- 31 Aug, 2016 26 commits
-
-
Linus Walleij authored
[ Upstream commit 2527ecc9 ] The UserMode (UM) Linux build was failing in gpiolib-of as it requires ioremap()/iounmap() to exist, which is absent from UM. The non-existence of IO memory is negatively defined as CONFIG_NO_IOMEM which means we need to depend on HAS_IOMEM. Cc: stable@vger.kernel.org Cc: Geert Uytterhoeven <geert@linux-m68k.org> Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com>
-
Kent Overstreet authored
[ Upstream commit acc9cf8c ] This patch fixes a cachedev registration-time allocation deadlock. This can deadlock on boot if your initrd auto-registeres bcache devices: Allocator thread: [ 720.727614] INFO: task bcache_allocato:3833 blocked for more than 120 seconds. [ 720.732361] [<ffffffff816eeac7>] schedule+0x37/0x90 [ 720.732963] [<ffffffffa05192b8>] bch_bucket_alloc+0x188/0x360 [bcache] [ 720.733538] [<ffffffff810e6950>] ? prepare_to_wait_event+0xf0/0xf0 [ 720.734137] [<ffffffffa05302bd>] bch_prio_write+0x19d/0x340 [bcache] [ 720.734715] [<ffffffffa05190bf>] bch_allocator_thread+0x3ff/0x470 [bcache] [ 720.735311] [<ffffffff816ee41c>] ? __schedule+0x2dc/0x950 [ 720.735884] [<ffffffffa0518cc0>] ? invalidate_buckets+0x980/0x980 [bcache] Registration thread: [ 720.710403] INFO: task bash:3531 blocked for more than 120 seconds. [ 720.715226] [<ffffffff816eeac7>] schedule+0x37/0x90 [ 720.715805] [<ffffffffa05235cd>] __bch_btree_map_nodes+0x12d/0x150 [bcache] [ 720.716409] [<ffffffffa0522d30>] ? bch_btree_insert_check_key+0x1c0/0x1c0 [bcache] [ 720.717008] [<ffffffffa05236e4>] bch_btree_insert+0xf4/0x170 [bcache] [ 720.717586] [<ffffffff810e6950>] ? prepare_to_wait_event+0xf0/0xf0 [ 720.718191] [<ffffffffa0527d9a>] bch_journal_replay+0x14a/0x290 [bcache] [ 720.718766] [<ffffffff810cc90d>] ? ttwu_do_activate.constprop.94+0x5d/0x70 [ 720.719369] [<ffffffff810cf684>] ? try_to_wake_up+0x1d4/0x350 [ 720.719968] [<ffffffffa05317d0>] run_cache_set+0x580/0x8e0 [bcache] [ 720.720553] [<ffffffffa053302e>] register_bcache+0xe2e/0x13b0 [bcache] [ 720.721153] [<ffffffff81354cef>] kobj_attr_store+0xf/0x20 [ 720.721730] [<ffffffff812a2dad>] sysfs_kf_write+0x3d/0x50 [ 720.722327] [<ffffffff812a225a>] kernfs_fop_write+0x12a/0x180 [ 720.722904] [<ffffffff81225177>] __vfs_write+0x37/0x110 [ 720.723503] [<ffffffff81228048>] ? __sb_start_write+0x58/0x110 [ 720.724100] [<ffffffff812cedb3>] ? security_file_permission+0x23/0xa0 [ 720.724675] [<ffffffff812258a9>] vfs_write+0xa9/0x1b0 [ 720.725275] [<ffffffff8102479c>] ? do_audit_syscall_entry+0x6c/0x70 [ 720.725849] [<ffffffff81226755>] SyS_write+0x55/0xd0 [ 720.726451] [<ffffffff8106a390>] ? do_page_fault+0x30/0x80 [ 720.727045] [<ffffffff816f2cae>] system_call_fastpath+0x12/0x71 The fifo code in upstream bcache can't use the last element in the buffer, which was the cause of the bug: if you asked for a power of two size, it'd give you a fifo that could hold one less than what you asked for rather than allocating a buffer twice as big. Signed-off-by:
Kent Overstreet <kent.overstreet@gmail.com> Tested-by:
Eric Wheeler <bcache@linux.ewheeler.net> Cc: stable@vger.kernel.org Signed-off-by:
-
Eric Wheeler authored
[ Upstream commit d9dc1702 ] register_cache() is supposed to return an error string on error so that register_bcache() will will blkdev_put and cleanup other user counters, but it does not set 'char *err' when cache_alloc() fails (eg, due to memory pressure) and thus register_bcache() performs no cleanup. register_bcache() <----------\ <- no jump to err_close, no blkdev_put() | | +->register_cache() | <- fails to set char *err | | +->cache_alloc() ---/ <- returns error This patch sets `char *err` for this failure case so that register_cache() will cause register_bcache() to correctly jump to err_close and do cleanup. This was tested under OOM conditions that triggered the bug. Signed-off-by:
-
Christian König authored
[ Upstream commit ae5b80d2 ] Looks like some RV6xx have problems with that. bug: https://bugs.freedesktop.org/show_bug.cgi?id=97099Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Christian König authored
[ Upstream commit 9ef8537e ] Seems to cause problems for some older hardware. Kudos to Thom Kouwenhoven for working a lot with the PLLs and figuring this out. Reviewed-by:
-
Oleg Nesterov authored
[ Upstream commit 6c4687cc ] __replace_page() wronlgy calls mem_cgroup_cancel_charge() in "success" path, it should only do this if page_check_address() fails. This means that every enable/disable leads to unbalanced mem_cgroup_uncharge() from put_page(old_page), it is trivial to underflow the page_counter->count and trigger OOM. Reported-and-tested-by:
Brenden Blanco <bblanco@plumgrid.com> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Reviewed-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Michal Hocko <mhocko@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: stable@vger.kernel.org # 3.17+ Fixes: 00501b53 ("mm: memcontrol: rewrite charge API") Link: http://lkml.kernel.org/r/20160817153629.GB29724@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Bart Van Assche authored
[ Upstream commit 1b856086 ] blk_set_queue_dying() can be called while another thread is submitting I/O or changing queue flags, e.g. through dm_stop_queue(). Hence protect the QUEUE_FLAG_DYING flag change with locking. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Mike Snitzer <snitzer@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Christoph Huber authored
[ Upstream commit 3e103a65 ] commit cbaadf0f ("ASoC: atmel_ssc_dai: refactor the startup and shutdown") refactored code such that the SSC is reset on every startup; this breaks duplex audio (e.g. first start audio playback, then start record, causing the playback to stop/hang) Fixes: cbaadf0f (ASoC: atmel_ssc_dai: refactor the startup and shutdown) Signed-off-by:
Christoph Huber <c.huber@bct-electronic.com> Signed-off-by:
Peter Meerwald-Stadler <p.meerwald@bct-electronic.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Sasha Levin authored
[ Upstream commit 45c3b08a ] For resources shared by all cores such as SLC and IOC, only the master core needs to do any setups / enabling / disabling etc. Cc: <stable@vger.kernel.org> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Sasha Levin authored
[ Upstream commit 18b43e89 ] trace_hardirqs_on_caller() in lockdep.c expects to be called before, not after interrupts are actually enabled. The following comment in kernel/locking/lockdep.c substantiates this claim: " /* * We're enabling irqs and according to our state above irqs weren't * already enabled, yet we find the hardware thinks they are in fact * enabled.. someone messed up their IRQ state tracing. */ " An example can be found in include/linux/irqflags.h: do { trace_hardirqs_on(); raw_local_irq_enable(); } while (0) Without this change, we hit the following DEBUG_LOCKS_WARN_ON. [ 7.760000] ------------[ cut here ]------------ [ 7.760000] WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:2711 resume_user_mode_begin+0x48/0xf0 [ 7.770000] DEBUG_LOCKS_WARN_ON(!irqs_disabled()) [ 7.780000] Modules linked in: [ 7.780000] CPU: 0 PID: 1 Comm: init Not tainted 4.7.0-00003-gc668bb9-dirty #366 [ 7.790000] [ 7.790000] Stack Trace: [ 7.790000] arc_unwind_core.constprop.1+0xa4/0x118 [ 7.800000] warn_slowpath_fmt+0x72/0x158 [ 7.800000] resume_user_mode_begin+0x48/0xf0 [ 7.810000] ---[ end trace 6f6a7a8fae20d2f0 ]--- Signed-off-by:
Daniel Mentz <danielmentz@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jim Lin authored
