- 23 Feb, 2017 40 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC 64-bit updates from Arnd Bergmann: "Changes to platform code for 64-bit ARM platforms, only trivial stuff this time, a few defconfig changes to enable drivers, and a new entry for the Cavium ThunderX2 platform" * tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: MAINTAINERS: Add Cavium ThunderX2 entry arm64: add ARCH_THUNDER2 to defconfig arm64: add THUNDER2 processor family MAINTAINERS: Extend ARM/Mediatek SoC support section arm64: defconfig: enable CONFIG_MMC_SDHCI_CADENCE arm64: defconfig: enable XORv2 for Marvell Armada 7K/8K
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC platform updates from Arnd Bergmann: "In the SoC branch we normally collect classic arch/arm/mach-* contents, i.e. C code changes for SoC platforms. This release cycle the diffstat is quite nice, in that we're removing 3x the amount of code that's being added. The main reason for this is that there's a removal of camera drivers for Freescale i.MX chips (driver was removed so the device registration isn't needed any more). There's also removal of display initialization code for OMAP that is no longer needed. The rest are mostly minor tweaks and cleanups; constification on Samsung platforms, cleanup of ux500 platform data, purge of other unused platform data/device seutp on i.MX and other good stuff. New SoC support this cycle is for two Allwinner platforms, H2+ and V3s" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (55 commits) ARM: ux500: remove deleted file from Makefile ARM: ep93xx: Disable TS-72xx watchdog before uncompressing ARM: ux500: cut some platform data MAINTAINERS: Update for the current location of the bcm2835 tree. ARM: davinci: remove BUG_ON() from da850_register_sata() ARM: davinci: da850: model the SATA refclk ARM: davinci: da850: add con_id for the SATA clock ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for SATA arm: mvebu: support for SMP on 98DX3336 SoC dt-bindings: video: exynos7-decon: Remove obsolete samsung,power-domain property soc: dove: constify reset_control_ops structures ARM: mv78xx0: fix possible PCI buffer overflow MAINTAINERS: transfer maintainership for the EZX platform ARM: shmobile: rcar-gen2: Add more register documentation ARM: tegra: paz00: Fix __initdata placement ARM: OMAP: clock: Remove unused mpurate cmdline option ARM: davinci: add skeleton for pdata-quirks arm: sunxi: add support for V3s SoC ARM: OMAP2+: omap_hwmod: Add support for earlycon arm: hisi: drop extern hip01_cpu_die ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC non-urgent fixes from Arnd Bergmann: "We sometimes collect non-critical fixes that come in during the later part of the merge window in a branch for the next release instead, and this is that contents for v4.11. Most of these are OMAP fixes, dealing with OMAP36/37 detection, quirks and setup. There's also some fixes for Davinci and a Kconfig fix for SCPI to only enable on ARM{,64}" * tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: firmware: arm_scpi: Add hardware dependencies ARM: OMAP3: Fix SoC detection of OMAP36/37 Family ARM: OMAP5: Add HWMOD_SWSUP_SIDLE_ACT flag for UART ARM: dts: Fix compatible for ti81xx uarts for 8250 ARM: dts: Fix am335x and dm814x scm syscon to probe children ARM: OMAP2+: Fix init for multiple quirks for the same SoC ARM: dts: Fix omap3 off mode pull defines bus: da850-mstpri: fix my e-mail address ARM: davinci: da850: fix da850_set_pll0rate() ARM: davinci: da850: coding style fix
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI updates from Bjorn Helgaas: - add ASPM L1 substate support - enable PCIe Extended Tags when supported - configure PCIe MPS settings on iProc, Versatile, X-Gene, and Xilinx - increase VPD access timeout - add ACS quirks for Intel Union Point, Qualcomm QDF2400 and QDF2432 - use new pci_irq_alloc_vectors() in more drivers - fix MSI affinity memory leak - remove unused MSI interfaces and update documentation - remove unused AER .link_reset() callback - avoid pci_lock / p->pi_lock deadlock seen with perf - serialize sysfs enable/disable num_vfs operations - move DesignWare IP from drivers/pci/host/ to drivers/pci/dwc/ and refactor so we can support both hosts and endpoints - add DT ECAM-like support for HiSilicon Hip06/Hip07 controllers - add Rockchip system power management support - add Thunder-X cn81xx and cn83xx support - add Exynos 5440 PCIe PHY support * tag 'pci-v4.