* clk-aspeed:
  clk: aspeed: Handle inverse polarity of USB port 1 clock gate
  clk: aspeed: Fix return value check in aspeed_cc_init()
  clk: aspeed: Add reset controller
  clk: aspeed: Register gated clocks
  clk: aspeed: Add platform driver and register PLLs
  clk: aspeed: Register core clocks
  clk: Add clock driver for ASPEED BMC SoCs
  dt-bindings: clock: Add ASPEED constants

* clk-lock-UP:
  clk: fix reentrancy of clk_enable() on UP systems

* clk-mediatek:
  clk: mediatek: adjust dependency of reset.c to avoid unexpectedly being built
  clk: mediatek: Fix all warnings for missing struct clk_onecell_data
  clk: mediatek: fixup test-building of MediaTek clock drivers
  clk: mediatek: group drivers under indpendent menu

* clk-allwinner:
  clk: sunxi-ng: a83t: Add M divider to TCON1 clock
  clk: sunxi-ng: fix the A64/H5 clock description of DE2 CCU
  clk: sunxi-ng: add support for Allwinner H3 DE2 CCU
  dt-bindings: fix the binding of Allwinner DE2 CCU of A83T and H3
  clk: sunxi-ng: sun8i: a83t: Use sigma-delta modulation for audio PLL
  clk: sunxi-ng: sun8i: a83t: Add /2 fixed post divider to audio PLL
  clk: sunxi-ng: Support fixed post-dividers on NM style clocks
  clk: sunxi-ng: sun50i: a64: Add 2x fixed post-divider to MMC module clocks
  clk: sunxi-ng: Support fixed post-dividers on MP style clocks
  clk: sunxi: Use PTR_ERR_OR_ZERO()

Merge branches 'clk-remove-asm-clkdev', 'clk-debugfs-fixes', 'clk-renesas' and 'clk-meson' into clk-next

* clk-remove-asm-clkdev:
  clk: Move __clk_{get,put}() into private clk.h API
  clk: sunxi: Use CLK_IS_CRITICAL flag for critical clks
  arch: Remove clkdev.h asm-generic from Kbuild
  clk: Prepare to remove asm-generic/clkdev.h
  blackfin: Use generic clkdev.h header

* clk-debugfs-fixes:
  clk: Simplify debugfs registration
  clk: Fix debugfs_create_*() usage
  clk: Show symbolic clock flags in debugfs
  clk: Improve flags doc for of_clk_detect_critical()

* clk-renesas:
  clk: renesas: r8a7796: Add FDP clock
  clk: renesas: cpg-mssr: Keep wakeup sources active during system suspend
  clk: renesas: mstp: Keep wakeup sources active during system suspend
  clk: renesas: r8a77970: Add LVDS clock

* clk-meson:
  clk: meson-axg: fix potential NULL dereference in axg_clkc_probe()
  clk: meson-axg: make local symbol axg_gp0_params_table static
  clk: meson-axg: fix return value check in axg_clkc_probe()
  clk: meson: mpll: use 64-bit maths in params_from_rate
  clk: meson-axg: add clock controller drivers
  clk: meson-axg: add clocks dt-bindings required header
  dt-bindings: clock: add compatible variant for the Meson-AXG
  clk: meson: make the spinlock naming more specific
  clk: meson: gxbb: remove IGNORE_UNUSED from mmc clocks
  clk: meson: gxbb: fix wrong clock for SARADC/SANA

* clk-divider-container:
  clk: divider: fix incorrect usage of container_of

Plus fixup sprd/div.c to pass the width too.

* clk-iproc:
  clk: iproc: Minor tidy up of iproc pll data structures
  clk: iproc: Allow plls to do minor rate changes without reset
  clk: iproc: Fix error in the pll post divider rate calculation
  clk: iproc: Allow iproc pll to runtime calculate vco parameters

* clk-mvebu:
  clk: mvebu: armada-37xx-periph: Use PTR_ERR_OR_ZERO()

* clk-qcom-a53:
  clk: qcom: Add APCS clock controller support
  clk: qcom: Add regmap mux-div clocks support
  clk: qcom: Add A53 PLL support

* clk-at91:
  clk: at91: pmc: Support backup for programmable clocks
  clk: at91: pmc: Save SCSR during suspend
  clk: at91: pmc: Wait for clocks when resuming

* clk-imx7ulp:
  clk: Don't touch hardware when reparenting during registration

* clk-axigen:
  clk: axi-clkgen: Round closest in round_rate() and recalc_rate()
  clk: axi-clkgen: Correctly handle nocount bit in recalc_rate()