[ Upstream commit 88716a93 ] After a device is disconnected, xhci_stop_device() will be invoked in xhci_bus_suspend(). Also the "disconnect" IRQ will have ISR to invoke xhci_free_virt_device() in this sequence. xhci_irq -> xhci_handle_event -> handle_cmd_completion -> xhci_handle_cmd_disable_slot -> xhci_free_virt_device If xhci->devs[slot_id] has been assigned to NULL in xhci_free_virt_device(), then virt_dev->eps[i].ring in xhci_stop_device() may point to an invlid address to cause kernel panic. virt_dev = xhci->devs[slot_id]; : if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue) [] Unable to handle kernel paging request at virtual address 00001a68 [] pgd=ffffffc001430000 [] [00001a68] *pgd=000000013c807003, *pud=000000013c807003, *pmd=000000013c808003, *pte=0000000000000000 [] Internal error: Oops: 96000006 [#1] PREEMPT SMP [] CPU: 0 PID: 39 Comm: kworker/0:1 Tainted: G U [] Workqueue: pm pm_runtime_work [] task: ffffffc0bc0e0bc0 ti: ffffffc0bc0ec000 task.ti: ffffffc0bc0ec000 [] PC is at xhci_stop_device.constprop.11+0xb4/0x1a4 This issue is found when running with realtek ethernet device (0bda:8153). Signed-off-by:
Jim Lin <jilin@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Mathias Nyman authored
[ Upstream commit 33be1265 ] Fix "Command completion event does not match command" errors by always handling the command ring stopped events. The command ring stopped event is generated as a result of aborting or stopping the command ring with a register write. It is not caused by a command in the command queue, and thus won't have a matching command in the comman list. Solve it by handling the command ring stopped event before checking for a matching command. In most command time out cases we abort the command ring, and get a command ring stopped event. The events command pointer will point at the current command ring dequeue, which in most cases matches the timed out command in the command list, and no error messages are seen. If we instead get a command aborted event before the command ring stopped event, the abort event will increse the command ring dequeue pointer, and the following command ring stopped events command pointer will point at the next, not yet queued command. This case triggered the error message Signed-off-by:
-
Gavin Li authored
[ Upstream commit add12505 ] This fixes the "BOGUS urb xfer" warning logged by usb_submit_urb(). Signed-off-by:
Gavin Li <git@thegavinli.com> Acked-by:
Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Lu Baolu authored
[ Upstream commit 53958751 ] In sg_timeout(), req->status is set to "-ETIMEDOUT" before calling into usb_sg_cancel(). usb_sg_cancel() will do nothing and return directly if req->status has been set to a non-zero value. This will cause driver hang whenever transfer time out is triggered. This patch fixes this issue. It could be backported to stable kernel with version later than v3.15. Cc: stable@vger.kernel.org # 3.15+ Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Suggested-by:
Alan Stern <stern@rowland.harvard.edu> Acked-by:
-
Yoshihiro Shimoda authored
[ Upstream commit 700aa7ff ] This patch fixes an issue that isochronous transfer's data is possible to be lost as a workaround. Since this driver uses a workqueue to start the dmac, the transfer is possible to be delayed when system load is high. Fixes: 6e4b74e4 ("usb: renesas: fix scheduling in atomic context bug") Cc: <stable@vger.kernel.org> # v3.4+ Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Yoshihiro Shimoda authored
