As part of adding same test for GRE tunnel with IPv6 underlay, wrong
alignments were found, fix them.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

IPv6 underlay support was added, add test to check that "decap_error" trap
is triggered under the right conditions and that devlink counters increase.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add tests that check IPv6-in-IPv6, IPv4-in-IPv6 and MTU change of GRE
tunnel. The tests use hierarchical model - the tunnel is bound to a device
in a different VRF.

These tests can be run with TC_FLAG=skip_sw, so then they will verify
that packets go through hardware as part of enacp and decap phases.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add tests that check IPv6-in-IPv6, IPv4-in-IPv6 and MTU change of GRE
tunnel. The tests use flat model - overlay and underlay share the same VRF.

These tests can be run with TC_FLAG=skip_sw, so then they will verify
that packets go through hardware as part of enacp and decap phases.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add function that checks that at least X packets hit the tc rule.
There are cases that it is not possible to catch only the interesting
packets, so then, it is possible to send many packets and verify that at
least this amount of packets hit the rule.

This function will be used in the next patch for general tc rule that
can be used to test both software and hardware.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add TC_FLAG value to tests topology.
This flag supposed to be skip_sw/skip_hw which means do not filter by
software/hardware.

This can be useful for adding tests to forwarding directory, and be able
to verify that packets go through the hardware.

When the flag is not set or set to 'skip_hw', tests can still be executed
with veth pairs.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reuse the timeval compat code from core/sock to handle 32-bit and
64-bit timeval structures. Also introduce a new socket option define
to allow using y2038 safe timeval under 32-bit.

The existing behavior of sock_set_timeout and vsock's timeout setter
differ when the time value is out of bounds. vsocks current behavior
is retained at the expense of not being able to share the full
implementation.

This allows the LTP test vsock01 to pass under 32-bit compat mode.

Fixes: fe0c72f3 ("socket: move compat timeout handling into sock.c")
Signed-off-by: Richard Palethorpe <rpalethorpe@suse.com>
Cc: Richard Palethorpe <rpalethorpe@richiejp.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation for sharing the implementation of sock_get_timeout.
Signed-off-by: Richard Palethorpe <rpalethorpe@suse.com>
Cc: Richard Palethorpe <rpalethorpe@richiejp.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Stephen reported that ath11k was failing to build on m68k and xtensa:

In file included from <command-line>:0:0:
In function 'ath11k_peer_assoc_h_smps',
    inlined from 'ath11k_peer_assoc_prepare' at drivers/net/wireless/ath/ath11k/mac.c:2362:2:
include/linux/compiler_types.h:317:38: error: call to '__compiletime_assert_650' declared with attribute error: FIELD_GET: type of reg too small for mask
  _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
                                      ^
include/linux/compiler_types.h:298:4: note: in definition of macro '__compiletime_assert'
    prefix ## suffix();    \
    ^
include/linux/compiler_types.h:317:2: note: in expansion of macro '_compiletime_assert'
  _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
  ^
include/linux/build_bug.h:39:37: note: in expansion of macro 'compiletime_assert'
 #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
                                     ^
include/linux/bitfield.h:52:3: note: in expansion of macro 'BUILD_BUG_ON_MSG'
   BUILD_BUG_ON_MSG((_mask) > (typeof(_reg))~0ull,  \
   ^
include/linux/bitfield.h:108:3: note: in expansion of macro '__BF_FIELD_CHECK'
   __BF_FIELD_CHECK(_mask, _reg, 0U, "FIELD_GET: "); \
   ^
drivers/net/wireless/ath/ath11k/mac.c:2079:10: note: in expansion of macro 'FIELD_GET'
   smps = FIELD_GET(IEEE80211_HE_6GHZ_CAP_SM_PS,

Fix the issue by using le16_get_bits() to specify the size explicitly.