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (93 commits) PCI: dwc: Remove dependency of designware on CONFIG_PCI PCI: dwc: Add CONFIG_PCIE_DW_HOST to enable PCI dwc host PCI: dwc: Split pcie-designware.c into host and core files PCI: dwc: designware: Fix style errors in pcie-designware.c PCI: dwc: designware: Parse "num-lanes" property in dw_pcie_setup_rc() PCI: dwc: all: Split struct pcie_port into host-only and core structures PCI: dwc: designware: Get device pointer at the start of dw_pcie_host_init() PCI: dwc: all: Rename cfg_read/cfg_write to read/write PCI: dwc: all: Use platform_set_drvdata() to save private data PCI: dwc: designware: Move register defines to designware header file PCI: dwc: Use PTR_ERR_OR_ZERO to simplify code PCI: dra7xx: Group PHY API invocations PCI: dra7xx: Enable MSI and legacy interrupts simultaneously PCI: dra7xx: Add support to force RC to work in GEN1 mode PCI: dra7xx: Simplify probe code with devm_gpiod_get_optional() PCI: Move DesignWare IP support to new drivers/pci/dwc/ directory PCI: exynos: Support the PHY generic framework Documentation: binding: Modify the exynos5440 PCIe binding phy: phy-exynos-pcie: Add support for Exynos PCIe PHY Documentation: samsung-phy: Add exynos-pcie-phy binding ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Some 'const'ing in qlogic networking drivers, from Bhumika Goyal. 2) Fix scheduling while atomic in l2tp network namespace exit by deferring the work to the workqueue. From Ridge Kennedy. 3) Fix use after free in dccp timewait handling, from Andrey Ryabinin. 4) mlx5e CQE compression engine not initialized properly, from Tariq Toukan. 5) Some UAPI header fixes from Dmitry V. Levin. 6) Don't overwrite module parameter value in mlx4 driver, from Majd Dibbiny. 7) Fix divide by zero in xt_hashlimit netfilter module, from Alban Browaeys. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (35 commits) bpf: Fix bpf_xdp_event_output net/mlx4_en: Use __skb_fill_page_desc() net/mlx4_core: Use cq quota in SRIOV when creating completion EQs net/mlx4_core: Fix VF overwrite of module param which disables DMFS on new probed PFs net/mlx4: Spoofcheck and zero MAC can't coexist net/mlx4: Change ENOTSUPP to EOPNOTSUPP uapi: fix linux/rds.h userspace compilation errors uapi: fix linux/seg6.h and linux/seg6_iptunnel.h userspace compilation errors lib: Remove string from parman config selection forcedeth: Remove return from a void function bpf: fix spelling mistake: "proccessed" -> "processed" uapi: fix linux/llc.h userspace compilation error uapi: fix linux/ip6_tunnel.h userspace compilation errors net/mlx5e: Fix wrong CQE decompression net/mlx5e: Update MPWQE stride size when modifying CQE compress state net/mlx5e: Fix broken CQE compression initialization net/mlx5e: Do not reduce LRO WQE size when not using build_skb net/mlx5e: Register/unregister vport representors on interface attach/detach net/mlx5e: s390 system compilation fix tcp: account for ts offset only if tsecr not zero ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdmaLinus Torvalds authored
Pull Mellanox rdma updates from Doug Ledford: "Mellanox specific updates for 4.11 merge window Because the Mellanox code required being based on a net-next tree, I keept it separate from the remainder of the RDMA stack submission that is based on 4.10-rc3. This branch contains: - Various mlx4 and mlx5 fixes and minor changes - Support for adding a tag match rule to flow specs - Support for cvlan offload operation for raw ethernet QPs - A change to the core IB code to recognize raw eth capabilities and enumerate them (touches non-Mellanox code) - Implicit On-Demand Paging memory registration support" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (40 commits) IB/mlx5: Fix configuration of port capabilities IB/mlx4: Take source GID by index from HW GID table IB/mlx5: Fix blue flame buffer size calculation IB/mlx4: Remove unused variable from function declaration IB: Query ports via the core instead of direct into the driver IB: Add protocol for USNIC IB/mlx4: Support raw packet protocol IB/mlx5: Support raw packet protocol IB/core: Add raw packet protocol IB/mlx5: Add implicit MR support IB/mlx5: Expose MR cache for mlx5_ib IB/mlx5: Add null_mkey access IB/umem: Indicate that process is being terminated IB/umem: Update on demand page (ODP) support IB/core: Add implicit MR flag IB/mlx5: Support creation of a WQ with scatter FCS offload IB/mlx5: Enable QP creation with cvlan offload IB/mlx5: Enable WQ creation and modification with cvlan offload IB/mlx5: Expose vlan offloads capabilities IB/uverbs: Enable QP creation with cvlan offload ...
