This is required for some of the clps711x series, so we're bringing in
the dependency explicitly.

By Linus Walleij (5) and others
via Linus Walleij
* depends/gpio-devel:
  GPIO: clps711x: use platform_device_unregister in gpio_clps711x_init()
  gpio/tc3589x: convert to use the simple irqdomain
  gpio/em: convert to linear IRQ domain
  gpio/mvebu: convert to use irq_domain_add_simple()
  gpio/tegra: convert to use linear irqdomain
  gpiolib: unlock on error in gpio_export()
  gpiolib: add gpio get direction callback support
  GPIO: clps711x: Fix direction logic for PORTD
  GPIO: clps711x: Fix return value for gpio_clps711x_get
  gpiolib: Refactor gpio_export
  GPIO: vt8500: Add extended gpio bank for WM8505/WM8650
  gpio: clps711x: delete local <mach/gpio.h> header
  GPIO: Add support for GPIO on CLPS711X-target platform
  DA9055 GPIO driver
  gpio/gpio-omap: Use existing pointer to struct device
  gpio/gpio-pl061: Covert to use devm_* functions
Signed-off-by: Olof Johansson <olof@lixom.net>

From Rob Herring:
Add cpuidle driver support for Calxeda Highbank SOC.

* tag 'highbank-cpuidle' of git://sources.calxeda.com/kernel/linux:
  cpuidle: add Calxeda SOC idle support

From Rob Herring:
Use common debug_ll_init function and remove the static mapping code
from mach-highbank.

* tag 'highbank-debugll-cleanup' of git://sources.calxeda.com/kernel/linux:
  ARM: highbank: use common debug_ll_io_init
  ARM: implement debug_ll_io_init()

From Pawel Moll:
* 'vexpress-clk-soc' of git://git.linaro.org/people/pawelmoll/linux:
  ARM: vexpress: Remove motherboard dependencies in the DTS files
  ARM: vexpress: Start using new Versatile Express infrastructure
  ARM: vexpress: Add config bus components and clocks to DTs
  mfd: Versatile Express system registers driver
  mfd: Versatile Express config infrastructure

From Mike Turquette:
* depends/clk:
  clk: Common clocks implementation for Versatile Express
  clk: Versatile Express clock generators ("osc") driver
  CLK: clk-twl6040: Initial clock driver for OMAP4+ McPDM fclk clock
  clk: fix return value check in sirfsoc_of_clk_init()
  clk: fix return value check in of_fixed_clk_setup()
  clk: ux500: Update sdmmc clock to 100MHz for u8500
  clk: ux500: Support prcmu ape opp voltage clock
  mfd: dbx500: Export prmcu_request_ape_opp_100_voltage
  clk: Don't return negative numbers for unsigned values with !clk
  clk: Fix documentation typos
  clk: Document .is_enabled op
  clk: SPEAr: Vco-pll: Fix compilation warning

Merge tag 'bcm2835-for-3.8-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi into next/soc

From Stephen Warren:
ARM: bcm2835: defconfig updates

procfs and sysfs are enabled in bcm2835_defconfig.

* tag 'bcm2835-for-3.8-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi:
  ARM: bcm2835: enable procfs and sysfs in defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'bcm2835-for-3.8-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi into next/soc

From Stephen Warren:
ARM: bcm2835: core SoC enhancements

A machine restart/reboot implementation is added. The GPIO/pinmux
controller is instantiated, and dummy gpio.h added.

* tag 'bcm2835-for-3.8-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi:
  ARM: bcm2835: enable GPIO/pinctrl
  ARM: bcm2835: implement machine restart hook
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'tegra-for-3.8-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/soc

From Stephen Warren:
ARM: tegra: defconfig update

Many new features are enabled in tegra_defconfig:

* BRCMFMAC: wlan driver, enable as module.
* MTD, MTD_CHAR, MTD_M25P80, SPI_TEGRA20_SLINK, CONFIG_SPI_TEGRA20_SFLASH
  to enable serial flash on Cardhu and TrimSlice.
* PWM/backlight features for use with tegradrm.
* tegradrm; Tegra's new display driver.
* CMA, so that tegradrm can allocate large buffers.
* SquashFS, which is used as the root filesystem on boards based on
  the Tamonten processor module.

