- 02 Jan, 2021 38 commits
-
-
Eric Biggers authored
Address the following checkpatch warning: WARNING: Use #include <linux/bug.h> instead of <asm/bug.h> Signed-off-by:
Eric Biggers <ebiggers@google.com> Acked-by:
Ard Biesheuvel <ardb@kernel.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Eric Biggers authored
Use the full path in the include guards for the BLAKE2s headers to avoid ambiguity and to match the convention for most files in include/crypto/. Signed-off-by:
-
Eric Biggers authored
The first three fields of 'struct blake2s_state' are used in assembly code, which isn't immediately obvious, so add a comment to this effect. Signed-off-by:
-
Eric Biggers authored
If no key was provided, then don't waste time initializing the block buffer, as its initial contents won't be used. Also, make crypto_blake2s_init() and blake2s() call a single internal function __blake2s_init() which treats the key as optional, rather than conditionally calling blake2s_init() or blake2s_init_key(). This reduces the compiled code size, as previously both blake2s_init() and blake2s_init_key() were being inlined into these two callers, except when the key size passed to blake2s() was a compile-time constant. These optimizations aren't that significant for BLAKE2s. However, the equivalent optimizations will be more significant for BLAKE2b, as everything is twice as big in BLAKE2b. And it's good to keep things consistent rather than making optimizations for BLAKE2b but not BLAKE2s. Signed-off-by:
-
Eric Biggers authored
Add helper functions for shash implementations of BLAKE2s to include/crypto/internal/blake2s.h, taking advantage of __blake2s_update() and __blake2s_final() that were added by the previous patch to share more code between the library and shash implementations. crypto_blake2s_setkey() and crypto_blake2s_init() are usable as shash_alg::setkey and shash_alg::init directly, while crypto_blake2s_update() and crypto_blake2s_final() take an extra 'blake2s_compress_t' function pointer parameter. This allows the implementation of the compression function to be overridden, which is the only part that optimized implementations really care about. The new functions are inline functions (similar to those in sha1_base.h, sha256_base.h, and sm3_base.h) because this avoids needing to add a new module blake2s_helpers.ko, they aren't *too* long, and this avoids indirect calls which are expensive these days. Note that they can't go in blake2s_generic.ko, as that would require selecting CRYPTO_BLAKE2S from CRYPTO_BLAKE2S_X86, which would cause a recursive dependency. Finally, use these new helper functions in the x86 implementation of BLAKE2s. (This part should be a separate patch, but unfortunately the x86 implementation used the exact same function names like "crypto_blake2s_update()", so it had to be updated at the same time.) Signed-off-by:
-
Eric Biggers authored
Move most of blake2s_update() and blake2s_final() into new inline functions __blake2s_update() and __blake2s_final() in include/crypto/internal/blake2s.h so that this logic can be shared by the shash helper functions. This will avoid duplicating this logic between the library and shash implementations. Signed-off-by:
-
Eric Biggers authored
It doesn't make sense for the generic implementation of BLAKE2s to include <crypto/internal/simd.h> and <linux/jump_label.h>, as these are things that would only be useful in an architecture-specific implementation. Remove these unnecessary includes. Acked-by:
-
Eric Biggers authored
The shash_alg structs for the four variants of BLAKE2s are identical except for the algorithm name, driver name, and digest size. So, avoid code duplication by using a macro to define these structs. Acked-by:
-
Eric Biggers authored
The shash_alg structs for the four variants of BLAKE2s are identical except for the algorithm name, driver name, and digest size. So, avoid code duplication by using a macro to define these structs. Acked-by:
-
Christophe JAILLET authored
In case of error, we should call 'clk_disable_unprepare()' to undo a previous 'clk_prepare_enable()' call, as already done in the remove function. Fixes: 406346d2 ("hwrng: ingenic - Add hardware TRNG for Ingenic X1830") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Tested-by:
周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Signed-off-by:
-
Matthias Brugger authored
We are calling the same code for enable and disable the block in various parts of the driver. Put that code into a new function to reduce code duplication. Signed-off-by:
Matthias Brugger <mbrugger@suse.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Acked-by:
Scott Branden <scott.branden@broadcom.com> Signed-off-by:
-
Matthias Brugger authored
When trying to disable the block we bitwise or the control register with value zero. This is confusing as using bitwise or with value zero doesn't have any effect at all. Drop this as we already set the enable bit to zero by appling inverted RNG_RBGEN_MASK. Signed-off-by:
-
Ard Biesheuvel authored
Counter mode is a stream cipher chaining mode that is typically used with inputs that are of arbitrarily length, and so a tail block which is smaller than a full AES block is rule rather than exception. The current ctr(aes) implementation for arm64 always makes a separate call into the assembler routine to process this tail block, which is suboptimal, given that it requires reloading of the AES round keys, and prevents us from handling this tail block using the 5-way stride that we use for better performance on deep pipelines. So let's update the assembler routine so it can handle any input size, and uses NEON permutation instructions and overlapping loads and stores to handle the tail block. This results in a ~16% speedup for 1420 byte blocks on cores with deep pipelines such as ThunderX2. Signed-off-by:
