- 17 Apr, 2021 19 commits
-
-
David Mosberger-Tang authored
The driver so far has always disabled CRC protection. This means any data corruption that occurrs during the SPI transfers could go undetected. This patch adds module parameters enable_crc7 and enable_crc16 to selectively turn on CRC7 (for command transfers) and CRC16 (for data transfers), respectively. The default configuration remains unchanged, with both CRC7 and CRC16 off. The performance impact of CRC was measured by running ttcp -t four times in a row on a SAMA5 device: CRC7 CRC16 Throughput: Standard deviation: ---- ----- ----------- ------------------- off off 1720 +/- 48 KB/s on off 1658 +/- 58 KB/s on on 1579 +/- 84 KB/s Signed-off-by:
David Mosberger-Tang <davidm@egauge.net> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210227172818.1711071-4-davidm@egauge.net
-
David Mosberger-Tang authored
After a DMA write to the WILC chip, check for and report any errors. This is based on code from the wilc driver in the linux-at91 repository. Signed-off-by:
-
David Mosberger-Tang authored
The WILC1000 protocol control register has bits for enabling the CRCs (CRC7 for commands and CRC16 for data) and to set the data packet size. Define symbolic names for those so the code is more easily understood. Signed-off-by:
-
David Mosberger-Tang authored
For CMD_SINGLE_READ and CMD_INTERNAL_READ, WILC may insert one or more zero bytes between the command response and the DATA Start tag (0xf3). This behavior appears to be undocumented in "ATWILC1000 USER GUIDE" (https://tinyurl.com/4hhshdts) but we have observed 1-4 zero bytes when the SPI bus operates at 48MHz and none when it operates at 1MHz. This code is derived from the equivalent code of the wilc driver in the linux-at91 repository. Signed-off-by:
-
Brian Norris authored
There are a few reasons not to dump SSIDs as-is in kernel logs: 1) they're not guaranteed to be any particular text encoding (UTF-8, ASCII, ...) in general 2) it's somewhat redundant; the BSSID should be enough to uniquely identify the AP/STA to which we're connecting 3) BSSIDs have an easily-recognized format, whereas SSIDs do not (they are free-form) 4) other common drivers (e.g., everything based on mac80211) get along just fine by only including BSSIDs when logging state transitions Additional notes on reason #3: this is important for the privacy-conscious, especially when providing tools that convey kernel logs on behalf of a user -- e.g., when reporting bugs. So for example, it's easy to automatically filter logs for MAC addresses, but it's much harder to filter SSIDs out of unstructured text. Signed-off-by:
Brian Norris <briannorris@chromium.org> Signed-off-by:
-
Dan Carpenter authored
The "ext->key_len" is a u16 that comes from the user. If it's over SCM_KEY_LEN (32) that could lead to memory corruption. Fixes: e0d369d1 ("[PATCH] ieee82011: Added WE-18 support to default wireless extension handler") Cc: stable@vger.kernel.org Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Stanislav Yakovlev <stas.yakovlev@gmail.com> Signed-off-by:
-
Guobin Huang authored
spinlock can be initialized automatically with DEFINE_SPINLOCK() rather than explicitly calling spin_lock_init(). Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Guobin Huang <huangguobin4@huawei.com> Signed-off-by:
-
wengjianfeng authored
some function's label meaningless, the label statement follows the goto statement, no other statements, so just remove it. Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
wengjianfeng <wengjianfeng@yulong.com> Signed-off-by:
-
Christophe JAILLET authored
The 'c2hcmd_lock' spinlock is only used to protect some __skb_queue_tail() and __skb_dequeue() calls. Use the lock provided in the skb itself and call skb_queue_tail() and skb_dequeue(). These functions already include the correct locking. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Christophe JAILLET authored
'rtl_get_tid_h()' is the same as 'ieee80211_get_tid()'. So this function can be removed to save a line of code. Signed-off-by:
-
Yang Li authored
Assigning value "3" to "rtlpriv->btcoexist.reg_bt_sco" here, but that stored value is overwritten before it can be used. Coverity reports this problem as CWE563: A value assigned to a variable is never used. drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c: rtl8188ee_bt_reg_init Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Signed-off-by:
-
Colin Ian King authored
Variable err is assigned -ENODEV followed by an error return path via label error_out that does not access the variable and returns with the -ENODEV error return code. The assignment to err is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Bhaskar Chowdhury authored
s/resovle/resolve/ s/broadcase/broadcast/ s/sytem/system/ Signed-off-by:
Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
wengjianfeng authored
some function's label meaningless, the return statement follows the goto statement, so just remove it. Signed-off-by:
Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by:
-
Ping-Ke Shih authored
