- 05 Aug, 2021 1 commit
-
-
Chris Wilson authored
Jason Ekstrand requested a more efficient method than userptr+set-domain to determine if the userptr object was backed by a complete set of pages upon creation. To be more efficient than simply populating the userptr using get_user_pages() (as done by the call to set-domain or execbuf), we can walk the tree of vm_area_struct and check for gaps or vma not backed by struct page (VM_PFNMAP). The question is how to handle VM_MIXEDMAP which may be either struct page or pfn backed... With discrete we are going to drop support for set_domain(), so offering a way to probe the pages, without having to resort to dummy batches has been requested. v2: - add new query param for the PROBE flag, so userspace can easily check if the kernel supports it(Jason). - use mmap_read_{lock, unlock}. - add some kernel-doc. v3: - In the docs also mention that PROBE doesn't guarantee that the pages will remain valid by the time they are actually used(Tvrtko). - Add a small comment for the hole finding logic(Jason). - Move the param next to all the other params which just return true. Testcase: igt/gem_userptr_blits/probe Signed-off-by:Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Acked-by:
Kenneth Graunke <kenneth@whitecape.org> Reviewed-by:
Jason Ekstrand <jason@jlekstrand.net> Acked-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
- 04 Aug, 2021 6 commits
-
-
Daniel Vetter authored
It's already removed, this just garbage collects it all. v2: Rebase over s/GEN/GRAPHICS_VER/ v3: Also ditch eb.reloc_pool and eb.reloc_context (Maarten) Reviewed-by:
Daniel Vetter <daniel.vetter@intel.com> Cc: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Jason Ekstrand <jason@jlekstrand.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210803124833.3817354-2-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
Media userspace was the last userspace to still use them, and they converted now too: https://github.com/intel/media-driver/commit/144020c37770083974bedf59902b70b8f444c799 This means no reason anymore to make relocations faster than they've been for the first 9 years of gem. This code was added in commit 7dd4f672 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Jun 16 15:05:24 2017 +0100 drm/i915: Async GPU relocation processing Furthermore there's pretty strong indications it's buggy, since the code to use it by default as the only option had to be reverted: commit ad5d95e4 Author: Dave Airlie <airlied@redhat.com> Date: Tue Sep 8 15:41:17 2020 +1000 Revert "drm/i915/gem: Async GPU relocations only" This code just disables gpu relocations, leaving the garbage collection for later patches and more importantly, much less confusing diff. Also given how much headaches this code has caused in the past, letting this soak for a bit seems justified. Acked-by:
Dave Airlie <airlied@redhat.com> Reviewed-by:
-
Matt Roper authored
DG2 supports compute DSS and has the same maximum number of DSS and EU as XeHP SDV. Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
Caz Yokoyama <caz.yokoyama@intel.com> Reviewed-by:
José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210729170008.2836648-12-matthew.d.roper@intel.com
-
Matt Roper authored
Due to the removal of legacy slices and the transition to a gslice/cslice/mslice/etc. design, we'll internally store all DSS under "slice0." Signed-off-by:
-
Matthew Auld authored
Xe_HP no longer has "slices" in the same way that old platforms did. There are new concepts (gslices, cslices, mslices) that apply in various contexts, but for the purposes of fusing slices no longer exist and we just have one large pool of dual-subslices (DSS) to work with. Furthermore, the meaning of the DSS fuse is inverted compared to past platforms --- it now specifies which DSS are enabled rather than which ones are disabled. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by:
Stuart Summers <stuart.summers@intel.com> Signed-off-by:
Prasad Nallani <prasad.nallani@intel.com> Reviewed-by:
-
Matt Roper authored
