, "Releasing driver lock\n"); Delete that and re-order the code a little to make it more clear. Fixes: 5a4faa87 ("[PATCH] qla3xxx NIC driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20211207082416.GA16110@kiliSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Merge tag 'linux-can-fixes-for-5.16-20211207' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== can 2021-12-07 The 1st patch is by Vincent Mailhol and fixes a use after free in the pch_can driver. Dan Carpenter fixes a use after free in the ems_pcmcia sja1000 driver. The remaining 7 patches target the m_can driver. Brian Silverman contributes a patch to disable and ignore the ELO interrupt, which is currently not handled in the driver and may lead to an interrupt storm. Vincent Mailhol's patch fixes a memory leak in the error path of the m_can_read_fifo() function. The remaining patches are contributed by Matthias Schiffer, first a iomap_read_fifo() and iomap_write_fifo() functions are fixed in the PCI glue driver, then the clock rate for the Intel Ekhart Lake platform is fixed, the last 3 patches add support for the custom bit timings on the Elkhart Lake platform. * tag 'linux-can-fixes-for-5.16-20211207' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: m_can: pci: use custom bit timings for Elkhart Lake can: m_can: make custom bittiming fields const Revert "can: m_can: remove support for custom bit timing" can: m_can: pci: fix incorrect reference clock rate can: m_can: pci: fix iomap_read_fifo() and iomap_write_fifo() can: m_can: m_can_read_fifo: fix memory leak in error branch can: m_can: Disable and ignore ELO interrupt can: sja1000: fix use after free in ems_pcmcia_add_card() can: pch_can: pch_can_rx_normal: fix use after free ==================== Link: https://lore.kernel.org/r/20211207102420.120131-1-mkl@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Matthias Schiffer authored
The relevant datasheet [1] specifies nonstandard limits for the bit timing parameters. While it is unclear what the exact effect of violating these limits is, it seems like a good idea to adhere to the documentation. [1] Intel Atom
® x6000E Series, and Intel® Pentium® and Celeron® N and J Series Processors for IoT Applications Datasheet, Volume 2 (Book 3 of 3), July 2021, Revision 001 Fixes: cab7ffc0 ("can: m_can: add PCI glue driver for Intel Elkhart Lake") Link: https://lore.kernel.org/all/9eba5d7c05a48ead4024ffa6e5926f191d8c6b38.1636967198.git.matthias.schiffer@ew.tq-group.comSigned-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> -
Matthias Schiffer authored
The assigned timing structs will be defined a const anyway, so we can avoid a few casts by declaring the struct fields as const as well. Link: https://lore.kernel.org/all/4508fa4e639164b2584c49a065d90c78a91fa568.1636967198.git.matthias.schiffer@ew.tq-group.comSigned-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
Matthias Schiffer authored
The timing limits specified by the Elkhart Lake CPU datasheets do not match the defaults. Let's reintroduce the support for custom bit timings. This reverts commit 0ddd83fb. Link: https://lore.kernel.org/all/00c9e2596b1a548906921a574d4ef7a03c0dace0.1636967198.git.matthias.schiffer@ew.tq-group.comSigned-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
Matthias Schiffer authored
When testing the CAN controller on our Ekhart Lake hardware, we determined that all communication was running with twice the configured bitrate. Changing the reference clock rate from 100MHz to 200MHz fixed this. Intel's support has confirmed to us that 200MHz is indeed the correct clock rate. Fixes: cab7ffc0 ("can: m_can: add PCI glue driver for Intel Elkhart Lake") Link: https://lore.kernel.org/all/c9cf3995f45c363e432b3ae8eb1275e54f009fc8.1636967198.git.matthias.schiffer@ew.tq-group.com Cc: stable@vger.kernel.org Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
Matthias Schiffer authored
The same fix that was previously done in m_can_platform in commit 99d173fb ("can: m_can: fix iomap_read_fifo() and iomap_write_fifo()") is required in m_can_pci as well to make iomap_read_fifo() and iomap_write_fifo() work for val_count > 1. Fixes: 812270e5 ("can: m_can: Batch FIFO writes during CAN transmit") Fixes: 1aa6772f ("can: m_can: Batch FIFO reads during CAN receive") Link: https://lore.kernel.org/all/20211118144011.10921-1-matthias.schiffer@ew.tq-group.com Cc: stable@vger.kernel.org Cc: Matt Kline <matt@bitbashing.io> Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