-
git://github.com/awilliam/linux-vfioLinus Torvalds authored
Pull VFIO updates from Alex Williamson: - Kconfig fixes for SPAPR_TCE_IOMMU=n (Michael Ellerman) - Module softdep rather than request_module to simplify usage from initrd (Alex Williamson) - Comment typo fix (Changbin Du) * tag 'vfio-v4.11-rc1' of git://github.com/awilliam/linux-vfio: vfio: fix a typo in comment of function vfio_pin_pages vfio: Replace module request with softdep vfio/mdev: Use a module softdep for vfio_mdev vfio: Fix build break when SPAPR_TCE_IOMMU=n
-
Martin KaFai Lau authored
Fix a typo. xdp->data instead of xdp should be copied to the perf-event's dst_buff. Fixes: 4de16969 ("bpf: enable event output helper also for xdp types") Reported-by:
Huapeng Zhou <hzhou@fb.com> Tested-by:
Feixiong Zhang <feixiong@fb.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto update from Herbert Xu: "API: - Try to catch hash output overrun in testmgr - Introduce walksize attribute for batched walking - Make crypto_xor() and crypto_inc() alignment agnostic Algorithms: - Add time-invariant AES algorithm - Add standalone CBCMAC algorithm Drivers: - Add NEON acclerated chacha20 on ARM/ARM64 - Expose AES-CTR as synchronous skcipher on ARM64 - Add scalar AES implementation on ARM64 - Improve scalar AES implementation on ARM - Improve NEON AES implementation on ARM/ARM64 - Merge CRC32 and PMULL instruction based drivers on ARM64 - Add NEON acclerated CBCMAC/CMAC/XCBC AES on ARM64 - Add IPsec AUTHENC implementation in atmel - Add Support for Octeon-tx CPT Engine - Add Broadcom SPU driver - Add MediaTek driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (142 commits) crypto: xts - Add ECB dependency crypto: cavium - switch to pci_alloc_irq_vectors crypto: cavium - switch to pci_alloc_irq_vectors crypto: cavium - remove dead MSI-X related define crypto: brcm - Avoid double free in ahash_finup() crypto: cavium - fix Kconfig dependencies crypto: cavium - cpt_bind_vq_to_grp could return an error code crypto: doc - fix typo hwrng: omap - update Kconfig help description crypto: ccm - drop unnecessary minimum 32-bit alignment crypto: ccm - honour alignmask of subordinate MAC cipher crypto: caam - fix state buffer DMA (un)mapping crypto: caam - abstract ahash request double buffering crypto: caam - fix error path for ctx_dma mapping failure crypto: caam - fix DMA API leaks for multiple setkey() calls crypto: caam - don't dma_map key for hash algorithms crypto: caam - use dma_map_sg() return code crypto: caam - replace sg_count() with sg_nents_for_len() crypto: caam - check sg_count() return value crypto: caam - fix HW S/G in ablkcipher_giv_edesc_alloc() ..
-
git://github.com/andersson/remoteprocLinus Torvalds authored
Pull rpmsg updates from Bjorn Andersson: "This introduces an interface for user space to directly communicate on rpmsg endpoints without the implementation of specific kernel drivers, which is useful for e.g. debug channels: * tag 'rpmsg-v4.11' of git://github.com/andersson/remoteproc: rpmsg: rpmsg_create_ept() returns NULL on error rpmsg: qcom: smd: Return positively when not enabled rpmsg: unlock on error in rpmsg_eptdev_read() rpmsg: char: add CONFIG_NET dependency rpmsg: smd: Register rpmsg user space interface for edges rpmsg: Driver for user space endpoint interface rpmsg: qcom_smd: Implement endpoint "poll" rpmsg: Introduce "poll" to endpoint ops rpmsg: qcom_smd: Add support for "label" property
-
git://github.com/andersson/remoteprocLinus Torvalds authored
Pull remoteproc updates from Bjorn Andersson: "This introduces support for booting the dedicated sensor core in the Qualcomm MSM8996, updates the Qualcomm ADSP and Hexagon drivers to utilize SMD subdevice helpers for properly handle shutdowns and restarts of the remoteproc, add virtio support to the ST remoteproc and refactor the Qualcomm Hexagon driver to handle variations between platforms. The support code for parsing, loading and authenticating Qualcomm firmware files (MDT) is refactored and move to drivers/soc/qcom, to allow for non-remoteproc drivers to utilize this. Finally it brings some cleanups to the remoteproc core" * tag 'rproc-v4.11' of git://github.com/andersson/remoteproc: (27 commits) remoteproc: qcom: mdt_loader: Use signed type for offset remoteproc: st: add virtio communication support remoteproc: st: correct probe error management remoteproc: Modify the function names remoteproc: Reduce asynchronous request_firmware to auto-boot only remoteproc: Drop qcom_scm_pas_supported() from adsp_probe() MAINTAINERS: Add missing rpmsg include path remoteproc: qcom: Use common SMD edge handler remoteproc: qcom: wcnss: Make SMD handling common remoteproc: Move qcom_mdt_loader into drivers/soc/qcom remoteproc: qcom: mdt_loader: Refactor MDT loader remoteproc: qcom: mdt_loader: Don't overwrite firmware object remoteproc: qcom: Extract non-mdt related helper remoteproc: qcom: q6v5: Decouple driver from MDT loader remoteproc: qcom: q6v5: Remove mss supply from 8916 remoteproc: qcom: fix initializers for qcom_mss_reg_res array remoteproc: Drop firmware_loading_complete remoteproc: Add RPROC_DELETED state remoteproc: Move rproc_delete_debug_dir() to rproc_del() remoteproc: qcom: Add SLPI rproc support to load and boot slpi proc. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2Linus Torvalds authored