The DG2 forcewake table is very similar to the one used by XeHP SDV (and both platforms are even presented as a single table in the bspec). For the most part DG2 starts using a few additional ranges that were 'reserved' on XeHP SDV and stops using some others. However there is a single range (0xd800-0xd87f) that needs to be handled differently between the two platforms (it needs GT wake on XeHP SDV, but render wake on DG2) so unless we want to wake both domains (which could waste power) or define new types of forcewake domains for this special case we need to have separate tables for the two platforms. Let's define the ranges for both platforms with a parameterized macro so that we don't actually need to duplicate everything in the code. It should be fine for DG2 to re-use the Xe_HP shadow register list so we can continue to use the 'xehpsdv' MMIO write functions and don't need to spin up a separate DG2 instance. Bspec: 66534 Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
-
- 03 Aug, 2021 14 commits
-
-
Vinay Belgaumkar authored
This feature hands over the control of HW RC6 to the GuC. GuC decides when to put HW into RC6 based on it's internal busyness algorithms. GuCRC needs GuC submission to be enabled, and only supported on Gen12+ for now. When GuCRC is enabled, do not set HW RC6. Use a H2G message to tell GuC to enable GuCRC. When disabling RC6, tell GuC to revert RC6 control back to KMD. KMD is still responsible for enabling everything related to Coarse Power Gating though. v2: Address comments (Michal W) v3: Don't set hysterisis values when GuCRC is used (Matt Roper) v4: checkpatch() Reviewed-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by:
Vinay Belgaumkar <vinay.belgaumkar@intel.com> Signed-off-by:
John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-15-vinay.belgaumkar@intel.com
-
Vinay Belgaumkar authored
Tests that exercise the SLPC get/set frequency interfaces. Clamp_max will set max frequency to multiple levels and check that SLPC requests frequency lower than or equal to it. Clamp_min will set min frequency to different levels and check if SLPC requests are higher or equal to those levels. v2: Address review comments (Michal W) v3: Checkpatch() corrections v4: Remove unnecessary header file (Matthew Brost) v5: checkpatch() and define const for 50/3 (Matthew Brost) Reviewed-by:
Matthew Brost <matthew.brost@intel.com> Signed-off-by:
-
Vinay Belgaumkar authored
Update the get/set min/max freq hooks to work for SLPC case as well. Consolidate helpers for requested/min/max frequency get/set to intel_rps where the proper action can be taken depending on whether SLPC is enabled. v2: Add wrappers for getting rp0/1/n frequencies, update softlimits in set min/max SLPC functions. Also check for boundary conditions before setting them. v3: Address review comments (Michal W) v4: Add helper for host part of intel_rps_set_freq helpers (Michal W) v5: checkpatch() Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by:
Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> Signed-off-by:
-
Vinay Belgaumkar authored
Cache rp0, rp1 and rpn platform limits into SLPC structure for range checking while setting min/max frequencies. Also add "soft" limits which keep track of frequency changes made from userland. These are initially set to platform min and max. v2: Address review comments (Michal W) v3: Formatting (Michal W) v4: Add separate function to parse rp values (Michal W) v5: Perform range checking for set min/max (Michal W) v6: checkpatch() and rename static functions (Michal W) v7: check ret code while setting SLPC limits (Michal W) Signed-off-by:
-
Vinay Belgaumkar authored
This interrupt is enabled during RPS initialization, and now needs to be done by SLPC code. It allows ARAT timer expiry interrupts to get forwarded to GuC. v2: Fix comment (Matthew Brost) v3: checkpatch() Reviewed-by:
-
Vinay Belgaumkar authored
This prints out relevant SLPC info from the SLPC shared structure. We will send a H2G message which forces SLPC to update the shared data structure with latest information before reading it. v2: Address review comments (Michal W) v3: Remove unnecessary tasks from slpc_info (Michal W) v4: Rename function to intel_guc_slpc_print_info() (Michal W) v5: checkpatch() Reviewed-by:
-
Vinay Belgaumkar authored
Add helpers to read the min/max frequency being used by SLPC. This is done by send a H2G command which forces SLPC to update the shared data struct which can then be read. These helpers will be used in a sysfs patch later on. v2: Address review comments (Michal W) v3: Return err in case of query failure (Michal W) v4: Move decode_min/max_freq to this patch Reviewed-by:
-
Vinay Belgaumkar authored
