- 19 Jun, 2024 7 commits
-
-
Alex Hung authored
Integer divisions result in loss of fractional and accuracy is lost when assigned or compared with double. It is necessary to perform double/integer instead or explicitly cast them to double. This fixes 54 UNINTENDED_INTEGER_DIVISION issues reported by Coverity. Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Acked-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
Alex Hung <alex.hung@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Alex Hung authored
resource_get_odm_slice_count and resource_get_otg_master_for_stream can return null, and their returns must be checked before used. This fixes 4 NULL_RETURNS issues reported by Coverity. Reviewed-by:
-
Alex Hung authored
dc_state_get_stream_status dc_state_get_paired_subvp_stream and other functions can return null, and therefore null must be checked before status can be used. This fixes 21 NULL_RETURNS issues reported by Coverity. Reviewed-by:
-
Alvin Lee authored
Need to reconfigure ODM when resyncing FIFO because on OTG disable we clear all ODM programming Reviewed-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by:
Alvin Lee <alvin.lee2@amd.com> Signed-off-by:
-
Rodrigo Siqueira authored
When users run the command: cat /sys/kernel/debug/dri/0/amdgpu_dm_dtn_log The following NULL pointer dereference happens: [ +0.000003] BUG: kernel NULL pointer dereference, address: NULL [ +0.000005] #PF: supervisor instruction fetch in kernel mode [ +0.000002] #PF: error_code(0x0010) - not-present page [ +0.000002] PGD 0 P4D 0 [ +0.000004] Oops: 0010 [#1] PREEMPT SMP NOPTI [ +0.000003] RIP: 0010:0x0 [ +0.000008] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [...] [ +0.000002] PKRU: 55555554 [ +0.000002] Call Trace: [ +0.000002] <TASK> [ +0.000003] ? show_regs+0x65/0x70 [ +0.000006] ? __die+0x24/0x70 [ +0.000004] ? page_fault_oops+0x160/0x470 [ +0.000006] ? do_user_addr_fault+0x2b5/0x690 [ +0.000003] ? prb_read_valid+0x1c/0x30 [ +0.000005] ? exc_page_fault+0x8c/0x1a0 [ +0.000005] ? asm_exc_page_fault+0x27/0x30 [ +0.000012] dcn10_log_color_state+0xf9/0x510 [amdgpu] [ +0.000306] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000003] ? vsnprintf+0x2fb/0x600 [ +0.000009] dcn10_log_hw_state+0xfd0/0xfe0 [amdgpu] [ +0.000218] ? __mod_memcg_lruvec_state+0xe8/0x170 [ +0.000008] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? debug_smp_processor_id+0x17/0x20 [ +0.000003] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? set_ptes.isra.0+0x2b/0x90 [ +0.000004] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? _raw_spin_unlock+0x19/0x40 [ +0.000004] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? do_anonymous_page+0x337/0x700 [ +0.000004] dtn_log_read+0x82/0x120 [amdgpu] [ +0.000207] full_proxy_read+0x66/0x90 [ +0.000007] vfs_read+0xb0/0x340 [ +0.000005] ? __count_memcg_events+0x79/0xe0 [ +0.000002] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000003] ? count_memcg_events.constprop.0+0x1e/0x40 [ +0.000003] ? handle_mm_fault+0xb2/0x370 [ +0.000003] ksys_read+0x6b/0xf0 [ +0.000004] __x64_sys_read+0x19/0x20 [ +0.000003] do_syscall_64+0x60/0x130 [ +0.000004] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ +0.000003] RIP: 0033:0x7fdf32f147e2 [...] This error happens when the color log tries to read the gamut remap information from DCN401 which is not initialized in the dcn401_dpp_funcs which leads to a null pointer dereference. This commit addresses this issue by adding a proper guard to access the gamut_remap callback in case the specific ASIC did not implement this function. Reviewed-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by:
Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by:
-
Sridevi Arvindekar authored
Mirror case unsupported for cursors. So, remove code for mirror case with cursors. Reviewed-by:
Nevenko Stupar <nevenko.stupar@amd.com> Acked-by:
Sridevi Arvindekar <sarvinde@amd.com> Signed-off-by:
-
Alex Hung authored
Checks null pointer before accessing various structs. This fixes 5 NULL_RETURNS issues reported by Coverity. Reviewed-by:
-
- 14 Jun, 2024 33 commits
