Pull HSI updates from Sebastian Reichel:
 "Misc cleanups"

* tag 'hsi-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
  HSI: core: fix a kernel-doc markup
  HSI: omap_ssi: Don't jump to free ID in ssi_add_controller()

Merge tag 'pwm/for-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "This is a fairly big release cycle from the PWM framework's point of
  view.

  There's a large patcheset here which converts drivers to use the new
  devm_platform_ioremap_resource() helper and a bunch of minor fixes to
  existing drivers. Some of the existing drivers also add support for
  more hardware, such as Atmel SAMA 5D2 and Mediatek MT8183.

  Finally there's a couple of new drivers for Intel Keem Bay and LGM
  SoCs as well as the DesignWare PWM controller"

* tag 'pwm/for-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (66 commits)
  pwm: sun4i: Remove erroneous else branch
  pwm: sl28cpld: Set driver data before registering the PWM chip
  pwm: Remove unused function pwmchip_add_inversed()
  pwm: imx27: Fix overflow for bigger periods
  pwm: bcm2835: Support apply function for atomic configuration
  pwm: keembay: Fix build failure with -Os
  pwm: core: Use octal permission
  pwm: lpss: Make compilable with COMPILE_TEST
  pwm: Fix dependencies on HAS_IOMEM
  pwm: Use -EINVAL for unsupported polarity
  pwm: sti: Remove unnecessary blank line
  pwm: sti: Avoid conditional gotos
  pwm: Add PWM fan controller driver for LGM SoC
  Add DT bindings YAML schema for PWM fan controller of LGM SoC
  pwm: Add DesignWare PWM Controller Driver
  dt-bindings: pwm: mtk-disp: add MT8167 SoC binding
  pwm: mediatek: Add MT8183 SoC support
  pwm: mediatek: Always use bus clock
  dt-bindings: pwm: pwm-mediatek: Add documentation for MT8183 SoC
  pwm: Add PWM driver for Intel Keem Bay
  ...

Merge still more updates from Andrew Morton:
 "18 patches.

  Subsystems affected by this patch series: mm (memcg and cleanups) and
  epoll"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/Kconfig: fix spelling mistake "whats" -> "what's"
  selftests/filesystems: expand epoll with epoll_pwait2
  epoll: wire up syscall epoll_pwait2
  epoll: add syscall epoll_pwait2
  epoll: convert internal api to timespec64
  epoll: eliminate unnecessary lock for zero timeout
  epoll: replace gotos with a proper loop
  epoll: pull all code between fetch_events and send_event into the loop
  epoll: simplify and optimize busy loop logic
  epoll: move eavail next to the list_empty_careful check
  epoll: pull fatal signal checks into ep_send_events()
  epoll: simplify signal handling
  epoll: check for events when removing a timed out thread from the wait queue
  mm/memcontrol:rewrite mem_cgroup_page_lruvec()
  mm, kvm: account kvm_vcpu_mmap to kmemcg
  mm/memcg: remove unused definitions
  mm/memcg: warning on !memcg after readahead page charged
  mm/memcg: bail early from swap accounting if memcg disabled

There is a spelling mistake in the Kconfig help text. Fix it.

Link: https://lkml.kernel.org/r/20201217172717.58203-1-colin.king@canonical.comSigned-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Code coverage for the epoll_pwait2 syscall.

epoll62: Repeat basic test epoll1, but exercising the new syscall.
epoll63: Pass a timespec and exercise the timeout wakeup path.

Link: https://lkml.kernel.org/r/20201121144401.3727659-5-willemdebruijn.kernel@gmail.comSigned-off-by: Willem de Bruijn <willemb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Split off from prev patch in the series that implements the syscall.

Link: https://lkml.kernel.org/r/20201121144401.3727659-4-willemdebruijn.kernel@gmail.comSigned-off-by: Willem de Bruijn <willemb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add syscall epoll_pwait2, an epoll_wait variant with nsec resolution that
replaces int timeout with struct timespec.  It is equivalent otherwise.

    int epoll_pwait2(int fd, struct epoll_event *events,
                     int maxevents,
                     const struct timespec *timeout,
                     const sigset_t *sigset);

The underlying hrtimer is already programmed with nsec resolution.
pselect and ppoll also set nsec resolution timeout with timespec.

The sigset_t in epoll_pwait has a compat variant. epoll_pwait2 needs
the same.

