Fix error handling in mana_create_rxq() when
cq->gdma_id >= gc->max_num_cqs.

Fixes: ca9c54d2 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://lore.kernel.org/r/1633698691-31721-1-git-send-email-haiyangz@microsoft.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The cmtp_add_connection() would add a cmtp session to a controller
and run a kernel thread to process cmtp.

	__module_get(THIS_MODULE);
	session->task = kthread_run(cmtp_session, session, "kcmtpd_ctr_%d",
								session->num);

During this process, the kernel thread would call detach_capi_ctr()
to detach a register controller. if the controller
was not attached yet, detach_capi_ctr() would
trigger an array-index-out-bounds bug.

[   46.866069][ T6479] UBSAN: array-index-out-of-bounds in
drivers/isdn/capi/kcapi.c:483:21
[   46.867196][ T6479] index -1 is out of range for type 'capi_ctr *[32]'
[   46.867982][ T6479] CPU: 1 PID: 6479 Comm: kcmtpd_ctr_0 Not tainted
5.15.0-rc2+ #8
[   46.869002][ T6479] Hardware name: QEMU Standard PC (i440FX + PIIX,
1996), BIOS 1.14.0-2 04/01/2014
[   46.870107][ T6479] Call Trace:
[   46.870473][ T6479]  dump_stack_lvl+0x57/0x7d
[   46.870974][ T6479]  ubsan_epilogue+0x5/0x40
[   46.871458][ T6479]  __ubsan_handle_out_of_bounds.cold+0x43/0x48
[   46.872135][ T6479]  detach_capi_ctr+0x64/0xc0
[   46.872639][ T6479]  cmtp_session+0x5c8/0x5d0
[   46.873131][ T6479]  ? __init_waitqueue_head+0x60/0x60
[   46.873712][ T6479]  ? cmtp_add_msgpart+0x120/0x120
[   46.874256][ T6479]  kthread+0x147/0x170
[   46.874709][ T6479]  ? set_kthread_struct+0x40/0x40
[   46.875248][ T6479]  ret_from_fork+0x1f/0x30
[   46.875773][ T6479]
Signed-off-by: Xiaolong Huang <butterflyhuangxx@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20211008065830.305057-1-butterflyhuangxx@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Introduction of lockless subqueues broke the class statistics.
Before the change stats were accumulated in `bstats' and `qstats'
on the stack which was then copied to struct gnet_dump.

After the change the `bstats' and `qstats' are initialized to 0
and never updated, yet still fed to gnet_dump. The code updates
the global qdisc->cpu_bstats and qdisc->cpu_qstats instead,
clobbering them. Most likely a copy-paste error from the code in
mqprio_dump().

__gnet_stats_copy_basic() and __gnet_stats_copy_queue() accumulate
the values for per-CPU case but for global stats they overwrite
the value, so only stats from the last loop iteration / tc end up
in sch->[bq]stats.

Use the on-stack [bq]stats variables again and add the stats manually
in the global case.

Fixes: ce679e8d ("net: sched: add support for TCQ_F_NOLOCK subqueues to sch_mqprio")
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
https://lore.kernel.org/all/20211007175000.2334713-2-bigeasy@linutronix.de/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Vladimir Oltean says:

====================
DSA bridge TX forwarding offload fixes - part 1

This is part 1 of a series of fixes to the bridge TX forwarding offload
feature introduced for v5.15. Sadly, the other fixes are so intrusive
that they cannot be reasonably be sent to the "net" tree, as they also
include API changes. So they are left as part 2 for net-next.
====================

Link: https://lore.kernel.org/r/20211007164711.2897238-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Similar to commit 6087175b ("net: dsa: mt7530: use independent VLAN
learning on VLAN-unaware bridges"), software forwarding between an
unoffloaded LAG port (a bonding interface with an unsupported policy)
and a mv88e6xxx user port directly under a bridge is broken.

We adopt the same strategy, which is to make the standalone ports not
find any ATU entry learned on a bridge port.

Theory: the mv88e6xxx ATU is looked up by FID and MAC address. There are
as many FIDs as VIDs (4096). The FID is derived from the VID when
possible (the VTU maps a VID to a FID), with a fallback to the port
based default FID value when not (802.1Q Mode is disabled on the port,
or the classified VID isn't present in the VTU).

The mv88e6xxx driver makes the following use of FIDs and VIDs:

- the port's DefaultVID (to which untagged & pvid-tagged packets get
  classified) is 0 and is absent from the VTU, so this kind of packets is
  processed in FID 0, the default FID assigned by mv88e6xxx_setup_port.

- every time a bridge VLAN is created, mv88e6xxx_port_vlan_join() ->
  mv88e6xxx_atu_new() associates a FID with that VID which increases
  linearly starting from 1. Like this:

  bridge vlan add dev lan0 vid 100 # FID 1
  bridge vlan add dev lan1 vid 100 # still FID 1
  bridge vlan add dev lan2 vid 1024 # FID 2

The FID allocation made by the driver is sub-optimal for the following
reasons:

(a) A standalone port has a DefaultPVID of 0 and a default FID of 0 too.
    A VLAN-unaware bridged port has a DefaultPVID of 0 and a default FID
    of 0 too. The difference is that the bridged ports may learn ATU
    entries, while the standalone port has the requirement that it must
    not, and must not find them either. Standalone ports must not use
    the same FID as ports belonging to a bridge. All standalone ports
    can use the same FID, since the ATU will never have an entry in
    that FID.

