Merging in fixes and cleanup as prereqs to simplify merge conflicts.

* msm/fixes-non-critical:
  ARM: msm: Fix early debug uart mapping on some memory configs
  ARM: msm: io: Change the default static iomappings to be shared
  ARM: msm: io: Remove 7x30 iomap region from 7x00
  ARM: msm: Remove call to missing FPGA init on 8660

* msm/cleanup:
  ARM: msm: Remove uncompiled board-msm7x27
  ARM: msm: Remove unused acpuclock-arm11
  ARM: msm: dma: use list_move_tail instead of list_del/list_add_tail
  ARM: msm: Fix sparse warnings due to incorrect type
  ARM: msm: Remove unused idle.c
  ARM: msm: clock-pcom: Mark functions static
  ARM: msm: Remove msm_hw_reset_hook
Signed-off-by: Olof Johansson <olof@lixom.net>

This board file has never been compiled. Let's just remove it
along with the one Kconfig reference to it in io.c.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>

This is dead code that isn't initialized or setup (although it is
compiled). Remove it and the data structures it references.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>

Using list_move_tail() instead of list_del() + list_add_tail().

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David Brown <davidb@codeaurora.org>

arch/arm/mach-msm/timer.c:153:3: warning: incorrect type in initializer (different address spaces)
arch/arm/mach-msm/timer.c:153:3:    expected void const [noderef] <asn:3>*__vpp_verify
arch/arm/mach-msm/timer.c:153:3:    got struct clock_event_device [noderef] <asn:3>**<noident>
arch/arm/mach-msm/timer.c:153:38: warning: incorrect type in assignment (different address spaces)
arch/arm/mach-msm/timer.c:153:38:    expected struct clock_event_device [noderef] <asn:3>*<noident>
arch/arm/mach-msm/timer.c:153:38:    got struct clock_event_device *evt
arch/arm/mach-msm/timer.c:191:22: warning: incorrect type in assignment (different address spaces)
arch/arm/mach-msm/timer.c:191:22:    expected struct clock_event_device [noderef] <asn:3>**static [toplevel] percpu_evt
arch/arm/mach-msm/timer.c:191:22:    got struct clock_event_device *[noderef] <asn:3>*<noident>
arch/arm/mach-msm/timer.c:196:4: warning: incorrect type in initializer (different address spaces)
arch/arm/mach-msm/timer.c:196:4:    expected void const [noderef] <asn:3>*__vpp_verify
arch/arm/mach-msm/timer.c:196:4:    got struct clock_event_device [noderef] <asn:3>**<noident>
arch/arm/mach-msm/timer.c:196:39: warning: incorrect type in assignment (different address spaces)
arch/arm/mach-msm/timer.c:196:39:    expected struct clock_event_device [noderef] <asn:3>*<noident>
arch/arm/mach-msm/timer.c:196:39:    got struct clock_event_device *ce
arch/arm/mach-msm/timer.c:198:24: warning: incorrect type in argument 4 (different address spaces)
arch/arm/mach-msm/timer.c:198:24:    expected void [noderef] <asn:3>*percpu_dev_id
arch/arm/mach-msm/timer.c:198:24:    got struct clock_event_device [noderef] <asn:3>**static [toplevel] percpu_evt
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>

The uart mapping runs into the space allocated for lowmem on some
8960 boards when we have more than 512Mb of memory. We were
getting lucky before and our mapping wasn't part of DDR. Move the
mapping up into the vmalloc area which will always be outside of
the lowmem mapping regardless of how much lowmem actually exists.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>

Forcing arm_pm_idle to be msm_idle() doesn't make sense in
configurations that don't have CONFIG_MSM7X00A_IDLE=y (i.e. any
targets that aren't 7x00a). Furthermore, that config doesn't even
exist, so this entire file is dead code. Just remove it so we can
use the default idle support on MSM.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>

These functions are only used within clock-pcom.c, therefore mark
them as static.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>

This reset hook is never assigned and is dead code. Remove it so
we have one less header file in the mach directory.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>

With 3.4 kernel the static iomappings can be shared with the ioremap
mappings. If ioremap is called with an address for which a static
mapping already exists, then that mapping should be used instead
of creating a new one.