Pull GFS2 fix from Bob Peterson: "This is an addendum for the 4.11 merge window. Andy Price wrote this patch to close a nasty race condition that allows access to glocks that are being destroyed. Without this patch, GFS2 is vulnerable to random corruption and kernel panic" * tag 'gfs2-4.11.addendum' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Add missing rcu locking for glock lookup
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound updates from Takashi Iwai: "Here is the update of sound bits for 4.11: again at this time, no big changes in ALSA and ASoC core but only cosmetic changes like consitifaction. Meanwhile, quite a lot of developments are seen in a few driver side. ALSA Core: - Clean up, consitification of some ops HD-audio: - A slight behavior change of single_cmd option - Quirks for AmigaOne X1000, Samsung Ativ Book 8, Dell AiO, ALC221 HP, and fixes for Lewisburg controller - Realtek ALC299, ALC1220 codecs Others: - USB-audio: Tascam US-16x08 DSP mixer quirk - Intel HDMI LPE audio support for Baytrail / Cherrytrail; this contains some updates in drm/i915 for the new platform binding ASoC: - Lots of updates in Intel drivers, mostly for DisplayPort and HDMI on Skylake and onwards, as well as more Baytrail / Cherrytrail boards support - Channel mapping support for HDMI - Support for AllWinner A31 and A33, Everest Semiconductor ES8328, Nuvoton NAU8540. * tag 'sound-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (323 commits) ALSA: usb-audio: Tidy up mixer_us16x08.c ALSA: usb-audio: Fix memory leak and corruption in mixer_us16x08.c ALSA: usb-audio: purge needless variable length array ALSA: x86: hdmi: select CONFIG_SND_PCM ALSA: x86: Don't enable runtime PM as default ALSA: x86: Use runtime PM autosuspend ALSA: usb-audio: localize function without external linkage ALSA: usb-audio: localize one-referrer variable ALSA: usb-audio: Tascam US-16x08 DSP mixer quirk ALSA: emu10k1: constify snd_emux_operators structure ASoC: sun4i-spdif: drop unnessary snd_soc_unregister_component() ASoC: Intel: bxt: Add jack port initialize in bxt_rt298 machine ASoC: nau8825: automatic BCLK and LRC divde in master mode ASoC: hdac_hdmi: Add device id for Geminilake ASoC: Intel: Skylake: Add Geminlake IDs ASoC: rt298: Add DMI match for Geminilake reference platform ASoC: Intel: Skylake: Check device type to get endpoint configuration ASoC: Intel: bxt: Add jack port initialize in da7219_max98357a machine ASoC: Intel: Skylake: Add jack port initialize in nau88l25_ssm4567 machine ASoC: Intel: Skylake: Add jack port initialize in nau88l25_max98357a machine ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.11 cycle Core changes: - Augment fwnode_get_named_gpiod() to configure the GPIO pin immediately after requesting it like all other APIs do. This is a treewide change also updating all users. - Pass a GPIO label down to gpiod_request() from fwnode_get_named_gpiod(). This makes debugfs and the userspace ABI correctly reflect the current in-kernel consumer of a pin taken using this abstraction. This is a treewide change also updating all users. - Rename devm_get_gpiod_from_child() to devm_fwnode_get_gpiod_from_child() to reflect the fact that this function is operating on a fwnode object. This is a treewide change also updating all users. - Make it possible to take multiple GPIOs in a single hog of device tree hogs. - The refactorings switching GPIO chips to use the .set_config() callback using standard pin control properties and providing a backend into the pin control subsystem that were also merged into the pin control tree naturally appear here too. Testing instrumentation: - A whole slew of cleanups and improvements to the mockup GPIO driver. We now have an extended userspace test exercising the subsystem, and we can inject interrupts etc from userspace to fully test the core GPIO functionality. New drivers: - New driver for the Cortina Systems Gemini GPIO controller. - New driver for the Exar XR17V352/354/358 chips. - New driver for the ACCES PCI-IDIO-16 PCI GPIO card. Driver changes: - RCAR: set the irqchip parent device, add fine-grained runtime PM support. - pca953x: support optional RESET control line on the chip. - DaVinci: cleanups and simplifications. Add support for multiple instances. - .set_multiple() and naming of lines on more or less all of the ISA/PCI GPIO controllers. - mcp23s08: refactored to use regmap as a first step to further rewrites and modernizations" * tag 'gpio-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (61 commits) gpio: reintroduce devm_get_gpiod_from_child() gpio: pci-idio-16: Fix PCI