(b) Multiple VLAN-unaware bridges will all use a DefaultPVID of 0 and a
    default FID of 0 on all their ports. The FDBs will not be isolated
    between these bridges. Every VLAN-unaware bridge must use the same
    FID on all its ports, different from the FID of other bridge ports.

(c) Each bridge VLAN uses a unique FID which is useful for Independent
    VLAN Learning, but the same VLAN ID on multiple VLAN-aware bridges
    will result in the same FID being used by mv88e6xxx_atu_new().
    The correct behavior is for VLAN 1 in br0 to have a different FID
    compared to VLAN 1 in br1.

This patch cannot fix all the above. Traditionally the DSA framework did
not care about this, and the reality is that DSA core involvement is
needed for the aforementioned issues to be solved. The only thing we can
solve here is an issue which does not require API changes, and that is
issue (a), aka use a different FID for standalone ports vs ports under
VLAN-unaware bridges.

The first step is deciding what VID and FID to use for standalone ports,
and what VID and FID for bridged ports. The 0/0 pair for standalone
ports is what they used up till now, let's keep using that. For bridged
ports, there are 2 cases:

- VLAN-aware ports will never end up using the port default FID, because
  packets will always be classified to a VID in the VTU or dropped
  otherwise. The FID is the one associated with the VID in the VTU.

- On VLAN-unaware ports, we _could_ leave their DefaultVID (pvid) at
  zero (just as in the case of standalone ports), and just change the
  port's default FID from 0 to a different number (say 1).

However, Tobias points out that there is one more requirement to cater to:
cross-chip bridging. The Marvell DSA header does not carry the FID in
it, only the VID. So once a packet crosses a DSA link, if it has a VID
of zero it will get classified to the default FID of that cascade port.
Relying on a port default FID for upstream cascade ports results in
contradictions: a default FID of 0 breaks ATU isolation of bridged ports
on the downstream switch, a default FID of 1 breaks standalone ports on
the downstream switch.

So not only must standalone ports have different FIDs compared to
bridged ports, they must also have different DefaultVID values.
IEEE 802.1Q defines two reserved VID values: 0 and 4095. So we simply
choose 4095 as the DefaultVID of ports belonging to VLAN-unaware
bridges, and VID 4095 maps to FID 1.

For the xmit operation to look up the same ATU database, we need to put
VID 4095 in DSA tags sent to ports belonging to VLAN-unaware bridges
too. All shared ports are configured to map this VID to the bridging
FID, because they are members of that VLAN in the VTU. Shared ports
don't need to have 802.1QMode enabled in any way, they always parse the
VID from the DSA header, they don't need to look at the 802.1Q header.

We install VID 4095 to the VTU in mv88e6xxx_setup_port(), with the
mention that mv88e6xxx_vtu_setup() which was located right below that
call was flushing the VTU so those entries wouldn't be preserved.
So we need to relocate the VTU flushing prior to the port initialization
during ->setup(). Also note that this is why it is safe to assume that
VID 4095 will get associated with FID 1: the user ports haven't been
created, so there is no avenue for the user to create a bridge VLAN
which could otherwise race with the creation of another FID which would
otherwise use up the non-reserved FID value of 1.

[ Currently mv88e6xxx_port_vlan_join() doesn't have the option of
  specifying a preferred FID, it always calls mv88e6xxx_atu_new(). ]

mv88e6xxx_port_db_load_purge() is the function to access the ATU for
FDB/MDB entries, and it used to determine the FID to use for
VLAN-unaware FDB entries (VID=0) using mv88e6xxx_port_get_fid().
But the driver only called mv88e6xxx_port_set_fid() once, during probe,
so no surprises, the port FID was always 0, the call to get_fid() was
redundant. As much as I would have wanted to not touch that code, the
logic is broken when we add a new FID which is not the port-based
default. Now the port-based default FID only corresponds to standalone
ports, and FDB/MDB entries belong to the bridging service. So while in
the future, when the DSA API will support FDB isolation, we will have to
figure out the FID based on the bridge number, for now there's a single
bridging FID, so hardcode that.

Lastly, the tagger needs to check, when it is transmitting a VLAN
untagged skb, whether it is sending it towards a bridged or a standalone
port. When we see it is bridged we assume the bridge is VLAN-unaware.
Not because it cannot be VLAN-aware but:

- if we are transmitting from a VLAN-aware bridge we are likely doing so
  using TX forwarding offload. That code path guarantees that skbs have
  a vlan hwaccel tag in them, so we would not enter the "else" branch
  of the "if (skb->protocol == htons(ETH_P_8021Q))" condition.

- if we are transmitting on behalf of a VLAN-aware bridge but with no TX
  forwarding offload (no PVT support, out of space in the PVT, whatever),
  we would indeed be transmitting with VLAN 4095 instead of the bridge
  device's pvid. However we would be injecting a "From CPU" frame, and
  the switch won't learn from that - it only learns from "Forward" frames.
  So it is inconsequential for address learning. And VLAN 4095 is
  absolutely enough for the frame to exit the switch, since we never
  remove that VLAN from any port.

Fixes: 57e661aa ("net: dsa: mv88e6xxx: Link aggregation support")
Reported-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The VLAN support in mv88e6xxx has a loaded history. Commit 2ea7a679
("net: dsa: Don't add vlans when vlan filtering is disabled") noticed
some issues with VLAN and decided the best way to deal with them was to
make the DSA core ignore VLANs added by the bridge while VLAN awareness
is turned off. Those issues were never explained, just presented as
"at least one corner case".