* tag 'tegra-for-3.8-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
  ARM: tegra: defconfig updates

Merge tag 'tegra-for-3.8-cpuidle' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/soc

From Stephen Warren:
ARM: tegra: cpuidle enhancements

A cpuidle state "LP2" is added, which power-gates the CPUs. Support for
CPUs 1..n is essentially complete, although support for CPU0 could
benefit from future use of coupled-cpuidle or similar techniques.

A couple of very minor cleanups to cpuidle were included too.

This pull request is based on tegra-for-3.8-soc.

* tag 'tegra-for-3.8-cpuidle' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
  ARM: tegra: retain L2 content over CPU suspend/resume
  ARM: tegra30: cpuidle: add powered-down state for CPU0
  ARM: tegra30: flowctrl: add cpu_suspend_exter/exit function
  ARM: tegra30: clocks: add CPU low-power function into tegra_cpu_car_ops
  ARM: tegra30: common: enable csite clock
  ARM: tegra30: cpuidle: add powered-down state for secondary CPUs
  ARM: tegra: cpuidle: add CPU resume function
  ARM: tegra: cpuidle: separate cpuidle driver for different chips
  ARM: tegra: rename the file of "sleep-tXX" to "sleep-tegraXX"
  ARM: tegra: cpuidle: replace LP3 with ARM_CPUIDLE_WFI_STATE

Merge tag 'tegra-for-3.8-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/soc

From Stephen Warren:
ARM: tegra: core SoC code enhancements

Various small clock initialization table and driver changes to support
WiFi modules, SPI controllers, and host1x (graphics/display hardware).

Various AHB/APB-related clocks were added to the Tegra30 clock driver.

The level 2 cache initialization is now driven by data from device tree,
and the cache configuration tweaked.

AUXDATA is added to support SPI controllers and host1x.

Code to decode Tegra's "speedo" process identification fuses is added.

This pull request is based on tegra-for-3.8-cleanup.

* tag 'tegra-for-3.8-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: (26 commits)
  ARM: tegra: Add Tegra30 host1x clock support
  ARM: tegra: Add AUXDATA for Tegra30 host1x
  ARM: tegra: Add Tegra20 host1x clock support
  ARM: tegra: Add AUXDATA for Tegra20 host1x
  ARM: tegra: Tegra30 speedo-based process identification
  ARM: tegra: Add speedo-based process identification
  ARM: tegra: flexible spare fuse read function
  ARM: tegra: Implement 6395/1 for Tegra
  ARM: tegra: Add OF_DEV_AUXDATA for sflash driver in board dt
  ARM: tegra: enable data prefetch on L2
  ARM: tegra: Add OF_DEV_AUXDATA for SLINK driver in board dt
  ARM: tegra: common: using OF api for L2 cache init
  ARM: tegra: dt: add L2 cache controller
  ARM: tegra30: clocks: add AHB and APB clocks
  ARM: tegra: set up wlan clocks for tegra dt
  ARM: tegra: move irammap.h to mach-tegra
  ARM: tegra: move iomap.h to mach-tegra
  ARM: tegra: remove <mach/dma.h>
  ARM: tegra: move tegra-ahb.h out of arch/arm/mach-tegra/
  ARM: tegra: remove unnecessary includes of <mach/*.h>
  ...

From Maxime Ripard:
Allwinner SoC support for 3.8

* tag 'tags/sunxi-support-for-3.8' of git://github.com/mripard/linux:
  ARM: sunxi: Add entry to MAINTAINERS
  ARM: sunxi: Add device tree for the A13 and the Olinuxino board
  ARM: sunxi: Add earlyprintk support
  ARM: sunxi: Add basic support for Allwinner A1x SoCs
  irqchip: sunxi: Add irq controller driver
  clocksource: sunxi: Add Allwinner A1X Timer Driver
  clk: sunxi: Add dummy fixed rate clock for Allwinner A1X SoCs
Signed-off-by: Olof Johansson <olof@lixom.net>