* clk-si5351:
  clk: si5351: _si5351_clkout_reset_pll() can be static
  clk: si5351: Do not enable parent clocks on probe
  clk: si5351: Rename internal plls to avoid name collisions
  clk: si5351: Apply PLL soft reset before enabling the outputs
  clk: si5351: Add DT property to enable PLL reset
  clk: si5351: implement remove handler

* clk-pxa:
  clk: pxa: unbreak lookup of CLK_POUT

Merge branches 'clk-spreadtrum', 'clk-mvebu-dvfs', 'clk-qoriq', 'clk-imx' and 'clk-qcom-ipq8074' into clk-next

* clk-spreadtrum:
  clk: sprd: add clocks support for SC9860
  clk: sprd: Add dt-bindings include file for SC9860
  dt-bindings: Add Spreadtrum clock binding documentation
  clk: sprd: add adjustable pll support
  clk: sprd: add composite clock support
  clk: sprd: add divider clock support
  clk: sprd: add mux clock support
  clk: sprd: add gate clock support
  clk: sprd: Add common infrastructure
  clk: move clock common macros out from vendor directories

* clk-mvebu-dvfs:
  clk: mvebu: armada-37xx-periph: add DVFS support for cpu clocks
  clk: mvebu: armada-37xx-periph: prepare cpu clk to be used with DVFS
  clk: mvebu: armada-37xx-periph: cosmetic changes

* clk-qoriq:
  clk: qoriq: add more divider clocks support

* clk-imx:
  clk: imx51: uart4, uart5 gates only exist on imx50, imx53

* clk-qcom-ipq8074:
  clk: qcom: ipq8074: add misc resets for PCIE and NSS
  dt-bindings: clock: qcom: add misc resets for PCIE and NSS
  clk: qcom: ipq8074: add GP and Crypto clocks
  clk: qcom: ipq8074: add NSS ethernet port clocks
  clk: qcom: ipq8074: add NSS clocks
  clk: qcom: ipq8074: add PCIE, USB and SDCC clocks
  clk: qcom: ipq8074: add remaining PLL’s
  dt-bindings: clock: qcom: add remaining clocks for IPQ8074
  clk: qcom: ipq8074: fix missing GPLL0 divider width
  clk: qcom: add parent map for regmap mux
  clk: qcom: add read-only divider operations

Merge branches 'clk-qcom-alpha-pll', 'clk-check-ops-ptr', 'clk-protect-rate' and 'clk-omap' into clk-next

* clk-qcom-alpha-pll:
  clk: qcom: add read-only alpha pll post divider operations
  clk: qcom: support for 2 bit PLL post divider
  clk: qcom: support Brammo type Alpha PLL
  clk: qcom: support Huayra type Alpha PLL
  clk: qcom: support for dynamic updating the PLL
  clk: qcom: support for alpha mode configuration
  clk: qcom: flag for 64 bit CONFIG_CTL
  clk: qcom: fix 16 bit alpha support calculation
  clk: qcom: support for alpha pll properties

* clk-check-ops-ptr:
  clk: check ops pointer on clock register

* clk-protect-rate:
  clk: fix set_rate_range when current rate is out of range
  clk: add clk_rate_exclusive api
  clk: cosmetic changes to clk_summary debugfs entry
  clk: add clock protection mechanism to clk core
  clk: use round rate to bail out early in set_rate
  clk: rework calls to round and determine rate callbacks
  clk: add clk_core_set_phase_nolock function
  clk: take the prepare lock out of clk_core_set_parent
  clk: fix incorrect usage of ENOSYS

* clk-omap:
  clk: ti: Drop legacy clk-3xxx-legacy code

The USB port 1 clock gate control has an inversed polarity
from all the other clock gates in the chip. This makes the
aspeed_clk_{enable,disable} functions honor the flag
CLK_GATE_SET_TO_DISABLE and set that flag appropriately
so it's set for all clocks except USB port 1.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

In case of error, the function of_iomap() returns NULL pointer not
ERR_PTR(). The IS_ERR() test in the return value check should be
replaced with NULL test.

Fixes: a2e230c7b2ea ("clk: Add clock driver for ASPEED BMC SoCs")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

There are some resets that are not associated with gates. These are
represented by a reset controller.
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

The majority of the clocks in the system are gates paired with a reset
controller that holds the IP in reset.

This borrows from clk_hw_register_gate, but registers two 'gates', one
to control the clock enable register and the other to control the reset
IP. This allows us to enforce the ordering:

 1. Place IP in reset
 2. Enable clock
 3. Delay
 4. Release reset

There are some gates that do not have an associated reset; these are
handled by using -1 as the index for the reset.
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

This registers a platform driver to set up all of the non-core clocks.

