- 10 Sep, 2010 13 commits
-
-
Yusuke Goda authored
Previously, it was possible for ack_mmc_irqs() to clear pending interrupt bits in the CTL_STATUS register, even though the interrupt handler had not been called. This was because of a race that existed when doing a read-modify-write sequence on CTL_STATUS. After the read step in this sequence, if an interrupt occurred (causing one of the bits in CTL_STATUS to be set) the write step would inadvertently clear it. Observed with the TMIO_STAT_RXRDY bit together with CMD53 on AR6002 and BCM4318 SDIO cards in polled mode. This patch eliminates this race by only writing to CTL_STATUS and clearing the interrupts that were passed as an argument to ack_mmc_irqs()." [matt@console-pimps.org: rewrote changelog] Signed-off-by:
Yusuke Goda <yusuke.goda.sx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se>" Tested-by: Arnd Hannemann <arnd@arndnet.de>" Acked-by:
Ian Molton <ian@mnementh.co.uk> Cc: Matt Fleming <matt@console-pimps.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: <linux-mmc@vger.kernel.org> Cc: <stable@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Michael S. Tsirkin authored
Add cgroup_attach_task_all() The existing cgroup_attach_task_current_cg() API is called by a thread to attach another thread to all of its cgroups; this is unsuitable for cases where a privileged task wants to attach itself to the cgroups of a less privileged one, since the call must be made from the context of the target task. This patch adds a more generic cgroup_attach_task_all() API that allows both the source task and to-be-moved task to be specified. cgroup_attach_task_current_cg() becomes a specialization of the more generic new function. [menage@google.com: rewrote changelog] [akpm@linux-foundation.org: address reviewer comments] Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Tested-by:
Alex Williamson <alex.williamson@redhat.com> Acked-by:
Paul Menage <menage@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Ben Blum <bblum@google.com> Cc: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by:
-
Takashi Iwai authored
Fix the left-over old ifdef for PG_uncached in /proc/kpageflags. Now it's used by x86, too. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
-
Peter Oberparleiter authored
The gcov-kernel infrastructure expects that each object file is loaded only once. This may not be true, e.g. when loading multiple kernel modules which are linked to the same object file. As a result, loading such kernel modules will result in incorrect gcov results while unloading will cause a null-pointer dereference. This patch fixes these problems by changing the gcov-kernel infrastructure so that multiple profiling data sets can be associated with one debugfs entry. It applies to 2.6.36-rc1. Signed-off-by:
Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Reported-by:
Werner Spies <werner.spies@thalesgroup.com> Cc: <stable@kernel.org> Signed-off-by:
-
Simon Horman authored
Kexec tools has been moved to http://kernel.org/pub/linux/utils/kernel/kexec/ as user-space code shouldn't be in /pub/linux/kernel Signed-off-by:
Simon Horman <horms@verge.net.au> Acked-by:
"Eric W. Biederman" <ebiederm@xmission.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
-
Jeff Moyer authored
commit c2c6ca41 (direct-io: do not merge logically non-contiguous requests) introduced a bug whereby all O_DIRECT I/Os were submitted a page at a time to the block layer. The problem is that the code expected dio->block_in_file to correspond to the current page in the dio. In fact, it corresponds to the previous page submitted via submit_page_section. This was purely an oversight, as the dio->cur_page_fs_offset field was introduced for just this purpose. This patch simply uses the correct variable when calculating whether there is a mismatch between contiguous logical blocks and contiguous physical blocks (as described in the comments). I also switched the if conditional following this check to an else if, to ensure that we never call dio_bio_submit twice for the same dio (in theory, this should not happen, anyway). I've tested this by running blktrace and verifying that a 64KB I/O was submitted as a single I/O. I also ran the patched kernel through xfstests' aio tests using xfs, ext4 (with 1k and 4k block sizes) and btrfs and verified that there were no regressions as compared to an unpatched kernel. Signed-off-by:
Jeff Moyer <jmoyer@redhat.com> Acked-by:
Josef Bacik <jbacik@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Chris Mason <chris.mason@oracle.com> Cc: <stable@kernel.org> [2.6.35.x] Signed-off-by:
-
Takashi Iwai authored
Added missing axis-mapping for HP ProBook 532x and HP Mini 5102. Signed-off-by:
-
Jiri Slaby authored
bob.picco@hp.com doesn't work any more and Bob says that he's unlikely to work on hpet.c in the future. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Acked-by:
Bob Picco <bpicco@redhat.com> Signed-off-by:
-
Mike Frysinger authored
Much (but not all) of the RTC state is kept in the RTC peripheral which has its own power domain. Periodically (1 HZ), that state is synced from one power domain to the other (peripheral->core). When we are resuming, we need to wait for the sync to occur so that we don't get a mismatch of reading undefined state in the rest of the driver. Further, once the externally maintained bits have been synced back into the core, we then need to restore the bits maintained in the core. In our particular case, that is just the write completion interrupt bit. If we don't do any of this, working with the RTC causes ~5 second delays from time to time after waking up due to the write completion interrupt never firing. Reported-by:
Michael Dean <mdean@aeronix.com> Reported-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Acked-by:
Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Mike Frysinger authored
The int_clear helper takes a bitmask of interrupts to keep, not to disable. When suspending without wakeup enabled, we want to disable all interrupts, so use 0 (keep none) instead of -1 (keep all). Signed-off-by:
-
Huang Ying authored
Some macro parameter references inside typeof() operator are not enclosed with parenthesis. It should be safer to add them. Signed-off-by:
Huang Ying <ying.huang@intel.com> Acked-by:
Stefani Seibold <stefani@seibold.net> Signed-off-by:
-
David Vrabel authored
The introduction of support for SD combo cards breaks the initialization of all CSR SDIO chips. The GO_IDLE (CMD0) in mmc_sd_get_cid() causes CSR chips to be reset (this is non-standard behavior). When initializing an SDIO card check for a combo card by using the memory present bit in the R4 response to IO_SEND_OP_COND (CMD5). This avoids the call to mmc_sd_get_cid() on an SDIO-only card. Signed-off-by:
David Vrabel <david.vrabel@csr.com> Acked-by:
Michal Mirolaw <mirq-linux@rere.qmqm.pl> Cc: <linux-mmc@vger.kernel.org> Signed-off-by:
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: (30 commits) ARM: Update mach-types ARM: Partially revert "Auto calculate ZRELADDR and provide option for exceptions" ARM: Ensure PTE modifications via dma_alloc_coherent are visible ARM: 6359/1: ep93xx: move clock initialization earlier Revert "[ARM] pxa: remove now unnecessary dma_needs_bounce()" ARM: 6352/1: perf: fix event validation ARM: 6344/1: Mark CPU_32v6K as depended on CPU_V7 ARM: 6343/1: wire up fanotify and prlimit64 syscalls on ARM ARM: 6330/1: perf: reword comments relating to perf_event_do_pending ARM: pxa168fb: fix section mismatch ARM: pxa: Make id const in pwm_probe() ARM: pxa: fix CI_HSYNC and CI_VSYNC MFP defines for pxa300 ARM: pxa: remove __init from cpufreq_driver->init() ARM: imx: set cache line size to 64 bytes for i.MX5 mx5/clock: fix clear bit fields issue in _clk_ccgr_disable function mxc/tzic: add base address when accessing TZIC registers ARM: mach-shmobile: ap4evb: fix write protect for SDHI1 ARM: mach-shmobile: ap4evb: modify FSI2 ID ARM: mach-shmobile: do not enable the PLLC2 clock on init ARM: mach-shmobile: Clock framework comment fix ...