Fixes: 6f4d7030 ("ath11k: support SMPS configuration for 6 GHz")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Due to deadlocks in the networking subsystem spotted 12 years ago[1],
a workaround was put in place[2] to avoid taking the rtnl lock when it
was not available and restarting the syscall (back to VFS, letting
userspace spin). The following construction is found a lot in the net
sysfs and sysctl code:

  if (!rtnl_trylock())
          return restart_syscall();

This can be problematic when multiple userspace threads use such
interfaces in a short period, making them to spin a lot. This happens
for example when adding and moving virtual interfaces: userspace
programs listening on events, such as systemd-udevd and NetworkManager,
do trigger actions reading files in sysfs. It gets worse when a lot of
virtual interfaces are created concurrently, say when creating
containers at boot time.

Returning early without hitting the above pattern when the syscall will
fail eventually does make things better. While it is not a fix for the
issue, it does ease things.

[1] https://lore.kernel.org/netdev/49A4D5D5.5090602@trash.net/
    https://lore.kernel.org/netdev/m14oyhis31.fsf@fess.ebiederm.org/
    and https://lore.kernel.org/netdev/20090226084924.16cb3e08@nehalam/
[2] Rightfully, those deadlocks are *hard* to solve.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

PHYLIB device drivers must match by either numerical PHY ID or by their
.match_phy_device method. Matching by DT is not permitted.

Link: https://lore.kernel.org/r/2b1dc053-8c9a-e3e4-b450-eecdfca3fe16@gmail.comTested-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

On the MDIO bus, we have PHYLIB devices and drivers, and we have non-
PHYLIB devices and drivers. PHYLIB devices are MDIO devices that are
wrapped with a struct phy_device.

Trying to bind a MDIO device with a PHYLIB driver results in out-of-
bounds accesses as we attempt to access struct phy_device members. So,
let's prevent this by ensuring that the type of the MDIO device
(indicated by the MDIO_DEVICE_FLAG_PHY flag) matches the type of the
MDIO driver (indicated by the MDIO_DEVICE_IS_PHY flag.)

Link: https://lore.kernel.org/r/2b1dc053-8c9a-e3e4-b450-eecdfca3fe16@gmail.comTested-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

leaf classes of ETS qdiscs are served in strict priority or deficit round
robin (DRR), depending on the value of 'nstrict'. Since this value can be
changed while traffic is running, we need to be sure that the active list
of DRR classes can be updated at any time, so:

1) call INIT_LIST_HEAD(&alist) on all leaf classes in .init(), before the
   first packet hits any of them.
2) ensure that 'alist' is not overwritten with zeros when a leaf class is
   no more strict priority nor DRR (i.e. array elements beyond 'nbands').

Link: https://lore.kernel.org/netdev/YS%2FoZ+f0Nr8eQkzH@dcaratti.users.ipa.redhat.comSuggested-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Coverity complains of an uninitialized variable.

CID 120847 (#1 of 1): Uninitialized scalar variable (UNINIT)
3. uninit_use_in_call: Using uninitialized value *sw_platform_str when calling qed_dump_str_param. [show details]
1344        offset += qed_dump_str_param(dump_buf + offset,
1345                                     dump, "sw-platform", sw_platform_str);

Fix this by removing dead code that references sw_platform_str.

Fixes: 6c95dd8f ("qed: Update debug related changes")

Cc: Ariel Elior <aelior@marvell.com>
Cc: GR-everest-linux-l2@marvell.com
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Shai Malin <smalin@marvell.com>
Cc: Omkar Kulkarni <okulkarni@marvell.com>
Cc: Prabhakar Kushwaha <pkushwaha@marvell.com>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org (open list)
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eliminate the following coccicheck warning:
./drivers/net/dsa/rtl8366rb.c:1348:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
net: add a helpers for loading netdev->dev_addr from platform

Similarly to recently added device_get_ethdev_address()
and of_get_ethdev_address() create a helper for drivers
loading mac addr from platform data.

nvmem_get_mac_address() does not have driver callers
so instead of adding a helper there unexport it.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the new platform_get_ethdev_address() helper for the cases
where dev->dev_addr is passed in directly as the destination.

  @@
  expression dev, net;
  @@
  - eth_platform_get_mac_address(dev, net->dev_addr)
  + platform_get_ethdev_address(dev, net)
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 406f42fa ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.