Add param set h2g helpers to set the min and max frequencies for use by SLPC. v2: Address review comments (Michal W) v3: Check for positive error code (Michal W) v4: Print generic error in set_param (Michal W) Reviewed-by:
-
Vinay Belgaumkar authored
The assumption when it was added was that GT would not be holding any gt_pm references. However, uc_init is called from gt_init_hw, which holds a forcewake ref. If SLPC enable fails, we will still be holding this ref, which will result in the BUG_ON. Reviewed-by:
-
Vinay Belgaumkar authored
Add methods for interacting with GuC for enabling SLPC. Enable SLPC after GuC submission has been established. GuC load will fail if SLPC cannot be successfully initialized. Add various helper methods to set/unset the parameters for SLPC. They can be set using H2G calls or directly setting bits in the shared data structure. v2: Address several review comments, add new helpers for decoding the SLPC min/max frequencies. Use masks instead of hardcoded constants. (Michal W) v3: Split global_state_to_string function, and check for positive non-zero return value from intel_guc_send() (Michal W) v4: Optimize the stringify function and other comments (Michal W) v5: Enable slpc as well before declaring GuC submission status (Michal W) v6: Checkpatch() Reviewed-by:
-
Vinay Belgaumkar authored
Allocate data structures for SLPC and functions for initializing on host side. v2: Address review comments (Michal W) v3: Remove unnecessary header includes (Michal W) v4: Rebase v5: Move allocation of shared data into slpc_init() (Michal W) Reviewed-by:
-
Vinay Belgaumkar authored
Add constants and params that are needed to configure SLPC. v2: Add a new abi header for SLPC. Replace bitfields with genmasks. Address other comments from Michal W. v3: Add slpc H2G format in abi, other review commments (Michal W) v4: Update status bits according to latest spec v5: checkpatch() Reviewed-by:
-
Vinay Belgaumkar authored
Also ensure uc_init is called before we initialize RPS so that we can check for SLPC support. We do not need to enable up/down interrupts when SLPC is enabled. However, we still need the ARAT interrupt, which will be enabled separately later. v2: Explicitly return from intel_rps_enable with slpc check (Matthew B) Reviewed-by:
-
Vinay Belgaumkar authored
Add macros to check for SLPC support. This feature is currently supported for Gen12+ and enabled whenever GuC submission is enabled/selected. Include templates for SLPC init/fini and enable. v2: Move SLPC helper functions to intel_guc_slpc.c/.h. Define basic template for SLPC structure in intel_guc_slpc_types.h. Fix copyright (Michal W) v3: Review comments (Michal W) v4: Include supported/selected inside slpc struct (Michal W) Reviewed-by:
-
- 31 Jul, 2021 1 commit
-
-
Lucas De Marchi authored
There's a missing sentinel since we are not using ARRAY_SIZE(), but rather checking that the .start is 0 to stop the iteration in mcr_range(). BUG: KASAN: global-out-of-bounds in mcr_range.isra.0+0x69/0xa0 [i915] Read of size 4 at addr ffffffffa0889928 by task modprobe/3881 Fixes: d8905ba7 ("drm/i915/xehp: Define multicast register ranges") Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
-
- 30 Jul, 2021 1 commit
-
-
Matthew Auld authored
No need to hand roll the set_placements stuff, now that we have a helper for this. v2: add back the -ENODEV checking since it's possible for stolen to be probed, and yet still be non-functional Signed-off-by:
-
- 29 Jul, 2021 4 commits
-
-
Lucas De Marchi authored
Replace all remaining handling of GRAPHICS_VER {==,>=} 10 with {==,>=} 11. With the removal of CNL, there is no platform with graphics version equals 10. Signed-off-by:Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210728220326.1578242-5-lucas.demarchi@intel.com
-
Lucas De Marchi authored
With the removal of CNL, let's consider ICL as the first platform using that index. Signed-off-by:
-
Lucas De Marchi authored
CNL is the only platform with GRAPHICS_VER == 10. With its removal we don't need to handle that version anymore. Also we can now reduce the max number of slices: the call to intel_sseu_set_info() with the highest number of slices comes from SKL and BDW with 3 slices. Recent platforms actually increase the number of subslices so the number of slices remain 1. Signed-off-by:
-
Lucas De Marchi authored