In order to start upstreaming Broadcom SoC support, create
a starting hierarchy, arch and dts files.
The first support SoC family that is planned is the
BCM281XX (BCM11130/11140/11351/28145/28155) family of dual A9 mobile
SoC cores.
This code is just the skeleton code for get the machine upstreamed. It
has been made MULTIPLATFORM compatible.
Next steps
----------
Upstream a basic set of drivers - sufficient for a console boot to
ramdisk. These will includer timer, gpio, i2c drivers.
After this basic set, we will proceed with a more comprehensive set
of drivers for the 281XX SoC family.

v2 patch mods
--------
 - Remove l2x0_of_init call as there were problems with the code.
   A separate patch will be submitted with cache init code
 - Rename capri files and refs to bcm281xx-based names
 - Add bcm281xx binding doc
 - various misc cleanups

v3 patch mods
-------------
 - Remove extra #include lines
 - Remove remaining references to capri
 - dt uart chipset string added
 - cleaned up chip # references

v4 patch mods
-------------
 - swap order of compatible definitions for uart
 - fix typo

v5 patch mods
-------------
 - Rename bcm281xx to bcm11351 in dts+code,
   leaving references to bcm281xx only in help+comments.

v6 patch mods
-------------
 - fix typo in uart 'compatible' string
Signed-off-by: Christian Daudt <csd@broadcom.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

From Sekhar Nori:

SoC updates for DaVinci. Changes include:

1) Support for PRUSS UIO driver for DA850 SoC
   and related SRAM support updates.
2) Prepration for common clock migration
3) Serial support related changes for DA850 DT boot

* tag 'davinci-for-v3.8/soc' of git://gitorious.org/linux-davinci/linux-davinci:
  ARM: davinci: da8xx: add DA850 PRUSS support
  ARM: davinci: add platform hook to fetch the SRAM pool
  ARM: davinci: da850: changed SRAM allocator to shared ram.
  ARM: davinci: sram: switch from iotable to ioremapped regions
  uio: uio_pruss: replace private SRAM API with genalloc
  ARM: davinci: serial: provide API to initialze UART clocks
  ARM: davinci: convert platform code to use clk_prepare/clk_unprepare
Signed-off-by: Olof Johansson <olof@lixom.net>

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Stefan Roese <sr@denx.de>

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Stefan Roese <sr@denx.de>

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
CC: Thomas Gleixner <tglx@linutronix.de>

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: John Stultz <johnstul@us.ibm.com>

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Mike Turquette <mturquette@ti.com>

From Sascha Hauer <s.hauer@pengutronix.de>:

ARM i.MX SoC updates

based on imx-multiplatform branch.

* tag 'imx-soc' of git://git.pengutronix.de/git/imx/linux-2.6:
  ARM i.MX51 babbage: Add display support
  ARM i.MX6: Add IPU support
  ARM i.MX51: Add IPU support
  ARM i.MX53: Add IPU support
  ARM i.MX5: switch IPU clk support to devicetree bindings
  ARM i.MX6: fix ldb_di_sel mux
  ARM i.MX51: setup MIPI during startup
  mx2_camera: Fix regression caused by clock conversion
  ARM: clk-imx27: Add missing clock for mx2-camera
  ARM i.MX27: Fix low reference clock path
  ARM: dts: imx27-3ds: Remove local watchdog inclusion
  watchdog: Support imx watchdog on SOC_IMX53
  ARM: mach-imx: Support for DryIce RTC in i.MX53
  ARM : i.MX27 : split code for allocation of ressources of camera and eMMA
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The babbage board has a DVI-I output which allows to output analog
and digital signals simultaneously. This patch adds support for it
to the devicetree. The DDC signals are not wired up on the board, so
DRM will fall back on default VESA modes.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>

This adds the IPU devices to the devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>

This adds the IPU device to the devicetree along with the necessary pinctrl
settings for the parallel display outputs.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>

This adds the IPU device to the devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>

The i.MX5 clk support has platform based clock bindings for the
IPU. IPU support is devicetree only, so move them over to devicetree
based bindings. Also, enable MIPI clocks which do not have a device
associated with, but still need to be enabled to do graphics on
i.MX51.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>

This adds the mmdc_ch1 as a possible parent for the ldb_di clk.
According to the datasheet, this clock can be selected at this mux.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>

The MIPI interface has to be initialized for proper IPU support.
The MIPI officially is not supported, but still needs initialization.
This patch adds this to the SoC startup as all it does is poking
some magic values into registers for which we do not have documentation.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>

Since mx27 transitioned to the commmon clock framework in 3.5, the correct way
to acquire the csi clock is to get csi_ahb and csi_per clocks separately.