Vincent Mailhol authored
In m_can_read_fifo(), if the second call to m_can_fifo_read() fails, the function jump to the out_fail label and returns without calling m_can_receive_skb(). This means that the skb previously allocated by alloc_can_skb() is not freed. In other terms, this is a memory leak. This patch adds a goto label to destroy the skb if an error occurs. Issue was found with GCC -fanalyzer, please follow the link below for details. Fixes: e3938177 ("can: m_can: Disable IRQs on FIFO bus errors") Link: https://lore.kernel.org/all/20211107050755.70655-1-mailhol.vincent@wanadoo.fr Cc: stable@vger.kernel.org Cc: Matt Kline <matt@bitbashing.io> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
Brian Silverman authored
With the design of this driver, this condition is often triggered. However, the counter that this interrupt indicates an overflow is never read either, so overflowing is harmless. On my system, when a CAN bus starts flapping up and down, this locks up the whole system with lots of interrupts and printks. Specifically, this interrupt indicates the CEL field of ECR has overflowed. All reads of ECR mask out CEL. Fixes: e0d1f481 ("can: m_can: add Bosch M_CAN controller support") Link: https://lore.kernel.org/all/20211129222628.7490-1-brian.silverman@bluerivertech.com Cc: stable@vger.kernel.org Signed-off-by: Brian Silverman <brian.silverman@bluerivertech.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
Dan Carpenter authored
If the last channel is not available then "dev" is freed. Fortunately, we can just use "pdev->irq" instead. Also we should check if at least one channel was set up. Fixes: fd734c6f ("can/sja1000: add driver for EMS PCMCIA card") Link: https://lore.kernel.org/all/20211124145041.GB13656@kili Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
Vincent Mailhol authored
After calling netif_receive_skb(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is dereferenced just after the call netif_receive_skb(skb). Reordering the lines solves the issue. Fixes: b21d18b5 ("can: Topcliff: Add PCH_CAN driver.") Link: https://lore.kernel.org/all/20211123111654.621610-1-mailhol.vincent@wanadoo.fr Cc: stable@vger.kernel.org Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
Eric Dumazet authored
While preparing my patch series adding netns refcount tracking, I spotted bugs in devlink_nl_cmd_reload() Some error paths forgot to release a refcount on a netns. To fix this, we can reduce the scope of get_net()/put_net() section around the call to devlink_reload(). Fixes: ccdf0721 ("devlink: Add reload action option to devlink reload command") Fixes: dc64cc7c ("devlink: Add devlink reload limit option") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Moshe Shemesh <moshe@mellanox.com> Cc: Jacob Keller <jacob.e.keller@intel.com> Cc: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20211205192822.1741045-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Antoine Tenart authored
There is a short period between a net device starts to be unregistered and when it is actually gone. In that time frame ethtool operations could still be performed, which might end up in unwanted or undefined behaviours[1]. Do not allow ethtool operations after a net device starts its unregistration. This patch targets the netlink part as the ioctl one isn't affected: the reference to the net device is taken and the operation is executed within an rtnl lock section and the net device won't be found after unregister. [1] For example adding Tx queues after unregister ends up in NULL pointer exceptions and UaFs, such as: BUG: KASAN: use-after-free in kobject_get+0x14/0x90 Read of size 1 at addr ffff88801961248c by task ethtool/755 CPU: 0 PID: 755 Comm: ethtool Not tainted 5.15.0-rc6+ #778 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/014 Call Trace: dump_stack_lvl+0x57/0x72 print_address_description.constprop.0+0x1f/0x140 kasan_report.cold+0x7f/0x11b kobject_get+0x14/0x90 kobject_add_internal+0x3d1/0x450 kobject_init_and_add+0xba/0xf0 netdev_queue_update_kobjects+0xcf/0x200 netif_set_real_num_tx_queues+0xb4/0x310 veth_set_channels+0x1c3/0x550 ethnl_set_channels+0x524/0x610 Fixes: 041b1c5d ("ethtool: helper functions for netlink interface") Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Antoine Tenart <atenart@kernel.org> Link: https://lore.kernel.org/r/20211203101318.435618-1-atenart@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 06 Dec, 2021 4 commits