The signal strength of 5G is quite low, so user can't connect to an AP far away. New parameters with new format and its parser are updated by the commit 84d26fda ("rtlwifi: Update 8821ae new phy parameters and its parser."), but some parameters are missing. Use this commit to update to the novel parameters that use new format. Fixes: 84d26fda ("rtlwifi: Update 8821ae new phy parameters and its parser") Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Tested-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Chen Lin authored
Remove the 'wsm_*' typedef as it is not used. Signed-off-by:
Chen Lin <chen.lin5@zte.com.cn> Signed-off-by:
-
Chen Lin authored
Remove the 'cw1200_wsm_handler' typedef as it is not used. Signed-off-by:
-
Kalle Valo authored
Merge tag 'iwlwifi-next-for-kalle-2021-04-12-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next iwlwifi patches for v5.13 * Add support for new FTM FW APIs; * Some CSA fixes; * Support for new HW family and other HW detection fixes; * Robustness improvement in the HW detection code; * One fix in PMF; * Some new regulatory features; * Support for passive scan in 6GHz; * Some improvements in the sync queue implementation; * Support for new devices; * Support for a new FW API command version; * Some locking fixes; * Bump the FW API version support for AX devices; * Some other small fixes, clean-ups and improvements. # gpg: Signature made Wed 14 Apr 2021 12:33:29 PM EEST using RSA key ID 1A3CC5FA # gpg: Good signature from "Luciano Roth Coelho (Luca) <luca@coelho.fi>" # gpg: aka "Luciano Roth Coelho (Intel) <luciano.coelho@intel.com>"
-
https://github.com/nbd168/wirelessKalle Valo authored
mt76 patches for 5.13 * code cleanup * mt7915/mt7615 decap offload support * driver fixes * mt7613 eeprom support * MCU code unification * threaded NAPI support * new device IDs * mt7921 device reset support * rx timestamp support # gpg: Signature made Tue 13 Apr 2021 12:11:25 AM EEST using DSA key ID 02A76EF5 # gpg: Good signature from "Felix Fietkau <nbd@nbd.name>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 75D1 1A7D 91A7 710F 4900 42EF D77D 141D 02A7 6EF5
-
- 14 Apr, 2021 21 commits
-
-
David S. Miller authored
Merge tag 'linux-can-next-for-5.13-20210414' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2021-04-14 this is a pull request of a single patch for net-next/master. Vincent Mailhol's patch fixes a NULL pointer dereference when handling error frames in the etas_es58x driver, which has been added in the previous PR. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
af_packet fanout uses RCU rules to ensure f->arr elements are not dismantled before RCU grace period. However, it lacks rcu accessors to make sure KCSAN and other tools wont detect data races. Stupid compilers could also play games. Fixes: dc99f600 ("packet: Add fanout support.") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
"Gong, Sishuai" <sishuai@purdue.edu> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Florian Fainelli authored
Some Ethernet switches might only be able to support disabling multicast snooping globally, which is an issue for example when several bridges span the same physical device and request contradictory settings. Propagate the return value of br_mc_disabled_update() such that this limitation is transmitted correctly to user-space. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5-updates-2021-04-13 mlx5 core and netdev driver updates 1) E-Switch updates from Parav, 1.1) Devlink parameter to control mlx5 metadata enablement for E-Switch 1.2) Trivial cleanups for E-Switch code 1.3) Dynamically allocate vport steering namespaces only when required 2) From Jianbo, Use variably sized data structures for Software steering 3) Several minor cleanups ==================== Signed-off-by: -
Michael Walle authored
Normally, the bootloader will already initialize the MAC address registers of the ENETC and the driver will just use them or generate a random one, if it is not initialized. Add a new way to provide the MAC address: via device tree. Besides the usual 'mac-address' property, there is also the possibility to fetch it via a NVMEM provider. The sl28 board stores the MAC address in the SPI NOR flash OTP region. Having this will allow linux to fetch the MAC address from there without being dependent on the bootloader. No in-tree boards have the device tree properties set, thus for these, this is a no-op. Signed-off-by:
Michael Walle <michael@walle.cc> Signed-off-by:
-
Wan Jiabing authored
Fix the following coccicheck warning: ./drivers/net/ethernet/sfc/enum.h:80:7-28: duplicated argument to | Signed-off-by:
Wan Jiabing <wanjiabing@vivo.com> Signed-off-by:
-
Paolo Abeni authored
the commit 1ddc3229 ("skbuff: remove some unnecessary operation in skb_segment_list()") introduces an issue very similar to the one already fixed by commit 53475c5d ("net: fix use-after-free when UDP GRO with shared fraglist"). If the GSO skb goes though skb_clone() and pskb_expand_head() before entering skb_segment_list(), the latter will unshare the frag_list skbs and will release the old list. With the reverted commit in place, when skb_segment_list() completes, skb->next points to the just released list, and later on the kernel will hit UaF. Note that since commit e0e3070a ("udp: properly complete L4 GRO over UDP tunnel packet") the critical scenario can be reproduced also receiving UDP over vxlan traffic with: NIC (NETIF_F_GRO_FRAGLIST enabled) -> vxlan -> UDP sink Attaching a packet socket to the NIC will cause skb_clone() and the tunnel decapsulation will call pskb_expand_head(). Fixes: 1ddc3229 ("skbuff: remove some unnecessary operation in skb_segment_list()") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Jiapeng Chong authored