For timespec, only support this new interface on 2038 aware platforms
that define __kernel_timespec_t. So no CONFIG_COMPAT_32BIT_TIME.

Link: https://lkml.kernel.org/r/20201121144401.3727659-3-willemdebruijn.kernel@gmail.comSigned-off-by: Willem de Bruijn <willemb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "add epoll_pwait2 syscall", v4.

Enable nanosecond timeouts for epoll.

Analogous to pselect and ppoll, introduce an epoll_wait syscall
variant that takes a struct timespec instead of int timeout.

This patch (of 4):

Make epoll more consistent with select/poll: pass along the timeout as
timespec64 pointer.

In anticipation of additional changes affecting all three polling
mechanisms:

- add epoll_pwait2 syscall with timespec semantics,
  and share poll_select_set_timeout implementation.
- compute slack before conversion to absolute time,
  to save one ktime_get_ts64 call.

Link: https://lkml.kernel.org/r/20201121144401.3727659-1-willemdebruijn.kernel@gmail.com
Link: https://lkml.kernel.org/r/20201121144401.3727659-2-willemdebruijn.kernel@gmail.comSigned-off-by: Willem de Bruijn <willemb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We call ep_events_available() under lock when timeout is 0, and then call
it without locks in the loop for the other cases.

Instead, call ep_events_available() without lock for all cases.  For
non-zero timeouts, we will recheck after adding the thread to the wait
queue.  For zero timeout cases, by definition, user is opportunistically
polling and will have to call epoll_wait again in the future.

Note that this lock was kept in c5a282e9 because the whole loop was
historically under lock.

This patch results in a 1% CPU/RPC reduction in RPC benchmarks.

Link: https://lkml.kernel.org/r/20201106231635.3528496-9-soheil.kdev@gmail.comSigned-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Khazhismel Kumykov <khazhy@google.com>
Cc: Guantao Liu <guantaol@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The existing loop is pointless, and the labels make it really hard to
follow the structure.

Replace that control structure with a simple loop that returns when there
are new events, there is a signal, or the thread has timed out.

Link: https://lkml.kernel.org/r/20201106231635.3528496-8-soheil.kdev@gmail.comSigned-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Khazhismel Kumykov <khazhy@google.com>
Cc: Guantao Liu <guantaol@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is a no-op change which simplifies the follow up patches.

Link: https://lkml.kernel.org/r/20201106231635.3528496-7-soheil.kdev@gmail.comSigned-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Khazhismel Kumykov <khazhy@google.com>
Cc: Guantao Liu <guantaol@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ep_events_available() is called multiple times around the busy loop logic,
even though the logic is generally not used.  ep_reset_busy_poll_napi_id()
is similarly always called, even when busy loop is not used.

Eliminate ep_reset_busy_poll_napi_id() and inline it inside
ep_busy_loop().  Make ep_busy_loop() return whether there are any events
available after the busy loop.  This will eliminate unnecessary loads and
branches, and simplifies the loop.

Link: https://lkml.kernel.org/r/20201106231635.3528496-6-soheil.kdev@gmail.comSigned-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Khazhismel Kumykov <khazhy@google.com>
Cc: Guantao Liu <guantaol@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is a no-op change and simply to make the code more coherent.

Link: https://lkml.kernel.org/r/20201106231635.3528496-5-soheil.kdev@gmail.comSigned-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Khazhismel Kumykov <khazhy@google.com>
Cc: Guantao Liu <guantaol@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

To simplify the code, pull in checking the fatal signals into
ep_send_events().  ep_send_events() is called only from ep_poll().

Note that, previously, we were always checking fatal events, but it is
checked only if eavail is true.  This should be fine because the goal of
that check is to quickly return from epoll_wait() when there is a pending
fatal signal.

Link: https://lkml.kernel.org/r/20201106231635.3528496-4-soheil.kdev@gmail.comSigned-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Suggested-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Khazhismel Kumykov <khazhy@google.com>
Cc: Guantao Liu <guantaol@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Check signals before locking ep->lock, and immediately return -EINTR if
there is any signal pending.

This saves a few loads, stores, and branches from the hot path and
simplifies the loop structure for follow up patches.

Link: https://lkml.kernel.org/r/20201106231635.3528496-3-soheil.kdev@gmail.comSigned-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Khazhismel Kumykov <khazhy@google.com>
Cc: Guantao Liu <guantaol@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "simplify ep_poll".