-
-
Norbert Zulinski authored
When trying to dump VFs VSI RX/TX descriptors using debugfs there was a crash due to NULL pointer dereference in i40e_dbg_dump_desc. Added a check to i40e_dbg_dump_desc that checks if VSI type is correct for dumping RX/TX descriptors. Fixes: 02e9c290 ("i40e: debugfs interface") Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Mateusz Palczewski authored
After setting pre-set combined to 16 queues and reserving 16 queues by tc qdisc, pre-set maximum combined queues returned to default value after VF reset being 4 and this generated errors during removing tc. Fixed by removing clear num_req_queues before reset VF. Fixes: e284fc28 (i40e: Add and delete cloud filter) Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Bindushree P <Bindushree.p@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Karen Sornek authored
Fix failed operation code appearing if handling messages from VF. Implemented by waiting for VF appropriate state if request starts handle while VF reset. Without this patch the message handling request while VF is in a reset state ends with error -5 (I40E_ERR_PARAM). Fixes: 5c3c48ac ("i40e: implement virtual device interface") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Karen Sornek <karen.sornek@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Michal Maloszewski authored
iavf_set_ringparams doesn't communicate to the user that 1. The user requested descriptor count is out of range. Instead it just quietly sets descriptors to the "clamped" value and calls it done. This makes it look an invalid value was successfully set as the descriptor count when this isn't actually true. 2. The user provided descriptor count needs to be inflated for alignment reasons. This behavior is confusing. The ice driver has already addressed this by rejecting invalid values for descriptor count and messaging for alignment adjustments. Do the same thing here by adding the error and info messages. Fixes: fbb7ddfe ("i40evf: core ethtool functionality") Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
- 04 Dec, 2021 2 commits
-
-
Lee Jones authored
Currently, due to the sequential use of min_t() and clamp_t() macros, in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is not set, the logic sets tx_max to 0. This is then used to allocate the data area of the SKB requested later in cdc_ncm_fill_tx_frame(). This does not cause an issue presently because when memory is allocated during initialisation phase of SKB creation, more memory (512b) is allocated than is required for the SKB headers alone (320b), leaving some space (512b - 320b = 192b) for CDC data (172b). However, if more elements (for example 3 x u64 = [24b]) were added to one of the SKB header structs, say 'struct skb_shared_info', increasing its original size (320b [320b aligned]) to something larger (344b [384b aligned]), then suddenly the CDC data (172b) no longer fits in the spare SKB data area (512b - 384b = 128b). Consequently the SKB bounds checking semantics fails and panics: skbuff: skb_over_panic: text:ffffffff830a5b5f len:184 put:172 \ head:ffff888119227c00 data:ffff888119227c00 tail:0xb8 end:0x80 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:110! RIP: 0010:skb_panic+0x14f/0x160 net/core/skbuff.c:106 <snip> Call Trace: <IRQ> skb_over_panic+0x2c/0x30 net/core/skbuff.c:115 skb_put+0x205/0x210 net/core/skbuff.c:1877 skb_put_zero include/linux/skbuff.h:2270 [inline] cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1116 [inline] cdc_ncm_fill_tx_frame+0x127f/0x3d50 drivers/net/usb/cdc_ncm.c:1293 cdc_ncm_tx_fixup+0x98/0xf0 drivers/net/usb/cdc_ncm.c:1514 By overriding the max value with the default CDC_NCM_NTB_MAX_SIZE_TX when not offered through the system provided params, we ensure enough data space is allocated to handle the CDC data, meaning no crash will occur. Cc: Oliver Neukum <oliver@neukum.org> Fixes: 289507d3 ("net: cdc_ncm: use sysfs for rx/tx aggregation tuning") Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20211202143437.1411410-1-lee.jones@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Manish Chopra authored