By not doing so the camera sensor does not probe correctly:

soc-camera-pdrv soc-camera-pdrv.0: Probing soc-camera-pdrv.0
mx2-camera mx2-camera.0: Camera driver attached to camera 0
ov2640 0-0030: Product ID error fb:fb
mx2-camera mx2-camera.0: Camera driver detached from camera 0
mx2-camera mx2-camera.0: MX2 Camera (CSI) driver probed, clock frequency: 66500000

Adapt the mx2_camera driver to the new clock framework and make it functional
again.
Tested-by: Gaëtan Carlier <gcembed@gmail.com>
Tested-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>

During the clock conversion for mx27 the "per4_gate" clock was missed to get
registered as a dependency of mx2-camera driver.

In the old mx27 clock driver we used to have:

DEFINE_CLOCK1(csi_clk, 0, NULL, 0, parent, &csi_clk1, &per4_clk);

,so does the same in the new clock driver
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The i.MX27 clock tree can either be driven from a 26MHz oscillator
or from a 32768Hz oscillator. The latter was not properly implemented,
the mux between these two pathes was missing. Add this mux and while
at it rename the 'prem' (premultiplier) clk to 'fpm' (Frequency
Pre-Multiplier) to better match the datasheet.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

imx27.dtsi already register the watchdog, so no need to do it in the board dts
file.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This patch fixes watchdog support after devicetree switch for imx53
Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This patch enables support for i.MX53 in addition to i.MX25 by providing a
dummy clock on i.MX53 since this one doesn't have a separate clock for internal
RTC but the driver requests one.
Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This is to prepare addition of m2m-emmapp driver otherwise
IMX_HAVE_PLATFORM_MX2_CAMERA must be declared even if only Post-Processor is
needed.

IMX_HAVE_PLATFORM_MX2_EMMA define has been added.

Changes since v1:
 - Add "select IMX_HAVE_PLATFORM_MX2_EMMA" for MACH_IMX27_VISSTRIM_M10 platform
   due to pending patch in linux-media tree that will call
   imx27_add_mx2_emmaprp().
Signed-off-by: Gaëtan Carlier <gcembed@gmail.com>
Acked-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

New options enabled:
* BRCMFMAC: wlan driver, enable as module.
* MTD, MTD_CHAR, MTD_M25P80, SPI_TEGRA20_SLINK, CONFIG_SPI_TEGRA20_SFLASH
  to enable serial flash on Cardhu and TrimSlice.
* PWM/backlight features for use with tegradrm.
* tegradrm; Tegra's new display driver.
* CMA, so that tegradrm can allocate large buffers.
* SquashFS, which is used as the root filesystem on boards based on
  the Tamonten processor module.
Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

The L2 RAM is in different power domain from the CPU cluster. So the
L2 content can be retained over CPU suspend/resume. To do that, we
need to disable L2 after the MMU is disabled, and enable L2 before
the MMU is enabled. But the L2 controller is in the same power domain
with the CPU cluster. We need to restore it's settings and re-enable
it after the power be resumed.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

This is a power gating idle mode. It support power gating vdd_cpu rail
after all cpu cores in "powered-down" status. For Tegra30, the CPU0 can
enter this state only when all secondary CPU is offline. We need to take
care and make sure whole secondary CPUs were offline and checking the
CPU power gate status. After that, the CPU0 can go into "powered-down"
state safely. Then shut off the CPU rail.

Be aware of that, you may see the legacy power state "LP2" in the code
which is exactly the same meaning of "CPU power down".

Base on the work by:
Scott Williams <scwilliams@nvidia.com>
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

The flow controller can help CPU to go into suspend mode (powered-down
state). When CPU go into powered-down state, it needs some careful
settings before getting into and after leaving. The enter and exit
functions do that by configuring appropriate mode for flow controller.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>