-
- 09 Sep, 2010 7 commits
-
-
Russell King authored
Signed-off-by:Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
Partially revert e69edc7, which introduced automatic zreladdr support. The change in the way the manual definition is defined seems to be error and conflict prone. Go back to the original way we were handling this for the time being, while keeping the automatic zreladdr facility. Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de Signed-off-by: -
Russell King authored
-
Jonathan Corbet authored
lg_lock_global() currently only acquires spinlocks for online CPUs, but it's meant to lock all possible CPUs. Lglock-protected resources may be associated with removed CPUs - and, indeed, that could happen with the per-superblock open files lists. At Nick's suggestion, change for_each_online_cpu() to for_each_possible_cpu() to protect accesses to those resources. Cc: Al Viro <viro@ZenIV.linux.org.uk> Acked-by:
Nick Piggin <npiggin@kernel.dk> Signed-off-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Stefan Bader authored
So it can be used by all that need to check for that. Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/nes: Fix hang with modified FIN handling on A0 cards RDMA/nes: Change state to closing after FIN RDMA/nes: Fix double CLOSE event indication crash RDMA/nes: Write correct register write to set TX pause param RDMA/cxgb3: Don't exceed the max HW CQ depth
-
git://oss.oracle.com/git/tma/linux-2.6Linus Torvalds authored
* 'fixes' of git://oss.oracle.com/git/tma/linux-2.6: ocfs2: Fix orphan add in ocfs2_create_inode_in_orphan ocfs2: split out ocfs2_prepare_orphan_dir() into locking and prep functions ocfs2: allow return of new inode block location before allocation of the inode ocfs2: use ocfs2_alloc_dinode_update_counts() instead of open coding ocfs2: split out inode alloc code from ocfs2_mknod_locked Ocfs2: Fix a regression bug from mainline commit(6b933c8e). ocfs2: Fix deadlock when allocating page ocfs2: properly set and use inode group alloc hint ocfs2: Use the right group in nfs sync check. ocfs2: Flush drive's caches on fdatasync ocfs2: make __ocfs2_page_mkwrite handle file end properly. ocfs2: Fix incorrect checksum validation error ocfs2: Fix metaecc error messages
-
- 08 Sep, 2010 20 commits
-
-
Roland Dreier authored
-
Faisal Latif authored
Changing state to CLOSING when FIN is received causes A0 cards to hang. Fix this by checking for A0 cards in FIN handling. Signed-off-by:
Faisal Latif <faisal.latif@intel.com> Signed-off-by:
Roland Dreier <rolandd@cisco.com>
-
Faisal Latif authored
When the driver receives an AE for FIN received, it closes the connection without changing the state of the connection in the hardware to closing. By changing the state to closing, hardware will do a normal close sequence. Signed-off-by:
-
Faisal Latif authored
During a stress testing in a large cluster, multiple close event are detected and BUG() is hit in the iWARP core. The cause is that the active node gave up while waiting for an MPA response from the peer and tried to close the connection by sending RST. The passive node driver receives the RST but is waiting for MPA response from the user. When the MPA accept is received, the driver offloads the connection and sends a CLOSE event. The driver gets an AE indicating RESET received and also sends a CLOSE event, hitting a BUG(). Fix this by correcting RESET handling and sending CLOSE events. Signed-off-by:
-
Chien Tung authored
Setting TX pause param writes to the wrong register location causing the adapter to hang. Correct the define used to write the reigster. Addresses: https://bugs.openfabrics.org/show_bug.cgi?id=2116Reported-by:
Shiri Franchi <shirif@voltaire.com> Signed-off-by:
Chien Tung <chien.tin.tung@intel.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - fix device removal on unload Input: bcm5974 - adjust major/minor to scale Input: MT - initialize slots to unused Input: use PIT_TICK_RATE in vt beep ioctl Input: wacom - fix mousewheel handling for old wacom tablets
-
Linus Torvalds authored
Merge branch 'semaphore-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'semaphore-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: semaphore: Add DEFINE_SEMAPHORE
-
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, mcheck: Avoid duplicate sysfs links/files for thresholding banks io-mapping: Fix the address space annotations x86: Fix the address space annotations of iomap_atomic_prot_pfn() x86, mm: Fix CONFIG_VMSPLIT_1G and 2G_OPT trampoline x86, hwmon: Fix unsafe smp_processor_id() in thermal_throttle_add_dev
-
Linus Torvalds authored
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: gcc-4.6: kernel/*: Fix unused but set warnings mutex: Fix annotations to include it in kernel-locking docbook pid: make setpgid() system call use RCU read-side critical section MAINTAINERS: Add RCU's public git tree
-
Linus Torvalds authored
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf, x86: Try to handle unknown nmis with an enabled PMU perf, x86: Fix handle_irq return values perf, x86: Fix accidentally ack'ing a second event on intel perf counter oprofile, x86: fix init_sysfs() function stub lockup_detector: Sync touch_*_watchdog back to old semantics tracing: Fix a race in function profile oprofile, x86: fix init_sysfs error handling perf_events: Fix time tracking for events with pid != -1 and cpu != -1 perf: Initialize callchains roots's childen hits oprofile: fix crash when accessing freed task structs