That approach had problems of its own, presented by
commit 54a0ed0d ("net: dsa: provide an option for drivers to always
receive bridge VLANs") for the DSA core, followed by
commit 1fb74191 ("net: dsa: mv88e6xxx: fix vlan setup") which
applied ds->configure_vlan_while_not_filtering = true for mv88e6xxx in
particular.

We still don't know what corner case Andrew saw when he wrote
commit 2ea7a679 ("net: dsa: Don't add vlans when vlan filtering is
disabled"), but Tobias now reports that when we use TX forwarding
offload, pinging an external station from the bridge device is broken if
the front-facing DSA user port has flooding turned off. The full
description is in the link below, but for short, when a mv88e6xxx port
is under a VLAN-unaware bridge, it inherits that bridge's pvid.
So packets ingressing a user port will be classified to e.g. VID 1
(assuming that value for the bridge_default_pvid), whereas when
tag_dsa.c xmits towards a user port, it always sends packets using a VID
of 0 if that port is standalone or under a VLAN-unaware bridge - or at
least it did so prior to commit d82f8ab0 ("net: dsa: tag_dsa:
offload the bridge forwarding process").

In any case, when there is a conversation between the CPU and a station
connected to a user port, the station's MAC address is learned in VID 1
but the CPU tries to transmit through VID 0. The packets reach the
intended station, but via flooding and not by virtue of matching the
existing ATU entry.

DSA has established (and enforced in other drivers: sja1105, felix,
mt7530) that a VLAN-unaware port should use a private pvid, and not
inherit the one from the bridge. The bridge's pvid should only be
inherited when that bridge is VLAN-aware, so all state transitions need
to be handled. On the other hand, all bridge VLANs should sit in the VTU
starting with the moment when the bridge offloads them via switchdev,
they are just not used.

This solves the problem that Tobias sees because packets ingressing on
VLAN-unaware user ports now get classified to VID 0, which is also the
VID used by tag_dsa.c on xmit.

Fixes: d82f8ab0 ("net: dsa: tag_dsa: offload the bridge forwarding process")
Link: https://patchwork.kernel.org/project/netdevbpf/patch/20211003222312.284175-2-vladimir.oltean@nxp.com/#24491503Reported-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The present code is structured this way due to an incomplete thought
process. In Documentation/networking/switchdev.rst we document that if a
bridge is VLAN-unaware, then the presence or lack of a pvid on a bridge
port (or on the bridge itself, for that matter) should not affect the
ability to receive and transmit tagged or untagged packets.

If the bridge on behalf of which we are sending this packet is
VLAN-aware, then the TX forwarding offload API ensures that the skb will
be VLAN-tagged (if the packet was sent by user space as untagged, it
will get transmitted town to the driver as tagged with the bridge
device's pvid). But if the bridge is VLAN-unaware, it may or may not be
VLAN-tagged. In fact the logic to insert the bridge's PVID came from the
idea that we should emulate what is being done in the VLAN-aware case.
But we shouldn't.

It appears that injecting packets using a VLAN ID of 0 serves the
purpose of forwarding the packets to the egress port with no VLAN tag
added or stripped by the hardware, and no filtering being performed.
So we can simply remove the superfluous logic.

One reason why this logic is broken is that when CONFIG_BRIDGE_VLAN_FILTERING=n,
we call br_vlan_get_pvid_rcu() but that returns an error and we do error
out, dropping all packets on xmit. Not really smart. This is also an
issue when the user deletes the bridge pvid:

$ bridge vlan del dev br0 vid 1 self

As mentioned, in both cases, packets should still flow freely, and they
do just that on any net device where the bridge is not offloaded, but on
mv88e6xxx they don't.

Fixes: d82f8ab0 ("net: dsa: tag_dsa: offload the bridge forwarding process")
Reported-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patchwork.kernel.org/project/netdevbpf/patch/20211003155141.2241314-1-andrew@lunn.ch/
Link: https://patchwork.kernel.org/project/netdevbpf/patch/20210928233708.1246774-1-vladimir.oltean@nxp.com/Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The dp->bridge_num is zero-based, with -1 being the encoding for an
invalid value. But dsa_bridge_num_put used to check for an invalid value
by comparing bridge_num with 0, which is of course incorrect.

The result is that the bridge_num will never get cleared by
dsa_bridge_num_put, and further port joins to other bridges will get a
bridge_num larger than the previous one, and once all the available
bridges with TX forwarding offload supported by the hardware get
exhausted, the TX forwarding offload feature is simply disabled.

In the case of sja1105, 7 iterations of the loop below are enough to
exhaust the TX forwarding offload bits, and further bridge joins operate
without that feature.

ip link add br0 type bridge vlan_filtering 1

while :; do
        ip link set sw0p2 master br0 && sleep 1
        ip link set sw0p2 nomaster && sleep 1
done

This issue is enough of an indication that having the dp->bridge_num
invalid encoding be a negative number is prone to bugs, so this will be
changed to a one-based value, with the dp->bridge_num of zero being the
indication of no bridge. However, that is material for net-next.

Fixes: f5e165e7 ("net: dsa: track unique bridge numbers across all DSA switch trees")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The nci_core_conn_close_rsp_packet() function will release the conn_info
with given conn_id. However, it needs to set the rf_conn_info to NULL to
prevent other routines like nci_rf_intf_activated_ntf_packet() to trigger
the UAF.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 8f3d65c1 ("net/smc: fix wait on already cleared link")
introduced link refcounting to avoid waits on already cleared links.
This patch extents and improves the refcounting to cover all
remaining possible cases for this kind of error situation.