This patch series is a followup based on the suggestions and feedback by
Linus:
https://lkml.kernel.org/r/CAHk-=wizk=OxUyQPbO8MS41w2Pag1kniUV5WdD5qWL-gq1kjDA@mail.gmail.com

The first patch in the series is a fix for the epoll race in presence of
timeouts, so that it can be cleanly backported to all affected stable
kernels.

The rest of the patch series simplify the ep_poll() implementation.  Some
of these simplifications result in minor performance enhancements as well.
We have kept these changes under self tests and internal benchmarks for a
few days, and there are minor (1-2%) performance enhancements as a result.

This patch (of 8):

After abc610e0 ("fs/epoll: avoid barrier after an epoll_wait(2)
timeout"), we break out of the ep_poll loop upon timeout, without checking
whether there is any new events available.  Prior to that patch-series we
always called ep_events_available() after exiting the loop.

This can cause races and missed wakeups.  For example, consider the
following scenario reported by Guantao Liu:

Suppose we have an eventfd added using EPOLLET to an epollfd.

Thread 1: Sleeps for just below 5ms and then writes to an eventfd.
Thread 2: Calls epoll_wait with a timeout of 5 ms. If it sees an
          event of the eventfd, it will write back on that fd.
Thread 3: Calls epoll_wait with a negative timeout.

Prior to abc610e0, it is guaranteed that Thread 3 will wake up either
by Thread 1 or Thread 2.  After abc610e0, Thread 3 can be blocked
indefinitely if Thread 2 sees a timeout right before the write to the
eventfd by Thread 1.  Thread 2 will be woken up from
schedule_hrtimeout_range and, with evail 0, it will not call
ep_send_events().

To fix this issue:
1) Simplify the timed_out case as suggested by Linus.
2) while holding the lock, recheck whether the thread was woken up
   after its time out has reached.

Note that (2) is different from Linus' original suggestion: It do not set
"eavail = ep_events_available(ep)" to avoid unnecessary contention (when
there are too many timed-out threads and a small number of events), as
well as races mentioned in the discussion thread.

This is the first patch in the series so that the backport to stable
releases is straightforward.

Link: https://lkml.kernel.org/r/20201106231635.3528496-1-soheil.kdev@gmail.com
Link: https://lkml.kernel.org/r/CAHk-=wizk=OxUyQPbO8MS41w2Pag1kniUV5WdD5qWL-gq1kjDA@mail.gmail.com
Link: https://lkml.kernel.org/r/20201106231635.3528496-2-soheil.kdev@gmail.com
Fixes: abc610e0 ("fs/epoll: avoid barrier after an epoll_wait(2) timeout")
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Tested-by: Guantao Liu <guantaol@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Guantao Liu <guantaol@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Khazhismel Kumykov <khazhy@google.com>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mem_cgroup_page_lruvec() in memcontrol.c and mem_cgroup_lruvec() in
memcontrol.h is very similar except for the param(page and memcg) which
also can be convert to each other.

So rewrite mem_cgroup_page_lruvec() with mem_cgroup_lruvec().

[alex.shi@linux.alibaba.com: add missed warning in mem_cgroup_lruvec]
  Link: https://lkml.kernel.org/r/94f17bb7-ec61-5b72-3555-fabeb5a4d73b@linux.alibaba.com
[lstoakes@gmail.com: warn on missing memcg on mem_cgroup_page_lruvec()]
  Link: https://lkml.kernel.org/r/20201125112202.387009-1-lstoakes@gmail.com

Link: https://lkml.kernel.org/r/20201108143731.GA74138@rlkSigned-off-by: Hui Su <sh_def@163.com>
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Cc: Chris Down <chris@chrisdown.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

A VCPU of a VM can allocate couple of pages which can be mmap'ed by the
user space application. At the moment this memory is not charged to the
memcg of the VMM. On a large machine running large number of VMs or
small number of VMs having large number of VCPUs, this unaccounted
memory can be very significant. So, charge this memory to the memcg of
the VMM. Please note that lifetime of these allocations corresponds to
the lifetime of the VMM.

Link: https://lkml.kernel.org/r/20201106202923.2087414-1-shakeelb@google.comSigned-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Some definitions are left unused, just clean them.