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuseLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: fix lock annotations fuse: flush background queue on connection close
-
Russell King authored
Dave Hylands reports: | We've observed a problem with dma_alloc_writecombine when the system | is under heavy load (heavy bus traffic). We've managed to reduce the | problem to the following snippet, which is run from a kthread in a | continuous loop: | | void *virtAddr; | dma_addr_t physAddr; | unsigned int numBytes = 256; | | for (;;) { | virtAddr = dma_alloc_writecombine(NULL, | numBytes, &physAddr, GFP_KERNEL); | if (virtAddr == NULL) { | printk(KERN_ERR "Running out of memory\n"); | break; | } | | /* access DMA memory allocated */ | tmp = virtAddr; | *tmp = 0x77; | | /* free DMA memory */ | dma_free_writecombine(NULL, | numBytes, virtAddr, physAddr); | | ...sleep here... | } | | By itself, the code will run forever with no issues. However, as we | increase our bus traffic (typically using DMA) then the *tmp = 0x77 | line will eventually cause a page fault. If we add a small delay (a | few microseconds) before the *tmp = 0x77, then we don't see a page | fault, even under heavy load. A dsb() is required after modifying the PTE entries to ensure that they will always be visible. Add this dsb(). Reported-by:Dave Hylands <dhylands@gmail.com> Tested-by:
-
Thomas Gleixner authored
The full cleanup of init_MUTEX[_LOCKED] and DECLARE_MUTEX has not been done. Some of the users are real semaphores and we should name them as such instead of confusing everyone with "MUTEX". Provide the infrastructure to get finally rid of init_MUTEX[_LOCKED] and DECLARE_MUTEX. Signed-off-by:Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@infradead.org> LKML-Reference: <20100907125054.795929962@linutronix.de>
-
Mika Westerberg authored
Commit 7cfe2494 ("ARM: AMBA: Add pclk support to AMBA bus infrastructure") changed AMBA bus to handle the PCLK automatically. However, in EP93xx clock initialization is arch_initcall which is done later than AMBA device identification. This causes amba_get_enable_pclk() to fail resulting device where UARTs are not functional. So change ep93xx_clock_init() to be postcore_initcall. Signed-off-by:
Mika Westerberg <mika.westerberg@iki.fi> Acked-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by:
-
Russell King authored
This reverts commit 4fa5518c, which causes a compilation regression for IXP4xx platforms. Reported-by:
Richard Cochran <richardcochran@gmail.com> Acked-by:
Eric Miao <eric.y.miao@gmail.com> Signed-off-by:
-
Mark Fasheh authored
ocfs2_create_inode_in_orphan() is used by reflink to create the newly reflinked inode simultaneously in the orphan dir. This allows us to easily handle partially-reflinked files during recovery cleanup. We have a problem though - the orphan dir stringifies inode # to determine a unique name under which the orphan entry dirent can be created. Since ocfs2_create_inode_in_orphan() needs the space allocated in the orphan dir before it can allocate the inode, we currently call into the orphan code: /* * We give the orphan dir the root blkno to fake an orphan name, * and allocate enough space for our insertion. */ status = ocfs2_prepare_orphan_dir(osb, &orphan_dir, osb->root_blkno, orphan_name, &orphan_insert); Using osb->root_blkno might work fine on unindexed directories, but the orphan dir can have an index. When it has that index, the above code fails to allocate the proper index entry. Later, when we try to remove the file from the orphan dir (using the actual inode #), the reflink operation will fail. To fix this, I created a function ocfs2_alloc_orphaned_file() which uses the newly split out orphan and inode alloc code to figure out what the inode block number will be (once allocated) and then prepare the orphan dir from that data. Signed-off-by:Mark Fasheh <mfasheh@suse.com> Signed-off-by:
Tao Ma <tao.ma@oracle.com>
-
Mark Fasheh authored
We do this because ocfs2_create_inode_in_orphan() wants to order locking of the orphan dir with respect to locking of the inode allocator *before* making any changes to the directory. Signed-off-by:
-
Mark Fasheh authored
This allows code which needs to know the eventual block number of an inode but can't allocate it yet due to transaction or lock ordering. For example, ocfs2_create_inode_in_orphan() currently gives a junk blkno for preparation of the orphan dir because it can't yet know where the actual inode is placed - that code is actually in ocfs2_mknod_locked. This is a problem when the orphan dirs are indexed as the junk inode number will create an index entry which goes unused (and fails the later removal from the orphan dir). Now with these interfaces, ocfs2_create_inode_in_orphan() can run the block group search (and get back the inode block number) *before* any actual allocation occurs. Signed-off-by:
-
Mark Fasheh authored
ocfs2_search_chain() makes the same updates as ocfs2_alloc_dinode_update_counts to the alloc inode. Instead of open coding the bitmap update, use our helper function. Signed-off-by:
-
Mark Fasheh authored
Do this by splitting the bulk of the function away from the inode allocation code at the very tom of ocfs2_mknod_locked(). Existing callers don't need to change and won't see any difference. The new function created, __ocfs2_mknod_locked() will be used shortly. Signed-off-by:
-