However, the MT_DEVICE_NONSHARED flag prevents this. Hence, get rid
of this flag. Some targets (7X00) that require the static iomappings
to be NONSHARED use the MSM_DEVICE_TYPE and MSM_CHIP_DEVICE_TYPE macros.
Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>

This is redundant code.
Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>

A previous patch[1] added code to initialize an FPGA register on the
8660 "SURF" development platform.  Since this development platform is
not widely available, and there is now a more available device "the
Dragonboard" based on the same core SOC, this change was dropped.

However, the DT code kept a lingering call to this FPGA init function.
Remove it.

[1] https://lkml.org/lkml/2011/8/12/357Signed-off-by: David Brown <davidb@codeaurora.org>

It replaces the clk_register_clkdev in imx6q clock driver with DT
lookup.  It depends on Mike's clk-3.7 branch.

* tag 'imx-clk-dt-lookup' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: imx6q: replace clk_register_clkdev with clock DT lookup

Resolved context add/remove conflict in arch/arm/boot/dts/imx6q.dtsi

- All imx53 board files are removed by the equal device tree support
- The efikamx board files are removed to ease device tree migration
- Remove dummy pinctrl state by setting up pinctrl in device tree

* tag 'imx-dt-3.7' of git://git.linaro.org/people/shawnguo/linux-2.6: (28 commits)
  ARM: imx6q-sabrelite: Rename 'pinctrl_gpio_hog'
  ARM: imx51: decouple device tree boot from board files
  ARM: imx51: build in pinctrl support
  ARM: dts: imx51-babbage: add pinctrl settings
  ARM: imx53: remove unneeded files and functions
  ARM: imx53: support device tree boot only
  ARM: imx53: decouple device tree boot from board files
  ARM: imx53: build in pinctrl support
  ARM: dts: imx53-smd: add pinctrl settings
  ARM: dts: imx53-evk: add pinctrl settings
  ARM: dts: imx53-ard: add pinctrl settings
  ARM: dts: imx53-qsb: add pinctrl settings
  ARM: imx6q: remove dummy pinctrl state
  ARM: dts: imx6q-sabresd: add pinctrl settings
  ARM: dts: imx6q-arm2: add pinctrl for uart and enet
  ARM: dts: imx6q-sabrelite: add pinctrl for usdhc and enet
  ARM: dts: imx6q: sort iomuxc sub-nodes in name
  ARM: dts: imx6q: name iomuxc sub-nodes following pin function
  ARM: dts: imx6q: improve indentation for fsl,pins
  ARM: efikamx: remove Genesi Efika MX platform files from the tree
  ...

Resolved trivial context conflict in arch/arm/boot/dts/imx51-babbage.dts

It replaces clk_register_clkdev in mxs clock driver with DT lookup.

* tag 'mxs-clk-dt-lookup' of git://git.linaro.org/people/shawnguo/linux-2.6:
  clk: mxs: replace imx23 clk_register_clkdev with clock DT lookup
  clk: mxs: replace imx28 clk_register_clkdev with clock DT lookup

* 'clk-3.7' of git://git.linaro.org/people/mturquette/linux:
  clk: add of_clk_src_onecell_get() support
  clk: ux500: Define smp_twd clock for u8500
  mfd: dbx500: Provide a more accurate smp_twd clock
  clk: ux500: Support for prmcu_rate clock
  clk: Provide option for clk_get_rate to issue hw for new rate
  clock: max77686: Add driver for Maxim 77686 32Khz crystal oscillator.
  ARM: ux500: Switch to use common clock framework
  clk: ux500: Clock definitions for u8500
  clk: ux500: First version of clock definitions for ux500
  clk: ux500: Adapt PRCMU and PRCC clocks for common clk
  clk: versatile: make config option boolean
  clk: add Loongson1B clock support
  arm: mmp: make all SOCs use common clock by default
  clk: mmp: add clock definition for mmp2
  clk: mmp: add clock definition for pxa910
  clk: mmp: add clock definition for pxa168
  clk: mmp: add mmp specific clocks
  clk: convert ARM RealView to common clk
  clk: prima2: move from arch/arm/mach to drivers/clk
  ARM: PRIMA2: convert to common clk and finish full clk tree

- Remove all board files and make mach-mxs a DT-only platform
- Some dts file formatting and style fixing
- DTS update for additional boards and devices