Fixes: 15e1b99a ("net/smc: no WR buffer wait for terminating link group")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'stmmac-regression-fix'

Herve Codina says:

====================
net: stmmac: fix regression on SPEAr3xx SOC

The ethernet driver used on old SPEAr3xx soc was previously supported on old
kernel. Some regressions were introduced during the different updates leading
to a broken driver for this soc.

This series fixes these regressions and brings back ethernet on SPEAr3xx.
Tested on a SPEAr320 board.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

On SPEAr3xx, ethernet driver is not compatible with the SPEAr600
one.
Indeed, SPEAr3xx uses an earlier version of this IP (v3.40) and
needs some driver tuning compare to SPEAr600.

The v3.40 IP support was added to stmmac driver and this patch
fixes this issue and use the correct compatible string for
SPEAr3xx
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dwmac 3.40a is an old ip version that can be found on SPEAr3xx soc.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dwmac 3.40a is an old ip version that can be found on SPEAr3xx soc.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some old IPs do not provide the hardware feature register.
On these IPs, this register is read 0x00000000.

In old driver version, this feature was handled but a regression came
with the commit f10a6a35 ("stmmac: rework get_hw_feature function").
Indeed, this commit removes the return value in dma->get_hw_feature().
This return value was used to indicate the validity of retrieved
information and used later on in stmmac_hw_init() to override
priv->plat data if this hardware feature were valid.

This patch restores the return code in ->get_hw_feature() in order
to indicate the hardware feature validity and override priv->plat
data only if this hardware feature is valid.

Fixes: f10a6a35 ("stmmac: rework get_hw_feature function")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

recvmsg() can enter an infinite loop if the caller provides the
MSG_WAITALL, the data present in the receive queue is not sufficient to
fulfill the request, and no more data is received by the peer.

When the above happens, mptcp_wait_data() will always return with
no wait, as the MPTCP_DATA_READY flag checked by such function is
set and never cleared in such code path.

Leveraging the above syzbot was able to trigger an RCU stall:

rcu: INFO: rcu_preempt self-detected stall on CPU
rcu:    0-...!: (10499 ticks this GP) idle=0af/1/0x4000000000000000 softirq=10678/10678 fqs=1
        (t=10500 jiffies g=13089 q=109)
rcu: rcu_preempt kthread starved for 10497 jiffies! g13089 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=1
rcu:    Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior.
rcu: RCU grace-period kthread stack dump:
task:rcu_preempt     state:R  running task     stack:28696 pid:   14 ppid:     2 flags:0x00004000
Call Trace:
 context_switch kernel/sched/core.c:4955 [inline]
 __schedule+0x940/0x26f0 kernel/sched/core.c:6236
 schedule+0xd3/0x270 kernel/sched/core.c:6315
 schedule_timeout+0x14a/0x2a0 kernel/time/timer.c:1881
 rcu_gp_fqs_loop+0x186/0x810 kernel/rcu/tree.c:1955
 rcu_gp_kthread+0x1de/0x320 kernel/rcu/tree.c:2128
 kthread+0x405/0x4f0 kernel/kthread.c:327
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
rcu: Stack dump where RCU GP kthread last ran:
Sending NMI from CPU 0 to CPUs 1:
NMI backtrace for cpu 1
CPU: 1 PID: 8510 Comm: syz-executor827 Not tainted 5.15.0-rc2-next-20210920-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:bytes_is_nonzero mm/kasan/generic.c:84 [inline]
RIP: 0010:memory_is_nonzero mm/kasan/generic.c:102 [inline]
RIP: 0010:memory_is_poisoned_n mm/kasan/generic.c:128 [inline]
RIP: 0010:memory_is_poisoned mm/kasan/generic.c:159 [inline]
RIP: 0010:check_region_inline mm/kasan/generic.c:180 [inline]
RIP: 0010:kasan_check_range+0xc8/0x180 mm/kasan/generic.c:189
Code: 38 00 74 ed 48 8d 50 08 eb 09 48 83 c0 01 48 39 d0 74 7a 80 38 00 74 f2 48 89 c2 b8 01 00 00 00 48 85 d2 75 56 5b 5d 41 5c c3 <48> 85 d2 74 5e 48 01 ea eb 09 48 83 c0 01 48 39 d0 74 50 80 38 00
RSP: 0018:ffffc9000cd676c8 EFLAGS: 00000283
RAX: ffffed100e9a110e RBX: ffffed100e9a110f RCX: ffffffff88ea062a
RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff888074d08870
RBP: ffffed100e9a110e R08: 0000000000000001 R09: ffff888074d08877
R10: ffffed100e9a110e R11: 0000000000000000 R12: ffff888074d08000
R13: ffff888074d08000 R14: ffff888074d08088 R15: ffff888074d08000
FS:  0000555556d8e300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
S:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000180 CR3: 0000000068909000 CR4: 00000000001506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 instrument_atomic_read_write include/linux/instrumented.h:101 [inline]
 test_and_clear_bit include/asm-generic/bitops/instrumented-atomic.h:83 [inline]
 mptcp_release_cb+0x14a/0x210 net/mptcp/protocol.c:3016
 release_sock+0xb4/0x1b0 net/core/sock.c:3204
 mptcp_wait_data net/mptcp/protocol.c:1770 [inline]
 mptcp_recvmsg+0xfd1/0x27b0 net/mptcp/protocol.c:2080
 inet6_recvmsg+0x11b/0x5e0 net/ipv6/af_inet6.c:659
 sock_recvmsg_nosec net/socket.c:944 [inline]
 ____sys_recvmsg+0x527/0x600 net/socket.c:2626
 ___sys_recvmsg+0x127/0x200 net/socket.c:2670
 do_recvmmsg+0x24d/0x6d0 net/socket.c:2764
 __sys_recvmmsg net/socket.c:2843 [inline]
 __do_sys_recvmmsg net/socket.c:2866 [inline]
 __se_sys_recvmmsg net/socket.c:2859 [inline]
 __x64_sys_recvmmsg+0x20b/0x260 net/socket.c:2859
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fc200d2dc39
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffc5758e5a8 EFLAGS: 00000246 ORIG_RAX: 000000000000012b
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fc200d2dc39
RDX: 0000000000000002 RSI: 00000000200017c0 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000f0b5ff
R10: 0000000000000100 R11: 0000000000000246 R12: 0000000000000003
R13: 00007ffc5758e5d0 R14: 00007ffc5758e5c0 R15: 0000000000000003