Link: https://lkml.kernel.org/r/20201108003834.12669-1-richard.weiyang@gmail.comSigned-off-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add VM_WARN_ON_ONCE_PAGE() macro.

Since readahead page is charged on memcg too, in theory we don't have to
check this exception now.  Before safely remove them all, add a warning
for the unexpected !memcg.

Link: https://lkml.kernel.org/r/1604283436-18880-3-git-send-email-alex.shi@linux.alibaba.comSigned-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "bail out early for memcg disable".

These 2 patches are indepenedent from per memcg lru lock, and may
encounter unexpected warning, so let's move out them from per memcg
lru locking patchset.

This patch (of 2):

We could bail out early when memcg wasn't enabled.

Link: https://lkml.kernel.org/r/1604283436-18880-1-git-send-email-alex.shi@linux.alibaba.com
Link: https://lkml.kernel.org/r/1604283436-18880-2-git-send-email-alex.shi@linux.alibaba.comSigned-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If iter->count is 0 and iocb->ki_pos is page aligned, this causes
nr_pages to be 0.

Then in generic_file_buffered_read_get_pages() find_get_pages_contig()
returns 0 - because we asked for 0 pages, so we call
generic_file_buffered_read_no_cached_page() which attempts to add a page
to the page cache, which fails with -EEXIST, and then we loop. Oops...
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Reported-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull xfs updates from Darrick Wong:
 "In this release we add the ability to set a 'needsrepair' flag
  indicating that we /know/ the filesystem requires xfs_repair, but
  other than that, it's the usual strengthening of metadata validation
  and miscellaneous cleanups.

  Summary:

   - Introduce a "needsrepair" "feature" to flag a filesystem as needing
     a pass through xfs_repair. This is key to enabling filesystem
     upgrades (in xfs_db) that require xfs_repair to make minor
     adjustments to metadata.

   - Refactor parameter checking of recovered log intent items so that
     we actually use the same validation code as them that generate the
     intent items.

   - Various fixes to online scrub not reacting correctly to directory
     entries pointing to inodes that cannot be igetted.

   - Refactor validation helpers for data and rt volume extents.

   - Refactor XFS_TRANS_DQ_DIRTY out of existence.

   - Fix a longstanding bug where mounting with "uqnoenforce" would
     start user quotas in non-enforcing mode but /proc/mounts would
     display "usrquota", implying that they are being enforced.

   - Don't flag dax+reflink inodes as corruption since that is a valid
     (but not fully functional) combination right now.

   - Clean up raid stripe validation functions.

   - Refactor the inode allocation code to be more straightforward.

   - Small prep cleanup for idmapping support.

   - Get rid of the xfs_buf_t typedef"

* tag 'xfs-5.11-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (40 commits)
  xfs: remove xfs_buf_t typedef
  fs/xfs: convert comma to semicolon
  xfs: open code updating i_mode in xfs_set_acl
  xfs: remove xfs_vn_setattr_nonsize
  xfs: kill ialloced in xfs_dialloc()
  xfs: spilt xfs_dialloc() into 2 functions
  xfs: move xfs_dialloc_roll() into xfs_dialloc()
  xfs: move on-disk inode allocation out of xfs_ialloc()
  xfs: introduce xfs_dialloc_roll()
  xfs: convert noroom, okalloc in xfs_dialloc() to bool
  xfs: don't catch dax+reflink inodes as corruption in verifier
  xfs: fix the forward progress assertion in xfs_iwalk_run_callbacks
  xfs: remove unneeded return value check for *init_cursor()
  xfs: introduce xfs_validate_stripe_geometry()
  xfs: show the proper user quota options
  xfs: remove the unused XFS_B_FSB_OFFSET macro
  xfs: remove unnecessary null check in xfs_generic_create
  xfs: directly return if the delta equal to zero
  xfs: check tp->t_dqinfo value instead of the XFS_TRANS_DQ_DIRTY flag
  xfs: delete duplicated tp->t_dqinfo null check and allocation
  ...