There is a handful of drivers which pass netdev->dev_addr as
the destination buffer to eth_platform_get_mac_address().
Add a helper which takes a dev pointer instead, so it can call
an appropriate helper.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

nvmem_get_mac_address() is only called from of_net.c
we don't need the export.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
100GbE Intel Wired LAN Driver Updates 2021-10-07

Michal Swiatkowski says:

The following patch series introduces basic switchdev model
support in ice driver. Implement the following blocks of
switchdev framework:
- VF port representors creation
- control plane VSI definition
- exception path (a. k. a. "slow-path") - to allow a virtual
switch or linux bridge to receive any packet that doesn't match
any hw filter
- link state management of virtual ports
- query virtual port statistics

Hardware offload support in switchdev mode is out of scope of
this patchset. Devlink interface is used to toggle between
switchdev and legacy (the default) modes of the driver.

---
Note: This series includes the use enum ice_status, however, we have
patches in our queue to remove it from the driver [1]. We are working
through the patches that precede the removal series.

[1] https://patchwork.ozlabs.org/project/intel-wired-lan/list/?series=265957
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull nfsd fixes from Chuck Lever:
 "Bug fixes for NFSD error handling paths"

* tag 'nfsd-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  NFSD: Keep existing listeners on portlist error
  SUNRPC: fix sign error causing rpcsec_gss drops
  nfsd: Fix a warning for nfsd_file_close_inode
  nfsd4: Handle the NFSv4 READDIR 'dircount' hint being zero
  nfsd: fix error handling of register_pernet_subsys() in init_nfsd()

Pull ARM SoC fixes from Arnd Bergmann:
 "This is a larger than normal update for Arm SoC specific code, most of
  it in device trees, but also drivers and the omap and at91/sama7
  platforms:

   - There are four new entries to the MAINTAINERS file: Sven Peter and
     Alyssa Rosenzweig for Apple M1, Romain Perier for Mstar/sigmastar,
     and Vignesh Raghavendra for TI K3

   - Build fixes to address randconfig warnings in sharpsl, dove, omap1,
     and qcom platforms as well as the scmi and op-tee subsystems

   - Regression fixes for missing CONFIG_FB and other options for
     several defconfigs

   - Several bug fixes for the newly added Microchip SAMA7 platform,
     mostly regarding power management

   - Missing SMP barriers to protect accesses to SCMI virtio device

   - Regression fixes for TI OMAP, including a boot-time hang on am335x.

   - Lots of bug fixes for NXP i.MX, mostly addressing incorrect
     settings in devicetree files, and one revert for broken suspend.

   - Fixes for ARM Juno/Vexpress devicetree files, addressing a couple
     of schema warnings.

   - Regression fixes for qualcomm SoC specific drivers and devicetree
     files, reverting an mdt_loader change and at least pastially
     reverting some of the 5.15 DTS changes, plus some minor bugfixes"

* tag 'armsoc-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (64 commits)
  MAINTAINERS: Add Sven Peter as ARM/APPLE MACHINE maintainer
  MAINTAINERS: Add Alyssa Rosenzweig as M1 reviewer
  firmware: arm_scmi: Add proper barriers to scmi virtio device
  firmware: arm_scmi: Simplify spinlocks in virtio transport
  ARM: dts: omap3430-sdp: Fix NAND device node
  bus: ti-sysc: Use CLKDM_NOAUTO for dra7 dcan1 for errata i893
  ARM: sharpsl_param: work around -Wstringop-overread warning
  ARM: defconfig: gemini: Restore framebuffer
  ARM: dove: mark 'putc' as inline
  ARM: omap1: move omap15xx local bus handling to usb.c
  MAINTAINERS: Add Vignesh to TI K3 platform maintainership
  arm64: dts: imx8m*-venice-gw7902: fix M2_RST# gpio
  ARM: imx6: disable the GIC CPU interface before calling stby-poweroff sequence
  arm64: dts: ls1028a: fix eSDHC2 node
  arm64: dts: imx8mm-kontron-n801x-som: do not allow to switch off buck2
  ARM: dts: at91: sama7g5ek: to not touch slew-rate for SDMMC pins
  ARM: dts: at91: sama7g5ek: use proper slew-rate settings for GMACs
  ARM: at91: pm: preload base address of controllers in tlb
  ARM: at91: pm: group constants and addresses loading
  ARM: dts: at91: sama7g5ek: add suspend voltage for ddr3l rail
  ...