BAR index gpio: pci-idio-16: Fix PCI device ID code gpio: mockup: implement event injecting over debugfs gpio: mockup: add a dummy irqchip gpio: mockup: implement naming the lines gpio: mockup: code shrink gpio: mockup: readability tweaks gpio: Add GPIO support for the ACCES PCI-IDIO-16 gpio: Add the devm_fwnode_get_index_gpiod_from_child() helper gpio: Rename devm_get_gpiod_from_child() gpio: mcp23s08: Select REGMAP/REGMAP_I2C to fix build error gpio: ws16c48: Add support for GPIO names gpio: gpio-mm: Add support for GPIO names gpio: 104-idio-16: Add support for GPIO names gpio: 104-idi-48: Add support for GPIO names gpio: 104-dio-48e: Add support for GPIO names gpio: ws16c48: Remove unnecessary driver_data set gpio: gpio-mm: Remove unnecessary driver_data set gpio: 104-idio-16: Remove unnecessary driver_data set ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input updates from Dmitry: - a new driver for Zeitech touchscreen controller - a new driver for Samsung "touchkeys" - touchscreen driver for Moorestown platform has been removed because platform support is gone - MPU3050 accelerometer driver was removed in favor of IIO driver - miscellaneous driver cleanup and fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (88 commits) Input: zet6223 - export OF device ID as module aliases Input: tsc2004/5 - switch to using generic device properties Input: tsc2004/5 - fix regulator handling Input: tsc2005 - add OF device table Input: add driver for Zeitec ZET6223 Input: joydev - do not report stale values on first open Input: synaptics-rmi4 - forward upper mechanical buttons to PS/2 guest Input: synaptics-rmi4 - clean up F30 implementation Input: synaptics - use SERIO_OOB_DATA to handle trackstick buttons Input: psmouse - add a custom serio protocol to send extra information Input: synaptics-rmi4 - fix error return code in rmi_probe_interrupts() Input: xpad - restore LED state after device resume Input: synaptics-rmi4 - add rmi_find_function() Input: xpad - fix stuck mode button on Xbox One S pad Input: joydev - use clamp() macro Input: refuse to register absolute devices without absinfo Input: synaptics-rmi4 - add sysfs interfaces for hardware IDs Input: synaptics-rmi4 - add sysfs attribute update_fw_status Input: mousedev - stop offering PS/2 to userspace by default Input: tca8418 - switch to using generic device properties ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdmaLinus Torvalds authored
Pull rdma updates from Doug Ledford: "First set of updates for 4.11 kernel merge window - Add new Broadcom bnxt_re RoCE driver - rxe driver updates - ioctl cleanups - ETH_P_IBOE declaration cleanup - IPoIB changes - Add port state cache - Allow srpt driver to accept guids as port names in config - Update to hfi1 driver - Update to srp driver - Lots of misc minor changes all over" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (114 commits) RDMA/bnxt_re: fix for "bnxt_en: Update to firmware interface spec 1.7.0." rdma_cm: fail iwarp accepts w/o connection params IB/srp: Drain the send queue before destroying a QP IB/core: Add support for draining IB_POLL_DIRECT completion queues IB/srp: Improve an error path IB/srp: Make a diagnostic message more informative IB/srp: Document locking conventions IB/srp: Fix race conditions related to task management IB/srp: Avoid that duplicate responses trigger a kernel bug IB/SRP: Avoid using IB_MR_TYPE_SG_GAPS RDMA/qedr: Fix some error handling RDMA/bnxt_re: add DCB dependency IB/hns: include linux/module.h IB/vmw_pvrdma: Expose vendor error to ULPs vmw_pvrdma: switch to pci_alloc_irq_vectors IB/hfi1: use size_t for passing array length IB/ipoib: Remove redudant label IB/ipoib: remove the unnecessary memory free IB/mthca: switch to pci_alloc_irq_vectors IB/hfi1: Code reuse with memdup_copy ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlightLinus Torvalds authored
Pull backlight updates from Lee Jones: "Core Frameworks: - Add Daniel Thompson as co-maintainer Fix-ups: - Improve error handling; adp5520_bl - Split initial power checks into dedicated function; pwm_bl - Check current PWM status; pwm_bl Bug Fixes: - Fix potential race; lcd - Fix module auto-loading; da9052" * tag 'backlight-for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: MAINTAINERS: Rework entry for Backlight backlight: da9052: Fix module autoload backlight: pwm_bl: Check the PWM state for initial backlight power state backlight: pwm_bl: Move the checks for initial power state to a separate function backlight: adp5520: Fix error handling in adp5520_bl_probe() backlight: lcd: Fix race condition during register
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds authored