-
-
Alex Hung authored
Callers can pass null in filter (i.e. from returned from the function wbscl_get_filter_coeffs_16p) and a null check is added to ensure that is not the case. This fixes 4 NULL_RETURNS issues reported by Coverity. Reviewed-by:
-
Alex Hung authored
BIOS images may fail to load and null checks are added before they are used. This fixes 6 NULL_RETURNS issues reported by Coverity. Reviewed-by:
-
Alex Hung authored
Checks null pointer before passing variables to functions. This fixes 3 NULL_RETURNS issues reported by Coverity. Reviewed-by:
-
Alex Hung authored
Coverity reports sign extention defects as below: Suspicious implicit sign extension: mode->htotal with type u16 ... to int (32 bits, signed), then sign-extended to type unsigned long (64 bits, unsigned). If mode->htotal * mode->vtotal is greater than 0x7FFFFFFF, the upper bits of the result will all be 1. Cast it to unsigned long to avoid possible overflow. This fixes 4 SIGN_EXTENSION issues reported by Coverity. Reviewed-by:
-
Sung Joon Kim authored
[why] Tell the system about the current host router bandwidth to be used to measure and calculate the right voltage to be used. [how] Send SMU message of each DPIA host router bandwidth. Reviewed-by:
Sung Joon Kim <sungjoon.kim@amd.com> Signed-off-by:
-
Dillon Varone authored
When a phantom stream is in the process of being deconstructed, there could be pipes with no associated planes. In that case, ignore the phantom stream entirely when searching for associated pipes. Cc: stable@vger.kernel.org Reviewed-by:
Dillon Varone <dillon.varone@amd.com> Signed-off-by:
-
Michael Strauss authored
[WHY] Empty SST TUs are illegal to transmit over a USB4 DP tunnel. Current policy is to configure stream encoder to pack 2 pixels per pclk even when ODM combine is not in use, allowing seamless dynamic ODM reconfiguration. However, in extreme edge cases where average pixel count per TU is less than 2, this can lead to unexpected empty TU generation during compliance testing. For example, VIC 1 with a 1xHBR3 link configuration will average 1.98 pix/TU. [HOW] Calculate average pixel count per TU, and block 2 pixels per clock if endpoint is a DPIA tunnel and pixel clock is low enough that we will never require 2:1 ODM combine. Cc: stable@vger.kernel.org # 6.6+ Reviewed-by:
Wenjing Liu <wenjing.liu@amd.com> Acked-by:
Michael Strauss <michael.strauss@amd.com> Signed-off-by:
-
Mounika Adhuri authored
[why] Move DCN3X files to unique component folder. [how] Create respective component folder in dc, move the DCN3X files into corresponding new folders and made appropriate changes for compilation in Makefiles. Reviewed-by:
Martin Leung <martin.leung@amd.com> Acked-by:
Mounika Adhuri <moadhuri@amd.com> Signed-off-by:
-
Chris Park authored
[Why] On init if a display is connected, we need to maintain the DISPCLK frequency Even though DPG_EN=1, the display still requires the correct timing or it could cause audio corruption (if DISPCLK freq is reduced). [How] Read the current DISPCLK freq and request the same value to ensure the timing is valid and unchanged. Reviewed-by:
Chris Park <chris.park@amd.com> Signed-off-by:
-
Wenjing Liu authored
There is a coding error which causes incorrect variables to be assigned in DML21 phase 5. Reviewed-by:
-
Ivan Lipski authored
[WHY] Coverity analysis this conditional code as DEADCODE. The conditional statement is never true since 'MacroTileSizeBytes' is either 256 or 65536. Thus, the code inside is the conditional statement is never reached. [HOW] Removed the conditional statement. Reviewed-by:
Ivan Lipski <ivlipski@amd.com> Signed-off-by:
-
Ivan Lipski authored
[WHY] Coverity analysis flagged this condition as DEADCODE since the variable 'req128_c' is always false, thus the condition is never true. [HOW] Remove the condition. Reviewed-by:
-
Joshua Aberback authored
This reverts commit e902dd7f. A proper fix for this issue has been implemented in DMUB FW. So, no need to keep the workaround. Reviewed-by:
Joshua Aberback <joshua.aberback@amd.com> Signed-off-by:
-
Relja Vojvodic authored