[ Upstream commit 9ab967e6 ] This patch fixes an issue that unexpected BRDY interruption happens when the usb_ep_{enable,disable}() are called with different direction. In this case, the driver will cause the following message: renesas_usbhs e6590000.usb: irq_ready run_error 1 : -16 This issue causes the followings: 1) A pipe is enabled as transmission 2) The pipe sent a data 3) The pipe is disabled and re-enabled as reception. 4) The pipe got a queue Since the driver doesn't clear the BRDYSTS flags after 2) above, the issue happens. If we add such clearing the flags into the driver, the code will become complicate. So, this patch clears the BRDYSTS flag of reception in usbhsg_ep_enable() to avoid complicate. Cc: <stable@vger.kernel.org> # v4.1+ (usbhs_xxxsts_clear() is needed) Signed-off-by:
-
Matthew Auld authored
[ Upstream commit 3871f42a ] In i915_ggtt_cleanup_hw we need to remember to free aliasing_ppgtt. This fixes the following kmemleak message: unreferenced object 0xffff880213cca000 (size 8192): comm "modprobe", pid 1298, jiffies 4294745402 (age 703.930s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff817c808e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff8121f9c2>] kmem_cache_alloc_trace+0x142/0x1d0 [<ffffffffa06d11ef>] i915_gem_init_ggtt+0x10f/0x210 [i915] [<ffffffffa06d71bb>] i915_gem_init+0x5b/0xd0 [i915] [<ffffffffa069749a>] i915_driver_load+0x97a/0x1460 [i915] [<ffffffffa06a26ef>] i915_pci_probe+0x4f/0x70 [i915] [<ffffffff81423015>] local_pci_probe+0x45/0xa0 [<ffffffff81424463>] pci_device_probe+0x103/0x150 [<ffffffff81515e6c>] driver_probe_device+0x22c/0x440 [<ffffffff81516151>] __driver_attach+0xd1/0xf0 [<ffffffff8151379c>] bus_for_each_dev+0x6c/0xc0 [<ffffffff8151555e>] driver_attach+0x1e/0x20 [<ffffffff81514fa3>] bus_add_driver+0x1c3/0x280 [<ffffffff81516aa0>] driver_register+0x60/0xe0 [<ffffffff8142297c>] __pci_register_driver+0x4c/0x50 [<ffffffffa013605b>] 0xffffffffa013605b Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Fixes: b18b6bde ("drm/i915/bdw: Free PPGTT struct") Cc: stable@vger.kernel.org Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1470420280-21417-1-git-send-email-matthew.auld@intel.com (cherry picked from commit cb7f2760) Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Agrawal, Nitesh-kumar authored
[ Upstream commit 8cf43455 ] In the function amd_gpio_irq_enable() and amd_gpio_direction_input(), remove the code which is setting the default de-bounce time to 2.75ms. The driver code shall use the same settings as specified in BIOS. Any default assignment impacts TouchPad behaviour when the LevelTrig is set to EDGE FALLING. Cc: stable@vger.kernel.org Reviewed-by:
Ken Xue <Ken.Xue@amd.com> Signed-off-by:
Nitesh Kumar Agrawal <Nitesh-kumar.Agrawal@amd.com> Signed-off-by:
-
Heikki Krogerus authored
[ Upstream commit 4491ed50 ] Intel Kabylake PCH has the same DWC3 than Intel Sunrisepoint. Add the new ID to the supported devices. Cc: <stable@vger.kernel.org> Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
-
Heikki Krogerus authored
[ Upstream commit b4c580a4 ] PCI IDs for Broxton based platforms. Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
John Youn authored
[ Upstream commit 9a5a0783 ] Fix the alignment of the PCI device definitions. Also change the hex digit capitalization of one constant to make it consistent with the rest of the file and driver. Signed-off-by:
John Youn <johnyoun@synopsys.com> Signed-off-by:
-
Felipe Balbi authored
[ Upstream commit 7c705dfe ] If we stop earlier due to short packet, we will not be able to giveback all TRBs. Cc: <stable@vger.kernel.org> Cc: Brian E Rogers <brian.e.rogers@intel.com> Signed-off-by:
-
Felipe Balbi authored
[ Upstream commit e5b36ae2 ] DWC3 has one interesting peculiarity with chained transfers. If we setup N chained transfers and we get a short packet before processing all N TRBs, DWC3 will (conditionally) issue a XferComplete or XferInProgress event and retire all TRBs from the one which got a short packet to the last without clearing their HWO bits. This means SW must clear HWO bit manually, which this patch is doing. Cc: <stable@vger.kernel.org> Cc: Brian E Rogers <brian.e.rogers@intel.com> Signed-off-by:
-
Felipe Balbi authored
[ Upstream commit c7de5734 ] When using SG lists, we would end up setting request->actual to: num_mapped_sgs * (request->length - count) Let's fix that up by incrementing request->actual only once. Cc: <stable@vger.kernel.org> Reported-by:
Brian E Rogers <brian.e.rogers@intel.com> Signed-off-by:
-
Stefan Haberland authored
[ Upstream commit 9ba333dc ] When a device is in a status where CIO has killed all I/O by itself the interrupt for a clear request may not contain an irb to determine the clear function. Instead it contains an error pointer -EIO. This was ignored by the DASD int_handler leading to a hanging device waiting for a clear interrupt. Handle -EIO error pointer correctly for requests that are clear pending and treat the clear as successful. Signed-off-by:
Stefan Haberland <sth@linux.vnet.ibm.com> Reviewed-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: stable@vger.kernel.org Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Marc Ohlf authored
[ Upstream commit bc337b51 ] In ehci_turn_off_all_ports() all EHCI port registers are cleared to zero. On some hardware, this can lead to an system hang, when ehci_port_power() accesses the already cleared registers. This patch changes the order of cleanup. First call ehci_port_power() which respects the current bits in port status registers and afterwards cleanup the hard way by setting everything to zero. Signed-off-by:
Marc Ohlf <ohlf@mkt-sys.de> Acked-by:
-
- 24 Aug, 2016 11 commits
-
-
Viresh Kumar authored
[ Upstream commit 6bb47e8a ] Memory leak and unbalanced reference count: If the hub gets disconnected while the core is still activating it, this can result in leaking memory of few USB structures. This will happen if we have done a kref_get() from hub_activate() and scheduled a delayed work item for HUB_INIT2/3. Now if hub_disconnect() gets called before the delayed work expires, then we will cancel the work from hub_quiesce(), but wouldn't do a kref_put(). And so the unbalance. kmemleak reports this as (with the commit e50293ef backported to 3.10 kernel with other changes, though the same is true for mainline as well): unreferenced object 0xffffffc08af5b800 (size 1024): comm "khubd", pid 73, jiffies 4295051211 (age 6482.350s) hex dump (first 32 bytes): 30 68 f3 8c c0 ff ff ff 00 a0 b2 2e c0 ff ff ff 0h.............. 01 00 00 00 00 00 00 00 00 94 7d 40 c0 ff ff ff ..........}@.... backtrace: [<ffffffc0003079ec>] create_object+0x148/0x2a0 [<ffffffc000cc150c>] kmemleak_alloc+0x80/0xbc [<ffffffc000303a7c>] kmem_cache_alloc_trace+0x120/0x1ac [<ffffffc0006fa610>] hub_probe+0x120/0xb84 [<ffffffc000702b20>] usb_probe_interface+0x1ec/0x298 [<ffffffc0005d50cc>] driver_probe_device+0x160/0x374 [<ffffffc0005d5308>] __device_attach+0x28/0x4c [<ffffffc0005d3164>] bus_for_each_drv+0x78/0xac [<ffffffc0005d4ee0>] device_attach+0x6c/0x9c [<ffffffc0005d42b8>] bus_probe_device+0x28/0xa0 [<ffffffc0005d23a4>] device_add+0x324/0x604 [<ffffffc000700fcc>] usb_set_configuration+0x660/0x6cc [<ffffffc00070a350>] generic_probe+0x44/0x84 [<ffffffc000702914>] usb_probe_device+0x54/0x74 [<ffffffc0005d50cc>] driver_probe_device+0x160/0x374 [<ffffffc0005d5308>] __device_attach+0x28/0x4c Deadlocks: If the hub gets disconnected early enough (i.e. before INIT2/INIT3 are finished and the init_work is still queued), the core may call hub_quiesce() after acquiring interface device locks and it will wait for the work to be cancelled synchronously. But if the work handler is already running in parallel, it may try to acquire the same interface device lock and this may result in deadlock. Fix both the issues by removing the call to cancel_delayed_work_sync(). CC: <stable@vger.kernel.org> #4.4+ Fixes: e50293ef ("USB: fix invalid memory access in hub_activate()") Reported-by:
Manu Gautam <mgautam@codeaurora.org> Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Acked-by:
-
Russell King authored
[ Upstream commit a0118c8b ] Since 6de62f15 ("crypto: algif_hash - Require setkey before accept(2)"), the AF_ALG interface requires userspace to provide a key to any algorithm that has a setkey method. However, the non-HMAC algorithms are not keyed, so setting a key is unnecessary. Fix this by removing the setkey method from the non-keyed hash algorithms. Fixes: 6de62f15 ("crypto: algif_hash - Require setkey before accept(2)") Cc: <stable@vger.kernel.org> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Dave Carroll authored
[ Upstream commit fa00c437 ] In aacraid's ioctl_send_fib() we do two fetches from userspace, one the get the fib header's size and one for the fib itself. Later we use the size field from the second fetch to further process the fib. If for some reason the size from the second fetch is different than from the first fix, we may encounter an out-of- bounds access in aac_fib_send(). We also check the sender size to insure it is not out of bounds. This was reported in https://bugzilla.kernel.org/show_bug.cgi?id=116751 and was assigned CVE-2016-6480. Reported-by:
Pengfei Wang <wpengfeinudt@gmail.com> Fixes: 7c00ffa3 '[SCSI] 2.6 aacraid: Variable FIB size (updated patch)' Cc: stable@vger.kernel.org Signed-off-by:
Dave Carroll <david.carroll@microsemi.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Alexey Klimov authored
[ Upstream commit 647024a7 ] udriver struct allocated by kzalloc() will not be freed if usb_register() and next calls fail. This patch fixes this by adding one more step with kfree(udriver) in error path. Signed-off-by:
Alexey Klimov <klimov.linux@gmail.com> Acked-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Daniele Palmas authored
[ Upstream commit 01d7956b ] This patch adds a set of compositions for Telit LE920A4. Compositions in short are: 0x1207: tty + tty 0x1208: tty + adb + tty + tty 0x1211: tty + adb + ecm 0x1212: tty + adb 0x1213: ecm + tty 0x1214: tty + adb + ecm + tty telit_le922_blacklist_usbcfg3 is reused for compositions 0x1211 and 0x1214 due to the same interfaces positions. Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Sheng-Hui J. Chu authored
[ Upstream commit ae34d12c ] BCM20706V2_EVAL is a WICED dev board designed with FT2232H USB 2.0 UART/FIFO IC. To support BCM920706V2_EVAL dev board for WICED development on Linux. Add the VID(0a5c) and PID(6422) to ftdi_sio driver to allow loading ftdi_sio for this board. Signed-off-by:
Sheng-Hui J. Chu <s.jeffrey.chu@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Robert Deliën authored
[ Upstream commit 6977495c ] Ivium Technologies uses the FTDI VID with custom PIDs for their line of electrochemical interfaces and the PalmSens they developed for PalmSens BV. Signed-off-by:
Robert Delien <robert@delien.nl> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Lubomir Rintel authored
[ Upstream commit cf1b1803 ] The device has four interfaces; the three serial ports ought to be handled by this driver: 00 Diagnostic interface serial port 01 NMEA device serial port 02 Mass storage (sd card) 03 Modem serial port The other product ids listed in the Windows driver are present already. Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Felix Fietkau authored
[ Upstream commit 6b07d9ca ] The code currently assumes that buffered multicast PS frames don't have a pending ACK frame for tx status reporting. However, hostapd sends a broadcast deauth frame on teardown for which tx status is requested. This can lead to the "Have pending ack frames" warning on module reload. Fix this by using ieee80211_free_txskb/ieee80211_purge_tx_queue. Cc: stable@vger.kernel.org Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Jason Baron authored