Pull MFD updates from Lee Jones: "Core Frameworks: - Add new !TOUCHSCREEN_SUN4I dependency for SUN4I_GPADC - List include/dt-bindings/mfd/* to files supported in MAINTAINERS New Drivers: - Intel Apollo Lake SPI NOR - ST STM32 Timers (Advanced, Basic and PWM) - Motorola 6556002 CPCAP (PMIC) New Device Support: - Add support for AXP221 to axp20x - Add support for Intel Gemini Lake to intel-lpss-pci - Add support for MT6323 LED to mt6397-core - Add support for COMe-bBD#, COMe-bSL6, COMe-bKL6, COMe-cAL6 and COMe-cKL6 to kempld-core New Functionality: - Add support for Analog CODAC to sun6i-prcm - Add support for Watchdog to lpc_ich Fix-ups: - Error handling improvements; axp288_charger, axp20x, ab8500-sysctrl - Adapt platform data handling; axp20x - IRQ handling improvements; arizona, axp20x - Remove superfluous code; arizona, axp20x, lpc_ich - Trivial coding style/spelling fixes; axp20x, abx500, mfd.txt - Regmap fix-ups; axp20x - DT changes; mfd.txt, aspeed-lpc, aspeed-gfx, ab8500-core, tps65912, mt6397 - Use new I2C probing mechanism; max77686 - Constification; rk808 Bug Fixes: - Stop data transfer whilst suspended; cros_ec" * tag 'mfd-for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (43 commits) mfd: lpc_ich: Enable watchdog on Intel Apollo Lake PCH mfd: lpc_ich: Remove useless comments in core part mfd: Add support for several boards to Kontron PLD driver mfd: constify regmap_irq_chip structures MAINTAINERS: Add include/dt-bindings/mfd to MFD entry mfd: cpcap: Add minimal support mfd: mt6397: Add MT6323 LED support into MT6397 driver Documentation: devicetree: Add LED subnode binding for MT6323 PMIC mfd: tps65912: Export OF device ID table as module aliases mfd: ab8500-core: Rename clock device and compatible mfd: cros_ec: Send correct suspend/resume event to EC mfd: max77686: Remove I2C device ID table mfd: max77686: Use the struct i2c_driver .probe_new instead of .probe mfd: max77686: Use of_device_get_match_data() helper mfd: max77686: Don't attempt to get i2c_device_id .data mfd: ab8500-sysctrl: Handle probe deferral mfd: intel-lpss: Add Intel Gemini Lake PCI IDs mfd: axp20x: Fix AXP806 access errors on cold boot mfd: cros_ec: Send suspend state notification to EC mfd: cros_ec: Prevent data transfer while device is suspended ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for your net tree, they are: 1) Revisit warning logic when not applying default helper assignment. Jiri Kosina considers we are breaking existing setups and not warning our users accordinly now that automatic helper assignment has been turned off by default. So let's make him happy by spotting the warning by when we find a helper but we cannot attach, instead of warning on the former deprecated behaviour. Patch from Jiri Kosina. 2) Two patches to fix regression in ctnetlink interfaces with nfnetlink_queue. Specifically, perform more relaxed in CTA_STATUS and do not bail out if CTA_HELP indicates the same helper that we already have. Patches from Kevin Cernekee. 3) A couple of bugfixes for ipset via Jozsef Kadlecsik. Due to wrong index logic in hash set types and null pointer exception in the list:set type. 4) hashlimit bails out with correct userspace parameters due to wrong arithmetics in the code that avoids "divide by zero" when transforming the userspace timing in milliseconds to token credits. Patch from Alban Browaeys. 5) Fix incorrect NFQA_VLAN_MAX definition, patch from Ken-ichirou MATSUZAWA. 6) Don't not declare nfnetlink batch error list as static, since this may be used by several subsystems at the same time. Patch from Liping Zhang. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Tariq Toukan says: ==================== mlx4 misc fixes This patchset contains misc bug fixes from Eric Dumazet and our team to the mlx4 Core and Eth drivers. Series generated against net commit: eee2faab tcp: account for ts offset only if tsecr not zero v3: * Rebased, conflict solved. v2: * Added Eric's fix (patch 5/5). ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Or we might miss the fact that a page was allocated from memory reserves. Fixes: dceeab0e ("mlx4: support __GFP_MEMALLOC for rx") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jack Morgenstein authored
When creating EQs to handle CQ completion events for the PF or for VFs, we create enough EQE entries to handle completions for the max number of CQs that can use that EQ. When SRIOV is activated, the max number of CQs a VF (or the PF) can obtain is its CQ quota (determined by the Hypervisor resource tracker). Therefore, when creating an EQ, the number of EQE entries that the VF should request for that EQ is the CQ quota value (and not the total number of CQs available in the FW). Under SRIOV, the PF, also must use its CQ quota, because the resource tracker also controls how many CQs the PF can obtain. Using the FW total CQs instead of the CQ quota when creating EQs resulted wasting MTT entries, due to allocating more EQEs than were needed. Fixes: 5a0d0a61 ("mlx4: Structures and init/teardown for VF resource quotas") Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Reported-by:
Dexuan Cui <decui@microsoft.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Majd Dibbiny authored