[Why] Found while hotplugging MST daisy chain displays. Changing dispclk during this sequence caused SMU hang due to DIG fifo not being disabled correctly (caused by missing functions). [How] Adding disable/enable DIG fifo functions for dcn401 Reviewed-by:
Relja Vojvodic <relja.vojvodic@amd.com> Signed-off-by:
-
Dillon Varone authored
[WHY&HOW] Re-enable idle optimizations by default. Reviewed-by:
-
Joshua Aberback authored
[Why] During HW init, certain operations the driver performs are invalid on enabled hardware in an unknown state (for example, setting all clock values to minimum when the GPU is actively driving a display). There is already code present to call HWSS->power_down during init when any link is enabled in HW, but that function pointer is unpopulated for most asics. We want to enable this codepath for DCN401, as it resolves the issue with being unable to drive certain display configs on adapter re-enable, and we can restore boot optimizations. [How] - add power_down HWSS function for DCN401 - remove debug bit to disable boot optimizations for DCN401 Reviewed-by:
-
Yang Wang authored
refine gfx8 firmware loading Signed-off-by:
Yang Wang <kevinyang.wang@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Tao Zhou authored
GFX v9.4.3 uses mode1 reset, other ASICs choose mode2. Signed-off-by:
Tao Zhou <tao.zhou1@amd.com> Acked-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
-
Tao Zhou authored
Per firmware's requirement, replace mode2 with mode1. Signed-off-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Tao Zhou authored
The fed status does indicate RAS fatal error. Signed-off-by:
-
Tao Zhou authored
Indicate fatal error for each RAS block and NBIO. Signed-off-by:
-
Tao Zhou authored
Reduce redundant code and user doesn't need to pay attention to RAS details. Signed-off-by:
-
Tao Zhou authored
Check RMA status in bad page retirement flow. v2: fix coding bugs in v1. Signed-off-by:
-
Daniel Miess authored
[Why] PHYSYMCLK RCO has been found to lead to crashes in some corner cases [How] Disable PHYSYMCLK RCO debug bit Reviewed-by:
Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by:
Daniel Miess <daniel.miess@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Anthony Koo authored
- Create a general command and fix Replay desync error with general cmd Acked-by:
Anthony Koo <anthony.koo@amd.com> Tested-by:
-
Aric Cyr authored
* FW Release 0.0.221.0 * Fixed missing targets in FAMS2 * Populate hardware_release hook for dcn401 * Disable DMCUB timeout for DCN35 * Move PRIMARY plane zpos higher * Introduce overlay cursor mode * Change dram_clock_latency for dcn35 and dcn351 * DCN401 cursor code update Acked-by:
Aric Cyr <aric.cyr@amd.com> Tested-by:
-
Dillon Varone authored
[WHY&HOW] Update the idle hardmin with SMU if either clock changed. Reviewed-by:
-
Alex Hung authored
[WHAT & HOW] dmub_rb_cmd's ramping_boundary has size of uint8_t and it is assigned 0xFFFF. Fix it by changing it to uint8_t with value of 0xFF. This fixes 2 INTEGER_OVERFLOW issues reported by Coverity. Reviewed-by:
-
Dillon Varone authored
[WHY&HOW] Reinit should return after completing version 2.1 reinit instead of calling version 2 reinit after. Reviewed-by:
-
Dillon Varone authored
[WHY&HOW] Add additional delay factor when considering a safe time to flip for HWFQ to be passed in by the driver. Reviewed-by:
-
Dillon Varone authored
[WHY&HOW] Sometimes this function is called with a partially deconstructed phantom stream toplolgy, and should ignore phantoms with no plane state. Reviewed-by:
-
Dillon Varone authored
[WHY&HOW] SubVP is not supported when hardware rotation is in use. Reviewed-by:
-
Alex Hung authored
[WHY & HOW] v_total is an uint32_t and subtracting an unsigned to a signed will result in an unsigned which is always >= 0. As a result, the ternary conditions are always true and thus has no effect. This is fixed by casting v_total to signed explicitly. This also avoids v_total subtraction to overflow. This fixes 1 NO_EFFECT, 2 DEADCODE and 2 INTEGER_OVERFLOW issues reported by Coverity. Reviewed-by:
-