Only one reference to CNL that is not needed, but code is the same for GEN9_BC, so leave the code around and just remove the special case for CNL. Signed-off-by:
-
- 28 Jul, 2021 13 commits
-
-
Daniel Vetter authored
The module init code is somewhat misplaced in i915_pci.c, since it needs to pull in init/exit functions from every part of the driver and pollutes the include list a lot. Extract an i915_module.c file which pulls all the bits together, and allows us to massively trim the include list of i915_pci.c. The downside is that have to drop the error path check Jason added to catch when we set up the pci driver too early. I think that risk is acceptable for this pretty nice include. Reviewed-by:
-
Daniel Vetter authored
No longer used. Reviewed-by:
-
Daniel Vetter authored
With the global kmem_cache shrink infrastructure gone there's nothing special and we can convert them over. I'm doing this split up into each patch because there's quite a bit of noise with removing the static global.slab_vmas to just a slab_vmas. We have to keep i915_drv.h include in i915_globals otherwise there's nothing anymore that pulls in GEM_BUG_ON. v2: Make slab static (Jason, 0day) Reviewed-by:
-
Daniel Vetter authored
With the global kmem_cache shrink infrastructure gone there's nothing special and we can convert them over. I'm doing this split up into each patch because there's quite a bit of noise with removing the static global.slab_dependencies|priorities to just a slab_dependencies|priorities. v2: Make slab static (Jason, 0day) Reviewed-by:
-
Daniel Vetter authored
With the global kmem_cache shrink infrastructure gone there's nothing special and we can convert them over. I'm doing this split up into each patch because there's quite a bit of noise with removing the static global.slab_requests|execute_cbs to just a slab_requests|execute_cbs. v2: Make slab static (Jason, 0day) Reviewed-by:
-
Daniel Vetter authored
With the global kmem_cache shrink infrastructure gone there's nothing special and we can convert them over. I'm doing this split up into each patch because there's quite a bit of noise with removing the static global.slab_objects to just a slab_objects. v2: Make slab static (Jason, 0day) Reviewed-by:
-
Daniel Vetter authored
With the global kmem_cache shrink infrastructure gone there's nothing special and we can convert them over. I'm doing this split up into each patch because there's quite a bit of noise with removing the static global.slab_luts to just a slab_luts. v2: Make slab static (Jason, 0day) Reviewed-by:
-
Daniel Vetter authored
With the global kmem_cache shrink infrastructure gone there's nothing special and we can convert them over. I'm doing this split up into each patch because there's quite a bit of noise with removing the static global.slab_ce to just a slab_ce. v2: Make slab static (Jason, 0day) Reviewed-by:
-
Daniel Vetter authored
With the global kmem_cache shrink infrastructure gone there's nothing special and we can convert them over. I'm doing this split up into each patch because there's quite a bit of noise with removing the static global.slab_blocks to just a slab_blocks. v2: Make slab static (Jason, 0day) Reviewed-by:
-
Daniel Vetter authored
With the global kmem_cache shrink infrastructure gone there's nothing special and we can convert them over. I'm doing this split up into each patch because there's quite a bit of noise with removing the static global.slab_cache to just a slab_cache. v2: Make slab static (Jason, 0day) Reviewed-by:
-
Daniel Vetter authored
When modesetting (aka the full pci driver, which has nothing to do with disable_display option, which just gives you the full pci driver without the display driver) is disabled, we load nothing and do nothing. So move that check first, for a bit of orderliness. With Jason's module init/exit table this now becomes trivial. Reviewed-by:
-
Matt Roper authored
During a rebase the parameters were partially renamed, but not completely. Since the subsequent patches that start using this macro haven't landed on an upstream tree yet this didn't cause a build failure. Fixes: 086df54e ("drm/i915/xehpsdv: add initial XeHP SDV definitions") Signed-off-by:
-
Daniele Ceraolo Spurio authored
Unblock GuC submission on Gen11+ platforms. v2: (Martin Peres / John H) - Delete debug message when GuC is disabled by default on certain platforms Signed-off-by:
-