-
Ard Biesheuvel authored
Commit 69b6f2e8 ("crypto: arm64/aes-neon - limit exposed routines if faster driver is enabled") intended to hide modes from the plain NEON driver that are also implemented by the faster bit sliced NEON one if both are enabled. However, the defined() CPP function does not detect if the bit sliced NEON driver is enabled as a module. So instead, let's use IS_ENABLED() here. Fixes: 69b6f2e8 ("crypto: arm64/aes-neon - limit exposed routines if ...") Signed-off-by:
-
Daniele Alessandrelli authored
Add maintainers for the Intel Keem Bay Offload Crypto Subsystem (OCS) Hash Control Unit (HCU) crypto driver. Signed-off-by:
Daniele Alessandrelli <daniele.alessandrelli@intel.com> Acked-by:
Declan Murphy <declan.murphy@intel.com> Signed-off-by:
-
Daniele Alessandrelli authored
Add optional support of sha224 and hmac(sha224). Co-developed-by:
-
Daniele Alessandrelli authored
Add HMAC support to the Keem Bay OCS HCU driver, thus making it provide the following additional transformations: - hmac(sha256) - hmac(sha384) - hmac(sha512) - hmac(sm3) The Keem Bay OCS HCU hardware does not allow "context-switch" for HMAC operations, i.e., it does not support computing a partial HMAC, save its state and then continue it later. Therefore, full hardware acceleration is provided only when possible (e.g., when crypto_ahash_digest() is called); in all other cases hardware acceleration is only partial (OPAD and IPAD calculation is done in software, while hashing is hardware accelerated). Co-developed-by:
-
Declan Murphy authored
Add support for the Hashing Control Unit (HCU) included in the Offload Crypto Subsystem (OCS) of the Intel Keem Bay SoC, thus enabling hardware-accelerated hashing on the Keem Bay SoC for the following algorithms: - sha256 - sha384 - sha512 - sm3 The driver is composed of two files: - 'ocs-hcu.c' which interacts with the hardware and abstracts it by providing an API following the usual paradigm used in hashing drivers / libraries (e.g., hash_init(), hash_update(), hash_final(), etc.). NOTE: this API can block and sleep, since completions are used to wait for the HW to complete the hashing. - 'keembay-ocs-hcu-core.c' which exports the functionality provided by 'ocs-hcu.c' as a ahash crypto driver. The crypto engine is used to provide asynchronous behavior. 'keembay-ocs-hcu-core.c' also takes care of the DMA mapping of the input sg list. The driver passes crypto manager self-tests, including the extra tests (CRYPTO_MANAGER_EXTRA_TESTS=y). Signed-off-by:
Mark Gross <mgross@linux.intel.com> Signed-off-by:
-
Declan Murphy authored
Add device-tree bindings for the Intel Keem Bay Offload Crypto Subsystem (OCS) Hashing Control Unit (HCU) crypto driver. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Corentin Labbe authored
This patchs fixes some remaining style issue. Signed-off-by:
Corentin Labbe <clabbe@baylibre.com> Signed-off-by:
-
Corentin Labbe authored
This patch enable to access usage stats for each algorithm. Signed-off-by:
-
Corentin Labbe authored
With the recent kmap change, some tests which were conditional on CONFIG_DEBUG_HIGHMEM now are enabled by default. This permit to detect a problem in sun4i-ss usage of kmap. sun4i-ss uses two kmap via sg_miter (one for input, one for output), but using two kmap at the same time is hard: "the ordering has to be correct and with sg_miter that's probably hard to get right." (quoting Tlgx) So the easiest solution is to never have two sg_miter/kmap open at the same time. After each use of sg_miter, I store the current index, for being able to resume sg_miter to the right place. Fixes: 6298e948 ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator") Signed-off-by:
-
Corentin Labbe authored
The need_fallback is never initialized and seem to be always true at runtime. So all hardware operations are always bypassed. Fixes: 0ae1f46c ("crypto: sun4i-ss - fallback when length is not multiple of blocksize") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Corentin Labbe authored
Ciphers produce invalid results on BE. Key and IV need to be written in LE. Fixes: 6298e948 ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Corentin Labbe authored
Allwinner A10 and A13 SoC have a version of the SS which produce invalid IV in IVx register. Instead of adding a variant for those, let's convert SS to produce IV directly from data. Fixes: 6298e948 ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Corentin Labbe authored
The optimized cipher function need length multiple of 4 bytes. But it get sometimes odd length. This is due to SG data could be stored with an offset. So the fix is to check also if the offset is aligned with 4 bytes. Fixes: 6298e948 ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Corentin Labbe authored
When running the non-optimized cipher function, SS produce partial random output. This is due to linearize buffers being reseted after each loop. For preserving stack, instead of moving them back to start of function, I move them in sun4i_ss_ctx. Fixes: 8d3bcb99 ("crypto: sun4i-ss - reduce stack usage") Signed-off-by:
-
Tian Tao authored