Fix the issue by replacing the MPTCP_DATA_READY bit with direct
inspection of the msk receive queue.

Reported-and-tested-by: syzbot+3360da629681aa0d22fe@syzkaller.appspotmail.com
Fixes: 7a6a6cbc ("mptcp: recvmsg() can drain data from multiple subflow")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull nfsd fixes from Chuck Lever:
 "Bug fixes for NFSD error handling paths"

* tag 'nfsd-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  NFSD: Keep existing listeners on portlist error
  SUNRPC: fix sign error causing rpcsec_gss drops
  nfsd: Fix a warning for nfsd_file_close_inode
  nfsd4: Handle the NFSv4 READDIR 'dircount' hint being zero
  nfsd: fix error handling of register_pernet_subsys() in init_nfsd()

Pull ARM SoC fixes from Arnd Bergmann:
 "This is a larger than normal update for Arm SoC specific code, most of
  it in device trees, but also drivers and the omap and at91/sama7
  platforms:

   - There are four new entries to the MAINTAINERS file: Sven Peter and
     Alyssa Rosenzweig for Apple M1, Romain Perier for Mstar/sigmastar,
     and Vignesh Raghavendra for TI K3

   - Build fixes to address randconfig warnings in sharpsl, dove, omap1,
     and qcom platforms as well as the scmi and op-tee subsystems

   - Regression fixes for missing CONFIG_FB and other options for
     several defconfigs

   - Several bug fixes for the newly added Microchip SAMA7 platform,
     mostly regarding power management

   - Missing SMP barriers to protect accesses to SCMI virtio device

   - Regression fixes for TI OMAP, including a boot-time hang on am335x.

   - Lots of bug fixes for NXP i.MX, mostly addressing incorrect
     settings in devicetree files, and one revert for broken suspend.

   - Fixes for ARM Juno/Vexpress devicetree files, addressing a couple
     of schema warnings.

   - Regression fixes for qualcomm SoC specific drivers and devicetree
     files, reverting an mdt_loader change and at least pastially
     reverting some of the 5.15 DTS changes, plus some minor bugfixes"

* tag 'armsoc-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (64 commits)
  MAINTAINERS: Add Sven Peter as ARM/APPLE MACHINE maintainer
  MAINTAINERS: Add Alyssa Rosenzweig as M1 reviewer
  firmware: arm_scmi: Add proper barriers to scmi virtio device
  firmware: arm_scmi: Simplify spinlocks in virtio transport
  ARM: dts: omap3430-sdp: Fix NAND device node
  bus: ti-sysc: Use CLKDM_NOAUTO for dra7 dcan1 for errata i893
  ARM: sharpsl_param: work around -Wstringop-overread warning
  ARM: defconfig: gemini: Restore framebuffer
  ARM: dove: mark 'putc' as inline
  ARM: omap1: move omap15xx local bus handling to usb.c
  MAINTAINERS: Add Vignesh to TI K3 platform maintainership
  arm64: dts: imx8m*-venice-gw7902: fix M2_RST# gpio
  ARM: imx6: disable the GIC CPU interface before calling stby-poweroff sequence
  arm64: dts: ls1028a: fix eSDHC2 node
  arm64: dts: imx8mm-kontron-n801x-som: do not allow to switch off buck2
  ARM: dts: at91: sama7g5ek: to not touch slew-rate for SDMMC pins
  ARM: dts: at91: sama7g5ek: use proper slew-rate settings for GMACs
  ARM: at91: pm: preload base address of controllers in tlb
  ARM: at91: pm: group constants and addresses loading
  ARM: dts: at91: sama7g5ek: add suspend voltage for ddr3l rail
  ...

Apple SoC fixes for 5.15; just two MAINTAINERS updates.

- MAINTAINERS: Add Sven Peter as ARM/APPLE MACHINE maintainer
- MAINTAINERS: Add Alyssa Rosenzweig as M1 reviewer

* tag 'asahi-soc-fixes-5.15' of https://github.com/AsahiLinux/linux:
  MAINTAINERS: Add Sven Peter as ARM/APPLE MACHINE maintainer
  MAINTAINERS: Add Alyssa Rosenzweig as M1 reviewer

Link: https://lore.kernel.org/r/a50a9015-0e62-c451-4d0d-668233b35b85@marcan.stSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'scmi-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes

SCMI fixes for v5.15

A few fixes addressing:
- Kconfig dependency between VIRTIO and ARM_SCMI_PROTOCOL
- Link-time error with __exit annotation for virtio_scmi_exit
- Unnecessary nested irqsave/irqrestore spinlocks in virtio transport
- Missing SMP barriers to protect accesses to SCMI virtio device

* tag 'scmi-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  firmware: arm_scmi: Add proper barriers to scmi virtio device
  firmware: arm_scmi: Simplify spinlocks in virtio transport
  firmware: arm_scmi: Remove __exit annotation
  firmware: arm_scmi: Fix virtio transport Kconfig dependency