The clocks that have configurable rates are now registered.
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

This registers the core clocks; those which are required to calculate
the rate of the timer peripheral so the system can load a clocksource
driver.
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

This adds the stub of a driver for the ASPEED SoCs. The clocks are
defined and the static registration is set up.
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Merge tag 'sunxi-clk-for-4.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-allwinner

Pull Allwinner clock changes from Chen-Yu Tsai:

 - Fix hardware description for the DE2 clocks on the A64 and H5 SoCs
 - Support DE2 clocks on the H3
 - Fix description for the TCON1 clock on A83T

All these are non-critical, as they have no users.

* tag 'sunxi-clk-for-4.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  clk: sunxi-ng: a83t: Add M divider to TCON1 clock
  clk: sunxi-ng: fix the A64/H5 clock description of DE2 CCU
  clk: sunxi-ng: add support for Allwinner H3 DE2 CCU
  dt-bindings: fix the binding of Allwinner DE2 CCU of A83T and H3

Changes from v1->v2:
Add 'select RESET_CONTROLLER' under COMMON_CLK_MEDIATEK and enable
reset.c to be built when COMMON_CLK_MEDIATEK is selected. That should
be quite reasonable because the reset controller is tightly embedded
inside and exported from these clock subsystems. At least it can be found
on infracfg and pericfg subsystem that both are really fundamental block
lots of devices must depend on.

commit 74cb0d6d ("clk: mediatek: fixup test-building of MediaTek clock
drivers") can let the build system looking into the directory where the
clock drivers resides and then allow test-building the drivers.

But the change also gives rise to certain incorrect behavior which is
reset.c being built even not depending on either COMPILE_TEST or
ARCH_MEDIATEK alternative dependency. To get rid of reset.c being built
unexpectedly on the other platforms, it would be a good change that the
file should be built depending on its own specific configuration rather
than just on generic RESET_CONTROLLER one.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Cc: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Reentrant calls to clk_enable() are not working on UP systems. This is
caused by the fact spin_trylock_irqsave() always returns true when
CONFIG_SMP=n (and CONFIG_DEBUG_SPINLOCK=n) which causes the reference
counting to not work correctly when clk_enable_lock() is called twice
before clk_enable_unlock() is called (this happens when clk_enable()
is called from within another clk_enable()).

This fixes the problem by skipping the call to spin_trylock_irqsave() on UP
systems and relying solely on reference counting. We also make sure to set
flags in this case so that we are not returning an uninitialized value.
Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

platform_get_resource() may return NULL, add proper
check to avoid potential NULL dereferencing.

This is detected by Coccinelle semantic patch.

@@
expression pdev, res, n, t, e, e1, e2;
@@

res = platform_get_resource(pdev, t, n);
+ if (!res)
+   return -EINVAL;
... when != res == NULL
e = devm_ioremap(e1, res->start, e2);
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Merge tag 'clk-renesas-for-v4.16-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas

Pull Renesas clk driver update from Geert Uytterhoeven:

  - Add support for the FDP1-0 module clock on R-Car M3-W

* tag 'clk-renesas-for-v4.16-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
  clk: renesas: r8a7796: Add FDP clock

We don't need a goto here. Drop it.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

When exposing data access through debugfs, the correct
debugfs_create_*() functions must be used, matching the data
types.

Remove all casts from data pointers passed to debugfs_create_*()
functions, as such casts prevent the compiler from flagging bugs.

clk_core.rate and .accuracy are "unsigned long", hence casting
their addresses to "u32 *" exposed the wrong halves on big-endian
64-bit systems. Fix this by using debugfs_create_ulong() instead.

Octal permissions are preferred, as they are easier to read than
symbolic permissions. Hence replace "S_IRUGO" by "0444"
throughout.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
[sboyd@codeaurora.org: Squash the octal change in too]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Currently the virtual "clk_flags" file in debugfs shows the numeric
value of the top-level framework flags for the specified clock.
Hence the user must manually interpret these values.

Moreover, on big-endian 64-bit systems, the wrong half of the value is
shown, due to the cast from "unsigned long *" to "u32 *".

Fix both issues by showing the symbolic flag names instead.
Any non-standard flags are shown as a hex number.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

This patch adds FDP1-0 clock to the R8A7796 SoC.
Signed-off-by: ABE Hiroshige <hiroshige.abe.zc@renesas.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[geert: s/fdp0/fdp1-0/]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

We can move these APIs into the private header file now that we
don't have any users of the __clk_get() and __clk_put() APIs
outside of clkdev.c and clk.c.

Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

We'd like to privatize __clk_get(), but the sunxi clk driver is
calling this function to keep a reference held on the clk and
call clk_prepare_enable() on it. We support this design in the
clk core now with the CLK_IS_CRITICAL flag, so let's just use
that instead.
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

The "flags" parameter passed to of_clk_detect_critical() cannot be a
pointer to a real clk_core.flags field, as clk_core is private to the
clock framework internals.