Pull ktest updates from Steven Rostedt:
 "No new features. Just a couple of fixes that I had in my local
  repository that fixed issues with sending the result emails"

* tag 'ktest-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest.pl: Fix the logic for truncating the size of the log file for email
  ktest.pl: If size of log is too big to email, email error message

Pull more drm updates from Daniel Vetter:
 "UAPI Changes:

   - Only enable char/agp uapi when CONFIG_DRM_LEGACY is set

  Cross-subsystem Changes:

   - vma_set_file helper to make vma->vm_file changing less brittle,
     acked by Andrew

  Core Changes:

   - dma-buf heaps improvements

   - pass full atomic modeset state to driver callbacks

   - shmem helpers: cached bo by default

   - cleanups for fbdev, fb-helpers

   - better docs for drm modes and SCALING_FITLER uapi

   - ttm: fix dma32 page pool regression

  Driver Changes:

   - multi-hop regression fixes for amdgpu, radeon, nouveau

   - lots of small amdgpu hw enabling fixes (display, pm, ...)

   - fixes for imx, mcde, meson, some panels, virtio, qxl, i915, all
     fairly minor

   - some cleanups for legacy drm/fbdev drivers"

* tag 'drm-next-2020-12-18' of git://anongit.freedesktop.org/drm/drm: (117 commits)
  drm/qxl: don't allocate a dma_address array
  drm/nouveau: fix multihop when move doesn't work.
  drm/i915/tgl: Fix REVID macros for TGL to fetch correct stepping
  drm/i915: Fix mismatch between misplaced vma check and vma insert
  drm/i915/perf: also include Gen11 in OATAILPTR workaround
  Revert "drm/i915: re-order if/else ladder for hpd_irq_setup"
  drm/amdgpu/disply: fix documentation warnings in display manager
  drm/amdgpu: print mmhub client name for dimgrey_cavefish
  drm/amdgpu: set mode1 reset as default for dimgrey_cavefish
  drm/amd/display: Add get_dig_frontend implementation for DCEx
  drm/radeon: remove h from printk format specifier
  drm/amdgpu: remove h from printk format specifier
  drm/amdgpu: Fix spelling mistake "Heterogenous" -> "Heterogeneous"
  drm/amdgpu: fix regression in vbios reservation handling on headless
  drm/amdgpu/SRIOV: Extend VF reset request wait period
  drm/amdkfd: correct amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu log.
  drm/amd/display: Adding prototype for dccg21_update_dpp_dto()
  drm/amdgpu: print what method we are using for runtime pm
  drm/amdgpu: simplify logic in atpx resume handling
  drm/amdgpu: no need to call pci_ignore_hotplug for _PR3
  ...

Pull thermal fixlet from Daniel Lezcano:
 "A trivial change which fell through the cracks:

  Add Alder Lake support ACPI ids (Srinivas Pandruvada)"

* tag 'thermal-v5.11-2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
  thermal: int340x: Support Alder Lake

Pull more s390 updates from Heiko Carstens:
 "This is mainly to decouple udelay() and arch_cpu_idle() and simplify
  both of them.

  Summary:

   - Always initialize kernel stack backchain when entering the kernel,
     so that unwinding works properly.

   - Fix stack unwinder test case to avoid rare interrupt stack
     corruption.

   - Simplify udelay() and just let it busy loop instead of implementing
     a complex logic.

   - arch_cpu_idle() cleanup.

   - Some other minor improvements"

* tag 's390-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/zcrypt: convert comma to semicolon
  s390/idle: allow arch_cpu_idle() to be kprobed
  s390/idle: remove raw_local_irq_save()/restore() from arch_cpu_idle()
  s390/idle: merge enabled_wait() and arch_cpu_idle()
  s390/delay: remove udelay_simple()
  s390/irq: select HAVE_IRQ_EXIT_ON_IRQ_STACK
  s390/delay: simplify udelay
  s390/test_unwind: use timer instead of udelay
  s390/test_unwind: fix CALL_ON_STACK tests
  s390: make calls to TRACE_IRQS_OFF/TRACE_IRQS_ON balanced
  s390: always clear kernel stack backchain before calling functions

Pull more arm64 updates from Catalin Marinas:
 "These are some some trivial updates that mostly fix/clean-up code
  pushed during the merging window:

   - Work around broken GCC 4.9 handling of "S" asm constraint

   - Suppress W=1 missing prototype warnings

   - Warn the user when a small VA_BITS value cannot map the available
     memory

   - Drop the useless update to per-cpu cycles"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Work around broken GCC 4.9 handling of "S" constraint
  arm64: Warn the user when a small VA_BITS value wastes memory
  arm64: entry: suppress W=1 prototype warnings
  arm64: topology: Drop the useless update to per-cpu cycles

Pull RISC-V updates from Palmer Dabbelt:
 "We have a handful of new kernel features for 5.11:

   - Support for the contiguous memory allocator.