Link: https://lore.kernel.org/r/20211007102822.27886-1-sudeep.holla@arm.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'omap-for-v5.15/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes

Fixes for omaps for v5.15

Few regression fixes for omaps for the v5.15-rc cycle. There is a fix
for boot time hangs that can happen on some am335x devices that started
when the pruss devicetree nodes were added. The other fixes are less
critical:

- Fix compiler warning for sysc_init_soc() that got recently introduced

- Fix external abort for am335x pruss as otherwise some am335x will hang

- Use CLKDM_NOAUTO quirk also for dra7 dcan1

- Fix older NAND device node regression for omap3-sdp

* tag 'omap-for-v5.15/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: omap3430-sdp: Fix NAND device node
  bus: ti-sysc: Use CLKDM_NOAUTO for dra7 dcan1 for errata i893
  soc: ti: omap-prm: Fix external abort for am335x pruss
  bus: ti-sysc: Add break in switch statement in sysc_init_soc()

Link: https://lore.kernel.org/r/pull-1633609552-789682@atomide.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Pull netfslib, cachefiles and afs fixes from David Howells:

 - Fix another couple of oopses in cachefiles tracing stemming from the
   possibility of passing in a NULL object pointer

 - Fix netfs_clear_unread() to set READ on the iov_iter so that source
   it is passed to doesn't do the wrong thing (some drivers look at the
   flag on iov_iter rather than other available information to determine
   the direction)

 - Fix afs_launder_page() to write back at the correct file position on
   the server so as not to corrupt data

* tag 'misc-fixes-20211007' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: Fix afs_launder_page() to set correct start file position
  netfs: Fix READ/WRITE confusion when calling iov_iter_xarray()
  cachefiles: Fix oops with cachefiles_cull() due to NULL object

Merge tag 'perf-tools-fixes-for-v5.15-2021-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix plugin static linking with libopencsd on ARM and ARM64

 - Add missing -lstdc++ when linking with libopencsd

 - Add missing topdown metrics events to 'perf test attr'

 - Plug leak sys_event_tables list after processing JSON vendor events
   entries

 - Sync sound/asound.h copy with the kernel sources

* tag 'perf-tools-fixes-for-v5.15-2021-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf tests attr: Add missing topdown metrics events
  tools include UAPI: Sync sound/asound.h copy with the kernel sources
  perf build: Fix plugin static linking with libopencsd on ARM and ARM64
  perf build: Add missing -lstdc++ when linking with libopencsd
  perf jevents: Free the sys_event_tables list after processing entries

Pull networking fixes from Jakub Kicinski:
 "Including fixes from xfrm, bpf, netfilter, and wireless.

  Current release - regressions:

   - xfrm: fix XFRM_MSG_MAPPING ABI breakage caused by inserting a new
     value in the middle of an enum

   - unix: fix an issue in unix_shutdown causing the other end
     read/write failures

   - phy: mdio: fix memory leak

  Current release - new code bugs:

   - mlx5e: improve MQPRIO resiliency against bad configs

  Previous releases - regressions:

   - bpf: fix integer overflow leading to OOB access in map element
     pre-allocation

   - stmmac: dwmac-rk: fix ethernet on rk3399 based devices

   - netfilter: conntrack: fix boot failure with
     nf_conntrack.enable_hooks=1

   - brcmfmac: revert using ISO3166 country code and 0 rev as fallback

   - i40e: fix freeing of uninitialized misc IRQ vector

   - iavf: fix double unlock of crit_lock

  Previous releases - always broken:

   - bpf, arm: fix register clobbering in div/mod implementation

   - netfilter: nf_tables: correct issues in netlink rule change event
     notifications

   - dsa: tag_dsa: fix mask for trunked packets

   - usb: r8152: don't resubmit rx immediately to avoid soft lockup on
     device unplug

   - i40e: fix endless loop under rtnl if FW fails to correctly respond
     to capability query

   - mlx5e: fix rx checksum offload coexistence with ipsec offload

   - mlx5: force round second at 1PPS out start time and allow it only
     in supported clock modes

   - phy: pcs: xpcs: fix incorrect CL37 AN sequence, EEE disable
     sequence

  Misc:

   - xfrm: slightly rejig the new policy uAPI to make it less cryptic"

* tag 'net-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits)
  net: prefer socket bound to interface when not in VRF
  iavf: fix double unlock of crit_lock
  i40e: Fix freeing of uninitialized misc IRQ vector
  i40e: fix endless loop under rtnl
  dt-bindings: net: dsa: marvell: fix compatible in example
  ionic: move filter sync_needed bit set
  gve: report 64bit tx_bytes counter from gve_handle_report_stats()
  gve: fix gve_get_stats()
  rtnetlink: fix if_nlmsg_stats_size() under estimation
  gve: Properly handle errors in gve_assign_qpl
  gve: Avoid freeing NULL pointer
  gve: Correct available tx qpl check
  unix: Fix an issue in unix_shutdown causing the other end read/write failures
  net: stmmac: trigger PCS EEE to turn off on link down
  net: pcs: xpcs: fix incorrect steps on disable EEE
  netlink: annotate data races around nlk->bound
  net: pcs: xpcs: fix incorrect CL37 AN sequence
  net: sfp: Fix typo in state machine debug string
  net/sched: sch_taprio: properly cancel timer from taprio_destroy()
  net: bridge: fix under estimation in br_get_linkxstats_size()
  ...