Change the comment to refer to top-level framework flags instead.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Now that every architecture is using the generic clkdev.h file
and we no longer include asm/clkdev.h anywhere in the tree, we
can remove it.

Cc: Russell King <linux@armlinux.org.uk>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: <linux-arch@vger.kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

TCON1 also has M divider, contrary to TCON0. And the mux is only
2 bits wide, instead of 3.

Fixes: 05359be1 ("clk: sunxi-ng: Add driver for A83T CCU")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
[wens@csie.org: Add description about mux width difference]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

Pull Amlogic clk driver update from Jerome Brunet:

 - Fix overflow in the mpll driver on 32bits arch

* tag 'meson-clk-for-v4.16-3' of git://github.com/BayLibre/clk-meson:
  clk: meson: mpll: use 64-bit maths in params_from_rate

Merge tag 'aspeed-4.16-clk-binding' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into HEAD

dt-bindings: Clock binding for ASPEED SoCs

This tag is required for the ARM SoC and clk trees in the 4.16 merge
window. It contains the clock binding header that is used by the ASPEED
clk driver and the device trees.

* tag 'aspeed-4.16-clk-binding' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
  dt-bindings: clock: Add ASPEED constants

Now that all the users of asm/clkdev.h have been replaced with
the generic file we can get rid of the asm-generic file as well
and implement that code directly where it's used.

We only have one caller of __clkdev_alloc(), in clkdev.c so we
can easily remove that and drop the include of asm/clkdev.h in
linux/clkdev.h by putting the __clk_get/__clk_put inlines in
their respective location.

Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

The generic header file is equivalent to the blackfin version, so
just use the generic one.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Add a driver for the APCS clock controller. It is part of the APCS
hardware block, which among other things implements also a combined
mux and half integer divider functionality. It can choose between a
fixed-rate clock or the dedicated APCS (A53) PLL. The source and the
divider can be set both at the same time.

This is required for enabling CPU frequency scaling on MSM8916-based
platforms.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
[sboyd@codeaurora.org: Include rcg header for parent_map, drop
multiple unneeded includes, add COMPILE_TEST to APCS depends,
made tristate/modular]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Add support for hardware that can switch both parent clock and divider
at the same time. This avoids generating intermediate frequencies from
either the old parent clock and new divider or new parent clock and
old divider combinations.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
[sboyd@codeaurora.org: Change a comment style, drop parent_map in
favor of a u32 array instead, export symbols for clk_ops and mux
function]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

The CPUs on Qualcomm MSM8916-based platforms are clocked by two PLLs,
a primary (A53) CPU PLL and a secondary fixed-rate GPLL0. These sources
are connected to a mux and half-integer divider, which is feeding the
CPU cores.

This patch adds support for the primary CPU PLL which generates the
higher range of frequencies above 1GHz.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
[sboyd@codeaurora.org: Move to devm provider registration,
NUL terminate frequency table, made tristate/modular]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

The clocks of A64/H5 SoCs in the DE2 CCU is the same as the clocks in H3
DE2 CCU rather than the A83T DE2 CCU (the parent of them is the DE
module clock).

Fix this by change the clock descriptions to use the clocks of H3.

Fixes: 763c5bd0 ("clk: sunxi-ng: add support for DE2 CCU")
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

Allwinner H3 features a DE2 CCU like the one on A83T, however the
parent of the clocks is the DE module clock, not the PLL_DE clock.

Add support for it.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

The DE2 CCU is different on A83T and H3 -- the parent of the clocks on
A83T is PLL_DE but on H3 it's the DE module clock. This is not noticed
when I develop the DE2 CCU driver.

Fix the binding by using different compatibles for A83T and H3, adding
notes for the PLL_DE usage on A83T, and change the binding example's
compatible from A83T to H3 (as it specifies the DE module clock).

Fixes: ed74f8a8 ("dt-bindings: add binding for the Allwinner DE2 CCU")
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

divider_recalc_rate() is an helper function used by clock divider of
different types, so the structure containing the 'hw' pointer is not
always a 'struct clk_divider'

At the following line:
> div = _get_div(table, val, flags, divider->width);

in several cases, the value of 'divider->width' is garbage as the actual
structure behind this memory is not a 'struct clk_divider'

Fortunately, this width value is used by _get_val() only when
CLK_DIVIDER_MAX_AT_ZERO flag is set. This has never been the case so
far when the structure is not a 'struct clk_divider'. This is probably
why we did not notice this bug before

Fixes: afe76c8f ("clk: allow a clk divider with max divisor when zero")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Fix ptr_ret.cocci warnings:
drivers/clk/mvebu/armada-37xx-periph.c:362:1-3: WARNING: PTR_ERR_OR_ZERO can be used

Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR

Generated by: scripts/coccinelle/api/ptr_ret.cocci
Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>