   - Support for IRQ Time Accounting

   - Support for stack tracing

   - Support for strict /dev/mem

   - Support for kernel section protection

  I'm being a bit conservative on the cutoff for this round due to the
  timing, so this is all the new development I'm going to take for this
  cycle (even if some of it probably normally would have been OK). There
  are, however, some fixes on the list that I will likely be sending
  along either later this week or early next week.

  There is one issue in here: one of my test configurations
  (PREEMPT{,_DEBUG}=y) fails to boot on QEMU 5.0.0 (from April) as of
  the .text.init alignment patch.

  With any luck we'll sort out the issue, but given how many bugs get
  fixed all over the place and how unrelated those features seem my
  guess is that we're just running into something that's been lurking
  for a while and has already been fixed in the newer QEMU (though I
  wouldn't be surprised if it's one of these implicit assumptions we
  have in the boot flow). If it was hardware I'd be strongly inclined to
  look more closely, but given that users can upgrade their simulators
  I'm less worried about it"

* tag 'riscv-for-linus-5.11-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  arm64: Use the generic devmem_is_allowed()
  arm: Use the generic devmem_is_allowed()
  RISC-V: Use the new generic devmem_is_allowed()
  lib: Add a generic version of devmem_is_allowed()
  riscv: Fixed kernel test robot warning
  riscv: kernel: Drop unused clean rule
  riscv: provide memmove implementation
  RISC-V: Move dynamic relocation section under __init
  RISC-V: Protect all kernel sections including init early
  RISC-V: Align the .init.text section
  RISC-V: Initialize SBI early
  riscv: Enable ARCH_STACKWALK
  riscv: Make stack walk callback consistent with generic code
  riscv: Cleanup stacktrace
  riscv: Add HAVE_IRQ_TIME_ACCOUNTING
  riscv: Enable CMA support
  riscv: Ignore Image.* and loader.bin
  riscv: Clean up boot dir
  riscv: Fix compressed Image formats build
  RISC-V: Add kernel image sections to the resource tree

Merge tag 'drm-intel-next-fixes-2020-12-18' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

drm/i915 fixes for the merge window
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87zh2bp34m.fsf@intel.com

That seems to be unused.

Daniel: Mike reported a warning when booting with qxl, which this
patch fixes:

[    1.815561] WARNING: CPU: 7 PID: 355 at drivers/gpu/drm/ttm/ttm_pool.c:365 ttm_pool_alloc+0x41b/0x540 [ttm]
Signed-off-by: Christian König <christian.koenig@amd.com>
Reported-by: Mike Galbraith <efault@gmx.de>
Tested-by: Mike Galbraith <efault@gmx.de>
References: https://lore.kernel.org/lkml/7cb43d5b-4e6a-defc-1ab6-5f713ad5a963@amd.com/Reviewed-by: David Airlie <airlied@redhat.com>
[davnet: bring commit message up to par.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201218134243.110884-1-christian.koenig@amd.com

As per the radeon/amdgpu fix don't use multihop if hw moves
aren't enabled.
Reported-by: Mike Galbraith <efault@gmx.de>
Tested-by: Mike Galbraith <efault@gmx.de>
Fixes: 0c8c0659 ("drm/nouveau/ttm: use multihop")
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201217200943.30511-1-airlied@gmail.com

Fix TGL REVID macros to fetch correct display/gt stepping based
on SOC rev id from INTEL_REVID() macro. Previously, we were just
returning the first element of the revid array instead of using
the correct index based on SOC rev id.

Fixes: c33298cb ("drm/i915/tgl: Fix stepping WA matching")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201203072359.156682-1-aditya.swarup@intel.com
(cherry picked from commit 83dbd74f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

When inserting a VMA, we restrict the placement to the low 4G unless the
caller opts into using the full range. This was done to allow usersapce
the opportunity to transition slowly from a 32b address space, and to
avoid breaking inherent 32b assumptions of some commands.