Although it is unlikely that stack could transmit a non LSO skb with length > MTU, however in some cases or environment such occurrences actually resulted into firmware asserts due to packet length being greater than the max supported by the device (~9700B). This patch adds the safeguard for such odd cases to avoid firmware asserts. v2: Added "Fixes" tag with one of the initial driver commit which enabled the TX traffic actually (as this was probably day1 issue which was discovered recently by some customer environment) Fixes: a2ec6172 ("qede: Add support for link") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Alok Prasad <palok@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Link: https://lore.kernel.org/r/20211203174413.13090-1-manishc@marvell.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 03 Dec, 2021 10 commits
-
-
Dan Carpenter authored
There are two error paths which accidentally return success instead of a negative error code. Fixes: bbd2190c ("Altera TSE: Add main and header file for Altera Ethernet Driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiasheng Jiang authored
The return value of dma_set_coherent_mask() is not always 0. To catch the exception in case that dma is not support the mask. Fixes: 9d61d138 ("net: broadcom: rename BCM4908 driver & update DT binding") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Li Zhijian authored
Previously, the selftest framework always treats it as *ok* even though some of them are failed actually. That's because the script always returns 0. It supports PASS/FAIL/SKIP exit code now. CC: Philip Li <philip.li@intel.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Li Zhijian <zhijianx.li@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
KCSAN reported a data-race [1] around tx_rebalance_counter which can be accessed from different contexts, without the protection of a lock/mutex. [1] BUG: KCSAN: data-race in bond_alb_init_slave / bond_alb_monitor write to 0xffff888157e8ca24 of 4 bytes by task 7075 on cpu 0: bond_alb_init_slave+0x713/0x860 drivers/net/bonding/bond_alb.c:1613 bond_enslave+0xd94/0x3010 drivers/net/bonding/bond_main.c:1949 do_set_master net/core/rtnetlink.c:2521 [inline] __rtnl_newlink net/core/rtnetlink.c:3475 [inline] rtnl_newlink+0x1298/0x13b0 net/core/rtnetlink.c:3506 rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5571 netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2491 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5589 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x5fc/0x6c0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x6e1/0x7d0 net/netlink/af_netlink.c:1916 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg net/socket.c:724 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2409 ___sys_sendmsg net/socket.c:2463 [inline] __sys_sendmsg+0x195/0x230 net/socket.c:2492 __do_sys_sendmsg net/socket.c:2501 [inline] __se_sys_sendmsg net/socket.c:2499 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2499 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888157e8ca24 of 4 bytes by task 1082 on cpu 1: bond_alb_monitor+0x8f/0xc00 drivers/net/bonding/bond_alb.c:1511 process_one_work+0x3fc/0x980 kernel/workqueue.c:2298 worker_thread+0x616/0xa70 kernel/workqueue.c:2445 kthread+0x2c7/0x2e0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 value changed: 0x00000001 -> 0x00000064 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 1082 Comm: kworker/u4:3 Not tainted 5.16.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: bond1 bond_alb_monitor Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