Apple SoC fixes for 5.15; just two MAINTAINERS updates.

- MAINTAINERS: Add Sven Peter as ARM/APPLE MACHINE maintainer
- MAINTAINERS: Add Alyssa Rosenzweig as M1 reviewer

* tag 'asahi-soc-fixes-5.15' of https://github.com/AsahiLinux/linux:
  MAINTAINERS: Add Sven Peter as ARM/APPLE MACHINE maintainer
  MAINTAINERS: Add Alyssa Rosenzweig as M1 reviewer

Link: https://lore.kernel.org/r/a50a9015-0e62-c451-4d0d-668233b35b85@marcan.stSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'scmi-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes

SCMI fixes for v5.15

A few fixes addressing:
- Kconfig dependency between VIRTIO and ARM_SCMI_PROTOCOL
- Link-time error with __exit annotation for virtio_scmi_exit
- Unnecessary nested irqsave/irqrestore spinlocks in virtio transport
- Missing SMP barriers to protect accesses to SCMI virtio device

* tag 'scmi-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  firmware: arm_scmi: Add proper barriers to scmi virtio device
  firmware: arm_scmi: Simplify spinlocks in virtio transport
  firmware: arm_scmi: Remove __exit annotation
  firmware: arm_scmi: Fix virtio transport Kconfig dependency

Link: https://lore.kernel.org/r/20211007102822.27886-1-sudeep.holla@arm.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'omap-for-v5.15/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes

Fixes for omaps for v5.15

Few regression fixes for omaps for the v5.15-rc cycle. There is a fix
for boot time hangs that can happen on some am335x devices that started
when the pruss devicetree nodes were added. The other fixes are less
critical:

- Fix compiler warning for sysc_init_soc() that got recently introduced

- Fix external abort for am335x pruss as otherwise some am335x will hang

- Use CLKDM_NOAUTO quirk also for dra7 dcan1

- Fix older NAND device node regression for omap3-sdp

* tag 'omap-for-v5.15/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: omap3430-sdp: Fix NAND device node
  bus: ti-sysc: Use CLKDM_NOAUTO for dra7 dcan1 for errata i893
  soc: ti: omap-prm: Fix external abort for am335x pruss
  bus: ti-sysc: Add break in switch statement in sysc_init_soc()

Link: https://lore.kernel.org/r/pull-1633609552-789682@atomide.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Pull netfslib, cachefiles and afs fixes from David Howells:

 - Fix another couple of oopses in cachefiles tracing stemming from the
   possibility of passing in a NULL object pointer

 - Fix netfs_clear_unread() to set READ on the iov_iter so that source
   it is passed to doesn't do the wrong thing (some drivers look at the
   flag on iov_iter rather than other available information to determine
   the direction)

 - Fix afs_launder_page() to write back at the correct file position on
   the server so as not to corrupt data

* tag 'misc-fixes-20211007' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: Fix afs_launder_page() to set correct start file position
  netfs: Fix READ/WRITE confusion when calling iov_iter_xarray()
  cachefiles: Fix oops with cachefiles_cull() due to NULL object

Merge tag 'perf-tools-fixes-for-v5.15-2021-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix plugin static linking with libopencsd on ARM and ARM64

 - Add missing -lstdc++ when linking with libopencsd

 - Add missing topdown metrics events to 'perf test attr'

 - Plug leak sys_event_tables list after processing JSON vendor events
   entries

 - Sync sound/asound.h copy with the kernel sources

* tag 'perf-tools-fixes-for-v5.15-2021-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf tests attr: Add missing topdown metrics events
  tools include UAPI: Sync sound/asound.h copy with the kernel sources
  perf build: Fix plugin static linking with libopencsd on ARM and ARM64
  perf build: Add missing -lstdc++ when linking with libopencsd
  perf jevents: Free the sys_event_tables list after processing entries

Introduce the following ethtool operations for VF's representor:
	-get_drvinfo
	-get_strings
	-get_ethtool_stats
	-get_sset_count
	-get_link

In all cases, existing operations were used with minor
changes which allow us to detect if ethtool op was called for
representor. Only VF VSI stats will be available for representor.