However, for insert we limited ourselves to 4G-4K, but on verification
we allowed the full 4G. This causes some attempts to bind a new buffer
to sporadically fail with -ENOSPC, but at other times be bound
successfully.

commit 48ea1e32 ("drm/i915/gen9: Set PIN_ZONE_4G end to 4GB - 1
page") suggests that there is a genuine problem with stateless addressing
that cannot utilize the last page in 4G and so we purposefully excluded
it. This means that the quick pin pass may cause us to utilize a buggy
placement.
Reported-by: CQ Tang <cq.tang@intel.com>
Testcase: igt/gem_exec_params/larger-than-life-batch
Fixes: 48ea1e32 ("drm/i915/gen9: Set PIN_ZONE_4G end to 4GB - 1 page")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: CQ Tang <cq.tang@intel.com>
Reviewed-by: CQ Tang <cq.tang@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v4.5+
Link: https://patchwork.freedesktop.org/patch/msgid/20201216092951.7124-1-chris@chris-wilson.co.uk
(cherry picked from commit 5f22cc0b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

CI shows this workaround is also needed on Gen11.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 059a0beb ("drm/i915/perf: workaround register corruption in OATAILPTR")
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201126105155.540350-1-lionel.g.landwerlin@intel.com
(cherry picked from commit fa5d598b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

We now use ilk_hpd_irq_setup for all GMCH platforms that do not have
hotplug. These are early gen3 and gen2 devices that now explode on boot
as they try to access non-existent registers.

Fixes: 794d61a1 ("drm/i915: re-order if/else ladder for hpd_irq_setup")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201127145748.29491-1-chris@chris-wilson.co.uk
(cherry picked from commit e5346a1f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Pull GPIO updates from Linus Walleij:
 "This is the bulk of the GPIO changes for the v5.11 kernel cycle:

  Core changes:

   - Retired the old set-up function for GPIO IRQ chips. All chips now
     use the template struct gpio_irq_chip and pass that to the core to
     be set up alongside the gpio_chip. We can finally get rid of the
     old cruft.

   - Some refactoring and clean up of the core code.

   - Support edge event timestamps to be stamped using REALTIME (wall
     clock) timestamps. We have found solid use cases for this, so we
     support it.

  New drivers:

   - MStar MSC313 GPIO driver.

   - HiSilicon GPIO driver.

  Driver improvements:

   - The PCA953x driver now also supports the NXP PCAL9554B/C chips.

   - The mockup driver can now be probed from the device tree which is
     pretty useful for virtual prototyping of devices.

   - The Rcar driver now supports .get_multiple()

   - The MXC driver dropped some legacy and became a pure device tree
     client.

   - The Exar driver was moved over to the IDA interface for
     enumerating, and also switched over to using regmap for register
     access"

* tag 'gpio-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (87 commits)
  MAINTAINERS: Remove reference to non-existing file
  gpio: hisi: Do not require ACPI for COMPILE_TEST
  MAINTAINERS: Add maintainer for HiSilicon GPIO driver
  gpio: gpio-hisi: Add HiSilicon GPIO support
  gpio: cs5535: Simplify the return expression of cs5535_gpio_probe()
  gpiolib: irq hooks: fix recursion in gpiochip_irq_unmask
  dt-bindings: mt7621-gpio: convert bindings to YAML format
  gpiolib: cdev: Flag invalid GPIOs as used
  gpio: put virtual gpio device into their own submenu
  drivers: gpio: amd8111: use SPDX-License-Identifier
  drivers: gpio: amd8111: prefer dev_err()/dev_info() over raw printk
  drivers: gpio: bt8xx: prefer dev_err()/dev_warn() over of raw printk
  gpio: Add TODO item for debugfs interface
  gpio: just plain warning when nonexisting gpio requested
  tools: gpio: add option to report wall-clock time to gpio-event-mon
  tools: gpio: add support for reporting realtime event clock to lsgpio
  gpiolib: cdev: allow edge event timestamps to be configured as REALTIME
  gpio: msc313: MStar MSC313 GPIO driver
  dt-bindings: gpio: Binding for MStar MSC313 GPIO controller
  dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver
  ...