KMSAN is still not happy [1]. I missed that passive connections do not inherit their sk_rx_queue_mapping values from the request socket, but instead tcp_child_process() is calling sk_mark_napi_id(child, skb) We have many sk_mark_napi_id() callers, so I am providing a new helper, forcing the setting sk_rx_queue_mapping and sk_napi_id. Note that we had no KMSAN report for sk_napi_id because passive connections got a copy of this field from the listener. sk_rx_queue_mapping in the other hand is inside the sk_dontcopy_begin/sk_dontcopy_end so sk_clone_lock() leaves this field uninitialized. We might remove dead code populating req->sk_rx_queue_mapping in the future. [1] BUG: KMSAN: uninit-value in __sk_rx_queue_set include/net/sock.h:1924 [inline] BUG: KMSAN: uninit-value in sk_rx_queue_update include/net/sock.h:1938 [inline] BUG: KMSAN: uninit-value in sk_mark_napi_id include/net/busy_poll.h:136 [inline] BUG: KMSAN: uninit-value in tcp_child_process+0xb42/0x1050 net/ipv4/tcp_minisocks.c:833 __sk_rx_queue_set include/net/sock.h:1924 [inline] sk_rx_queue_update include/net/sock.h:1938 [inline] sk_mark_napi_id include/net/busy_poll.h:136 [inline] tcp_child_process+0xb42/0x1050 net/ipv4/tcp_minisocks.c:833 tcp_v4_rcv+0x3d83/0x4ed0 net/ipv4/tcp_ipv4.c:2066 ip_protocol_deliver_rcu+0x760/0x10b0 net/ipv4/ip_input.c:204 ip_local_deliver_finish net/ipv4/ip_input.c:231 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] ip_local_deliver+0x584/0x8c0 net/ipv4/ip_input.c:252 dst_input include/net/dst.h:460 [inline] ip_sublist_rcv_finish net/ipv4/ip_input.c:551 [inline] ip_list_rcv_finish net/ipv4/ip_input.c:601 [inline] ip_sublist_rcv+0x11fd/0x1520 net/ipv4/ip_input.c:609 ip_list_rcv+0x95f/0x9a0 net/ipv4/ip_input.c:644 __netif_receive_skb_list_ptype net/core/dev.c:5505 [inline] __netif_receive_skb_list_core+0xe34/0x1240 net/core/dev.c:5553 __netif_receive_skb_list+0x7fc/0x960 net/core/dev.c:5605 netif_receive_skb_list_internal+0x868/0xde0 net/core/dev.c:5696 gro_normal_list net/core/dev.c:5850 [inline] napi_complete_done+0x579/0xdd0 net/core/dev.c:6587 virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline] virtnet_poll+0x17b6/0x2350 drivers/net/virtio_net.c:1557 __napi_poll+0x14e/0xbc0 net/core/dev.c:7020 napi_poll net/core/dev.c:7087 [inline] net_rx_action+0x824/0x1880 net/core/dev.c:7174 __do_softirq+0x1fe/0x7eb kernel/softirq.c:558 run_ksoftirqd+0x33/0x50 kernel/softirq.c:920 smpboot_thread_fn+0x616/0xbf0 kernel/smpboot.c:164 kthread+0x721/0x850 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 Uninit was created at: __alloc_pages+0xbc7/0x10a0 mm/page_alloc.c:5409 alloc_pages+0x8a5/0xb80 alloc_slab_page mm/slub.c:1810 [inline] allocate_slab+0x287/0x1c20 mm/slub.c:1947 new_slab mm/slub.c:2010 [inline] ___slab_alloc+0xbdf/0x1e90 mm/slub.c:3039 __slab_alloc mm/slub.c:3126 [inline] slab_alloc_node mm/slub.c:3217 [inline] slab_alloc mm/slub.c:3259 [inline] kmem_cache_alloc+0xbb3/0x11c0 mm/slub.c:3264 sk_prot_alloc+0xeb/0x570 net/core/sock.c:1914 sk_clone_lock+0xd6/0x1940 net/core/sock.c:2118 inet_csk_clone_lock+0x8d/0x6a0 net/ipv4/inet_connection_sock.c:956 tcp_create_openreq_child+0xb1/0x1ef0 net/ipv4/tcp_minisocks.c:453 tcp_v4_syn_recv_sock+0x268/0x2710 net/ipv4/tcp_ipv4.c:1563 tcp_check_req+0x207c/0x2a30 net/ipv4/tcp_minisocks.c:765 tcp_v4_rcv+0x36f5/0x4ed0 net/ipv4/tcp_ipv4.c:2047 ip_protocol_deliver_rcu+0x760/0x10b0 net/ipv4/ip_input.c:204 ip_local_deliver_finish net/ipv4/ip_input.c:231 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] ip_local_deliver+0x584/0x8c0 net/ipv4/ip_input.c:252 dst_input include/net/dst.h:460 [inline] ip_sublist_rcv_finish net/ipv4/ip_input.c:551 [inline] ip_list_rcv_finish net/ipv4/ip_input.c:601 [inline] ip_sublist_rcv+0x11fd/0x1520 net/ipv4/ip_input.c:609 ip_list_rcv+0x95f/0x9a0 net/ipv4/ip_input.c:644 __netif_receive_skb_list_ptype net/core/dev.c:5505 [inline] __netif_receive_skb_list_core+0xe34/0x1240 net/core/dev.c:5553 __netif_receive_skb_list+0x7fc/0x960 net/core/dev.c:5605 netif_receive_skb_list_internal+0x868/0xde0 net/core/dev.c:5696 gro_normal_list net/core/dev.c:5850 [inline] napi_complete_done+0x579/0xdd0 net/core/dev.c:6587 virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline] virtnet_poll+0x17b6/0x2350 drivers/net/virtio_net.c:1557 __napi_poll+0x14e/0xbc0 net/core/dev.c:7020 napi_poll net/core/dev.c:7087 [inline] net_rx_action+0x824/0x1880 net/core/dev.c:7174 __do_softirq+0x1fe/0x7eb kernel/softirq.c:558 Fixes: 342159ee ("net: avoid dirtying sk->sk_rx_queue_mapping") Fixes: a37a0ee4 ("net: avoid uninit-value from tcp_conn_request") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Tested-by: Alexander Potapenko <glider@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Since commit 4e1beecc ("net/sock: Add kernel config SOCK_RX_QUEUE_MAPPING"), sk_rx_queue_mapping access is guarded by CONFIG_SOCK_RX_QUEUE_MAPPING. Fixes: 54b92e84 ("tcp: Migrate TCP_ESTABLISHED/TCP_SYN_RECV sockets in accept queues.") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Tariq Toukan <tariqt@nvidia.com> Acked-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Li Zhijian authored