In the VF driver, module parameter mlx4_log_num_mgm_entry_size was mistakenly overwritten -- and in a manner which overrode the device-managed flow steering option encoded in the parameter. log_num_mgm_entry_size is a global module parameter which affects all ConnectX-3 PFs installed on that host. If a VF changes log_num_mgm_entry_size, this will affect all PFs which are probed subsequent to the change (by disabling DMFS for those PFs). Fixes: 3c439b55 ("mlx4_core: Allow choosing flow steering mode") Signed-off-by:
Majd Dibbiny <majd@mellanox.com> Reviewed-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eugenia Emantayev authored
Spoofcheck can't be enabled if VF MAC is zero. Vice versa, can't zero MAC if spoofcheck is on. Fixes: 8f7ba3ca ('net/mlx4: Add set VF mac address support') Signed-off-by:
Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Or Gerlitz authored
As ENOTSUPP is specific to NFS, change the return error value to EOPNOTSUPP in various places in the mlx4 driver. Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Suggested-by:
Yotam Gigi <yotamg@mellanox.com> Reviewed-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dmitry V. Levin authored
Consistently use types from linux/types.h to fix the following linux/rds.h userspace compilation errors: /usr/include/linux/rds.h:198:2: error: unknown type name 'u8' u8 rx_traces; /usr/include/linux/rds.h:199:2: error: unknown type name 'u8' u8 rx_trace_pos[RDS_MSG_RX_DGRAM_TRACE_MAX]; /usr/include/linux/rds.h:203:2: error: unknown type name 'u8' u8 rx_traces; /usr/include/linux/rds.h:204:2: error: unknown type name 'u8' u8 rx_trace_pos[RDS_MSG_RX_DGRAM_TRACE_MAX]; /usr/include/linux/rds.h:205:2: error: unknown type name 'u64' u64 rx_trace[RDS_MSG_RX_DGRAM_TRACE_MAX]; Fixes: 3289025a ("RDS: add receive message trace used by application") Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dmitry V. Levin authored
Include <linux/in6.h> in uapi/linux/seg6.h to fix the following linux/seg6.h userspace compilation error: /usr/include/linux/seg6.h:31:18: error: array type has incomplete element type 'struct in6_addr' struct in6_addr segments[0]; Include <linux/seg6.h> in uapi/linux/seg6_iptunnel.h to fix the following linux/seg6_iptunnel.h userspace compilation error: /usr/include/linux/seg6_iptunnel.h:26:21: error: array type has incomplete element type 'struct ipv6_sr_hdr' struct ipv6_sr_hdr srh[0]; Fixes: a50a05f4 ("ipv6: sr: add missing Kbuild export for header files") Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
As reported by Geert, remove the string so the user does not see this config option. The option is explicitly selected only as a dependency of in-kernel users. Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Fixes: 44091d29 ("lib: Introduce priority array area manager") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Tested-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Zhu Yanjun authored
In a void function, it is not necessary to append a return statement in it. Signed-off-by:
Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
trivial fix to spelling mistake in verbose log message Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dmitry V. Levin authored
Include <linux/if.h> to fix the following linux/llc.h userspace compilation error: /usr/include/linux/llc.h:26:27: error: 'IFHWADDRLEN' undeclared here (not in a function) unsigned char sllc_mac[IFHWADDRLEN]; Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dmitry V. Levin authored
Include <linux/if.h> and <linux/in6.h> to fix the following linux/ip6_tunnel.h userspace compilation errors: /usr/include/linux/ip6_tunnel.h:23:12: error: 'IFNAMSIZ' undeclared here (not in a function) char name[IFNAMSIZ]; /* name of tunnel device */ /usr/include/linux/ip6_tunnel.h:30:18: error: field 'laddr' has incomplete type struct in6_addr laddr; /* local tunnel end-point address */ Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Saeed Mahameed says: ==================== Mellanox mlx5e fixes for 4.11-rc1 This series includes some important bug fixes for mlx5e driver. Three misc fixes: From Mohamad, compilation fix on s390 system From Me, A fix for driver unload when switchdev mode is on. From Tariq, HW LRO frag size optimization for when build_skb is not used (striding RQ mode). Three CQE compression related fixes: Two fixes from Tariq and I, to correctly setup CQE compression parameters on driver load and on arbitrary user modifications. Last patch, fixes a very critical issue that was originally reported by Tom, where the driver reported csum errors or even page ref issues for when cqe compression is enabled and rapidly active. For your convenience this series was generated on top of net-next branch: 005c3490 ('Revert "ath10k: Search SMBIOS for OEM board file extension"') for -stable: net/mlx5e: Register/unregister vport representors on interface (for kernel >= 4.9) net/mlx5e: Do not reduce LRO WQE size when not using build_skb (for kernel >= 4.9) net/mlx5e: Fix broken CQE compression initialization (for kernel >= 4.9) net/mlx5e: Update MPWQE stride size when modifying CQE compress state (for kernel >= 4.7) net/mlx5e: Fix wrong CQE decompression (for kernel >= 4.7) ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tariq Toukan authored