Implement ndo_get_stats64 for port representor. This will update
VF VSI stats and read them.
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Slow path means allowing packet to go from uplink to representor
and from representor to correct VF on Rx site and from VF to
representor and to uplink on Tx site.

To accomplish this driver, has to set correct Tx descriptor. When
packet is sent from representor to VF, destination should be
set to VF VSI. When packet is sent from uplink port destination
should be uplink to bypass switch infrastructure and send packet
outside.

On Rx site driver should check source VSI field from Rx descriptor
and based on that forward packed to correct netdev. To allow
this there is a target netdevs table in control plane VSI
struct.
Co-developed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

As resetting all VFs behaves mostly like creating new VFs also
eswitch infrastructure has to be recreated. The easiest way to
do that is to rebuild eswitch after resetting VFs.

Implement helper functions to start and stop all representors
queues. This is used to disable traffic on port representors.

In rebuild path:
- NAPI has to be disabled
- eswitch environment has to be set up
- new port representors have to be created, because the old
one had pointer to not existing VFs
- new control plane VSI ring should be remapped
- NAPI hast to be enabled
- rxdid has to be set to FLEX_NIC_2, because this descriptor id
support source_vsi, which is needed on control plane VSI queues
- port representors queues have to be started
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Only way to enable switchdev is to create VFs when the eswitch
mode is set to switchdev. Check if correct mode is set and
enable switchdev in function which creating VFs.

Disable switchdev when user change number of VFs to 0. Changing
eswitch mode back to legacy when VFs are created in switchdev
mode isn't allowed.

As switchdev takes care of managing filter rules, adding new
rules on VF is blocked.

In case of resetting VF driver has to update pointer in ice_repr
struct, because after reset VSI related things can change.
Co-developed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

New type of VSI has to be defined for switchdev control plane
VSI. Number of allocated Tx and Rx queue has to be equal to
amount of VFs, because each port representor should have one
Tx and Rx queue.

Also to not increase number of used irqs too much, control plane
VSI uses only one q_vector and handle all queues in one irq.
To allow handling all queues in one irq , new function to clean
msix for eswitch was introduced. This function will schedule napi
for each representor instead of scheduling it only for one like in
normal clean irq function.

Only one additional msix has to be requested. Always try to request
it in ice_ena_msix_range function.
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Switchdev environment has to be set up when user create VFs
and eswitch mode is switchdev. Release is done when user
delete all VFs.

Data path in this implementation is based on control plane VSI.
This VSI is used to pass traffic from port representors to
corresponding VFs and vice versa. Default TX rule has to be
added to forward packet to control plane VSI. This will redirect
packets from VFs which don't match other rules to control plane
VSI.

On RX side default rule is added on uplink VSI to receive all
traffic that doesn't match other rules. When setting switchdev
environment all other rules from VFs should be removed. Packet to
VFs will be forwarded by control plane VSI.

As VF without any mac rules can't send any packet because of
antispoof mechanism, VSI antispoof should be turned off on each VFs.

To send packet from representor to correct VSI, destination VSI
field in TX descriptor will have to be filled. Allow that by
setting destination override bit in control plane VSI security config.

Packet from VFs will be received on control plane VSI. Driver
should decide to which netdev forward the packet. Decision is
made based on src_vsi field from descriptor. There is a target
netdev list in control plane VSI struct which choose netdev
based on src_vsi number.
Co-developed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

There is no way to change default lan_en and lb_en flags while
adding new rule. Add function that allows changing these flags
on ICE_SW_LKUP_DFLT recipe and any rule id.

lan_en allows packet to go outside if rule is matched. Clearing
this bit will block packet from sending it outside.

lb_en allows packet to be forwarded to other VSI. Clearing
this bit will block packet from forwarding it to other VSI.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Implement functions to make setting VSI security config easier.
Main function ice_update_security fills security section field and
checks against error in updating VSI. Reset functions are responsible
for correct filling config according to user expectations.