Merge tag 'hyperv-fixes-signed-20211007' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull hyperv fixes from Wei Liu:

 - Replace uuid.h with types.h in a header (Andy Shevchenko)

 - Avoid sleeping in atomic context in PCI driver (Long Li)

 - Avoid sending IPI to self when it shouldn't (Vitaly Kuznetsov)

* tag 'hyperv-fixes-signed-20211007' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  x86/hyperv: Avoid erroneously sending IPI to 'self'
  hyper-v: Replace uuid.h with types.h
  PCI: hv: Fix sleep while in non-sleep context when removing child devices from the bus

Hector suggested I should add myself to help him maintain the
platform.
Acked-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Sven Peter <sven@svenpeter.dev>

Add myself as a reviewer for Asahi Linux (Apple M1) patches.

I would like to be CC'ed on Asahi Linux patches for review and testing.
I am also collecting Asahi Linux patches downstream, rebasing on
linux-next periodically, and would like to be notified of what to
cherry-pick from lists.

Cc: Hector Martin <marcan@marcan.st>
Cc: Sven Peter <sven@svenpeter.dev>
Acked-by: Hector Martin <marcan@marcan.st>
Acked-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

The commit 6da5b0f0 ("net: ensure unbound datagram socket to be
chosen when not in a VRF") modified compute_score() so that a device
match is always made, not just in the case of an l3mdev skb, then
increments the score also for unbound sockets. This ensures that
sockets bound to an l3mdev are never selected when not in a VRF.
But as unbound and bound sockets are now scored equally, this results
in the last opened socket being selected if there are matches in the
default VRF for an unbound socket and a socket bound to a dev that is
not an l3mdev. However, handling prior to this commit was to always
select the bound socket in this case. Reinstate this handling by
incrementing the score only for bound sockets. The required isolation
due to choosing between an unbound socket and a socket bound to an
l3mdev remains in place due to the device match always being made.
The same approach is taken for compute_score() for stream sockets.

Fixes: 6da5b0f0 ("net: ensure unbound datagram socket to be chosen when not in a VRF")
Fixes: e7819058 ("net: ensure unbound stream socket to be chosen when not in a VRF")
Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/cf0a8523-b362-1edf-ee78-eef63cbbb428@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf 2021-10-07

We've added 7 non-merge commits during the last 8 day(s) which contain
a total of 8 files changed, 38 insertions(+), 21 deletions(-).

The main changes are:

1) Fix ARM BPF JIT to preserve caller-saved regs for DIV/MOD JIT-internal
   helper call, from Johan Almbladh.

2) Fix integer overflow in BPF stack map element size calculation when
   used with preallocation, from Tatsuhiko Yasumatsu.

3) Fix an AF_UNIX regression due to added BPF sockmap support related
   to shutdown handling, from Jiang Wang.

4) Fix a segfault in libbpf when generating light skeletons from objects
   without BTF, from Kumar Kartikeya Dwivedi.

5) Fix a libbpf memory leak in strset to free the actual struct strset
   itself, from Andrii Nakryiko.

6) Dual-license bpf_insn.h similarly as we did for libbpf and bpftool,
   with ACKs from all contributors, from Luca Boccassi.
====================

Link: https://lore.kernel.org/r/20211007135010.21143-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

ipsec

Steffen Klassert says:

====================
pull request (net): ipsec 2021-10-07

1) Fix a sysbot reported shift-out-of-bounds in xfrm_get_default.
   From Pavel Skripkin.

2) Fix XFRM_MSG_MAPPING ABI breakage. The new XFRM_MSG_MAPPING
   messages were accidentally not paced at the end.
   Fix by Eugene Syromiatnikov.

3) Fix the uapi for the default policy, use explicit field and macros
   and make it accessible to userland.
   From Nicolas Dichtel.

4) Fix a missing rcu lock in xfrm_notify_userpolicy().
   From Nicolas Dichtel.

Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2021-10-06

This series contains updates to i40e and iavf drivers.

Jiri Benc expands an error check to prevent infinite loop for i40e.

Sylwester prevents freeing of uninitialized IRQ vector to resolve a
kernel oops for i40e.

Stefan Assmann fixes a double mutex unlock for iavf.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull devicetree fixes from Rob Herring:

 - Add another allowed address for TI sn65dsi86

 - Drop more redundant minItems/maxItems

 - Fix more graph 'unevaluatedProperties' warnings in media bindings

* tag 'devicetree-fixes-for-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: drm/bridge: ti-sn65dsi86: Fix reg value
  dt-bindings: Drop more redundant 'maxItems/minItems'
  dt-bindings: media: Fix more graph 'unevaluatedProperties' related warnings

If nfsd has existing listening sockets without any processes, then an error
returned from svc_create_xprt() for an additional transport will remove
those existing listeners.  We're seeing this in practice when userspace
attempts to create rpcrdma transports without having the rpcrdma modules
present before creating nfsd kernel processes.  Fix this by checking for
existing sockets before calling nfsd_destroy().
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

The crit_lock mutex could be unlocked twice as reported here
https://lists.osuosl.org/pipermail/intel-wired-lan/Week-of-Mon-20210823/025525.html

Remove the superfluous unlock. Technically the problem was already
present before 5ac49f3c as that commit only replaced the locking
primitive, but no functional change.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 5ac49f3c ("iavf: use mutexes for locking of critical sections")
Fixes: bac84861 ("iavf: Refactor the watchdog state machine")
Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

When VSI set up failed in i40e_probe() as part of PF switch set up
driver was trying to free misc IRQ vectors in
i40e_clear_interrupt_scheme and produced a kernel Oops:

   Trying to free already-free IRQ 266
   WARNING: CPU: 0 PID: 5 at kernel/irq/manage.c:1731 __free_irq+0x9a/0x300
   Workqueue: events work_for_cpu_fn
   RIP: 0010:__free_irq+0x9a/0x300
   Call Trace:
   ? synchronize_irq+0x3a/0xa0
   free_irq+0x2e/0x60
   i40e_clear_interrupt_scheme+0x53/0x190 [i40e]
   i40e_probe.part.108+0x134b/0x1a40 [i40e]
   ? kmem_cache_alloc+0x158/0x1c0
   ? acpi_ut_update_ref_count.part.1+0x8e/0x345
   ? acpi_ut_update_object_reference+0x15e/0x1e2
   ? strstr+0x21/0x70
   ? irq_get_irq_data+0xa/0x20
   ? mp_check_pin_attr+0x13/0xc0
   ? irq_get_irq_data+0xa/0x20
   ? mp_map_pin_to_irq+0xd3/0x2f0
   ? acpi_register_gsi_ioapic+0x93/0x170
   ? pci_conf1_read+0xa4/0x100
   ? pci_bus_read_config_word+0x49/0x70
   ? do_pci_enable_device+0xcc/0x100
   local_pci_probe+0x41/0x90
   work_for_cpu_fn+0x16/0x20
   process_one_work+0x1a7/0x360
   worker_thread+0x1cf/0x390
   ? create_worker+0x1a0/0x1a0
   kthread+0x112/0x130
   ? kthread_flush_work_fn+0x10/0x10
   ret_from_fork+0x1f/0x40

The problem is that at that point misc IRQ vectors
were not allocated yet and we get a call trace
that driver is trying to free already free IRQ vectors.

Add a check in i40e_clear_interrupt_scheme for __I40E_MISC_IRQ_REQUESTED
PF state before calling i40e_free_misc_vector. This state is set only if
misc IRQ vectors were properly initialized.

Fixes: c17401a1 ("i40e: use separate state bit for miscellaneous IRQ setup")
Reported-by: PJ Waskiewicz <pwaskiewicz@jumptrading.com>
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The loop in i40e_get_capabilities can never end. The problem is that
although i40e_aq_discover_capabilities returns with an error if there's
a firmware problem, the returned error is not checked. There is a check for
pf->hw.aq.asq_last_status but that value is set to I40E_AQ_RC_OK on most
firmware problems.

When i40e_aq_discover_capabilities encounters a firmware problem, it will
encounter the same problem on its next invocation. As the result, the loop
becomes endless. We hit this with I40E_ERR_ADMIN_QUEUE_TIMEOUT but looking
at the code, it can happen with a range of other firmware errors.

I don't know what the correct behavior should be: whether the firmware
should be retried a few times, or whether pf->hw.aq.asq_last_status should
be always set to the encountered firmware error (but then it would be
pointless and can be just replaced by the i40e_aq_discover_capabilities
return value). However, the current behavior with an endless loop under the
rtnl mutex(!) is unacceptable and Intel has not submitted a fix, although we
explained the bug to them 7 months ago.

This may not be the best possible fix but it's better than hanging the whole
system on a firmware bug.

Fixes: 56a62fc8 ("i40e: init code and hardware support")
Tested-by: Stefan Assmann <sassmann@redhat.com>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

__send_ipi_mask_ex() uses an optimization: when the target CPU mask is
equal to 'cpu_present_mask' it uses 'HV_GENERIC_SET_ALL' format to avoid
converting the specified cpumask to VP_SET. This case was overlooked when
'exclude_self' parameter was added. As the result, a spurious IPI to
'self' can be send.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Fixes: dfb5c1e1 ("x86/hyperv: remove on-stack cpumask from hv_send_ipi_mask_allbutself")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20211006125016.941616-1-vkuznets@redhat.comSigned-off-by: Wei Liu <wei.liu@kernel.org>

Merge tag 'imx-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 5.15, round 2:

- A couple of fixes from Haibo Chen to update SPI NOR TX bus width for
  i.MX6 and i.MX8 boards.  This becomes necessary because spi-nor driver
  starts using the setting in DT.
- Mark buck2 always-on for i.MX8MM Kontron-n801x-som board to avoid the
  core supply being turned off unexpectedly.
- Fix eSDHC2 device tree settings for LS1028A SoC.
- Disable GIC CPU interface before calling stby-poweroff sequence to fix
  power-off failure on i.MX6.
- Fix M2_RST# GPIO pinmux on i.MX8M venice-gw7902 boards.

* tag 'imx-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: imx8m*-venice-gw7902: fix M2_RST# gpio
  ARM: imx6: disable the GIC CPU interface before calling stby-poweroff sequence
  arm64: dts: ls1028a: fix eSDHC2 node
  arm64: dts: imx8mm-kontron-n801x-som: do not allow to switch off buck2
  arm64: dts: imx8: change the spi-nor tx
  ARM: dts: imx: change the spi-nor tx

Link: https://lore.kernel.org/r/20211006125734.GA10197@dragonSigned-off-by: Arnd Bergmann <arnd@arndb.de>

While the MV88E6390 switch chip exists, one is supposed to use a
compatible of "marvell,mv88e6190" for it. Fix this in the given example.
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Fixes: a3c53be5 ("net: dsa: mv88e6xxx: Support multiple MDIO busses")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the setting of the filter-sync-needed bit to the error
case in the filter add routine to be sure we're checking the
live filter status rather than a copy of the pre-sync status.

Fixes: 969f8439 ("ionic: sync the filters in the work task")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>