* tag 'mxs-dt-3.7' of git://git.linaro.org/people/shawnguo/linux-2.6: (28 commits)
  ARM: dts: cfa10049: Add the 74HC595 gpio expanders
  ARM: dts: m28evk: Fix MMC WP pin being inverted
  ARM: dts: cfa10049: Add SSP3 to the 10049 board
  ARM: dts: mxs: Add missing address and size cells in SSP nodes
  ARM: mx28evk: Add I2C EEPROM support
  ARM: dts: mxs: Enable USB1 Host on the CFA-10049 expansion board
  ARM: dts: mxs: Add the second I2C adapter to the CFA10049 expansion board
  ARM: dts: mxs: Add I2C1 muxing options for imx28
  ARM: mx28evk: Add LRADC support
  ARM: mx28evk: Add SPI flash support
  ARM: mxs: Update DENX M28 machine and dts file
  ARM: mx28: Add USB PHY overcurrent pinmux
  ARM: mx28: Add SPI 2 pinmux into imx28.dtsi
  ARM: dts: mxs: Add pwm4 muxing options for imx28
  ARM: dts: mxs: Add alternative I2C muxing options for imx28
  ARM: olinuxino: Add gpio-led support
  ARM: mxs: Let mmc0 pin detect be generic
  ARM: mxs: Rename 'hog-gpios'
  ARM: mxs: remove iomux driver
  ARM: mxs: remove platform device codes
  ...

It really becomes an maintenance issue that every time a device needs
to look up (clk_get) a clock we have to patch kernel clock file to call
clk_register_clkdev for that clock.

Since clock DT support which is meant to resolve clock lookup in device
tree is in place, the patch moves imx6q client devices' clock lookup
over to device tree, so that any new lookup to be added at later time
can just get done in DT instead of kernel.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

'pinctrl_gpio_hog' is used to setup the pin functions, and it is not
neccesarily used only for GPIO pins, so remove 'gpio' from its name
to describe a more generic term.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

Now, imx51 device tree kernel calls pinctrl to set up pins.  The
function used to hook up non-DT pin setup is not needed for DT boot
any more.  Remove it from DT image.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

With the imx51 DT board having pinctrl setup define in device tree,
it's time to remove dummy pinctrl state and build in the real imx51
pinctrl support.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

Add pinctrl settings for the exsiting devices in imx51-babbage.dts.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

Now imx53 is a device tree only platform, so the files and functions
used only by non-DT kernel can be removed.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

With device tree kernel provides the equal support as those imx53 board
files, it's time to remove the board files and get imx53 support device
tree only.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

Now, imx53 device tree kernel calls pinctrl to set up pins.  The
functions used to hook up non-DT pin setup is not needed for DT boot
any more.  Remove them from DT image.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

As all imx53 boards booting from device tree have pinctrl set up in dts,
it's time to remove the dummy pinctrl state and build in the real imx53
pinctrl support.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

Add pinctrl settings for the exsiting devices in imx53-smd.dts.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

Add pinctrl settings for the exsiting devices in imx53-evk.dts.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

Add pinctrl settings for the exsiting devices in imx53-ard.dts.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

Add pinctrl settings for existing devices in imx53-qsb.dts.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

As all imx6q boards have pinctrl set up in device tree, it's time to
remove the dummy pinctrl state.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

Add pinctrl settings for existing devices in imx6q-sabresd.dts.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

Add missing pinctrl of uart and enet for imx6q-arm2 board.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

Add missing pinctrl of usdhc and enet for imx6q-sabrelite board.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

Sort iomuxc sub-nodes in name so that the node can be located a little
bit easier.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

Name iomuxc sub-nodes following pin function and hardware manual.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

Change the indentation for property fsl,pins a little bit, so that
the first and the last line get the same indentation with all other
lines.  Then it will be easier to copy and past any of these lines.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

It really becomes a maintenance issue that every time a device needs
to look up (clk_get) a clock we have to patch kernel clock file to call
clk_register_clkdev for that clock.

Since clock DT support which is meant to resolve clock lookup in device
tree is in place, the patch moves imx23 client devices' clock lookup
over to device tree, so that any new lookup to be added at later time
can just get done in DT instead of kernel.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

It really becomes a maintenance issue that every time a device needs
to look up (clk_get) a clock we have to patch kernel clock file to call
clk_register_clkdev for that clock.

Since clock DT support which is meant to resolve clock lookup in device
tree is in place, the patch moves imx28 client devices' clock lookup
over to device tree, so that any new lookup to be added at later time
can just get done in DT instead of kernel.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

mxs-dt-3.7

- Remove all board files and make mach-mxs a DT-only platform
- Some dts file formatting and style fixing
- DTS update for additional boards and devices