Install netdevsim to provide /sys/bus/netdevsim/new_device interface. It helps to fix: # ok 97 9a7d - Change ETS strict band without quantum # skipped - skipped - previous setup failed 11 ce7d # # # -----> prepare stage *** Could not execute: "echo "1 1 4" > /sys/bus/netdevsim/new_device" # # -----> prepare stage *** Error message: "/bin/sh: 1: cannot create /sys/bus/netdevsim/new_device: Directory nonexistent # " # # -----> prepare stage *** Aborting test run. # # # <_io.BufferedReader name=5> *** stdout *** # Signed-off-by: Li Zhijian <zhijianx.li@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Li Zhijian authored
qdiscs/fq_pie requires CONFIG_NET_SCH_FQ_PIE, otherwise tc will fail to create a fq_pie qdisc. It fixes following issue: # not ok 57 83be - Create FQ-PIE with invalid number of flows # Command exited with 2, expected 0 # Error: Specified qdisc not found. Signed-off-by: Li Zhijian <zhijianx.li@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Li Zhijian authored
Mark the summary result as FAIL to prevent from confusing the selftest framework if some of them are failed. Previously, the selftest framework always treats it as *ok* even though some of them are failed actually. That's because the script tdc.sh always return 0. # All test results: # # 1..97 # ok 1 83be - Create FQ-PIE with invalid number of flows # ok 2 8b6e - Create RED with no flags [...snip] # ok 6 5f15 - Create RED with flags ECN, harddrop # ok 7 53e8 - Create RED with flags ECN, nodrop # ok 8 d091 - Fail to create RED with only nodrop flag # ok 9 af8e - Create RED with flags ECN, nodrop, harddrop # not ok 10 ce7d - Add mq Qdisc to multi-queue device (4 queues) # Could not match regex pattern. Verify command output: # qdisc mq 1: root # qdisc fq_codel 0: parent 1:4 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64 # qdisc fq_codel 0: parent 1:3 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64 [...snip] # ok 96 6979 - Change quantum of a strict ETS band # ok 97 9a7d - Change ETS strict band without quantum # # # # ok 1 selftests: tc-testing: tdc.sh <<< summary result CC: Philip Li <philip.li@intel.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Li Zhijian <zhijianx.li@intel.com> Acked-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Peilin Ye authored
Currently rp_filter tests in fib_tests.sh:fib_rp_filter_test() are failing. ping sockets are bound to dummy1 using the "-I" option (SO_BINDTODEVICE), but socket lookup is failing when receiving ping replies, since the routing table thinks they belong to dummy0. For example, suppose ping is using a SOCK_RAW socket for ICMP messages. When receiving ping replies, in __raw_v4_lookup(), sk->sk_bound_dev_if is 3 (dummy1), but dif (skb_rtable(skb)->rt_iif) says 2 (dummy0), so the raw_sk_bound_dev_eq() check fails. Similar things happen in ping_lookup() for SOCK_DGRAM sockets. These tests used to pass due to a bug [1] in iputils, where "ping -I" actually did not bind ICMP message sockets to device. The bug has been fixed by iputils commit f455fee41c07 ("ping: also bind the ICMP socket to the specific device") in 2016, which is why our rp_filter tests started to fail. See [2] . Fixing the tests while keeping everything in one netns turns out to be nontrivial. Rework the tests and build the following topology: ┌─────────────────────────────┐ ┌─────────────────────────────┐ │ network namespace 1 (ns1) │ │ network namespace 2 (ns2) │ │ │ │ │ │ ┌────┐ ┌─────┐ │ │ ┌─────┐ ┌────┐ │ │ │ lo │<───>│veth1│<────────┼────┼─>│veth2│<──────────>│ lo │ │ │ └────┘ ├─────┴──────┐ │ │ ├─────┴──────┐ └────┘ │ │ │192.0.2.1/24│ │ │ │192.0.2.1/24│ │ │ └────────────┘ │ │ └────────────┘ │ └─────────────────────────────┘ └─────────────────────────────┘ Consider sending an ICMP_ECHO packet A in ns2. Both source and destination IP addresses are 192.0.2.1, and we use strict mode rp_filter in both ns1 