Pull UML updates from Richard Weinberger:

 - IRQ handling cleanups

 - Support for suspend

 - Various fixes for UML specific drivers: ubd, vector, xterm

* tag 'for-linus-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: (32 commits)
  um: Fix build w/o CONFIG_PM_SLEEP
  um: time-travel: Correct time event IRQ delivery
  um: irq/sigio: Support suspend/resume handling of workaround IRQs
  um: time-travel: Actually apply "free-until" optimisation
  um: chan_xterm: Fix fd leak
  um: tty: Fix handling of close in tty lines
  um: Monitor error events in IRQ controller
  um: allocate a guard page to helper threads
  um: support some of ARCH_HAS_SET_MEMORY
  um: time-travel: avoid multiple identical propagations
  um: Fetch registers only for signals which need them
  um: Support suspend to RAM
  um: Allow PM with suspend-to-idle
  um: time: Fix read_persistent_clock64() in time-travel
  um: Simplify os_idle_sleep() and sleep longer
  um: Simplify IRQ handling code
  um: Remove IRQ_NONE type
  um: irq: Reduce irq_reg allocation
  um: irq: Clean up and rename struct irq_fd
  um: Clean up alarm IRQ chip name
  ...

Pull jffs2, ubi and ubifs updates from Richard Weinberger:
 "JFFS2:
   - Fix for a remount regression
   - Fix for an abnormal GC exit
   - Fix for a possible NULL pointer issue while mounting

  UBI:
   - Add support ECC-ed NOR flash
   - Removal of dead code

  UBIFS:
   - Make node dumping debug code more reliable
   - Various cleanups: less ifdefs, less typos
   - Fix for an info leak"

* tag 'for-linus-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  ubifs: ubifs_dump_node: Dump all branches of the index node
  ubifs: ubifs_dump_sleb: Remove unused function
  ubifs: Pass node length in all node dumping callers
  Revert "ubifs: Fix out-of-bounds memory access caused by abnormal value of node_len"
  ubifs: Limit dumping length by size of memory which is allocated for the node
  ubifs: Remove the redundant return in dbg_check_nondata_nodes_order
  jffs2: Fix NULL pointer dereference in rp_size fs option parsing
  ubifs: Fixed print foramt mismatch in ubifs
  ubi: Do not zero out EC and VID on ECC-ed NOR flashes
  jffs2: remove trailing semicolon in macro definition
  ubifs: Fix error return code in ubifs_init_authentication()
  ubifs: wbuf: Don't leak kernel memory to flash
  ubi: Remove useless code in bytes_str_to_int
  ubifs: Fix the printing type of c->big_lpt
  jffs2: Allow setting rp_size to zero during remounting
  jffs2: Fix ignoring mounting options problem during remounting
  jffs2: Fix GC exit abnormally
  ubifs: Code cleanup by removing ifdef macro surrounding
  jffs2: Fix if/else empty body warnings
  ubifs: Delete duplicated words + other fixes

Pull cifs updates from Steve French:
 "The largest part are for support of the newer mount API which has been
  needed for cifs/smb3 mounts for a long time due to the new API's
  better handling of remount, and better error reporting. There are
  three additional small cleanup patches for this being tested, that are
  not included yet.

  This series also includes addition of support for the SMB3 witness
  protocol which can provide important notifications from the server to
  client on server address or export or network changes. This can be
  useful for example in order to be notified before the failure - when a
  server's IP address changes (in the future it will allow us to support
  server notifications of when a share is moved).

  It also includes three patches for stable e.g. some that better handle
  some confusing error messages during session establishment"

* tag '5.11-rc-smb3' of git://git.samba.org/sfrench/cifs-2.6: (55 commits)
  cifs: update internal module version number
  cifs: Fix support for remount when not changing rsize/wsize
  cifs: handle "guest" mount parameter
  cifs: correct four aliased mount parms to allow use of previous names
  cifs: Tracepoints and logs for tracing credit changes.
  cifs: fix use after free in cifs_smb3_do_mount()
  cifs: fix rsize/wsize to be negotiated values
  cifs: Fix some error pointers handling detected by static checker
  smb3: remind users that witness protocol is experimental
  cifs: update super_operations to show_devname
  cifs: fix uninitialized variable in smb3_fs_context_parse_param
  cifs: update mnt_cifs_flags during reconfigure
  cifs: move update of flags into a separate function
  cifs: remove ctx argument from cifs_setup_cifs_sb
  cifs: do not allow changing posix_paths during remount
  cifs: uncomplicate printing the iocharset parameter
  cifs: don't create a temp nls in cifs_setup_ipc
  cifs: simplify handling of cifs_sb/ctx->local_nls
  cifs: we do not allow changing username/password/unc/... during remount
  cifs: add initial reconfigure support
  ...