Fix the following clang warning: drivers/atm/idt77252.c:1787:1: warning: unused function 'idt77252_fbq_level' [-Wunused-function]. Reported-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-nextDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2021-04-14 Not much this time: 1) Simplification of some variable calculations in esp4 and esp6. From Jiapeng Chong and Junlin Yang. 2) Fix a clang Wformat warning in esp6 and ah6. From Arnd Bergmann. Please pull or let me know if there are problems. ==================== Signed-off-by: -
Heiner Kallweit authored
This adds support for the [g|s]et_pauseparam ethtool ops. It considers that the chip doesn't support pause frame use in jumbo mode. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueDavid S. Miller authored
Tony Nguyen says: ==================== 10GbE Intel Wired LAN Driver Updates 2021-04-13 This series contains updates to ixgbe and ixgbevf driver. Jostar Yang adds support for BCM54616s PHY for ixgbe. Chen Lin removes an unused function pointer for ixgbe and ixgbevf. Bhaskar Chowdhury fixes a typo in ixgbe. ==================== Signed-off-by: -
Tan Tee Min authored
The Synopsis MAC controller supports auxiliary snapshot feature that allows user to store a snapshot of the system time based on an external event. This patch add supports to the above mentioned feature. Users will be able to triggered capturing the time snapshot from user-space using application such as testptp or any other applications that uses the PTP_EXTTS_REQUEST ioctl request. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by:
Tan Tee Min <tee.min.tan@intel.com> Co-developed-by:
Wong Vee Khee <vee.khee.wong@linux.intel.com> Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
David S. Miller authored
Ivan Bornyakov says: ==================== net: phy: marvell-88x2222: a couple of improvements First, there are some SFP modules that only uses RX_LOS for link indication. Add check that link is operational before actual read of line-side status. Second, it is invalid to set 10G speed without autonegotiation, according to phy_ethtool_ksettings_set(). Implement switching between 10GBase-R and 1000Base-X/SGMII if autonegotiation can't complete but there is signal in line. Changelog: v1 -> v2: * make checking that link is operational more friendly for trancievers without SFP cages. * split swapping 1G/10G modes into non-functional and functional commits for the sake of easier review. ==================== Signed-off-by: -
Ivan Bornyakov authored
Setting 10G without autonegotiation is invalid according to phy_ethtool_ksettings_set(). Thus, we need to set it during autonegotiation. If 1G autonegotiation can't complete for quite a time, but there is signal in line, switch line interface type to 10GBase-R, if supported, in hope for link to be established. And vice versa. If 10GBase-R link can't be established for quite a time, and autonegotiation is enabled, and there is signal in line, switch line interface type to appropriate 1G mode, i.e. 1000Base-X or SGMII, if supported. Signed-off-by:
Ivan Bornyakov <i.bornyakov@metrotek.ru> Signed-off-by:
-
Ivan Bornyakov authored
No functional changes, just move read link status routines below autonegotiation configuration to make future functional changes more distinct. Signed-off-by:
-
Ivan Bornyakov authored
Some SFP modules uses RX_LOS for link indication. In such cases link will be always up, even without cable connected. RX_LOS changes will trigger link_up()/link_down() upstream operations. Thus, check that SFP link is operational before actual read link status. If there is no SFP cage connected to the tranciever, check only PMD Recieve Signal Detect register. Signed-off-by:
-
Aya Levin authored
Allow to create an RQ which is not registered as an XDP RQ. For example: the trap-RQ doesn't register as an XDP RQ. Fixes: 869c5f92 ("net/mlx5e: Generalize open RQ") Signed-off-by:
Aya Levin <ayal@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Wenpeng Liang authored
There should be no spaces at the start of the line. Signed-off-by:
Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by:
Weihang Li <liweihang@huawei.com> Signed-off-by:
-
Wenpeng Liang authored
void function return statements are not generally useful. Signed-off-by:
-
Wenpeng Liang authored
There should be a blank lines after declarations. Signed-off-by:
-
Colin Ian King authored
The bit-wise and of the action field with MLX5_ACCEL_ESP_ACTION_DECRYPT is incorrect as MLX5_ACCEL_ESP_ACTION_DECRYPT is zero and not intended to be a bit-flag. Fix this by using the == operator as was originally intended. Addresses-Coverity: ("Logically dead code") Fixes: 7dfee4b1 ("net/mlx5: IPsec, Refactor SA handle creation and destruction") Signed-off-by:
-