This helper is needed because destination override is located in
this section. Driver has to set this bit to allow strering Tx packet
on VSI based on value in Tx descriptors.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

In switchdev driver shouldn't add MAC, VLAN and promisc
filters on iavf demand but should return success to not
break normal iavf flow.

Achieve that by creating table of functions pointer with
default functions used to parse iavf command. While parse
iavf command, call correct function from table instead of
calling function direct.

When port representors are being created change functions
in table to new one that behaves correctly for switchdev
puprose (ignoring new filters).

Change back to default ops when representors are being
removed.
Co-developed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Port representor is used to manage VF from host side. To allow
it each created representor registers netdevice with random hw
address. Also devlink port is created for all representors.

Port representor name is created based on switch id or managed
by devlink core if devlink port was registered with success.

Open and stop ndo ops are implemented to allow managing the VF
link state. Link state is tracked in VF struct.

Struct ice_netdev_priv is extended by pointer to representor
field. This is needed to get correct representor from netdev
struct mostly used in ndo calls.

Implement helper functions to check if given netdev is netdev of
port representor (ice_is_port_repr_netdev) and to get representor
from netdev (ice_netdev_to_repr).

As driver mostly will create or destroy port representors on all
VFs instead of on single one, write functions to add and remove
representor for each VF.

Representor struct contains pointer to source VSI, which is VSI
configured on VF, backpointer to VF, backpointer to netdev,
q_vector pointer and metadata_dst which will be used in data path.
Co-developed-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Keeping devlink port inside VSI data structure causes some issues.
Since VF VSI is released during reset that means that we have to
unregister devlink port and register it again every time reset is
triggered. With the new changes in devlink API it
might cause deadlock issues. After calling
devlink_port_register/devlink_port_unregister devlink API is going to
lock rtnl_mutex. It's an issue when VF reset is triggered in netlink
operation context (like setting VF MAC address or VLAN),
because rtnl_lock is already taken by netlink. Another call of
rtnl_lock from devlink API results in dead-lock.

By moving devlink port to PF/VF we avoid creating/destroying it
during reset. Since this patch, devlink ports are created during
ice_probe, destroyed during ice_remove for PF and created during
ice_repr_add, destroyed during ice_repr_rem for VF.
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Write set and get eswitch mode functions used by devlink
ops. Use new pf struct member eswitch_mode to track current
eswitch mode in driver.

Changing eswitch mode is only allowed when there are no
VFs created.

Create new file for eswitch related code.

Add config flag ICE_SWITCHDEV to allow user to choose if
switchdev support should be enabled or disabled.

Use case examples:
- show current eswitch mode ('legacy' is the default one)
[root@localhost]# devlink dev eswitch show pci/0000:03:00.1
pci/0000:03:00.1: mode legacy

- move to 'switchdev' mode
[root@localhost]# devlink dev eswitch set pci/0000:03:00.1 mode
switchdev
[root@localhost]# devlink dev eswitch show pci/0000:03:00.1
pci/0000:03:00.1: mode switchdev

- create 2 VFs
[root@localhost]# echo 2 > /sys/class/net/ens4f1/device/sriov_numvfs

- unsuccessful attempt to change eswitch mode while VFs are created
[root@localhost]# devlink dev eswitch set pci/0000:03:00.1 mode legacy
devlink answers: Operation not supported

- destroy VFs
[root@localhost]# echo 0 > /sys/class/net/ens4f1/device/sriov_numvfs

- restore 'legacy' mode
[root@localhost]# devlink dev eswitch set pci/0000:03:00.1 mode legacy
[root@localhost]# devlink dev eswitch show pci/0000:03:00.1
pci/0000:03:00.1: mode legacy
Co-developed-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>