In cqe compression with striding RQ, the decompression of the CQE field wqe_counter was done with a wrong wraparound value. This caused handling cqes with a wrong pointer to wqe (rx descriptor) and creating SKBs with wrong data, pointing to wrong (and already consumed) strides/pages. The meaning of the CQE field wqe_counter in striding RQ holds the stride index instead of the WQE index. Hence, when decompressing a CQE, wqe_counter should have wrapped-around the number of strides in a single multi-packet WQE. We dropped this wrap-around mask at all in CQE decompression of striding RQ. It is not needed as in such cases the CQE compression session would break because of different value of wqe_id field, starting a new compression session. Tested: ethtool -K ethxx lro off/on ethtool --set-priv-flags ethxx rx_cqe_compress on super_netperf 16 {ipv4,ipv6} -t TCP_STREAM -m 50 -D verified no csum errors and no page refcount issues. Fixes: 7219ab34 ("net/mlx5e: CQE compression") Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Reported-by:
Tom Herbert <tom@herbertland.com> Cc: kernel-team@fb.com Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Saeed Mahameed authored
When the admin enables/disables cqe compression, updating mpwqe stride size is required: CQE compress ON ==> stride size = 256B CQE compress OFF ==> stride size = 64B This is already done on driver load via mlx5e_set_rq_type_params, all we need is just to call it on arbitrary admin changes of cqe compression state via priv flags or when changing timestamping state (as it is mutually exclusive with cqe compression). This bug introduces no functional damage, it only makes cqe compression occur less often, since in ConnectX4-LX CQE compression is performed only on packets smaller than stride size. Tested: ethtool --set-priv-flags ethxx rx_cqe_compress on pktgen with 64 < pkt size < 256 and netperf TCP_STREAM (IPv4/IPv6) verify `ethtool -S ethxx | grep compress` are advancing more often (rapidly) Fixes: 7219ab34 ("net/mlx5e: CQE compression") Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Cc: kernel-team@fb.com Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tariq Toukan authored
Some of RQ type parameters are derived from CQE compression state flag, CQE compression flag was initialized only after RQ type parameters setup. This leads to load RQ with stride size smaller than what we want for when CQE compression is on. This bug introduces no functional damage, it only makes CQE compression occur less often, since in ConnectX4-LX CQE compression is performed only on packets smaller than stride size. Fix this by marking default status of CQE compression in PFLAG prior to calling mlx5e_set_rq_priv_params(), as it inits some fields based on it. Tested: load driver on systems where rx CQE compress will be on (MH) pktgen with 64 < pkt size < 256 and netperf TCP_STREAM (IPv4/IPv6) verify `ethtool -S ethxx | grep compress` are advancing more often (rapidly) Fixes: 2fc4bfb7 ("net/mlx5e: Dynamic RQ type infrastructure") Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Cc: kernel-team@fb.com Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tariq Toukan authored
When rq_type is Striding RQ, no room of SKB_RESERVE is needed as SKB allocation is not done via build_skb. Fixes: e4b85508 ("net/mlx5e: Slightly reduce hardware LRO size") Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Saeed Mahameed authored
Currently vport representors are added only on driver load and removed on driver unload. Apparently we forgot to handle them when we added the seamless reset flow feature. This caused to leave the representors netdevs alive and active with open HW resources on pci shutdown and on error reset flows. To overcome this we move their handling to interface attach/detach, so they would be cleaned up on shutdown and recreated on reset flows. Fixes: 26e59d80 ("net/mlx5e: Implement mlx5e interface attach/detach callbacks") Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Reviewed-by:
Hadar Hen Zion <hadarh@mellanox.com> Reviewed-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mohamad Haj Yahia authored
Add necessary headers include for s390 arch compilation. Fixes: e586b3b0 ("net/mlx5: Ethernet Datapath files") Fixes: d605d668 ("net/mlx5e: Add support for ethtool self..") Signed-off-by:
Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrew Price authored
We must hold the rcu read lock across looking up glocks and trying to bump their refcount to prevent the glocks from being freed in between. Cc: <stable@vger.kernel.org> # 4.3+ Signed-off-by:
Andrew Price <anprice@redhat.com> Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by:
Bob Peterson <rpeterso@redhat.com>
-