[ Upstream commit 083ae308 ] The per-socket rate limit for 'challenge acks' was introduced in the context of limiting ack loops: commit f2b2c582 ("tcp: mitigate ACK loops for connections as tcp_sock") And I think it can be extended to rate limit all 'challenge acks' on a per-socket basis. Since we have the global tcp_challenge_ack_limit, this patch allows for tcp_challenge_ack_limit to be set to a large value and effectively rely on the per-socket limit, or set tcp_challenge_ack_limit to a lower value and still prevents a single connections from consuming the entire challenge ack quota. It further moves in the direction of eliminating the global limit at some point, as Eric Dumazet has suggested. This a follow-up to: Subject: tcp: make challenge acks less predictable Cc: Eric Dumazet <edumazet@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Yue Cao <ycao009@ucr.edu> Signed-off-by:
Jason Baron <jbaron@akamai.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 75ff39cc ] Yue Cao claims that current host rate limiting of challenge ACKS (RFC 5961) could leak enough information to allow a patient attacker to hijack TCP sessions. He will soon provide details in an academic paper. This patch increases the default limit from 100 to 1000, and adds some randomization so that the attacker can no longer hijack sessions without spending a considerable amount of probes. Based on initial analysis and patch from Linus. Note that we also have per socket rate limiting, so it is tempting to remove the host limit in the future. v2: randomize the count of challenge acks per second, not the period. Fixes: 282f23c6 ("tcp: implement RFC 5961 3.2") Reported-by:
Yue Cao <ycao009@ucr.edu> Signed-off-by:
Eric Dumazet <edumazet@google.com> Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
- 23 Aug, 2016 1 commit
-
-
Andrew Donnellan authored
[ Upstream commit 949e9b82 ] In eeh_pci_enable(), after making the request to set the new options, we call eeh_ops->wait_state() to check that the request finished successfully. At the moment, if eeh_ops->wait_state() returns 0, we return 0 without checking that it reflects the expected outcome. This can lead to callers further up the chain incorrectly assuming the slot has been successfully unfrozen and continuing to attempt recovery. On powernv, this will occur if pnv_eeh_get_pe_state() or pnv_eeh_get_phb_state() return 0, which in turn occurs if the relevant OPAL call returns OPAL_EEH_STOPPED_MMIO_DMA_FREEZE or OPAL_EEH_PHB_ERROR respectively. On pseries, this will occur if pseries_eeh_get_state() returns 0, which in turn occurs if RTAS reports that the PE is in the MMIO Stopped and DMA Stopped states. Obviously, none of these cases represent a successful completion of a request to thaw MMIO or DMA. Fix the check so that a wait_state() return value of 0 won't be considered successful for the EEH_OPT_THAW_MMIO or EEH_OPT_THAW_DMA cases. Signed-off-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by:
Daniel Axtens <dja@axtens.net> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
- 22 Aug, 2016 1 commit
-
-
Sasha Levin authored
Signed-off-by:
-
- 20 Aug, 2016 1 commit
-
-
James Hogan authored
commit 9b731bcf upstream. Propagate errors from kvm_mips_handle_kseg0_tlb_fault() and kvm_mips_handle_mapped_seg_tlb_fault(), usually triggering an internal error since they normally indicate the guest accessed bad physical memory or the commpage in an unexpected way. Fixes: 858dd5d4 ("KVM/MIPS32: MMU/TLB operations for the Guest.") Fixes: e685c689 ("KVM/MIPS32: Privileged instruction/target branch emulation.") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> [james.hogan@imgtec.com: Backport to v4.7] Signed-off-by:
-