and ns2: 1. A is routed to lo since its destination IP address is one of ns2's local addresses (veth2); 2. A is redirected from lo's egress to veth2's egress using mirred; 3. A arrives at veth1's ingress in ns1; 4. A is redirected from veth1's ingress to lo's ingress, again, using mirred; 5. In __fib_validate_source(), fib_info_nh_uses_dev() returns false, since A was received on lo, but reverse path lookup says veth1; 6. However A is not dropped since we have relaxed this check for lo in commit 66f82095 ("fib: relax source validation check for loopback packets"); Making sure A is not dropped here in this corner case is the whole point of having this test. 7. As A reaches the ICMP layer, an ICMP_ECHOREPLY packet, B, is generated; 8. Similarly, B is redirected from lo's egress to veth1's egress (in ns1), then redirected once again from veth2's ingress to lo's ingress (in ns2), using mirred. Also test "ping 127.0.0.1" from ns2. It does not trigger the relaxed check in __fib_validate_source(), but just to make sure the topology works with loopback addresses. Tested with ping from iputils 20210722-41-gf9fb573: $ ./fib_tests.sh -t rp_filter IPv4 rp_filter tests TEST: rp_filter passes local packets [ OK ] TEST: rp_filter passes loopback packets [ OK ] [1] https://github.com/iputils/iputils/issues/55 [2] https://github.com/iputils/iputils/commit/f455fee41c077d4b700a473b2f5b3487b8febc1dReported-by: Hangbin Liu <liuhangbin@gmail.com> Fixes: adb701d6 ("selftests: add a test case for rp_filter") Reviewed-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Acked-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20211201004720.6357-1-yepeilin.cs@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 02 Dec, 2021 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from wireless, and wireguard. Mostly scattered driver changes this week, with one big clump in mv88e6xxx. Nothing of note, really. Current release - regressions: - smc: keep smc_close_final()'s error code during active close Current release - new code bugs: - iwlwifi: various static checker fixes (int overflow, leaks, missing error codes) - rtw89: fix size of firmware header before transfer, avoid crash - mt76: fix timestamp check in tx_status; fix pktid leak; - mscc: ocelot: fix missing unlock on error in ocelot_hwstamp_set() Previous releases - regressions: - smc: fix list corruption in smc_lgr_cleanup_early - ipv4: convert fib_num_tclassid_users to atomic_t Previous releases - always broken: - tls: fix authentication failure in CCM mode - vrf: reset IPCB/IP6CB when processing outbound pkts, prevent incorrect processing - dsa: mv88e6xxx: fixes for various device errata - rds: correct socket tunable error in rds_tcp_tune() - ipv6: fix memory leak in fib6_rule_suppress - wireguard: reset peer src endpoint when netns exits - wireguard: improve resilience to DoS around incoming handshakes - tcp: fix page frag corruption on page fault which involves TCP - mpls: fix missing attributes in delete notifications - mt7915: fix NULL pointer dereference with ad-hoc mode Misc: - rt2x00: be more lenient about EPROTO errors during start - mlx4_en: update reported link modes for 1/10G" * tag 'net-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits) net: dsa: b53: Add SPI ID table gro: Fix inconsistent indenting selftests: net: Correct case name net/rds: correct socket tunable error in rds_tcp_tune() mctp: Don't let RTM_DELROUTE delete local routes net/smc: Keep smc_close_final rc during active close ibmvnic: drop bad optimization in reuse_tx_pools() ibmvnic: drop bad optimization in reuse_rx_pools() net/smc: fix wrong list_del in smc_lgr_cleanup_early Fix Comment of ETH_P_802_3_MIN ethernet: aquantia: Try MAC address from device tree ipv4: convert fib_num_tclassid_users to atomic_t net: avoid uninit-value from tcp_conn_request net: annotate data-races on txq->xmit_lock_owner octeontx2-af: Fix a memleak bug in rvu_mbox_init() net/mlx4_en: Fix an use-after-free bug in mlx4_en_try_alloc_resources() vrf: Reset IPCB/IP6CB when processing outbound pkts in vrf dev xmit net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings() net: dsa: mv88e6xxx: Link in pcs_get_state() if AN is bypassed net: dsa: mv88e6xxx: Fix inband AN for 2500base-x on 88E6393X family ...
-