Remove dev_err() messages after platform_get_irq*() failures. drivers/crypto/inside-secure/safexcel.c: line 1161 is redundant because platform_get_irq() already prints an error Generated by: scripts/coccinelle/api/platform_get_irq.cocci Signed-off-by:
Tian Tao <tiantao6@hisilicon.com> Acked-by:
Antoine Tenart <atenart@kernel.org> Signed-off-by:
-
Ard Biesheuvel authored
The cipher routines in the crypto API are mostly intended for templates implementing skcipher modes generically in software, and shouldn't be used outside of the crypto subsystem. So move the prototypes and all related definitions to a new header file under include/crypto/internal. Also, let's use the new module namespace feature to move the symbol exports into a new namespace CRYPTO_INTERNAL. Signed-off-by:
-
Ard Biesheuvel authored
Allocating a cipher via the crypto API only to free it again after using it to encrypt a single block is unnecessary in cases where the algorithm is known at compile time. So replace this pattern with a call to the AES library. Cc: Ayush Sawal <ayush.sawal@chelsio.com> Cc: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Cc: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by:
-
Tian Tao authored
Remove including <linux/version.h> that don't need it. Signed-off-by:
-
Fabio Estevam authored
Since 5.10-rc1 i.MX is a devicetree-only platform and the existing .id_table support in this driver was only useful for old non-devicetree platforms. Remove the unused .id_table support. Signed-off-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
-
Ard Biesheuvel authored
The signed long type used for printing the number of bytes processed in tcrypt benchmarks limits the range to -/+ 2 GiB, which is not sufficient to cover the performance of common accelerated ciphers such as AES-NI when benchmarked with sec=1. So switch to u64 instead. While at it, fix up a missing printk->pr_cont conversion in the AEAD benchmark. Signed-off-by:
-
Ard Biesheuvel authored
Follow the same approach as the arm64 driver for implementing a version of AES-NI in CBC mode that supports ciphertext stealing. This results in a ~2x speed increase for relatively short inputs (less than 256 bytes), which is relevant given that AES-CBC with ciphertext stealing is used for filename encryption in the fscrypt layer. For larger inputs, the speedup is still significant (~25% on decryption, ~6% on encryption) Tested-by: Eric Biggers <ebiggers@google.com> # x86_64 Signed-off-by:
-
Krzysztof Kozlowski authored
E-mails to Kamil Konieczny to his Samsung address bounce with 550 (User unknown). Kamil no longer takes care about Samsung S5P SSS driver so remove the invalid email address from: - mailmap, - bindings maintainer entries, - maintainers entry for S5P Security Subsystem crypto accelerator. Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Acked-by:
Vladimir Zapolskiy <vz@mleia.com> Signed-off-by:
-
Vic Wu authored
The crypto mediatek driver has been replaced by the inside-secure driver now. Remove this driver to avoid having duplicate drivers. Signed-off-by:
Vic Wu <vic.wu@mediatek.com> Acked-by:
Ryder Lee <ryder.lee@mediatek.com> Signed-off-by:
-
Ard Biesheuvel authored
Pavel reports that commit 17858b14 ("crypto: ecdh - avoid unaligned accesses in ecdh_set_secret()") fixes one problem but introduces another: the unconditional memcpy() introduced by that commit may overflow the target buffer if the source data is invalid, which could be the result of intentional tampering. So check params.key_size explicitly against the size of the target buffer before validating the key further. Fixes: 17858b14 ("crypto: ecdh - avoid unaligned accesses in ecdh_set_secret()") Reported-by:
Pavel Machek <pavel@denx.de> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Ard Biesheuvel authored
Commit 86cd97ec ("crypto: arm/chacha-neon - optimize for non-block size multiples") refactored the chacha block handling in the glue code in a way that may result in the counter increment to be omitted when calling chacha_block_xor_neon() to process a full block. This violates the skcipher API, which requires that the output IV is suitable for handling more input as long as the preceding input has been presented in round multiples of the block size. Also, the same code is exposed via the chacha library interface whose callers may actually rely on this increment to occur even for final blocks that are smaller than the chacha block size. So increment the counter after calling chacha_block_xor_neon(). Fixes: 86cd97ec ("crypto: arm/chacha-neon - optimize for non-block size multiples") Reported-by:
Eric Biggers <ebiggers@kernel.org> Signed-off-by:
-
- 27 Dec, 2020 2 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Since commit 36e2c742 ("fs: don't allow splice read/write without explicit ops") we've required that file operation structures explicitly enable splice support, rather than falling back to the default handlers. Most /proc files use the indirect 'struct proc_ops' to describe their file operations, and were fixed up to support splice earlier in commits 40be821d..b24c30c6, but the mountinfo files interact with the VFS directly using their own 'struct file_operations' and got missed as a result. This adds the necessary support for splice to work for /proc/*/mountinfo and friends. Reported-by:
Joan Bruguera Micó <joanbrugueram@gmail.com> Reported-by:
Jussi Kivilinna <jussi.kivilinna@iki.fi> Link: https://bugzilla.kernel.org/show_bug.cgi?id=209971 Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
